Slackware 13.0slackware-13.0

Wed Aug 26 10:00:38 CDT 2009
Slackware 13.0 x86_64 is released as stable!  Thanks to everyone who
helped make this release possible -- see the RELEASE_NOTES for the
credits.  The ISOs are off to the replicator.  This time it will be a
6 CD-ROM 32-bit set and a dual-sided 32-bit/64-bit x86/x86_64 DVD.
We're taking pre-orders now at store.slackware.com.  Please consider
picking up a copy to help support the project.  Once again, thanks to
the entire Slackware community for all the help testing and fixing
things and offering suggestions during this development cycle.
As always, have fun and enjoy!  -P.

6 files changed, 303 insertions, 0 deletions

diff --git a/source/a/pcmciautils/config/60-pcmcia.rules b/source/a/pcmciautils/config/60-pcmcia.rules
new file mode 100644
index 00000000..677da01b
--- /dev/null
+++ b/source/a/pcmciautils/config/60-pcmcia.rules
@@ -0,0 +1,22 @@
+# PCMCIA devices:
+#
+# Very few CIS firmware entries (which we use for matching)
+# are so broken that we need to read out random bytes of it
+# instead of the manufactor, card or product ID. Then the
+# matching is done in userspace.
+ACTION=="add", SUBSYSTEM=="pcmcia", ENV{MODALIAS}=="?*", \
+		RUN+="/sbin/pcmcia-check-broken-cis"
+
+# However, the "weak" matching by func_id is only allowed _after_ modprobe
+# returns, so that "strong" matches have a higher priority.
+ACTION=="add", SUBSYSTEM=="pcmcia", ENV{MODALIAS}=="?*", \
+		RUN+="/bin/sh -c 'echo 1 > /sys/$DEVPATH/allow_func_id_match'"
+
+# PCMCIA sockets:
+#
+# modprobe the pcmcia bus module so that 16-bit PCMCIA devices work
+ACTION=="add", SUBSYSTEM=="pcmcia_socket", RUN+="/sbin/modprobe pcmcia"
+
+# if this is a PCMCIA socket which needs a resource database,
+# pcmcia-socket-startup sets it up
+ACTION=="add", SUBSYSTEM=="pcmcia_socket", RUN+="/sbin/pcmcia-socket-startup"
diff --git a/source/a/pcmciautils/config/config.opts b/source/a/pcmciautils/config/config.opts
new file mode 100644
index 00000000..5b8d5faf
--- /dev/null
+++ b/source/a/pcmciautils/config/config.opts
@@ -0,0 +1,71 @@
+#
+# Local PCMCIA Configuration File
+#
+#----------------------------------------------------------------------
+#
+# System resources available for PCMCIA cards
+#
+# NOTE: these settings have no effect on resources assigned to a
+# CardBus bridge device itself; this file only affects resources
+# assigned to cards.  Also, interrupt settings here will only affect
+# ISA bus interrupts assigned to 16-bit cards.  PCI interrupts
+# generally can't be reconfigured.
+#
+# With the kernel PCMCIA subsystem, these settings also have no effect
+# at all on resources used for 32-bit CardBus cards.  Those are set by
+# the PCI hotplug subsystem.
+#
+
+# These are the official ports to use from pcmcia-cs:
+#include port 0x100-0x4ff, port 0x800-0x8ff, port 0xc00-0xcff
+# However, ports 0x810-0x81f hurt on some DELL machines and
+# ports 0x3b0-0x3df hurt on some FSC machines, so we use this port
+# list instead:
+include port 0x100-0x3af, port 0x3e0-0x4ff, port 0xc00-0xcff
+
+include memory 0xc0000-0xfffff
+include memory 0xa0000000-0xa0ffffff, memory 0x60000000-0x60ffffff
+
+# High port numbers do not always work...
+# include port 0x1000-0x17ff
+
+# Extra port range for IBM Token Ring
+include port 0xa00-0xaff
+
+# Resources we should not use, even if they appear to be available
+
+# First built-in serial port
+exclude irq 4
+# Second built-in serial port
+#exclude irq 3
+# First built-in parallel port
+exclude irq 7
+
+#----------------------------------------------------------------------
+
+# Examples of options for loadable modules
+
+# To fix sluggish network with IBM ethernet adapter...
+#module "pcnet_cs" opts "mem_speed=600"
+
+# Options for IBM Token Ring adapters
+#module "ibmtr_cs" opts "mmiobase=0xd0000 srambase=0xd4000"
+
+# Options for Raylink/WebGear driver: uncomment only one line...
+# These are the default settings for use with the WebGear Windows driver:
+#module "ray_cs" opts "essid=NETWORK_NAME hop_dwell=128 beacon_period=256 translate=0"
+# Generic ad-hoc network
+#module "ray_cs" opts "essid=ADHOC_ESSID hop_dwell=128 beacon_period=256 translate=1"
+# Infrastructure network for older cards
+#module "ray_cs" opts "net_type=1 essid=ESSID1"
+# Infrastructure network for WebGear
+#module "ray_cs" opts "net_type=1 essid=ESSID1 translate=1 hop_dwell=128 beacon_period=256"
+
+# Options for WaveLAN/IEEE driver (AccessPoint mode)...
+#module "wvlan_cs" opts "station_name=MY_PC"
+# Options for WaveLAN/IEEE driver (ad-hoc mode)...
+#module "wvlan_cs" opts "port_type=3 channel=1 station_name=MY_PC"
+
+# Options for Xircom Netwave driver...
+#module "netwave_cs" opts "domain=0x100 scramble_key=0x0"
+
diff --git a/source/a/pcmciautils/config/rc.pcmcia b/source/a/pcmciautils/config/rc.pcmcia
new file mode 100755
index 00000000..1f21be84
--- /dev/null
+++ b/source/a/pcmciautils/config/rc.pcmcia
@@ -0,0 +1,65 @@
+#!/bin/sh
+#
+# rc.pcmcia: Script to initialize PCMCIA subsystem.
+#	     Based in an example found in cardmgr-to-pcmciautils.txt
+#	     and in Slackware rc.pcmcia found in pcmcia-cs package.
+#
+
+# Set this to the driver to use, one of:
+# probe, yenta_socket, i82365, i82092, pd6729, tcic, etc.
+#
+DRIVER=probe
+DRIVER_OPTS=
+
+case "$1" in
+	start)
+		echo "Starting PCMCIA services:"
+		fgrep -q pcmcia /proc/devices
+		if [ $? -ne 0 ] ; then
+			if [ "$DRIVER" = "probe" ]; then
+			   echo "  <Probing for PCIC: edit /etc/rc.d/rc.pcmcia>"
+			   for DRV in yenta_socket i82365 tcic ; do
+				/sbin/modprobe $DRV > /dev/null 2>&1
+				/sbin/pccardctl status | grep -q Socket && break 
+				/sbin/modprobe -r $DRV > /dev/null 2>&1
+			   done
+			else
+			echo "  <Loading PCIC: $DRIVER>"
+			   /sbin/modprobe $DRIVER $DRIVER_OPTS > /dev/null 2>&1
+			fi
+			/sbin/modprobe pcmcia > /dev/null 2>&1 # just in case it's not auto-loaded
+		else
+			echo "  <PCIC already loaded>"
+		fi
+		;;
+
+	stop)
+	        echo -n "Shutting down PCMCIA services: "
+		echo -n "cards "
+		/sbin/pccardctl eject
+		MODULES=`/sbin/lsmod | grep "pcmcia " | awk '{print $4}' | tr , ' '`
+		for i in $MODULES ; do
+			echo -n "$i "
+			/sbin/modprobe -r $i > /dev/null 2>&1
+		done
+		echo -n "pcmcia "
+		/sbin/modprobe -r pcmcia > /dev/null 2>&1
+		if [ "$DRIVER" = "probe" ]; then
+			for DRV in yenta_socket i82365 tcic ; do
+				grep -qw $DRV /proc/modules && modprobe -r $DRV && \
+					echo -n "$DRV " && break
+			done
+		else	
+			/sbin/modprobe -r $DRIVER > /dev/null 2>&1
+		fi
+		echo -n "rsrc_nonstatic "
+		/sbin/modprobe -r rsrc_nonstatic > /dev/null 2>&1
+		echo "pcmcia_core"
+		/sbin/modprobe -r pcmcia_core > /dev/null 2>&1
+		;;
+	
+	restart)
+		$0 stop
+		$0 start
+		;;
+esac
diff --git a/source/a/pcmciautils/doinst.sh b/source/a/pcmciautils/doinst.sh
new file mode 100644
index 00000000..d01ddb5c
--- /dev/null
+++ b/source/a/pcmciautils/doinst.sh
@@ -0,0 +1,13 @@
+config() {
+  NEW="$1"
+  OLD="$(dirname $NEW)/$(basename $NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r $OLD ]; then
+    mv $NEW $OLD
+  elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then # toss the redundant copy
+    rm $NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+config etc/rc.d/rc.pcmcia.new
+config etc/pcmcia/config.opts.new
diff --git a/source/a/pcmciautils/pcmciautils.SlackBuild b/source/a/pcmciautils/pcmciautils.SlackBuild
new file mode 100755
index 00000000..dcf70895
--- /dev/null
+++ b/source/a/pcmciautils/pcmciautils.SlackBuild
@@ -0,0 +1,113 @@
+#!/bin/sh
+
+# Slackware build script for pcmciautils
+
+# Copyright 2008, 2009  Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+VERSION=${VERSION:-015}
+ARCH=${ARCH:-x86_64}
+# parallel build will cause an error building ccdv:
+NUMJOBS=${NUMJOBS:-" -j1 "}
+BUILD=${BUILD:-2}
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-pcmciautils
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP
+rm -rf pcmciautils-$VERSION
+tar xvf $CWD/pcmciautils-$VERSION.tar.bz2
+cd pcmciautils-$VERSION
+chown -R root.root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+( cd $PKG
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | \
+    xargs strip --strip-unneeded 2> /dev/null
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | \
+    xargs strip --strip-unneeded 2> /dev/null
+)
+
+# Add some firmware:
+( cd $PKG
+  tar xvf $CWD/cis-cs-3.2.8.tar.gz
+  chown -R root:root lib
+)
+
+rm -rf $PKG/etc/*
+mkdir -p $PKG/etc/pcmcia $PKG/etc/rc.d $PKG/lib/udev/rules.d
+
+cp -a $CWD/config/rc.pcmcia $PKG/etc/rc.d/rc.pcmcia.new
+chown root:root $PKG/etc/rc.d/rc.pcmcia.new
+chmod 0755 $PKG/etc/rc.d/rc.pcmcia.new
+
+cp -a $CWD/config/config.opts $PKG/etc/pcmcia/config.opts.new
+chown root:root $PKG/etc/pcmcia/config.opts.new
+chmod 0644 $PKG/etc/pcmcia/config.opts.new
+
+cp -a udev/60-pcmcia.rules $PKG/lib/udev/rules.d/60-pcmcia.rules
+chown root:root $PKG/lib/udev/rules.d/60-pcmcia.rules
+chmod 0644 $PKG/lib/udev/rules.d/60-pcmcia.rules
+
+# Create some symlinks that the udev rules file wants
+( cd $PKG/lib/udev
+  ln -s ../../sbin/pcmcia-check-broken-cis .
+  ln -s ../../sbin/pcmcia-socket-startup .
+)
+
+mv $PKG/usr/share/man $PKG/usr
+rmdir $PKG/usr/share
+
+# Compress and if needed symlink the man pages:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+mkdir -p $PKG/usr/doc/pcmciautils-$VERSION
+cp COPYING* $PKG/usr/doc/pcmciautils-$VERSION
+
+mkdir $PKG/install
+zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/pcmciautils-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/source/a/pcmciautils/slack-desc b/source/a/pcmciautils/slack-desc
new file mode 100644
index 00000000..c9958af8
--- /dev/null
+++ b/source/a/pcmciautils/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+           |-----handy-ruler-------------------------------------------------------|
+pcmciautils: pcmciautils (Utilities for using PCMCIA cards with 2.6+ kernels)
+pcmciautils:
+pcmciautils: This package provides PCMCIA tools that replace the pcmcia-cs tools
+pcmciautils: used with the 2.4.x Linux kernel.  PCMCIA cards are commonly used
+pcmciautils: in laptops to provide expanded capabilities such as network
+pcmciautils: connections, modems, increased memory, and more.
+pcmciautils:
+pcmciautils:
+pcmciautils:
+pcmciautils:
+pcmciautils: