Fri Sep 20 22:51:48 UTC 201920190920225148

ap/qpdf-9.0.1-x86_64-1.txz:  Upgraded.
l/glibmm-2.62.0-x86_64-1.txz:  Upgraded.
l/libusb-1.0.23-x86_64-1.txz:  Upgraded.
l/python-urllib3-1.25.5-x86_64-1.txz:  Upgraded.
n/bluez-5.51-x86_64-1.txz:  Upgraded.

6 files changed, 0 insertions, 318 deletions

diff --git a/slackware64/l/glib2/doinst.sh b/slackware64/l/glib2/doinst.sh
deleted file mode 100644
index a14f9606..00000000
--- a/slackware64/l/glib2/doinst.sh
+++ /dev/null
@@ -1,32 +0,0 @@
-# Handle the incoming configuration files:
-config() {
-  for infile in $1; do
-    NEW="$infile"
-    OLD="`dirname $NEW`/`basename $NEW .new`"
-    # If there's no config file by that name, mv it over:
-    if [ ! -r $OLD ]; then
-      mv $NEW $OLD
-    elif [ "`cat $OLD | md5sum`" = "`cat $NEW | md5sum`" ]; then
-      # toss the redundant copy
-      rm $NEW
-    fi
-    # Otherwise, we leave the .new copy for the admin to consider...
-  done
-}
-
-# Prepare the new configuration files
-for file in etc/profile.d/libglib2.csh.new etc/profile.d/libglib2.sh.new ; do
-  if test -e $(dirname $file)/$(basename $file .new) ; then
-    if [ ! -x $(dirname $file)/$(basename $file .new) ]; then
-      chmod 644 $file
-     else
-      chmod 755 $file
-    fi
-  fi
-  config $file
-done
-
-# Try to run these.  If they fail, no biggie.
-chroot . /usr/bin/glib-compile-schemas /usr/share/glib-2.0/schemas/ 1> /dev/null 2> /dev/null
-chroot . /usr/bin/gio-querymodules @LIBDIR@/gio/modules/ 1> /dev/null 2> /dev/null
-
diff --git a/slackware64/l/glib2/glib2.SlackBuild b/slackware64/l/glib2/glib2.SlackBuild
deleted file mode 100755
index 0c0783ed..00000000
--- a/slackware64/l/glib2/glib2.SlackBuild
+++ /dev/null
@@ -1,177 +0,0 @@
-#!/bin/bash
-
-# Copyright 2008, 2009, 2010, 2011, 2015, 2017, 2018  Patrick J. Volkerding, Sebeka, MN, USA
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
-#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
-#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-cd $(dirname $0) ; CWD=$(pwd)
-
-PKGNAM=glib2
-VERSION=${VERSION:-$(echo glib-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-1}
-
-NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
-
-# Automatically determine the architecture we're building on:
-if [ -z "$ARCH" ]; then
-  case "$( uname -m )" in
-    i?86) export ARCH=i586 ;;
-    arm*) export ARCH=arm ;;
-    # Unless $ARCH is already set, use uname -m for all other archs:
-       *) export ARCH=$( uname -m ) ;;
-  esac
-fi
-
-# If the variable PRINT_PACKAGE_NAME is set, then this script will report what
-# the name of the created package would be, and then exit. This information
-# could be useful to other scripts.
-if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
-  echo "$PKGNAM-$VERSION-$ARCH-$BUILD.txz"
-  exit 0
-fi
-
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-glib2
-
-if [ "$ARCH" = "i586" ]; then
-  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
-  LIBDIRSUFFIX=""
-elif [ "$ARCH" = "s390" ]; then
-  SLKCFLAGS="-O2"
-  LIBDIRSUFFIX=""
-elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2 -fPIC"
-  LIBDIRSUFFIX="64"
-else
-  SLKCFLAGS="-O2"
-  LIBDIRSUFFIX=""
-fi
-
-rm -rf $PKG
-mkdir -p $TMP $PKG/usr
-cd $TMP
-rm -rf glib-$VERSION
-tar xvf $CWD/glib-$VERSION.tar.?z* || exit 1
-cd glib-$VERSION || exit 1
-
-chown -R root:root .
-find . \
- \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
- -exec chmod 755 {} \; -o \
- \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
- -exec chmod 644 {} \;
-
-# Get the local timezone link from /etc/localtime-copied-from:
-zcat $CWD/glib2.slackware.localtime.diff.gz | patch -p1 --verbose || exit 1
-
-# Configure, build, and install:
-export CFLAGS="$SLKCFLAGS"
-export CXXFLAGS="$SLKCFLAGS"
-mkdir meson-build
-cd meson-build
-meson setup \
-  --prefix=/usr \
-  --libdir=lib${LIBDIRSUFFIX} \
-  --libexecdir=/usr/libexec \
-  --bindir=/usr/bin \
-  --sbindir=/usr/sbin \
-  --includedir=/usr/include \
-  --datadir=/usr/share \
-  --mandir=/usr/man \
-  --sysconfdir=/etc \
-  --localstatedir=/var \
-  --buildtype=release \
-  -Dselinux=disabled \
-  -Dfam=true \
-  -Dman=true \
-  -Dgtk_doc=true \
-  -Dinstalled_tests=false \
-  .. || exit 1
-  "${NINJA:=ninja}" $NUMJOBS || exit 1
-  DESTDIR=$PKG $NINJA install || exit 1
-cd ..
-
-# Don't ship .la files:
-rm -f $PKG/{,usr/}lib${LIBDIRSUFFIX}/*.la
-
-# Since meson isn't listening to options:
-rm -rf $PKG/usr/libexec/installed-tests
-rmdir $PKG/usr/libexec
-
-# Install profile scripts:
-mkdir -p $PKG/etc/profile.d/
-cp -a $CWD/libglib2.{csh,sh} $PKG/etc/profile.d/
-chown root:root $PKG/etc/profile.d/*
-chmod 755 $PKG/etc/profile.d/*
-mv $PKG/etc/profile.d/libglib2.csh $PKG/etc/profile.d/libglib2.csh.new
-mv $PKG/etc/profile.d/libglib2.sh $PKG/etc/profile.d/libglib2.sh.new
-
-find $PKG | xargs file | grep -e "executable" -e "shared object" \
-  | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
-
-# Compress and link manpages, if any:
-if [ -d $PKG/usr/man ]; then
-  ( cd $PKG/usr/man
-    for manpagedir in $(find . -type d -name "man*") ; do
-      ( cd $manpagedir
-        for eachpage in $( find . -type l -maxdepth 1) ; do
-          ln -s $( readlink $eachpage ).gz $eachpage.gz
-          rm $eachpage
-        done
-        gzip -9 *.?
-      )
-    done
-  )
-fi
-
-mkdir -p $PKG/usr/doc/glib-$VERSION
-cp -a \
-  AUTHORS COPYING* NEWS README* \
-  $PKG/usr/doc/glib-$VERSION
-  rm -f $PKG/usr/doc/glib-$VERSION/README.{in,win32}
-
-# Make links to the documentation in /usr/share/gtk-doc/:
-( cd $PKG/usr/doc/glib-$VERSION
-  for dir in $PKG/usr/share/gtk-doc/html/* ; do
-    ln -s /usr/share/gtk-doc/html/$(basename $dir) .
-  done
-)
-
-# If there's a ChangeLog, installing at least part of the recent history
-# is useful, but don't let it get totally out of control:
-if [ -r ChangeLog ]; then
-  DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION)
-  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
-  touch -r ChangeLog $DOCSDIR/ChangeLog
-fi
-
-# Trim down bloated NEWS file:
-if [ -r NEWS ]; then
-  DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION)
-  cat NEWS | head -n 1000 > $DOCSDIR/NEWS
-  touch -r NEWS $DOCSDIR/NEWS
-fi
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-zcat $CWD/doinst.sh.gz | sed "s,@LIBDIR@,/usr/lib${LIBDIRSUFFIX}," > $PKG/install/doinst.sh
-
-cd $PKG
-/sbin/makepkg -l y -c n --prepend $TMP/glib2-$VERSION-$ARCH-$BUILD.txz
-
diff --git a/slackware64/l/glib2/glib2.slackware.localtime.diff b/slackware64/l/glib2/glib2.slackware.localtime.diff
deleted file mode 100644
index 235632d1..00000000
--- a/slackware64/l/glib2/glib2.slackware.localtime.diff
+++ /dev/null
@@ -1,37 +0,0 @@
-From 4ac2d88f3153d8cdaa003601363e71f46820a187 Mon Sep 17 00:00:00 2001
-From: Patrick J. Volkerding <volkerdi@slackware.com>
-Date: Tue, 20 Nov 2018 13:26:57 -0600
-Subject: [PATCH] Also look at /etc/localtime-copied-from
-
-In Slackware, /etc/localtime is a copy of the local timezone file, not a
-symlink to it, but the latest glib expects a symlink (because that's been
-demanded by systemd and guess-who). So, if we find that /etc/localtime is
-not a symlink, consider /etc/localtime-copied-from next. On Slackware
-systems this will be a symlink to the local timezone file under
-/usr/share/zoneinfo. We still want to consider the possibility that
-/etc/localtime *is* a symlink first though, since that's an acceptable
-local system modification on Slackware.
-
---- ./glib/gtimezone.c.orig	2018-09-21 09:23:53.000000000 -0500
-+++ ./glib/gtimezone.c	2018-11-20 13:11:31.601643410 -0600
-@@ -440,6 +440,20 @@
- 
-       /* Resolve the actual timezone pointed to by /etc/localtime. */
-       resolved_identifier = g_file_read_link (filename, &read_link_err);
-+
-+      /* If we didn't get the timezone here (probably because
-+       * /etc/localtime is not a symlink), then we will try again using
-+       * /etc/localtime-copied-from, which on Slackware is a symlink to
-+       * the local timezone file. */
-+      if (resolved_identifier == NULL)
-+        {
-+          filename = g_strdup ("/etc/localtime-copied-from");
-+          g_clear_error (&read_link_err);
-+          resolved_identifier = g_file_read_link (filename, &read_link_err);
-+        }
-+
-+      /* Test that we got the resolved_identifier. If not, fall back on the
-+       * last option (/var/db/zoneinfo file, as found on FreeBSD) */
-       if (resolved_identifier == NULL)
-         {
-           gboolean not_a_symlink = g_error_matches (read_link_err,
diff --git a/slackware64/l/glib2/libglib2.csh b/slackware64/l/glib2/libglib2.csh
deleted file mode 100644
index a1b67561..00000000
--- a/slackware64/l/glib2/libglib2.csh
+++ /dev/null
@@ -1,27 +0,0 @@
-#!/bin/csh
-#
-# Description:  This script sets the environment variables G_FILENAME_ENCODING
-# and G_BROKEN_FILENAMES for the glib-2.0 library.
-#
-# G_FILENAME_ENCODING
-#       This environment variable can be set to a comma-separated list of
-#       character set names.  GLib assumes that filenames are encoded in the
-#       first character set from that list rather than in UTF-8.  The special
-#       token "@locale" can be used to specify the character set for the
-#       current locale.
-#
-# G_BROKEN_FILENAMES
-#       If this environment variable is set, GLib assumes that filenames are
-#       in the locale encoding rather than in UTF-8.
-
-# If the LANG you have set contains any form of "UTF", we will guess you are
-# using a UTF-8 locale.  Hopefully we're correct.
-echo $LANG | grep -iq UTF
-if ($status == 0) then
-  setenv G_FILENAME_ENCODING "@locale"
-endif
-
-# It doesn't hurt to export this since G_FILENAME_ENCODING takes priority
-# over G_BROKEN_FILENAMES:
-setenv G_BROKEN_FILENAMES 1
-
diff --git a/slackware64/l/glib2/libglib2.sh b/slackware64/l/glib2/libglib2.sh
deleted file mode 100644
index 9b9fdc69..00000000
--- a/slackware64/l/glib2/libglib2.sh
+++ /dev/null
@@ -1,26 +0,0 @@
-#!/bin/sh
-#
-# Description:  This script sets the environment variables G_FILENAME_ENCODING
-# and G_BROKEN_FILENAMES for the glib-2.0 library.
-#
-# G_FILENAME_ENCODING
-#       This environment variable can be set to a comma-separated list of
-#       character set names.  GLib assumes that filenames are encoded in the
-#       first character set from that list rather than in UTF-8.  The special
-#       token "@locale" can be used to specify the character set for the
-#       current locale.
-#
-# G_BROKEN_FILENAMES
-#       If this environment variable is set, GLib assumes that filenames are
-#       in the locale encoding rather than in UTF-8.
-
-# If the LANG you have set contains any form of "UTF", we will guess you are
-# using a UTF-8 locale.  Hopefully we're correct.
-if echo $LANG | grep -iq UTF ; then
-  export G_FILENAME_ENCODING="@locale"
-fi
-
-# It doesn't hurt to export this since G_FILENAME_ENCODING takes priority
-# over G_BROKEN_FILENAMES:
-export G_BROKEN_FILENAMES=1
-
diff --git a/slackware64/l/glib2/slack-desc b/slackware64/l/glib2/slack-desc
deleted file mode 100644
index 39a8f437..00000000
--- a/slackware64/l/glib2/slack-desc
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description. Line
-# up the first '|' above the ':' following the base package name, and the '|' on
-# the right side marks the last column you can put a character in. You must make
-# exactly 11 lines for the formatting to be correct. It's also customary to
-# leave one space after the ':'.
-
-     |-----handy-ruler------------------------------------------------------|
-glib2: glib2 (library of C routines)
-glib2:
-glib2: GLib is the low-level core library that forms the basis for projects
-glib2: such as GTK+ and GNOME. It provides data structure handling for C,
-glib2: portability wrappers, and interfaces for such runtime functionality as
-glib2: an event loop, threads, dynamic loading, and an object system.
-glib2:
-glib2: Homepage: https://www.gtk.org
-glib2:
-glib2:
-glib2: