Slackware 14.0slackware-14.0

Wed Sep 26 01:10:42 UTC 2012
Slackware 14.0 x86_64 stable is released!

We're perfectionists here at Slackware, so this release has been a long
time a-brewing.  But we think you'll agree that it was worth the wait.
Slackware 14.0 combines modern components, ease of use, and flexible
configuration... our "KISS" philosophy demands it.

The ISOs are off to be replicated, a 6 CD-ROM 32-bit set and a
dual-sided
32-bit/64-bit x86/x86_64 DVD.  Please consider supporting the Slackware
project by picking up a copy from store.slackware.com.  We're taking
pre-orders now, and offer a discount if you sign up for a subscription.

Thanks to everyone who helped make this happen.  The Slackware team, the
upstream developers, and (of course) the awesome Slackware user
community.

Have fun!  :-)

1 files changed, 14 insertions, 14 deletions

diff --git a/README_CRYPT.TXT b/README_CRYPT.TXT
index d2b98029..0ea11b89 100644
--- a/README_CRYPT.TXT
+++ b/README_CRYPT.TXT
@@ -307,10 +307,10 @@ needed to unlock the root filesystem, so that the kernel can start the init
 program.  In the example command line below which creates the 'initrd.gz'

 image I assume that the root filesystem is 'ext3', we used the mapped device

 'cryptroot' for the root filesystem on the real partition '/dev/sdx1',

-and are running the Slackware 13.37 default SMP kernel '2.6.37.6-smp'

+and are running the Slackware 14.0 default SMP kernel '3.2.29-smp'

 and we did not use Logical Volumes (more about that in the next section):

 

-  # mkinitrd -c -k 2.6.37.6-smp -m ext3 -f ext3 -r cryptroot -C /dev/sdx1

+  # mkinitrd -c -k 3.2.29-smp -m ext3 -f ext3 -r cryptroot -C /dev/sdx1

 

 * The resulting initrd image will be written to the file '/boot/initrd.gz'

 by default.  We still need to tell lilo about this initrd. Open the

@@ -318,7 +318,7 @@ configuration file '/etc/lilo.conf' in an editor such as vi or pico -
 it should already have been generated by the 'liloconfig' part of setup.

 Look for the "Linux bootable partition config" and add a line for the initrd.

 We also need to change the kernel file to a generic kernel, because lilo

-is unable to combine the 'huge' kernels in Slackware 13.37 with an initrd

+is unable to combine the 'huge' kernels in Slackware 14.0 with an initrd

 image - it will complain about "The initial RAM disk is too big to fit

 between the kernel and the 15M-16M memory hole" if you try with a 'huge'

 kernel.  We can live with that, since the 'huge' kernels are not meant

@@ -326,7 +326,7 @@ for day-to-day use anyway.  They are meant to install Slackware on a wide
 range of computers and that is why they are 'huge'.  The linux part of

 '/etc/lilo.conf' should end up looking somewhat like this:

 

-image = /boot/vmlinuz-generic-smp-2.6.37.6-smp

+image = /boot/vmlinuz-generic-smp-3.2.29-smp

   initrd = /boot/initrd.gz

   root = /dev/mapper/cryptroot

   label = linux

@@ -367,7 +367,7 @@ One, you will need to enter a passphrase for every partition you have encrypted
 (except for the swap which Slackware encrypts with a random passphrase

 on every boot).  Two, the method used for encrypting the swap partition

 prohibits the use of the swap as a hibernation partition.  And since the

-initrd of Slackware 13.37 supports hibernation, it would be a shame not to be

+initrd of Slackware 14.0 supports hibernation, it would be a shame not to be

 able to use this feature on your laptop (which, because of it's portability,

 is the primary target for full disk encryption anyway).

 

@@ -490,10 +490,10 @@ stage of booting the kernel.  The initial ramdisk (initrd) contains a small
 filesystem with the tools needed to unlock the root filesystem, so that

 the kernel can start the init program.  In the example command line below

 which creates the 'initrd.gz' image I assume that you formatted the root

-filesystem as 'ext3', and will be running the Slackware 13.37 default SMP

-kernel '2.6.37.6-smp' :

+filesystem as 'ext3', and will be running the Slackware 14.0 default SMP

+kernel '3.2.29-smp' :

 

-  # mkinitrd -c -k 2.6.37.6-smp -m ext3 -f ext3 -r /dev/cryptvg/root -C /dev/sdx2 -L

+  # mkinitrd -c -k 3.2.29-smp -m ext3 -f ext3 -r /dev/cryptvg/root -C /dev/sdx2 -L

 

 NOTE: if you use a non-US keyboard and need to enter a passphrase during boot,

       this may be problematic if the keyboard mapping is US while Slackware

@@ -509,7 +509,7 @@ configuration file '/etc/lilo.conf' in an editor such as vi or pico -
 it should already have been generated by the 'liloconfig' part of setup.

 Look for the "Linux bootable partition config" and add a line for the initrd.

 We also need to change the kernel file to a generic kernel, because lilo

-is unable to combine the 'huge' kernels in Slackware 13.37 with an initrd

+is unable to combine the 'huge' kernels in Slackware 14.0 with an initrd

 image - it will complain about "The initial RAM disk is too big to fit

 between the kernel and the 15M-16M memory hole" if you try a 'huge'

 kernel.  We can live with that, since the 'huge' kernels are not meant

@@ -517,7 +517,7 @@ for day-to-day use anyway.  They are meant to install Slackware on a wide
 range of computers and that is why they are 'huge'.  The linux part of

 '/etc/lilo.conf' should end up looking somewhat like this:

 

-image = /boot/vmlinuz-generic-smp-2.6.37.6-smp

+image = /boot/vmlinuz-generic-smp-3.2.29-smp

   initrd = /boot/initrd.gz

   root = /dev/cryptvg/root

   label = linux

@@ -562,7 +562,7 @@ system, it will be used and you won't have to type a passphrase.
 requires you to use the "-K" parameter to mkinitrd to specify the USB stick's

 FAT-label or UUID, as well as the full path to the keyfile.  An example:

 

-  # mkinitrd -c -k 2.6.37.6-smp -m ext3 -f ext3 -r /dev/cryptvg/root -C /dev/sdx2 -L -K LABEL=TRAVELSTICK:/keys/alien.luks

+  # mkinitrd -c -k 3.2.29-smp -m ext3 -f ext3 -r /dev/cryptvg/root -C /dev/sdx2 -L -K LABEL=TRAVELSTICK:/keys/alien.luks

 

     The mkinitrd of Slackware 13.1 introduced this support for USB sticks as

 unlocking mechanism.  Alternatively, after the root filesystem is unlocked

@@ -621,7 +621,7 @@ support for this keyboard to your initrd.
 A mkinitrd helper script

 ------------------------

 

-    The mkinitrd package in Slackware 13.37 ships with a script called

+    The mkinitrd package in Slackware 14.0 ships with a script called

 'mkinitrd_command_generator.sh'.  If you run this script, it will analyze

 your Slackware configuration and make a smart suggestion about the 'mkinitrd'

 command you have to type in order to create an initrd.gz with all the bells

@@ -636,7 +636,7 @@ by yourself:
 It should emit a string like this (your system will probably give different

 parameter values):

 

-mkinitrd -c -k 2.6.37.6-smp -m ext3 -f ext3 -r /dev/cryptvg/root -C /dev/sdx2 -L

+mkinitrd -c -k 3.2.29-smp -m ext3 -f ext3 -r /dev/cryptvg/root -C /dev/sdx2 -L

 

 You can copy and paste this output to your command prompt, and add any other

 parameters you need such as "-h" to indicate a hibernation partition or

@@ -651,7 +651,7 @@ Good luck with your fresh Slackware installion on encrypted partition(s)!
 

 ==============================================================================

 Author:

-  Eric Hameleers <alien@slackware.com> 08-apr-2011

+  Eric Hameleers <alien@slackware.com> 18-sep-2012

 URLs:

   http://www.slackware.com/~alien/dokuwiki/doku.php?id=slackware:setup