Slackware 13.0slackware-13.0

Wed Aug 26 10:00:38 CDT 2009
Slackware 13.0 x86_64 is released as stable!  Thanks to everyone who
helped make this release possible -- see the RELEASE_NOTES for the
credits.  The ISOs are off to the replicator.  This time it will be a
6 CD-ROM 32-bit set and a dual-sided 32-bit/64-bit x86/x86_64 DVD.
We're taking pre-orders now at store.slackware.com.  Please consider
picking up a copy to help support the project.  Once again, thanks to
the entire Slackware community for all the help testing and fixing
things and offering suggestions during this development cycle.
As always, have fun and enjoy!  -P.

1 files changed, 168 insertions, 0 deletions

diff --git a/source/a/coreutils/coreutils.SlackBuild b/source/a/coreutils/coreutils.SlackBuild
new file mode 100755
index 00000000..bc043427
--- /dev/null
+++ b/source/a/coreutils/coreutils.SlackBuild
@@ -0,0 +1,168 @@
+#!/bin/sh
+
+# Copyright 2005-2009  Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PRGNAM=coreutils
+VERSION=${VERSION:-7.4}
+ARCH=${ARCH:-x86_64}
+BUILD=${BUILD:-1}
+
+NUMJOBS=${NUMJOBS:--j6}
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PRGNAM
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+elif [ "$ARCH" = "arm" ]; then
+  SLKCFLAGS="-O2 -march=armv4 -mtune=xscale"
+elif [ "$ARCH" = "armel" ]; then
+  SLKCFLAGS="-O2 -march=armv4t"
+fi
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP
+
+rm -rf $PRGNAM-$VERSION
+if [ -r $CWD/$PRGNAM-$VERSION.tar.gz ]; then
+  tar xf $CWD/$PRGNAM-$VERSION.tar.gz || exit 1
+elif [ -r $CWD/$PRGNAM-$VERSION.tar.bz2 ]; then
+  tar xf $CWD/$PRGNAM-$VERSION.tar.bz2 || exit 1
+elif [ -r $CWD/$PRGNAM-$VERSION.tar.xz ]; then
+  tar xf $CWD/$PRGNAM-$VERSION.tar.xz || exit 1
+elif [ -r $CWD/$PRGNAM-$VERSION.tar.lzma ]; then
+  tar xf $CWD/$PRGNAM-$VERSION.tar.lzma || exit 1
+else
+  exit 1
+fi
+
+cd $PRGNAM-$VERSION
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+# Patch in the uname for Linux enhancements
+zcat $CWD/$PRGNAM.uname.diff.gz | patch -p1 --verbose --backup --suffix=.orig || exit 1
+
+# Compilation with glibc version later than 2.3.2 needs the environment
+# variable DEFAULT_POSIX2_VERSION set to 199209.
+# Without the next line, the coreutils will start complaining about 'obsolete'
+# command switches, like "tail -20" will be considered obsolete.
+# This behaviour breaks many other packages... the 'obsolete' parameters are
+# too commonly used to disregard them.  Better to stick with the older more
+# widely accepted standards until things begin to demand the new way.
+
+CFLAGS="$SLKCFLAGS" \
+DEFAULT_POSIX2_VERSION=199209 \
+./configure \
+  --prefix=/usr \
+  --bindir=/bin \
+  --mandir=/usr/man \
+  --infodir=/usr/info \
+  --sysconfdir=/etc \
+  --build=$ARCH-slackware-linux
+
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" \
+  | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+
+# We have had the mktemp from debianutils included with Slackware for quite a
+# long time, and certain options are changed here, like changing -u to mean a
+# dry-run rather than to unlink the tempfile when finished.  Since this could
+# break existing scripts, unless someone can tell me a good reason why we
+# should start using a new version of mktemp, we will continue to use the
+# one we've been using.  If the new one starts to become expected, let me know.
+# We'll figure out what the best options are and go from there.
+mv $PKG/bin/mktemp $PKG/bin/mktemp-gnu
+mv $PKG/usr/man/man1/mktemp.1 $PKG/usr/man/man1/mktemp-gnu.1
+
+# This seems wrong, and it stomps on files in the ksh93 package, though I'm
+# not sure the placement of those is correct, either...  The ksh93 package
+# installs them as flat text files, while coreutils installs empty directories
+# Oh well, this is what we've done for years, and nobody's complained...
+rm -rf $PKG/usr/share/locale/*/LC_TIME
+
+# These are important enough that they should probably all go into /bin at this
+# point...   Having some of them unavailable when /usr isn't mounted is just a
+# source of unending bug reports for various third party applications.
+# Time to end those reports.  :-)
+mkdir -p $PKG/bin $PKG/usr/bin
+( cd $PKG/usr/bin
+  for file in ../../bin/* ; do
+    ln --verbose -sf $file .
+  done
+)
+
+# Add some defaults, although a very slack-like set of default options are built
+# into /bin/ls now anyway:
+mkdir -p $PKG/etc
+zcat $CWD/DIR_COLORS.gz > $PKG/etc/DIR_COLORS.new
+
+# Since dircolors no longer provides any default aliases these scripts
+# will be needed for ls to act as expected:
+mkdir -p $PKG/etc/profile.d
+zcat $CWD/coreutils-dircolors.csh.gz > $PKG/etc/profile.d/coreutils-dircolors.csh
+zcat $CWD/coreutils-dircolors.sh.gz > $PKG/etc/profile.d/coreutils-dircolors.sh
+chmod 755 $PKG/etc/profile.d/*
+
+# Remove things that are provided by other Slackware packages:
+for dupe in hostname kill su uptime ; do
+  rm -f $PKG/bin/${dupe} $PKG/usr/bin/${dupe} \
+    $PKG/usr/sbin/${dupe} $PKG/usr/man/man?/${dupe}.* ;
+done
+
+# Add ginstall links (there's still a lot of stuff that needs this to compile):
+( cd $PKG/bin ; ln -sf install ginstall )
+( cd $PKG/usr/bin ; ln -sf ../../bin/ginstall ginstall )
+( cd $PKG/usr/man/man1 ; ln -sf install.1 ginstall.1 )
+
+( cd $PKG/usr/man
+  find . -type f -exec gzip -9 {} \;
+  for i in $(find . -type l) ; do ln -s $(readlink $i).gz $i.gz ; rm $i ; done
+)
+
+rm -f $PKG/usr/info/dir
+gzip -9 $PKG/usr/info/*
+
+mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
+cp -a \
+  ABOUT-NLS AUTHORS COPYING* NEWS README THANKS THANKS-to-translators TODO \
+  $PKG/usr/doc/$PRGNAM-$VERSION
+
+mkdir -p $PKG/install
+zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+# Build the package:
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PRGNAM-$VERSION-$ARCH-$BUILD.txz
+