Fri May 15 07:28:15 UTC 202020200515072815

Hey folks, just a heads-up that PAM is about to be merged into the main tree.
We can't have it blocking other upgrades any longer. The config files could be
improved (adding support for pam_krb5 and pam_ldap, for example), but they'll
do for now. Have a good weekend, and enjoy these updates! :-)
a/aaa_elflibs-15.0-x86_64-23.txz:  Rebuilt.
  Upgraded: libcap.so.2.34, libelf-0.179.so, liblzma.so.5.2.5,
  libglib-2.0.so.0.6400.2, libgmodule-2.0.so.0.6400.2,
  libgobject-2.0.so.0.6400.2, libgthread-2.0.so.0.6400.2,
  liblber-2.4.so.2.10.13, libldap-2.4.so.2.10.13, libpcre2-8.so.0.10.0.
  Added temporarily in preparation for upgrading icu4c: libicudata.so.65.1,
  libicui18n.so.65.1, libicuio.so.65.1, libicutest.so.65.1, libicutu.so.65.1,
  libicuuc.so.65.1.
a/etc-15.0-x86_64-11.txz:  Rebuilt.
  /etc/passwd: Added ldap (UID 330).
  /etc/group: Added ldap (GID 330).
a/kernel-generic-5.4.41-x86_64-1.txz:  Upgraded.
a/kernel-huge-5.4.41-x86_64-1.txz:  Upgraded.
a/kernel-modules-5.4.41-x86_64-1.txz:  Upgraded.
a/pkgtools-15.0-noarch-33.txz:  Rebuilt.
  setup.services: added support for rc.openldap and rc.openvpn.
ap/hplip-3.20.5-x86_64-1.txz:  Upgraded.
d/kernel-headers-5.4.41-x86-1.txz:  Upgraded.
d/python-setuptools-46.3.0-x86_64-1.txz:  Upgraded.
d/python3-3.8.3-x86_64-1.txz:  Upgraded.
k/kernel-source-5.4.41-noarch-1.txz:  Upgraded.
n/openldap-2.4.50-x86_64-1.txz:  Added.
  This is a complete OpenLDAP package with both client and server support.
  Thanks to Giuseppe Di Terlizzi for help with the server parts.
n/openldap-client-2.4.50-x86_64-1.txz:  Removed.
x/mesa-20.0.7-x86_64-1.txz:  Upgraded.
isolinux/initrd.img:  Rebuilt.
kernels/*:  Upgraded.
testing/packages/PAM/hplip-3.20.5-x86_64-1_pam.txz:  Upgraded.
usb-and-pxe-installers/usbboot.img:  Rebuilt.

1 files changed, 7 insertions, 7 deletions

diff --git a/README.initrd b/README.initrd
index a265790d..73c2d86d 100644
--- a/README.initrd
+++ b/README.initrd
@@ -1,7 +1,7 @@
 
 Slackware initrd mini HOWTO
 by Patrick Volkerding, volkerdi@slackware.com
-Sun May 10 23:05:53 UTC 2020
+Fri May 15 07:03:45 UTC 2020
 
 This document describes how to create and install an initrd, which may be 
 required to use the 4.x kernel. Also see "man mkinitrd".
@@ -33,15 +33,15 @@ flexible to ship a generic kernel and a set of kernel modules for it.
 
 The easiest way to make the initrd is to use the mkinitrd script included 
 in Slackware's mkinitrd package. We'll walk through the process of 
-upgrading to the generic 5.4.40 Linux kernel using the packages
+upgrading to the generic 5.4.41 Linux kernel using the packages
 found in Slackware's slackware/a/ directory.
 
 First, make sure the kernel, kernel modules, and mkinitrd package are 
 installed (the current version numbers might be a little different, so 
 this is just an example):
 
-  installpkg kernel-generic-5.4.40-x86_64-1.txz
-  installpkg kernel-modules-5.4.40-x86_64-1.txz
+  installpkg kernel-generic-5.4.41-x86_64-1.txz
+  installpkg kernel-modules-5.4.41-x86_64-1.txz
   installpkg mkinitrd-1.4.11-x86_64-15.txz
 
 Change into the /boot directory:
@@ -52,7 +52,7 @@ Now you'll want to run "mkinitrd". I'm using ext4 for my root filesystem,
 and since the disk controller requires no special support the ext4 module
 will be the only one I need to load:
 
-  mkinitrd -c -k 5.4.40 -m ext4
+  mkinitrd -c -k 5.4.41 -m ext4
 
 This should do two things. First, it will create a directory
 /boot/initrd-tree containing the initrd's filesystem. Then it will
@@ -61,10 +61,10 @@ you could make some additional changes in /boot/initrd-tree/ and
 then run mkinitrd again without options to rebuild the image. That's
 optional, though, and only advanced users will need to think about that.
 
-Here's another example: Build an initrd image using Linux 5.4.40
+Here's another example: Build an initrd image using Linux 5.4.41
 kernel modules for a system with an ext4 root partition on /dev/sdb3:
 
-  mkinitrd -c -k 5.4.40 -m ext4 -f ext4 -r /dev/sdb3
+  mkinitrd -c -k 5.4.41 -m ext4 -f ext4 -r /dev/sdb3
 
 
 4. Now that I've built an initrd, how do I use it?