Mon May 28 19:12:29 UTC 201820180528191229

a/pkgtools-15.0-noarch-13.txz:  Rebuilt.
  installpkg: default line length for --terselength is the number of columns.
  removepkg: added --terse mode.
  upgradepkg: default line length for --terselength is the number of columns.
  upgradepkg: accept -option in addition to --option.
ap/vim-8.1.0026-x86_64-1.txz:  Upgraded.
d/bison-3.0.5-x86_64-1.txz:  Upgraded.
e/emacs-26.1-x86_64-1.txz:  Upgraded.
kde/kopete-4.14.3-x86_64-8.txz:  Rebuilt.
  Recompiled against libidn-1.35.
n/conntrack-tools-1.4.5-x86_64-1.txz:  Upgraded.
n/libnetfilter_conntrack-1.0.7-x86_64-1.txz:  Upgraded.
n/libnftnl-1.1.0-x86_64-1.txz:  Upgraded.
n/links-2.16-x86_64-2.txz:  Rebuilt.
  Rebuilt to enable X driver for -g mode.
n/lynx-2.8.9dev.19-x86_64-1.txz:  Upgraded.
n/nftables-0.8.5-x86_64-1.txz:  Upgraded.
n/p11-kit-0.23.11-x86_64-1.txz:  Upgraded.
n/ulogd-2.0.7-x86_64-1.txz:  Upgraded.
n/whois-5.3.1-x86_64-1.txz:  Upgraded.
xap/network-manager-applet-1.8.12-x86_64-1.txz:  Upgraded.
xap/vim-gvim-8.1.0026-x86_64-1.txz:  Upgraded.

1 files changed, 14 insertions, 14 deletions

diff --git a/source/a/pkgtools/scripts/setup.80.make-bootdisk b/source/a/pkgtools/scripts/setup.80.make-bootdisk
index 1f0202a5..c1753bc5 100644
--- a/source/a/pkgtools/scripts/setup.80.make-bootdisk
+++ b/source/a/pkgtools/scripts/setup.80.make-bootdisk
@@ -27,7 +27,7 @@ elif [ -r /usr/share/syslinux/mbr.bin ]; then
   MBR_BIN=/usr/share/syslinux/mbr.bin
 else
   dialog --title "ERROR: USB BOOT STICK NOT CREATED" --msgbox \
-  "Master Boot Record file mbr.bin not found.  This script requires that the syslinux package is installed." 6 60
+  "Master Boot Record file mbr.bin not found. This script requires that the syslinux package is installed." 6 60
   exit
 fi
 
@@ -47,12 +47,12 @@ while [ 0 ]; do # the bootdisk menu loop
  fi
  dialog --title "MAKE USB FLASH BOOT" --default-item "$DEFAULTITEM" --menu \
 "If your computer supports booting from a USB device, it is recommended that you make \
-a USB boot stick for your system at this time.  It will boot your computer straight \
+a USB boot stick for your system at this time. It will boot your computer straight \
 into the root filesystem on $ROOT_DEVICE. \n\
 \n\
-Please insert a USB flash memory stick and then press ENTER to create a boot stick.  \n\
+Please insert a USB flash memory stick and then press ENTER to create a boot stick. \n\
 \n\
-WARNING!  The existing contents of the USB stick will be erased. \n\
+WARNING! The existing contents of the USB stick will be erased. \n\
    " 18 70 2 \
  "Create" "Make a USB Linux boot stick" \
  "Skip" "Skip making a USB boot stick" \
@@ -98,7 +98,7 @@ otherwise select 'No'." 12 70
 
   dialog --title "CREATING USB BOOT STICK" --infobox "Creating SYSLINUX bootdisk for \
 $ROOT_DEVICE on /dev/$STICK." 3 64 
-  # Create a 16M partition with FAT16.  This should be large enough for any kernel (for now).
+  # Create a 16M partition with FAT16. This should be large enough for any kernel (for now).
   PARTSIZE="+16384K"
   # Zero out master boot record and then initialize it with one bootable dos partition  
   dd if=/dev/zero of=/dev/$STICK bs=512 count=1  1> $RDIR 2> $RDIR
@@ -152,15 +152,15 @@ EOF
 Welcome to the 09Slackware07 Linux custom USB boot stick!
 
 By default, this stick boots a root Linux partition on $ROOT_DEVICE when you
-hit ENTER.  If you'd like to boot some other partition, use a command like
+hit ENTER. If you'd like to boot some other partition, use a command like
 this on the prompt below:
 
     mount root=/dev/sda1 ro
 
 Where "/dev/sda1" is the partition you want to boot, and "ro" specifies that
-the partition should be initially mounted as read-only.  If you wish to mount
-the partition read-write, use "rw" instead.  To set the video console mode,
-use the vga= parameter (press F1 to see a table).  You may also add any other
+the partition should be initially mounted as read-only. If you wish to mount
+the partition read-write, use "rw" instead. To set the video console mode,
+use the vga= parameter (press F1 to see a table). You may also add any other
 kernel parameters you might need depending on your hardware, and which
 drivers are included in your kernel.
 
@@ -187,7 +187,7 @@ EOF
 
  FRAMEBUFFER MODES:
  To get the kernel to start in VESA framebuffer mode, you need to pass it
- a vga= init string on the "boot:" prompt.  Here's a table:
+ a vga= init string on the "boot:" prompt. Here's a table:
 
    Colors   640x480 800x600 1024x768 1280x1024 1600x1200
   --------+---------------------------------------------
@@ -210,14 +210,14 @@ EOF
 Welcome to the Slackware Linux custom USB boot stick!
 
 By default, this stick boots a root Linux partition on $ROOT_DEVICE when you
-hit ENTER.  If you'd like to boot some other partition, use a command like
+hit ENTER. If you'd like to boot some other partition, use a command like
 this on the prompt below:
 
     huge.s root=/dev/sda1 ro
 
 Where "/dev/sda1" is the partition you want to boot, and "ro" specifies that
-the partition should be initially mounted as read-only.  If you wish to mount
-the partition read-write, use "rw" instead.  You may also add any other
+the partition should be initially mounted as read-only. If you wish to mount
+the partition read-write, use "rw" instead. You may also add any other
 kernel parameters you might need depending on your hardware, and which
 drivers are included in your kernel.
 
@@ -248,7 +248,7 @@ EOF
     exit
   fi
   dialog --title "USB BOOT STICK CREATED" --ok-label Continue --cancel-label Create --menu \
-"The USB boot stick has been successfully created on device /dev/$STICK.  If you would like to \
+"The USB boot stick has been successfully created on device /dev/$STICK. If you would like to \
 create an additional boot stick, please select 'Create' and we'll go back and make another \
 one, otherwise select 'Continue' to continue configuring your system." 12 71 2 \
  "Continue" "Continue the configuration (done making boot sticks)" \