Mon May 28 19:12:29 UTC 201820180528191229

a/pkgtools-15.0-noarch-13.txz:  Rebuilt.
  installpkg: default line length for --terselength is the number of columns.
  removepkg: added --terse mode.
  upgradepkg: default line length for --terselength is the number of columns.
  upgradepkg: accept -option in addition to --option.
ap/vim-8.1.0026-x86_64-1.txz:  Upgraded.
d/bison-3.0.5-x86_64-1.txz:  Upgraded.
e/emacs-26.1-x86_64-1.txz:  Upgraded.
kde/kopete-4.14.3-x86_64-8.txz:  Rebuilt.
  Recompiled against libidn-1.35.
n/conntrack-tools-1.4.5-x86_64-1.txz:  Upgraded.
n/libnetfilter_conntrack-1.0.7-x86_64-1.txz:  Upgraded.
n/libnftnl-1.1.0-x86_64-1.txz:  Upgraded.
n/links-2.16-x86_64-2.txz:  Rebuilt.
  Rebuilt to enable X driver for -g mode.
n/lynx-2.8.9dev.19-x86_64-1.txz:  Upgraded.
n/nftables-0.8.5-x86_64-1.txz:  Upgraded.
n/p11-kit-0.23.11-x86_64-1.txz:  Upgraded.
n/ulogd-2.0.7-x86_64-1.txz:  Upgraded.
n/whois-5.3.1-x86_64-1.txz:  Upgraded.
xap/network-manager-applet-1.8.12-x86_64-1.txz:  Upgraded.
xap/vim-gvim-8.1.0026-x86_64-1.txz:  Upgraded.

4 files changed, 82 insertions, 12 deletions

diff --git a/source/a/smartmontools/doinst.sh b/source/a/smartmontools/doinst.sh
index 82f0ac13..b96297f9 100644
--- a/source/a/smartmontools/doinst.sh
+++ b/source/a/smartmontools/doinst.sh
@@ -10,4 +10,16 @@ config() {
   fi
   # Otherwise, we leave the .new copy for the admin to consider...
 }
+preserve_perms() {
+  NEW="$1"
+  OLD="$(dirname ${NEW})/$(basename ${NEW} .new)"
+  if [ -e ${OLD} ]; then
+    cp -a ${OLD} ${NEW}.incoming
+    cat ${NEW} > ${NEW}.incoming
+    mv ${NEW}.incoming ${NEW}
+  fi
+  config ${NEW}
+}
+
+preserve_perms etc/rc.d/rc.smartd.new
 config etc/smartd.conf.new
diff --git a/source/a/smartmontools/rc.smartd b/source/a/smartmontools/rc.smartd
new file mode 100644
index 00000000..f0ad4f8c
--- /dev/null
+++ b/source/a/smartmontools/rc.smartd
@@ -0,0 +1,44 @@
+#!/bin/sh
+#
+# /etc/rc.d/rc.smartd 
+#
+# Start/stop/restart the smartd daemon, which monitors the status of
+# S.M.A.R.T. compatible hard drives and reports any problems.
+#
+# By default, smartd will scan for all ATA/SATA and SCSI/SAS hard drives
+# and solid-state drives. Settings may be customized in /etc/smartd.conf.
+ 
+smart_start() {
+  if [ -x /usr/sbin/smartd -a -r /etc/smartd.conf ]; then
+    echo "Starting smartd:  /usr/sbin/smartd -p /run/smartd.pid &"
+    /usr/sbin/smartd -p /run/smartd.pid &
+  fi
+}
+
+smart_stop() {
+  if [ -r /run/smartd.pid ]; then
+    kill $(cat /run/smartd.pid)
+  else
+    killall smartd
+  fi
+}
+
+smart_restart() {
+  smart_stop
+  sleep 1
+  smart_start
+}
+
+case "$1" in
+'start')
+  smart_start
+  ;;
+'stop')
+  smart_stop
+  ;;
+'restart')
+  smart_restart
+  ;;
+*)
+  echo "Usage: $0 {start|stop|restart}"
+esac
diff --git a/source/a/smartmontools/slack-desc b/source/a/smartmontools/slack-desc
index 842caec4..ede7335c 100644
--- a/source/a/smartmontools/slack-desc
+++ b/source/a/smartmontools/slack-desc
@@ -1,8 +1,8 @@
 # HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
+# The "handy ruler" below makes it easier to edit a package description. Line
 # up the first '|' above the ':' following the base package name, and the '|' on
-# the right side marks the last column you can put a character in.  You must make
-# exactly 11 lines for the formatting to be correct.  It's also customary to
+# the right side marks the last column you can put a character in. You must make
+# exactly 11 lines for the formatting to be correct. It's also customary to
 # leave one space after the ':'.
 
              |-----handy-ruler------------------------------------------------------|
@@ -14,6 +14,6 @@ smartmontools: (S.M.A.R.T.) system build into ATA and SCSI Hard Drives. This is
 smartmontools: to check the reliability of the hard drive and to predict drive
 smartmontools: failures.
 smartmontools:
-smartmontools:
+smartmontools: Homepage: https://www.smartmontools.org/
 smartmontools:
 smartmontools:
diff --git a/source/a/smartmontools/smartmontools.SlackBuild b/source/a/smartmontools/smartmontools.SlackBuild
index f962f2bb..72593d71 100755
--- a/source/a/smartmontools/smartmontools.SlackBuild
+++ b/source/a/smartmontools/smartmontools.SlackBuild
@@ -1,6 +1,6 @@
-#!/bin/sh
+#!/bin/bash
 
-# Copyright 2008, 2009, 2011  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# Copyright 2008, 2009, 2011, 2017, 2018  Patrick J. Volkerding, Sebeka, Minnesota, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -20,9 +20,11 @@
 #  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
 #  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
+cd $(dirname $0) ; CWD=$(pwd)
 
+PKGNAM=smartmontools
 VERSION=${VERSION:-$(echo smartmontools-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-1}
+BUILD=${BUILD:-3}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
@@ -34,13 +36,20 @@ if [ -z "$ARCH" ]; then
   esac
 fi
 
+# If the variable PRINT_PACKAGE_NAME is set, then this script will report what
+# the name of the created package would be, and then exit. This information
+# could be useful to other scripts.
+if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
+  echo "$PKGNAM-$VERSION-$ARCH-$BUILD.txz"
+  exit 0
+fi
+
 if [ "$ARCH" = "x86_64" ]; then
   LIBDIRSUFFIX="64"
 else
   LIBDIRSUFFIX=""
 fi
 
-CWD=$(pwd)
 TMP=${TMP:-/tmp}
 PKG=/tmp/package-smartmontools
 
@@ -50,7 +59,7 @@ mkdir -p $TMP $PKG
 cd $TMP
 rm -rf smartmontools-$VERSION
 tar xvf $CWD/smartmontools-$VERSION.tar.?z* || exit 1
-cd smartmontools-$VERSION
+cd smartmontools-$VERSION || exit 1
 chown -R root:root .
 
 ./configure \
@@ -59,13 +68,18 @@ chown -R root:root .
   --mandir=/usr/man \
   --sysconfdir=/etc \
   --docdir=/usr/doc/smartmontools-$VERSION \
-  --build=$ARCH-slackware-linux
+  --build=$ARCH-slackware-linux || exit 1
 
 make || exit 1
 make install DESTDIR=$PKG || exit 1
 
-# Not used on Slackware:
-rm -rf $PKG/etc/rc.d
+# Don't use the included init script:
+rm -rf $PKG/etc/rc.d/*
+
+# Install the Slackware smartd init script:
+cp -a $CWD/rc.smartd $PKG/etc/rc.d/rc.smartd.new
+chown root:root $PKG/etc/rc.d/rc.smartd.new
+chmod 644 $PKG/etc/rc.d/rc.smartd.new
 
 mv $PKG/etc/smartd.conf $PKG/etc/smartd.conf.new
 gzip -9 $PKG/usr/man/man?/*.?