Slackware 13.0slackware-13.0

Wed Aug 26 10:00:38 CDT 2009
Slackware 13.0 x86_64 is released as stable!  Thanks to everyone who
helped make this release possible -- see the RELEASE_NOTES for the
credits.  The ISOs are off to the replicator.  This time it will be a
6 CD-ROM 32-bit set and a dual-sided 32-bit/64-bit x86/x86_64 DVD.
We're taking pre-orders now at store.slackware.com.  Please consider
picking up a copy to help support the project.  Once again, thanks to
the entire Slackware community for all the help testing and fixing
things and offering suggestions during this development cycle.
As always, have fun and enjoy!  -P.

5 files changed, 315 insertions, 0 deletions

diff --git a/source/a/mt-st/mt-st.SlackBuild b/source/a/mt-st/mt-st.SlackBuild
new file mode 100755
index 00000000..cbf44ec2
--- /dev/null
+++ b/source/a/mt-st/mt-st.SlackBuild
@@ -0,0 +1,82 @@
+#!/bin/sh
+
+# Copyright 2008, 2009  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+VERSION=${VERSION:-0.9b}
+ARCH=${ARCH:-x86_64}
+BUILD=${BUILD:-2}
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-mt-st
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+cd $TMP
+rm -rf mt-st-$VERSION
+tar xzvf $CWD/mt-st-$VERSION.tar.gz
+cd mt-st-$VERSION
+
+zcat $CWD/mt-st.config.diff.gz | patch -p1 --verbose || exit 1
+zcat $CWD/mt-st.man.diff.gz | patch -p1 --verbose || exit 1
+zcat $CWD/mt-st.sdlt.diff.gz | patch -p1 --verbose || exit 1
+
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \; -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \;
+
+sed -i -e 's#<linux/qic117.h>#"qic117.h"#' mtio.h || exit 1
+make || exit 1
+
+strip mt stinit
+mkdir -p $PKG/bin
+cat mt > $PKG/bin/mt-st
+chmod 755 $PKG/bin/mt-st
+( cd $PKG/bin ; ln -sf mt-st mt )
+mkdir -p $PKG/sbin
+cat stinit > $PKG/sbin/stinit
+chmod 755 $PKG/sbin/stinit
+mkdir -p $PKG/usr/man/man{1,8}
+cat mt.1 | gzip -9c > $PKG/usr/man/man1/mt-st.1.gz
+cat stinit.8 | gzip -9c > $PKG/usr/man/man8/stinit.8.gz
+
+( cd $PKG
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+)
+
+mkdir -p $PKG/usr/doc/mt-st-$VERSION
+cp -a \
+  COPYING README* *.lsm stinit.def.examples \
+  $PKG/usr/doc/mt-st-$VERSION
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+# Build the package:
+cd $PKG
+makepkg -l y -c n $TMP/mt-st-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/source/a/mt-st/mt-st.config.diff b/source/a/mt-st/mt-st.config.diff
new file mode 100644
index 00000000..756261b1
--- /dev/null
+++ b/source/a/mt-st/mt-st.config.diff
@@ -0,0 +1,172 @@
+--- mt-st-0.8/stinit.def.examples.configfiles	2002-09-23 19:02:21.000000000 +0200
++++ mt-st-0.8/stinit.def.examples	2005-04-07 08:21:01.732633520 +0200
+@@ -56,3 +56,169 @@
+ mode3 blocksize=0 density=1   #  800 bpi
+ }
+ 
++# DLT2000 / 2000XT
++manufacturer="QUANTUM" model = "DLT2000" {
++scsi2logical=1
++can-bsr
++auto-lock=0
++two-fms=0
++drive-buffering=1
++buffer-writes
++read-ahead=1
++async-writes=1
++can-partitions=0
++fast-mteom=1
++#
++# If your stinit supports the timeouts:
++timeout=3600 # 1 hour
++long-timeout=14400 # 4 hours
++#
++mode1 blocksize=0 density=0x81	# 10GB + compression on DLTtape III, 15+ with DLTtape IIIXT in 2000XT
++mode2 blocksize=0 density=0x80	# 10GB, no compression  on DLTtape III, 15 with DLTtape IIIXT in 2000XT
++mode3 blocksize=0 density=0x18  #  6GB, compression not available, on DLTtape III
++mode4 blocksize=0 density=0x17  #2.6GB, compression not available, on DLTtape III
++}
++
++# DLT4000
++manufacturer="QUANTUM" model = "DLT4000" {
++scsi2logical=1
++can-bsr
++auto-lock=0
++two-fms=0
++drive-buffering=1
++buffer-writes
++read-ahead=1
++async-writes=1
++can-partitions=0
++fast-mteom=1
++#
++# If your stinit supports the timeouts:
++timeout=3600 # 1 hour
++long-timeout=14400 # 4 hours
++#
++# Drive is backwards compatible, use older modes (e.g. from above) as required
++mode1 blocksize=0 density=0x83  # 20GB + compression
++mode2 blocksize=0 density=0x82  # 20GB, no compression
++mode3 blocksize=0 density=0x81	# 10GB + compression (DLT2000 mode) with DLTtape III, 15+ with DLTtape IIIXT in 2000XT
++mode4 blocksize=0 density=0x80	# 10GB, no compression  (DLT2000 mode) with DLTtape III, 15 with DLTtape IIIXT in 2000XT
++}
++
++# DLT7000
++manufacturer="QUANTUM" model = "DLT7000" {
++scsi2logical=1
++can-bsr
++auto-lock=0
++two-fms=0
++drive-buffering=1
++buffer-writes
++read-ahead=1
++async-writes=1
++can-partitions=0
++fast-mteom=1
++#
++# If your stinit supports the timeouts:
++timeout=3600 # 1 hour
++long-timeout=14400 # 4 hours
++#
++# Drive is backwards compatible, use older modes (e.g. from above) as required.
++mode1 blocksize=0 density=0x85  # 35GB + compression
++mode2 blocksize=0 density=0x84  # 35GB, no compression
++mode3 blocksize=0 density=0x83	# 20GB + compression (DLT4000 mode)
++mode4 blocksize=0 density=0x82	# 20GB, no compression (DLT4000 mode)
++}
++
++# DLT8000
++manufacturer="QUANTUM" model = "DLT8000" {
++scsi2logical=1
++can-bsr=1
++auto-lock=0
++two-fms=0
++drive-buffering=1
++buffer-writes
++read-ahead=1
++async-writes=1
++can-partitions=0
++fast-mteom=1
++#
++# If your stinit supports the timeouts:
++timeout=3600 # 1 hour
++long-timeout=14400 # 4 hours
++#
++# Drive is backwards compatible to DLT7000, use older modes (e.g. from above) as required. Modes <10GB (<0x19) not supported!
++mode1 blocksize=0 density=0x89	# 40GB + compression
++mode2 blocksize=0 density=0x88	# 40GB, no compression
++mode3 blocksize=0 density=0x85  # 35GB + compression (DLT7000 mode)
++mode4 blocksize=0 density=0x84  # 35GB, no compression (DLT7000 mode)
++}
++
++
++# SDLT220
++manufacturer="QUANTUM" model = "SuperDLT1" {
++scsi2logical=1
++can-bsr=1
++auto-lock=0
++two-fms=0
++drive-buffering=1
++buffer-writes
++read-ahead=1
++async-writes=1
++can-partitions=0
++fast-mteom=1
++#
++# If your stinit supports the timeouts:
++timeout=3600 # 1 hour
++long-timeout=14400 # 4 hours
++#
++# Drive is backwards read compatible to DLT4000/7000/8000. Mode settings are only required for writing, so no need to define any other modes here.
++mode1 blocksize=0 density=0x48 compression=1	# 110 GB + compression
++mode2 blocksize=0 density=0x48 compression=0	# 110 GB, no ompression
++}
++
++# SDLT320
++manufacturer="QUANTUM" model = "SDLT320" {
++scsi2logical=1
++can-bsr=1
++auto-lock=0
++two-fms=0
++drive-buffering=1
++buffer-writes
++read-ahead=1
++async-writes=1
++can-partitions=0
++fast-mteom=1
++#
++# If your stinit supports the timeouts:
++timeout=3600 # 1 hour
++long-timeout=14400 # 4 hours
++#
++# Drive is backwards write compatible to SDLT220 and read compatible to DLT4000/7000/8000. Mode settings are only required for writing, so we need only the SDL220/320 modes here
++mode1 blocksize=0 density=0x49 compression=1	# 160 GB + compression
++mode2 blocksize=0 density=0x49 compression=0	# 160 GB, no ompression
++mode3 blocksize=0 density=0x48 compression=1	# 110 GB + compression
++mode4 blocksize=0 density=0x48 compression=0	# 110 GB, no ompression
++}
++
++# SDLT600
++manufacturer="QUANTUM" model = "SDLT600" {
++scsi2logical=1
++can-bsr=1
++auto-lock=0
++two-fms=0
++drive-buffering=1
++buffer-writes
++read-ahead=1
++async-writes=1
++can-partitions=0
++fast-mteom=1
++#
++# If your stinit supports the timeouts:
++timeout=3600 # 1 hour
++long-timeout=14400 # 4 hours
++#
++# Drive is backwards read compatible to SDLT220/320 and VS160. Mode settings are only required for writing, so we need only the native SDLT600 mode here.
++mode1 blocksize=0 density=0x4a compression=1	# 300 GB + compression
++mode2 blocksize=0 density=0x4a compression=0	# 300 GB, no ompression
++mode3 blocksize=0 density=0x4a compression=1	# 300 GB + compression
++mode4 blocksize=0 density=0x4a compression=0	# 300 GB, no ompression
++}
++
diff --git a/source/a/mt-st/mt-st.man.diff b/source/a/mt-st/mt-st.man.diff
new file mode 100644
index 00000000..d22acefc
--- /dev/null
+++ b/source/a/mt-st/mt-st.man.diff
@@ -0,0 +1,31 @@
+--- mt-st-0.9b/mt.1.manfix	2005-08-21 20:53:50.000000000 +0200
++++ mt-st-0.9b/mt.1	2005-10-25 12:13:43.000000000 +0200
+@@ -48,20 +48,22 @@
+ files.
+ The tape is positioned on the first block of the next file.
+ .IP fsfm
+-Forward space
++Forward space past
+ .I count
+-files.
+-The tape is positioned on the last block of the previous file.
++file marks, then backward space one file record.
++This leaves the tape positioned on the last block of the file that is count-1
++files past the current file.
+ .IP bsf
+ Backward space
+ .I count
+ files.
+ The tape is positioned on the last block of the previous file.
+ .IP bsfm
+-Backward space
++Backward space past
+ .I count
+-files.
+-The tape is positioned on the first block of the next file.
++file marks, then forward space one file record.
++This leaves the tape positioned on the first block of the file that is count-1
++files before the current file.
+ .IP asf
+ The tape is positioned at the beginning of the
+ .I count
diff --git a/source/a/mt-st/mt-st.sdlt.diff b/source/a/mt-st/mt-st.sdlt.diff
new file mode 100644
index 00000000..8dd9fa9f
--- /dev/null
+++ b/source/a/mt-st/mt-st.sdlt.diff
@@ -0,0 +1,11 @@
+--- mt-st-0.7/mt.c.orig	Sat Feb 22 14:48:09 2003
++++ mt-st-0.7/mt.c	Sat Feb 22 14:50:21 2003
+@@ -220,6 +220,8 @@
+     {0x41, "DLT 40GB"},
+     {0x45, "QIC-3095-MC (TR-4)"},
+     {0x47, "TR-5"},
++    {0x48, "Quantum SDLT220"},
++    {0x49, "Quantum SDLT320"},
+     {0x80, "DLT 15GB uncomp. or Ecrix"},
+     {0x81, "DLT 15GB compressed"},
+     {0x82, "DLT 20GB uncompressed"},
diff --git a/source/a/mt-st/slack-desc b/source/a/mt-st/slack-desc
new file mode 100644
index 00000000..dda83093
--- /dev/null
+++ b/source/a/mt-st/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+     |-----handy-ruler------------------------------------------------------|
+mt-st: mt-st (controls magnetic tape drive operation)
+mt-st:
+mt-st: This mt originates from BSD NET-2.  Some Linux SCSI tape-specific
+mt-st: ioctls have been added to the original source and the man page has
+mt-st: been updated.  Although this mt program is tailored for SCSI tape, it
+mt-st: can also be used with the QIC-02 driver and hopefully with other Linux
+mt-st: tape drivers using the same ioctls (some of the commands may not work
+mt-st: with all drivers).
+mt-st:
+mt-st:
+mt-st: