Slackware 13.0slackware-13.0

Wed Aug 26 10:00:38 CDT 2009
Slackware 13.0 x86_64 is released as stable!  Thanks to everyone who
helped make this release possible -- see the RELEASE_NOTES for the
credits.  The ISOs are off to the replicator.  This time it will be a
6 CD-ROM 32-bit set and a dual-sided 32-bit/64-bit x86/x86_64 DVD.
We're taking pre-orders now at store.slackware.com.  Please consider
picking up a copy to help support the project.  Once again, thanks to
the entire Slackware community for all the help testing and fixing
things and offering suggestions during this development cycle.
As always, have fun and enjoy!  -P.

4 files changed, 233 insertions, 0 deletions

diff --git a/source/a/dbus/dbus.SlackBuild b/source/a/dbus/dbus.SlackBuild
new file mode 100755
index 00000000..c761ce54
--- /dev/null
+++ b/source/a/dbus/dbus.SlackBuild
@@ -0,0 +1,111 @@
+#!/bin/sh
+# Copyright 2007, 2008  Robby Workman  <http://rlworkman.net>
+# Copyright 2007, 2008, 2009  Patrick Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PRGNAM=dbus
+VERSION=1.2.14
+ARCH=${ARCH:-x86_64}
+BUILD=${BUILD:-1}
+
+NUMJOBS=${NUMJOBS:-" -j7 "}
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PRGNAM
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+fi
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP
+rm -rf $PRGNAM-$VERSION
+tar xvf $CWD/$PRGNAM-$VERSION.tar.xz || exit 1
+cd $PRGNAM-$VERSION || exit 1
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --localstatedir=/var \
+  --mandir=/usr/man \
+  --infodir=/usr/info \
+  --docdir=/usr/doc/$PRGNAM-$VERSION \
+  --enable-shared=yes \
+  --enable-static=no \
+  --with-system-pid-file=/var/run/dbus/dbus.pid \
+  --with-system-socket=/var/run/dbus/system_bus_socket \
+  --with-init-scripts=slackware \
+  --build=$ARCH-slackware-linux
+
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" \
+  | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+
+( cd $PKG/usr/man
+  find . -type f -exec gzip -9 {} \;
+  for i in $( find . -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done
+)
+
+# Install a custom init script for dbus - the included one is not good for us
+rm $PKG/etc/rc.d/*
+zcat $CWD/rc.messagebus.gz > $PKG/etc/rc.d/rc.messagebus.new
+chmod 0755 $PKG/etc/rc.d/rc.messagebus.new
+
+# Let's not clobber existing config files
+mv $PKG/etc/dbus-1/session.conf $PKG/etc/dbus-1/session.conf.new
+mv $PKG/etc/dbus-1/system.conf $PKG/etc/dbus-1/system.conf.new
+
+# Fix some directory ownership
+chown messagebus $PKG/var/lib/dbus
+
+# Add documentation
+mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
+cp -a \
+  AUTHORS COPYING HACKING INSTALL NEWS README doc/*.{txt,html,dtd} \
+  $PKG/usr/doc/$PRGNAM-$VERSION
+find $PKG/usr/doc/$PRGNAM-$VERSION -type f -exec chmod 644 {} \;
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PRGNAM-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/source/a/dbus/doinst.sh b/source/a/dbus/doinst.sh
new file mode 100644
index 00000000..71c3d7a0
--- /dev/null
+++ b/source/a/dbus/doinst.sh
@@ -0,0 +1,24 @@
+config() {
+  NEW="$1"
+  OLD="$(dirname $NEW)/$(basename $NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r $OLD ]; then
+    mv $NEW $OLD
+  elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then
+    # toss the redundant copy
+    rm $NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+# Keep same perms on rc.messagebus.new:
+if [ -e etc/rc.d/rc.messagebus ]; then
+  cp -a etc/rc.d/rc.messagebus etc/rc.d/rc.messagebus.new.incoming
+  cat etc/rc.d/rc.messagebus.new > etc/rc.d/rc.messagebus.new.incoming
+  mv etc/rc.d/rc.messagebus.new.incoming etc/rc.d/rc.messagebus.new
+fi
+
+config etc/dbus-1/session.conf.new
+config etc/dbus-1/system.conf.new
+config etc/rc.d/rc.messagebus.new
+
diff --git a/source/a/dbus/rc.messagebus b/source/a/dbus/rc.messagebus
new file mode 100644
index 00000000..7b27eb59
--- /dev/null
+++ b/source/a/dbus/rc.messagebus
@@ -0,0 +1,80 @@
+#!/bin/sh
+#
+# messagebus:   The D-BUS systemwide message bus
+#
+# description:  This is a daemon which broadcasts notifications of system events \
+#               and other messages. See http://www.freedesktop.org/software/dbus/
+#
+# processname: dbus-daemon
+# pidfile: /var/run/dbus/pid
+
+# This is a modified version of the rc.messagebus script distributed with the
+# dbus sources.  Thanks to Don Tanner of the GWare <http://gware.org> Project
+# for most of the work involved      --Robby Workman <rworkman@slackware.com>
+
+
+PIDFILE=/var/run/dbus/dbus.pid
+
+start() {
+  if ! ps axc | grep -w dbus-daemon ; then
+    rm -f $(dirname $PIDFILE)/*
+    if [ -x /usr/bin/dbus-uuidgen -a -x /usr/bin/dbus-daemon ] ; then
+      echo "Starting system message bus:  /usr/bin/dbus-uuidgen --ensure ; /usr/bin/dbus-daemon --system"
+      /usr/bin/dbus-uuidgen --ensure
+      /usr/bin/dbus-daemon --system 1> /dev/null
+    fi
+  fi
+}
+
+stop() {
+  if [ -e "$PIDFILE" ]; then
+    echo "Stopping system message bus..."
+    pid=$(cat $PIDFILE)
+    kill $pid 1> /dev/null 2> /dev/null
+    # Just in case:
+    killall dbus-daemon 1> /dev/null 2> /dev/null
+    rm -f $PIDFILE
+  fi
+}
+
+reload() {
+  echo "Reloading system message bus configuration..."
+  if [ -e "$PIDFILE" ]; then
+    pid=$(cat $PIDFILE)
+    kill -HUP $pid
+  else
+    killall -HUP dbus-daemon
+  fi
+}
+
+status() {
+  if ps axc | grep -wq dbus-daemon 2>/dev/null ; then
+    echo "dbus-daemon is running."
+  else
+    echo "dbus is stopped."
+  fi
+}
+
+# See how we were called.
+case "$1" in
+  start)
+    start
+    ;;
+  stop)
+    stop
+    ;;
+  restart)
+    stop
+    start
+    ;;
+  reload)
+    reload
+    ;;
+  status)
+    status
+    ;;
+  *)
+    echo $"Usage: $0 {start|stop|restart|reload|status}"
+    ;;
+esac
+
diff --git a/source/a/dbus/slack-desc b/source/a/dbus/slack-desc
new file mode 100644
index 00000000..0610ab8d
--- /dev/null
+++ b/source/a/dbus/slack-desc
@@ -0,0 +1,18 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+    |-----handy-ruler------------------------------------------------------|
+dbus: dbus (D-Bus message bus system)
+dbus:
+dbus: D-Bus supplies both a system daemon (for events such as "new hardware
+dbus: device added" or "printer queue changed") and a per user login
+dbus: session daemon (for general IPC needs among user applications).
+dbus: Also, the message bus is built on top of a general one-to-one message
+dbus: passing framework, which can be used by any two apps to communicate
+dbus: directly (without going through the message bus daemon). 
+dbus:
+dbus:
+dbus: