Slackware 13.0slackware-13.0

Wed Aug 26 10:00:38 CDT 2009
Slackware 13.0 x86_64 is released as stable!  Thanks to everyone who
helped make this release possible -- see the RELEASE_NOTES for the
credits.  The ISOs are off to the replicator.  This time it will be a
6 CD-ROM 32-bit set and a dual-sided 32-bit/64-bit x86/x86_64 DVD.
We're taking pre-orders now at store.slackware.com.  Please consider
picking up a copy to help support the project.  Once again, thanks to
the entire Slackware community for all the help testing and fixing
things and offering suggestions during this development cycle.
As always, have fun and enjoy!  -P.

7 files changed, 688 insertions, 0 deletions

diff --git a/source/a/pkgtools/manpages/explodepkg.8 b/source/a/pkgtools/manpages/explodepkg.8
new file mode 100644
index 00000000..3e11fddc
--- /dev/null
+++ b/source/a/pkgtools/manpages/explodepkg.8
@@ -0,0 +1,41 @@
+.\" -*- nroff -*-
+.ds g \" empty
+.ds G \" empty
+.\" Like TP, but if specified indent is more than half
+.\" the current line-length - indent, use the default indent.
+.de Tp
+.ie \\n(.$=0:((0\\$1)*2u>(\\n(.lu-\\n(.iu)) .TP
+.el .TP "\\$1"
+..
+.TH EXPLODEPKG 8 "21 May 1994" "Slackware Version 2.0.0"
+.SH NAME
+explodepkg \- Extract the contents of a tar+compression package (such as a Slackware
+software package) in the current directory.
+.SH SYNOPSIS
+.B explodepkg
+.BI package
+.BI [ 
+.BI package2, 
+.BI package3, 
+.BI ...
+.BI ]
+.SH DESCRIPTION
+.B explodepkg
+uncompresses and untars Slackware *.tgz (or .tbz, .tlz, .txz) packages (or any archive 
+that was created by
+compressing a tarfile with one of the supported compression utilities) in the current directory. It is not usually
+used to install packages, since it doesn't execute the installation scripts 
+in ./install or ./var/log/setup. The primary use for
+.B explodepkg
+is in package maintenance - exploding a package in a subdirectory, making fixes
+to it or upgrading the software, and then building the updated package with
+.B makepkg.
+.SH AUTHOR
+Patrick J. Volkerding <volkerdi@slackware.com>
+.SH "SEE ALSO"
+.BR tar(1),
+.BR gzip(1),
+.BR installpkg(8),
+.BR makepkg(8),
+.BR pkgtool(8), 
+.BR upgradepkg(8)
diff --git a/source/a/pkgtools/manpages/installpkg.8 b/source/a/pkgtools/manpages/installpkg.8
new file mode 100644
index 00000000..2d77f10e
--- /dev/null
+++ b/source/a/pkgtools/manpages/installpkg.8
@@ -0,0 +1,91 @@
+.\" -*- nroff -*-
+.ds g \" empty
+.ds G \" empty
+.\" Like TP, but if specified indent is more than half
+.\" the current line-length - indent, use the default indent.
+.de Tp
+.ie \\n(.$=0:((0\\$1)*2u>(\\n(.lu-\\n(.iu)) .TP
+.el .TP "\\$1"
+..
+.TH INSTALLPKG 8 "22 Nov 2001" "Slackware Version 8.1.0"
+.SH NAME
+installpkg \- install Slackware packages.
+.SH SYNOPSIS
+.B installpkg
+[
+.B \--warn
+]
+[
+.B \--md5sum
+]
+[
+.B \--root /otherroot
+]
+[
+.B \--infobox
+]
+[
+.B \--menu
+]
+[
+.B \--ask
+]
+[
+.B \--priority ADD|REC|OPT|SKP
+]
+[
+.B \--tagfile /somedir/tagfile
+]
+.BI packagename
+[
+.B packagename2 ...
+]
+.SH DESCRIPTION
+.B installpkg
+installs single or multiple *.tgz (or .tbz, .tlz, .txz) binary packages designed
+for use with the Slackware Linux distribution onto your system.
+.SH OPTIONS
+.TP
+.B \--warn packagename
+Generate a report to the standard output about which files and directories
+would be removed or overwritten if you install the package, but do not
+actually install it.
+.TP
+.B \--md5sum packagename
+Record the package md5sum in the metadata written in /var/log/packages.
+.TP
+.B \--root /otherroot
+Install using a location other than / (the default) as the root of the
+filesystem to install on.  In the example given, use /otherroot instead.  Setting
+the ROOT environment variable does the same thing.
+.TP
+.B \--infobox
+Use /bin/dialog to display an informational dialog as the package is installed.
+Primarily used when installpkg is called from other scripts.
+.TP
+.B \--menu
+Use /bin/dialog to display a menu asking the user if they would like to install the
+package(s) or not.  Generally used when installpkg is called from other scripts.
+.TP
+.B \--ask
+Used with -menu mode.  When selected, always ask if a package should be
+installed regardless of what the package's priority is.
+.TP
+.B \--priority ADD|REC|OPT|SKP
+When installing with the \-menu option, package priority levels (found in the file
+"tagfile" in the package directory) are used to automatically install (ADD) or 
+skip (SKP) a package, or to suggest recommended (REC) or optional (OPT) to the user
+if a menu is displayed.  If a priority is set on the command line, it will override
+the values set in the tagfile for the entire package list.
+.TP
+.B \--tagfile /somedir/tagfile
+Specify a different file to use for package priorities (in this example, /somedir/tagfile
+will be used).  The default is "tagfile" in the package's directory.
+.SH AUTHOR
+Patrick J. Volkerding <volkerdi@slackware.com>
+.SH "SEE ALSO"
+.BR makepkg(8),
+.BR removepkg(8),
+.BR explodepkg(8),
+.BR pkgtool(8), 
+.BR upgradepkg(8)
diff --git a/source/a/pkgtools/manpages/makepkg.8 b/source/a/pkgtools/manpages/makepkg.8
new file mode 100644
index 00000000..b280ce51
--- /dev/null
+++ b/source/a/pkgtools/manpages/makepkg.8
@@ -0,0 +1,135 @@
+.\" -*- nroff -*-
+.ds g \" empty
+.ds G \" empty
+.\" Like TP, but if specified indent is more than half
+.\" the current line-length - indent, use the default indent.
+.de Tp
+.ie \\n(.$=0:((0\\$1)*2u>(\\n(.lu-\\n(.iu)) .TP
+.el .TP "\\$1"
+..
+.TH MAKEPKG 8 "21 May 1994" "Slackware Version 2.0.0"
+.SH NAME
+makepkg \- make Slackware packages.
+.SH SYNOPSIS
+.B makepkg
+[
+.B -l, --linkadd y|n
+]
+[
+.B -c, --chown y|n
+]
+.BI packagename
+.SH DESCRIPTION
+.B makepkg
+creates a new Slackware compatible package.
+The package is constructed using the contents of the current directory and
+all subdirectories. If symbolic links exist, they will be converted to script
+code to recreate them when the package is installed. This code will be
+appended to the primary installation script 
+.B ( install/doinst.sh )
+, or, if that script does not exist it will be created with those contents.
+The package will be written out to the file
+.BI packagename
+which should be the full name, including the extension.  This is usually .tgz,
+but .tbz, .tlz, and .txz are also accepted.  The proper compression utility
+(gzip, bzip2, lzma, or xz) needs to be installed on the machine.
+.SH OPTIONS
+.TP
+.B \-l, --linkadd y|n
+If y, add any symbolic links found to the install script (doinst.sh) and
+delete them.  This is the recommended action.  If this option is not used,
+makepkg will prompt if symbolic links are found.
+.TP
+.B \-p, --prepend
+If this option is given, then any symbolic links added to doinst.sh will be
+prepended to the existing script.  This is useful for packages that contain
+shared libraries that need to be linked first because programs will use them
+later in the doinst.sh script.
+.TP
+.B \-c, --chown y|n
+If y, makepkg will reset all directory permissions to 755 and ownership to root:root.
+In general, you should have the permissions and ownerships worked out yourself, so
+relying on setting this option to y is somewhat sloppy.  It is not the default.  If an
+option is not provided, makepkg will prompt.
+.SH INSTALLATION SCRIPTS
+There are 3 types of installation scripts supported in the Slackware package
+system. 
+.TP
+The first is the 
+.B primary
+installation script. This is found in the subdirectory
+.B ./install
+and must have the name
+.B doinst.sh
+in order to be recognized. This ( and other install scripts ) should be written
+using the basic Bourne shell syntax recognized by the
+.B ash
+shell, since this is the shell that will be used to execute the script when
+installing from a Slackware install floppy. This is a common trap - beware of
+using
+.B bash
+syntax extensions, because the script will work fine when installed from the
+hard drive, but will bomb out when installed from floppy. If the package is
+for personal use, this isn't a problem. Be careful, though, if you plan to
+share your package with other users. The
+.B primary installation script
+is executed immediately after the package is installed with 
+.B installpkg, pkgtool, 
+or
+.B setup.
+.TP
+The second type of script is the
+.B configuration
+script. This is found in the subdirectory
+.B ./var/log/setup
+and must have a name that starts with
+.B setup.
+in order to be recongnized. An example is the timezone script: 
+.B /var/log/setup/setup.timeconfig. 
+These scripts are executed during the
+.B CONFIGURE
+phase of
+.B setup, 
+and are re-executed each time the user runs the
+.B CONFIGURE
+option from
+.B setup
+from then on.
+Typically, the user will go through this phase of setup following the 
+installation of all the packages. Anything that needs to be interactive
+should go in one of these scripts to avoid halting the package installation
+process during 
+.B setup. 
+.TP
+The third type of script is the
+.B onlyonce
+script. Like the name suggests, these are executed only once after the package
+is installed, in contrast to the standard
+.B configuration
+script. These scripts are also found in the
+.B ./var/log/setup
+directory and must have a name that starts with
+.B setup., 
+but in addition the name must contain the string
+.B onlyonce.
+An example might be a script with the name 
+.B /var/log/setup/setup.onlyonce.testscript
+.SH PACKAGE FORMAT
+.B makepkg
+uses GNU tar plus GNU gzip to create its packages. A simple way to 
+extract the contents of a package (without executing the installation
+scripts, of course) is to use a command like this:
+.TP
+explodepkg package.tgz
+.TP
+Or, something like this:
+.TP
+gzip -dc package.tgz | tar xvvf -
+.SH AUTHOR
+Patrick J. Volkerding <volkerdi@slackware.com>
+.SH "SEE ALSO"
+.BR installpkg(8),
+.BR explodepkg(8),
+.BR removepkg(8),
+.BR pkgtool(8), 
+.BR upgradepkg(8)
diff --git a/source/a/pkgtools/manpages/pkgtool.8 b/source/a/pkgtools/manpages/pkgtool.8
new file mode 100644
index 00000000..56e39217
--- /dev/null
+++ b/source/a/pkgtools/manpages/pkgtool.8
@@ -0,0 +1,95 @@
+.\" -*- nroff -*-
+.ds g \" empty
+.ds G \" empty
+.\" Like TP, but if specified indent is more than half
+.\" the current line-length - indent, use the default indent.
+.de Tp
+.ie \\n(.$=0:((0\\$1)*2u>(\\n(.lu-\\n(.iu)) .TP
+.el .TP "\\$1"
+..
+.TH PKGTOOL 8 "24 Nov 1995" "Slackware Version 3.1.0"
+.SH NAME
+pkgtool \- software package maintenance tool.
+.SH SYNOPSIS
+.B pkgtool
+.LP
+.B pkgtool
+[
+.B --sets #a#b#c#
+]
+[
+.B --source_mounted
+]
+[
+.B --ignore_tagfiles
+]
+[
+.B --tagfile tagfile
+]
+[
+.B --source_dir directory
+]
+[
+.B --target_dir directory
+]
+[
+.B --source_device device
+]
+.SH DESCRIPTION
+.B pkgtool
+is a menu-driven package maintenance tool provided with the Slackware Linux 
+distribution.  It allows the user to install, remove, or view
+software packages through an interactive
+system.  Pkgtool can also be used to re-run the menu-driven scripts normally
+executed at the end of a Slackware installation.  This is useful for doing
+basic reconfiguration (like changing the mouse type).
+.SH OPTIONS
+Most users will not want to use any options when running
+.B pkgtool.
+These are generally used only when
+.B pkgtool
+is run during the initial system installation.
+Feel free to try them, but be careful.
+.TP
+.B \--sets #A#B#C#
+Install the disk sets A, B, C. Seperate the disk set names by '#' symbols.
+.TP
+.B \--source_mounted
+When this flag is present, 
+.B pkgtool
+will not attempt to unmount and remount the source device with each disk.
+.TP
+.B \--ignore_tagfiles
+When this flag is present, 
+.B pkgtool
+will install every package encountered no matter what the tagfiles say.
+.TP
+.B \--tagfile tagfile
+This flag is used to specify from the command line which tagfile should be
+used for the installation.
+.TP
+.B \--source_dir directory
+Used when installing multiple packages from disk sets. This is the directory
+in which the subdirectories for each disk are found. This isn't used when
+installing from floppy.
+.TP
+.B \--target_dir directory
+The directory where the target root directory is located. This is '/' when 
+installing on the hard drive, or typically '/mnt' when installing from an
+install disk.
+.TP
+.B \--source_device device
+The source device to install from. This is not used if you've provided the
+.B \--source_mounted
+flag. It's usually used when installing from floppy, as in:
+ \--source_device /dev/fd0u1440
+or
+ \--source_device /dev/fd1h1200.
+.SH AUTHOR
+Patrick J. Volkerding <volkerdi@slackware.com>
+.SH "SEE ALSO"
+.BR makepkg(8),
+.BR explodepkg(8),
+.BR installpkg(8),
+.BR removepkg(8),
+.BR upgradepkg(8)
diff --git a/source/a/pkgtools/manpages/removepkg.8 b/source/a/pkgtools/manpages/removepkg.8
new file mode 100644
index 00000000..3bd8bf7a
--- /dev/null
+++ b/source/a/pkgtools/manpages/removepkg.8
@@ -0,0 +1,108 @@
+.\" -*- nroff -*-
+.ds g \" empty
+.ds G \" empty
+.\" Like TP, but if specified indent is more than half
+.\" the current line-length - indent, use the default indent.
+.de Tp
+.ie \\n(.$=0:((0\\$1)*2u>(\\n(.lu-\\n(.iu)) .TP
+.el .TP "\\$1"
+..
+.TH REMOVEPKG 8 "23 Nov 2001" "Slackware Version 8.1.0"
+.SH NAME
+removepkg \- remove Slackware packages.
+.SH SYNOPSIS
+.B removepkg
+.BI packagename
+.LP
+[
+.B ROOT=/mnt
+]
+.B removepkg
+[
+.B \-copy
+]
+[
+.B \-keep
+]
+[
+.B \-preserve
+]
+[
+.B \-warn
+]
+.BI packagename
+.SH DESCRIPTION
+.B removepkg
+removes a previously installed Slackware package, while writing a progress
+report to the standard output.  A package may be specified either by the
+full package name (as you'd see listed in /var/log/packages/), or by the
+base package name.  For example, the package foo-1.0-i486-1.tgz may be removed
+with any of the following commands:
+
+removepkg foo-1.0-i486-1.tgz (also recognized: .tbz, .tlz, .txz)
+
+removepkg foo-1.0-i486-1
+
+removepkg foo.tgz
+
+removepkg foo
+
+When deleting files,
+.B removepkg
+will analyze the contents of the other packages installed on your system, and
+will only delete the files that are unique to the package being removed. 
+Similarly, the installation scripts for all the other packages will be 
+considered when deciding whether or not to delete symbolic links from the
+package.
+.LP
+Removing a package (as well as installing one) can be a dangerous undertaking.
+For this reason, there is the
+.B \-warn
+option available. When you use this,
+.B removepkg
+will not actually remove any files or links, but will output a detailed report
+of what it would do if you actually did remove the package. It's suggested that
+you do this (and maybe pipe the output to 
+.B less
+) before removing packages to make sure you've backed up anything that might
+be important.
+.LP
+When removing a package, it's original file index will be moved from 
+/var/log/packages to /var/log/removed_packages. Likewise, it's installation
+script will be moved from /var/log/scripts to /var/log/removed_scripts.
+.SH OPTIONS
+.TP
+.B \-warn packagename
+Generate a report to the standard output about which files and directories
+would be removed, but does not actually remove the package.
+.TP
+.B \-preserve packagename
+If specified, the complete package subtree is reconstructed in 
+/var/log/setup/tmp/preserved_packages/packagename.
+.TP
+.B \-copy packagename
+Construct a copy of the package under /var/log/setup/tmp/preserved_packages/packagename,
+but don't remove it.  (same effect as \-warn \-preserve)
+.TP
+.B \-keep
+Save the intermediate files created by removepkg (delete_list, 
+required_files, uniq_list, del_link_list, required_links, 
+required_list).  Mostly useful for debugging purposes.
+.SH " "
+It's possible to remove a package from a filesystem
+other than / by supplying
+.B removepkg
+with a
+.B ROOT
+environment variable:
+.TP
+.B ROOT=/mnt removepkg package
+
+.SH AUTHORS
+Patrick J. Volkerding <volkerdi@slackware.com>,
+with enhancements by Christian Franke <c.franke@acm.org>
+.SH "SEE ALSO"
+.BR installpkg(8),
+.BR makepkg(8),
+.BR pkgtool(8), 
+.BR upgradepkg(8)
diff --git a/source/a/pkgtools/manpages/setup.8-deprecated b/source/a/pkgtools/manpages/setup.8-deprecated
new file mode 100644
index 00000000..53397422
--- /dev/null
+++ b/source/a/pkgtools/manpages/setup.8-deprecated
@@ -0,0 +1,120 @@
+.\" -*- nroff -*-
+.ds g \" empty
+.ds G \" empty
+.\" Like TP, but if specified indent is more than half
+.\" the current line-length - indent, use the default indent.
+.de Tp
+.ie \\n(.$=0:((0\\$1)*2u>(\\n(.lu-\\n(.iu)) .TP
+.el .TP "\\$1"
+..
+.TH SETUP 8 "21 May 1994" "Slackware Version 2.0.0"
+.SH NAME
+setup \- Slackware system setup tool.
+.SH SYNOPSIS
+.B setup
+.LP
+.SH DESCRIPTION
+.B setup
+is the system installation and setup tool provided with the Slackware Linux
+distribution.
+.LP
+.B setup 
+is usually used to install software packages from your hard drive, a CD,
+NFS, or floppy disks. It is also a frontend for 
+.B pkgtool
+and many configuration scripts that come with various packages, such as the
+scripts which allow you to install LILO, configure your timezone, set your
+keyboard fonts, make bootdisks, and many other tasks.
+.SH OPTIONS
+.TP
+.B HELP
+Read the
+.B setup
+help file.
+.TP
+.B KEYMAP
+Change your keyboard map to one of many international and specialized keymaps
+available. 
+.B NOTE:
+This change will not become permanent unless you go through the 
+.B CONFIGURE option.
+.TP
+.B MAKE TAGS
+This allows you to write out custom tagfiles. A
+.B tagfile
+is a list of package names followed by one of these tags:
+.B ADD
+(required),
+.B SKP
+(skip),
+.B REC
+(recommended) or,
+.B OPT
+(optional). These allow you to completely automate your software installation.
+You can either put these files on the first disk of each disk series 
+(optionally using a custom 3 character extension), or in a custom location
+altogether, such as on a floppy disk in ./a1, ./ap1, ./d1, ..., directories.
+The format of a line in a 
+.B tagfile
+is like this:
+.LP
+package: 
+.B TAG
+.TP
+.B SOURCE
+Select your source media, such as hard disk, NFS, CD, or floppy. You should
+select installation from a directory if your CD or NFS directory has already
+been mounted, as it probably is if you're using 
+.B setup
+on your hard drive.
+.TP
+.B TARGET
+Select your target directory. For testing purposes, you may install the
+packages to a directory other than '/'. Don't expect them to run from there,
+though.
+.TP
+.B DISK SETS
+Select the disk sets you want to install. You can also install custom disk
+sets by tagging the
+.B CUS
+selection. The disk sets must be Slackware-like: they require the diskxxx?
+index on each disk, such as diskxyz1 for the first disk of the XYZ series.
+On the last disk there must be a file called
+.B install.end
+to signal the end of the disk series.
+.TP
+.B INSTALL
+Once you've gone through 
+.B SOURCE
+and
+.B DISK SETS
+( and possibly 
+.B TARGET
+), then you select this choice to go on with the software installation. You'll
+be asked what type of tagfiles you want to use and then 
+.B pkgtool
+will be called to install the software.
+.TP
+.B CONFIGURE
+This option runs through several scripts that configure various aspects of your
+Linux system. These might include LILO installation, timezone configuration,
+and other things.
+.TP
+.B PKGTOOL
+This option calls the 
+.B pkgtool(8)
+utility for you.
+.TP
+.B EXIT
+Exit the
+.B setup
+program.
+.SH AUTHOR
+Patrick J. Volkerding <volkerdi@slackware.com>
+.SH "SEE ALSO"
+.BR makepkg(8),
+.BR installpkg(8),
+.BR explodepkg(8),
+.BR removepkg(8),
+.BR pkgtool(8),
+.BR upgradepkg(8)
diff --git a/source/a/pkgtools/manpages/upgradepkg.8 b/source/a/pkgtools/manpages/upgradepkg.8
new file mode 100644
index 00000000..8ca7811b
--- /dev/null
+++ b/source/a/pkgtools/manpages/upgradepkg.8
@@ -0,0 +1,98 @@
+.\" -*- nroff -*-
+.ds g \" empty
+.ds G \" empty
+.\" Like TP, but if specified indent is more than half
+.\" the current line-length - indent, use the default indent.
+.de Tp
+.ie \\n(.$=0:((0\\$1)*2u>(\\n(.lu-\\n(.iu)) .TP
+.el .TP "\\$1"
+..
+.TH UPGRADEPKG 8 "31 May 2002" "Slackware Version 8.1.0"
+.SH NAME
+upgradepkg \- upgrade Slackware packages.
+.SH SYNOPSIS
+.B upgradepkg
+[
+.B --dry-run
+]
+[
+.B --install-new
+]
+[
+.B --reinstall
+]
+[
+.B --verbose
+]
+.BI newpackagename
+.BI [ newpackagename2 ]
+.LP
+.B upgradepkg
+[
+.B --dry-run
+]
+[
+.B --install-new
+]
+[
+.B --reinstall
+]
+[
+.B --verbose
+]
+.BI oldpackagename%newpackagename
+.BI [ old2%new2 ]
+.SH DESCRIPTION
+.B upgradepkg
+upgrades a Slackware package from an older version to a
+newer one.  It does this by
+.B INSTALLING
+the new package onto the system, and then
+.B REMOVING 
+any files from the old package that aren't in the new package.
+If the old and new packages have the same name, a single argument is all that
+is required.  If the packages have different names, supply the name of the
+old package followed by a percent symbol (%), then the name of the new package.
+Do not add any extra whitespace between pairs of old/new package names.
+
+If upgradepkg finds more than one installed package matching the old package's
+name, it will remove them all.
+.TP
+To upgrade in a directory other than / (such as /mnt):
+.TP
+ROOT=/mnt upgradepkg package.tgz (or .tbz, .tlz, .txz)
+.SH OPTIONS
+.TP
+.B \--dry-run
+Output a report about which packages would be installed or upgraded
+but don't actually perform the upgrades.
+.TP
+.B \--install-new
+Normally upgradepkg only upgrades packages that are already installed on the system, and
+will skip any packages that do not already have a version installed.
+If
+.B --install-new
+is specified, the behavior is modified to install new packages in addition to upgrading
+existing ones.
+.TP
+.B \--reinstall
+Upgradepkg usually skips packages if the exact same package
+(matching name, version, arch, and build number) is already installed on the system.
+Use the --reinstall option if you want to upgrade all packages even if the same
+version is already installed.
+.TP
+.B \--verbose
+Show all the gory details of the upgrade.
+.SH BUGS
+Before upgrading a package, save any configuration files (such as in /etc)
+that you wish to keep.  Sometimes these will be preserved, but it depends on
+the package structure.  If you want to force new versions of the config files
+to be installed, remove the old ones manually prior to running upgradepkg.
+.SH AUTHOR
+Patrick J. Volkerding <volkerdi@slackware.com>
+.SH "SEE ALSO"
+.BR makepkg(8),
+.BR installpkg(8),
+.BR removepkg(8),
+.BR explodepkg(8),
+.BR pkgtool(8)