Slackware 13.0slackware-13.0

Wed Aug 26 10:00:38 CDT 2009
Slackware 13.0 x86_64 is released as stable!  Thanks to everyone who
helped make this release possible -- see the RELEASE_NOTES for the
credits.  The ISOs are off to the replicator.  This time it will be a
6 CD-ROM 32-bit set and a dual-sided 32-bit/64-bit x86/x86_64 DVD.
We're taking pre-orders now at store.slackware.com.  Please consider
picking up a copy to help support the project.  Once again, thanks to
the entire Slackware community for all the help testing and fixing
things and offering suggestions during this development cycle.
As always, have fun and enjoy!  -P.

1 files changed, 131 insertions, 0 deletions

diff --git a/source/a/file/file.SlackBuild b/source/a/file/file.SlackBuild
new file mode 100755
index 00000000..aaa0ca41
--- /dev/null
+++ b/source/a/file/file.SlackBuild
@@ -0,0 +1,131 @@
+#!/bin/sh
+
+# Copyright 2005-2008, 2009  Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+VERSION=5.03
+ARCH=${ARCH:-x86_64}
+BUILD=${BUILD:-1}
+
+NUMJOBS=${NUMJOBS:--j7}
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-file
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+cd $TMP
+rm -rf file-$VERSION
+tar xvf $CWD/file-$VERSION.tar.?z* || exit 1
+cd file-$VERSION || exit 1
+
+# Make the default data directory /etc/file like it has always been:
+zcat $CWD/file.etc.file.diff.gz | patch -p1 --verbose || exit 1
+# This is needed after the patch above:
+autoreconf || exit 1
+
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \; -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \;
+
+# Don't spew warnings about using the flat text files
+zcat $CWD/file.quiet.diff.gz | patch -p1 -E --verbose || exit 1
+# I don't know what this one does
+zcat $CWD/file.short.diff.gz | patch -p1 -E --verbose || exit 1
+
+# Add zisofs and crda regulatory bin detection
+zcat $CWD/file.zisofs.magic.gz >> magic/Magdir/compress
+zcat $CWD/file.crdaregbin.magic.gz >> magic/Magdir/crdaregbin
+
+CFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --datadir=/etc \
+  --mandir=/usr/man \
+  --infodir=/usr/info \
+  --docdir=/usr/doc/file-$VERSION \
+  --enable-fsect-man5 \
+  --disable-static \
+  --build=$ARCH-slackware-linux
+
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+# Is file really this much of a processing bottleneck?  Doubtful.
+#
+# NOTE:  Benchmarked flat files vs. .mgc June 2009, found no measurable
+# difference on 3000+ files.
+#
+# If you really need these (let's say you're doing virus scanning
+# and this *would* speed things up quite a bit) you can create
+# the pre-parsed file yourself using file's -C option.
+rm -f $PKG/etc/file/magic.mgc
+mkdir -p $PKG/etc/file/magic
+cp -a magic/Magdir/* $PKG/etc/file/magic
+# After building, this works fine.  /etc/file/magic/ takes up 1.2M,
+# while the magic.mgc file is 1.7M.  Considering a difference of 500k,
+# and the potential speedup, I'm not sure it's worth the effort...
+# but it does make it easier for an admin to add a small chunk of
+# new magic.
+
+# IMHO, moving this sort of thing does not make sense.
+# We'll support both the traditional and new locations.
+# I hate to squat on a name as generic as "/etc/misc/",
+# but it wasn't my idea.
+( cd $PKG/etc ; ln -sf file misc )
+
+# Strip everything for good measure:
+find $PKG | xargs file | grep -e "executable" -e "shared object" \
+  | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+
+( cd $PKG/usr/man || exit 1
+  find . -type f -exec gzip -9 {} \;
+  for i in $(find . -type l) ; do ln -s $(readlink $i).gz $i.gz ; rm $i ; done
+)
+
+mkdir -p $PKG/usr/doc/file-$VERSION
+cp -a \
+  AUTHORS COPYING INSTALL MAINT NEWS README TODO \
+    $PKG/usr/doc/file-$VERSION
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+# Build the package:
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/file-$VERSION-$ARCH-$BUILD.txz
+