Slackware 13.0slackware-13.0

Wed Aug 26 10:00:38 CDT 2009
Slackware 13.0 x86_64 is released as stable!  Thanks to everyone who
helped make this release possible -- see the RELEASE_NOTES for the
credits.  The ISOs are off to the replicator.  This time it will be a
6 CD-ROM 32-bit set and a dual-sided 32-bit/64-bit x86/x86_64 DVD.
We're taking pre-orders now at store.slackware.com.  Please consider
picking up a copy to help support the project.  Once again, thanks to
the entire Slackware community for all the help testing and fixing
things and offering suggestions during this development cycle.
As always, have fun and enjoy!  -P.

10 files changed, 1857 insertions, 0 deletions

diff --git a/source/a/sysvinit-scripts/scripts/fetch-rescan-scsi-bus.sh b/source/a/sysvinit-scripts/scripts/fetch-rescan-scsi-bus.sh
new file mode 100644
index 00000000..29dccf78
--- /dev/null
+++ b/source/a/sysvinit-scripts/scripts/fetch-rescan-scsi-bus.sh
@@ -0,0 +1 @@
+lftpget http://www.garloff.de/kurt/linux/rescan-scsi-bus.sh
diff --git a/source/a/sysvinit-scripts/scripts/inittab b/source/a/sysvinit-scripts/scripts/inittab
new file mode 100644
index 00000000..862f704c
--- /dev/null
+++ b/source/a/sysvinit-scripts/scripts/inittab
@@ -0,0 +1,74 @@
+#
+# inittab	This file describes how the INIT process should set up
+#		the system in a certain run-level.
+#
+# Version:	@(#)inittab		2.04	17/05/93	MvS
+#                                       2.10    02/10/95        PV
+#                                       3.00    02/06/1999      PV
+#                                       4.00    04/10/2002      PV
+#
+# Author:	Miquel van Smoorenburg, <miquels@drinkel.nl.mugnet.org>
+# Modified by:	Patrick J. Volkerding, <volkerdi@slackware.com>
+#
+
+# These are the default runlevels in Slackware:
+#   0 = halt
+#   1 = single user mode
+#   2 = unused (but configured the same as runlevel 3)
+#   3 = multiuser mode (default Slackware runlevel)
+#   4 = X11 with KDM/GDM/XDM (session managers)
+#   5 = unused (but configured the same as runlevel 3)
+#   6 = reboot
+
+# Default runlevel. (Do not set to 0 or 6)
+id:3:initdefault:
+
+# System initialization (runs when system boots).
+si:S:sysinit:/etc/rc.d/rc.S
+
+# Script to run when going single user (runlevel 1).
+su:1S:wait:/etc/rc.d/rc.K
+
+# Script to run when going multi user.
+rc:2345:wait:/etc/rc.d/rc.M
+
+# What to do at the "Three Finger Salute".
+ca::ctrlaltdel:/sbin/shutdown -t5 -r now
+
+# Runlevel 0 halts the system.
+l0:0:wait:/etc/rc.d/rc.0
+
+# Runlevel 6 reboots the system.
+l6:6:wait:/etc/rc.d/rc.6
+
+# What to do when power fails.
+pf::powerfail:/sbin/genpowerfail start
+
+# If power is back, cancel the running shutdown.
+pg::powerokwait:/sbin/genpowerfail stop
+
+# These are the standard console login getties in multiuser mode:
+c1:1235:respawn:/sbin/agetty 38400 tty1 linux
+c2:1235:respawn:/sbin/agetty 38400 tty2 linux
+c3:1235:respawn:/sbin/agetty 38400 tty3 linux
+c4:1235:respawn:/sbin/agetty 38400 tty4 linux
+c5:1235:respawn:/sbin/agetty 38400 tty5 linux
+c6:12345:respawn:/sbin/agetty 38400 tty6 linux
+
+# Local serial lines:
+#s1:12345:respawn:/sbin/agetty -L ttyS0 9600 vt100
+#s2:12345:respawn:/sbin/agetty -L ttyS1 9600 vt100
+
+# Dialup lines:
+#d1:12345:respawn:/sbin/agetty -mt60 38400,19200,9600,2400,1200 ttyS0 vt100
+#d2:12345:respawn:/sbin/agetty -mt60 38400,19200,9600,2400,1200 ttyS1 vt100
+
+# Runlevel 4 used to be for an X window only system, until we discovered
+# that it throws init into a loop that keeps your load avg at least 1 all 
+# the time. Thus, there is now one getty opened on tty6. Hopefully no one
+# will notice. ;^)
+# It might not be bad to have one text console anyway, in case something 
+# happens to X.
+x1:4:respawn:/etc/rc.d/rc.4
+
+# End of /etc/inittab
diff --git a/source/a/sysvinit-scripts/scripts/rc.4 b/source/a/sysvinit-scripts/scripts/rc.4
new file mode 100644
index 00000000..be8a9c74
--- /dev/null
+++ b/source/a/sysvinit-scripts/scripts/rc.4
@@ -0,0 +1,48 @@
+#! /bin/sh
+#
+# rc.4		This file is executed by init(8) when the system is being
+#		initialized for run level 4 (XDM)
+#
+# Version:	@(#)/etc/rc.d/rc.4	2.00	02/17/93
+#
+# Author:	Fred N. van Kempen, <waltje@uwalt.nl.mugnet.org>
+# At least 47% rewritten by:  Patrick J. Volkerding <volkerdi@slackware.com>
+#
+
+# Tell the viewers what's going to happen...
+echo "Starting up X11 session manager..."
+
+# Try to use GNOME's gdm session manager.  This comes first because if
+# gdm is on the machine then the user probably installed it and wants
+# to use it by default:
+if [ -x /usr/bin/gdm ]; then
+  exec /usr/bin/gdm -nodaemon
+fi
+
+# Someone thought that gdm looked prettier in /usr/sbin,
+# so look there, too:
+if [ -x /usr/sbin/gdm ]; then
+  exec /usr/sbin/gdm -nodaemon
+fi
+
+# Not there?  OK, try to use KDE's kdm session manager:
+if [ -x /opt/kde/bin/kdm ]; then
+  exec /opt/kde/bin/kdm -nodaemon
+elif [ -x /usr/bin/kdm ]; then
+  exec /usr/bin/kdm -nodaemon
+fi
+
+# If all you have is XDM, I guess it will have to do:
+if [ -x /usr/bin/xdm ]; then
+  exec /usr/bin/xdm -nodaemon
+elif [ -x /usr/X11R6/bin/xdm ]; then
+  exec /usr/X11R6/bin/xdm -nodaemon
+fi
+
+# error
+echo
+echo "Hey, you don't have KDM, GDM, or XDM.  Can't use runlevel 4 without"
+echo "one of those installed."
+sleep 30
+
+# All done.
diff --git a/source/a/sysvinit-scripts/scripts/rc.6 b/source/a/sysvinit-scripts/scripts/rc.6
new file mode 100644
index 00000000..2d5028e3
--- /dev/null
+++ b/source/a/sysvinit-scripts/scripts/rc.6
@@ -0,0 +1,266 @@
+#! /bin/sh
+#
+# rc.6		This file is executed by init when it goes into runlevel
+#		0 (halt) or runlevel 6 (reboot). It kills all processes,
+#		unmounts file systems and then either halts or reboots.
+#
+# Version:	@(#)/etc/rc.d/rc.6	2.47 Sat Jan 13 13:37:26 PST 2001
+#
+# Author:	Miquel van Smoorenburg <miquels@drinkel.nl.mugnet.org>
+# Modified by:  Patrick J. Volkerding, <volkerdi@slackware.com>
+#
+
+# Set the path.
+PATH=/sbin:/etc:/bin:/usr/bin
+
+# If there are SystemV init scripts for this runlevel, run them.
+if [ -x /etc/rc.d/rc.sysvinit ]; then
+  . /etc/rc.d/rc.sysvinit
+fi
+
+# Set linefeed mode to avoid staircase effect.
+/bin/stty onlcr
+
+echo "Running shutdown script $0:"
+
+# Find out how we were called.
+case "$0" in
+	*0)
+		command="halt"
+		;;
+	*6)
+		command=reboot
+		;;
+	*)
+		echo "$0: call me as \"rc.0\" or \"rc.6\" please!"
+		exit 1
+		;;
+esac
+
+# Save the system time to the hardware clock using hwclock --systohc.
+if [ -x /sbin/hwclock ]; then
+  # Check for a broken motherboard RTC clock (where ioports for rtc are
+  # unknown) to prevent hwclock causing a hang:
+  if ! grep -q -w rtc /proc/ioports ; then
+    CLOCK_OPT="--directisa"
+  fi
+  if grep -q "^UTC" /etc/hardwareclock 2> /dev/null ; then
+    echo "Saving system time to the hardware clock (UTC)."
+    /sbin/hwclock $CLOCK_OPT --utc --systohc
+  else
+    echo "Saving system time to the hardware clock (localtime)."
+    /sbin/hwclock  $CLOCK_OPT --localtime --systohc
+  fi
+fi
+
+# Run any local shutdown scripts:
+if [ -x /etc/rc.d/rc.local_shutdown ]; then
+  /etc/rc.d/rc.local_shutdown stop
+fi
+
+# Stop the Apache web server:
+if [ -x /etc/rc.d/rc.httpd ]; then
+  /etc/rc.d/rc.httpd stop
+fi
+
+# Stop the MySQL database:
+if [ -r /var/run/mysql/mysql.pid ]; then
+  . /etc/rc.d/rc.mysqld stop
+fi
+
+# Stop the Samba server:
+if [ -x /etc/rc.d/rc.samba ]; then
+  . /etc/rc.d/rc.samba stop
+fi
+
+# Shut down the NFS server:
+if [ -x /etc/rc.d/rc.nfsd ]; then
+  /etc/rc.d/rc.nfsd stop
+fi
+
+# Shut down the SSH server:
+if [ -x /etc/rc.d/rc.sshd ]; then
+  /etc/rc.d/rc.sshd stop
+fi
+
+# Shut down the SASL authentication daemon:
+if [ -x /etc/rc.d/rc.saslauthd ]; then
+  /etc/rc.d/rc.saslauthd stop
+fi
+
+# Shut down OpenLDAP:
+if [ -x /etc/rc.d/rc.openldap ]; then
+  /etc/rc.d/rc.openldap stop
+fi
+
+# Stop D-Bus:
+if [ -x /etc/rc.d/rc.messagebus ]; then
+  sh /etc/rc.d/rc.messagebus stop
+fi
+
+# Unmount any NFS, SMB, or CIFS filesystems:
+echo "Unmounting remote filesystems."
+/bin/umount -v -a -r -t nfs,smbfs,cifs
+
+# Try to shut down pppd:
+PS="$(ps ax)"
+if echo "$PS" | /bin/grep -q -w pppd ; then
+  if [ -x /usr/sbin/ppp-off ]; then
+    /usr/sbin/ppp-off
+  fi
+fi
+
+# Bring down the networking system, but first make sure that this
+# isn't a diskless client with the / partition mounted via NFS:
+if ! /bin/mount | /bin/grep -q 'on / type nfs' ; then
+  if [ -x /etc/rc.d/rc.inet1 ]; then
+    . /etc/rc.d/rc.inet1 stop
+  fi
+fi
+
+# In case dhcpcd might have been manually started on the command line,
+# look for the .pid file, and shut dhcpcd down if it's found:
+if /bin/ls /etc/dhcpc/*.pid 1> /dev/null 2> /dev/null ; then
+  /sbin/dhcpcd -k 1> /dev/null 2> /dev/null
+  # A little time for /etc/resolv.conf and/or other files to
+  # restore themselves.
+  sleep 2
+fi
+
+# Shut down PCMCIA devices:
+if [ -x /etc/rc.d/rc.pcmcia ]; then
+  . /etc/rc.d/rc.pcmcia stop
+  # The cards might need a little extra time here to deactivate:
+  /bin/sleep 5
+fi
+
+# Turn off process accounting:
+if [ -x /sbin/accton -a -r /var/log/pacct ]; then
+  /sbin/accton off
+fi
+
+# Terminate acpid before syslog:
+if [ -x /etc/rc.d/rc.acpid -a -r /var/run/acpid.pid ]; then # quit
+  . /etc/rc.d/rc.acpid stop
+fi
+
+# Kill all processes.
+# INIT is supposed to handle this entirely now, but this didn't always
+# work correctly without this second pass at killing off the processes.
+# Since INIT already notified the user that processes were being killed,
+# we'll avoid echoing this info this time around.
+if [ ! "$1" = "fast" ]; then # shutdown did not already kill all processes
+  /sbin/killall5 -15 
+  /bin/sleep 5
+  /sbin/killall5 -9
+fi
+
+# Try to turn off quota.
+if /bin/grep -q quota /etc/fstab ; then
+  if [ -x /sbin/quotaoff ]; then
+    echo "Turning off filesystem quotas."
+    /sbin/quotaoff -a
+  fi
+fi
+
+# Carry a random seed between reboots.
+echo "Saving random seed from /dev/urandom in /etc/random-seed."
+# Use the pool size from /proc, or 512 bytes:
+if [ -r /proc/sys/kernel/random/poolsize ]; then
+  /bin/dd if=/dev/urandom of=/etc/random-seed count=1 bs=$(cat /proc/sys/kernel/random/poolsize) 2> /dev/null
+else
+  /bin/dd if=/dev/urandom of=/etc/random-seed count=1 bs=512 2> /dev/null
+fi
+/bin/chmod 600 /etc/random-seed
+
+# Before unmounting file systems write a reboot or halt record to wtmp.
+$command -w
+
+# Clear /var/lock/subsys.
+if [ -d /var/lock/subsys ]; then
+  rm -f /var/lock/subsys/*
+fi
+
+# Turn off swap:
+echo "Turning off swap."
+/sbin/swapoff -a
+/bin/sync
+
+# Umount any LVM volumes:
+if /bin/mount | /bin/grep -q '^/dev/mapper/' ; then
+  echo "Unmounting LVM volumes."
+  /bin/umount -v $(/bin/mount | /bin/grep '^/dev/mapper/' | /bin/cut -d ' ' -f 3 | /bin/tac)
+fi
+
+echo "Unmounting local file systems."
+/bin/umount -v -a -t no,proc,sysfs
+
+echo "Remounting root filesystem read-only."
+/bin/mount -v -n -o remount,ro /
+
+# This never hurts:
+/bin/sync
+
+# Close any volumes opened by cryptsetup:
+if [ -f /etc/crypttab -a -x /sbin/cryptsetup.static ]; then
+  cat /etc/crypttab | grep -v "^#" | grep -v "^$" | while read line; do
+    # NOTE: we only support LUKS formatted volumes (except for swap)!
+    LUKS=$(echo $line | tr '\t' ' ' | tr -s ' ' | cut -f1 -d' ')
+    DEV=$(echo $line | tr '\t' ' ' | tr -s ' ' | cut -f2 -d' ')
+    OPTS=$(echo $line | tr '\t' ' ' | tr -s ' ' | cut -f4 -d' ')
+    if /sbin/cryptsetup.static isLuks $DEV 2>/dev/null ; then
+      echo "Locking LUKS crypt volume '${LUKS}':"
+      /sbin/cryptsetup.static luksClose ${LUKS}
+    elif echo $OPTS | grep -wq swap ; then
+      # If any of the volumes was used as encrypted swap,
+      # then run mkswap on the underlying device -
+      # in case other Linux installations on this computer should use it:
+      echo "Erasing encrypted swap '${LUKS}' and restoring normal swap on ${DEV}:"
+      /sbin/cryptsetup.static remove ${LUKS}
+      mkswap $DEV
+    fi
+  done
+fi
+
+# Deactivate LVM volume groups:
+if [ -r /etc/lvmtab -o -d /etc/lvm/backup ]; then
+  echo "Deactivating LVM volume groups:"
+  /sbin/vgchange -an --ignorelockingfailure
+fi
+
+# This never hurts again (especially since root-on-LVM always fails
+# to deactivate the / logical volume...  but at least it was
+# remounted as read-only first)
+/bin/sync
+
+# sleep 3 fixes problems with some hard drives that don't
+# otherwise finish syncing before reboot or poweroff
+/bin/sleep 3
+
+# This is to ensure all processes have completed on SMP machines:
+wait
+
+if [ -x /sbin/genpowerd ]; then
+  # See if this is a powerfail situation:
+  if /bin/egrep -q "FAIL|SCRAM" /etc/upsstatus 2> /dev/null ; then
+    # Signal UPS to shut off the inverter:
+    /sbin/genpowerd -k
+    if [ ! $? = 0 ]; then
+      echo
+      echo "There was an error signaling the UPS."
+      echo "Perhaps you need to edit /etc/genpowerd.conf to configure"
+      echo "the serial line and UPS type."
+      # Wasting 15 seconds of precious power:
+      /bin/sleep 15
+    fi
+  fi
+fi
+
+# Now halt (poweroff with APM or ACPI enabled kernels) or reboot.
+if [ "$command" = "reboot" ]; then
+  echo "Rebooting."
+  /sbin/reboot
+else
+  /sbin/poweroff
+fi
+
diff --git a/source/a/sysvinit-scripts/scripts/rc.K b/source/a/sysvinit-scripts/scripts/rc.K
new file mode 100644
index 00000000..68609753
--- /dev/null
+++ b/source/a/sysvinit-scripts/scripts/rc.K
@@ -0,0 +1,106 @@
+#! /bin/sh
+#
+# rc.K 		This file is executed by init when it goes into runlevel
+#		1, which is the administrative state. It kills all
+#		daemons and then puts the system into single user mode.
+#		Note that the file systems are kept mounted.
+#
+# Version:	@(#)/etc/rc.d/rc.K	3.1415 Sat Jan 13 13:37:26 PST 2001
+#
+# Author:	Miquel van Smoorenburg <miquels@drinkel.nl.mugnet.org>
+# Modified by:  Patrick J. Volkerding <volkerdi@slackware.com>
+#
+
+# Set the path.
+PATH=/sbin:/bin:/usr/bin:/usr/sbin
+
+# Load any needed keyboard mappings:
+if [ -x /etc/rc.d/rc.keymap ]; then
+  . /etc/rc.d/rc.keymap
+fi
+
+# If there are SystemV init scripts for this runlevel, run them.
+if [ -x /etc/rc.d/rc.sysvinit ]; then
+  . /etc/rc.d/rc.sysvinit
+fi
+
+# Try to turn off quota:
+if grep -q quota /etc/fstab ; then
+  if [ -x /sbin/quotaoff ]; then
+    echo "Turning off filesystem quotas."
+    /sbin/quotaoff -a
+  fi
+fi
+
+# Try to turn off accounting:
+if [ -x /sbin/accton -a -r /var/log/pacct ]; then
+  /sbin/accton off
+fi
+
+# Run any local shutdown scripts:
+if [ -x /etc/rc.d/rc.local_shutdown ]; then
+  /etc/rc.d/rc.local_shutdown stop
+fi
+
+# Stop the Apache web server:
+if [ -x /etc/rc.d/rc.httpd ]; then
+  /etc/rc.d/rc.httpd stop
+fi
+
+# Stop the Samba server:
+if [ -x /etc/rc.d/rc.samba ]; then
+  . /etc/rc.d/rc.samba stop
+fi
+
+# Shut down the NFS server:
+if [ -x /etc/rc.d/rc.nfsd ]; then
+  /etc/rc.d/rc.nfsd stop
+fi
+
+# Unmount any NFS, SMB, or CIFS filesystems:
+echo "Unmounting remote filesystems."
+umount -a -r -t nfs,smbfs,cifs
+
+# Shut down PCMCIA devices:
+if [ -x /etc/rc.d/rc.pcmcia ] ; then
+  . /etc/rc.d/rc.pcmcia stop
+  # The cards might need a little extra time here to deactivate:
+  sleep 5
+fi
+
+# Terminate acpid before syslog:
+if [ -x /etc/rc.d/rc.acpid -a -r /var/run/acpid.pid ]; then # quit
+  . /etc/rc.d/rc.acpid stop
+fi
+
+# Kill all processes.
+echo
+echo "Sending all processes the SIGHUP signal."
+killall5 -1
+echo -n "Waiting for processes to hang up"
+for loop in 0 1 2 3 4 5 ; do
+  sleep 1
+  echo -n "."
+done
+echo
+echo "Sending all processes the SIGTERM signal."
+killall5 -15
+echo -n "Waiting for processes to terminate"
+for loop in 0 1 2 3 4 5 ; do
+  sleep 1
+  echo -n "."
+done
+echo
+echo "Sending all processes the SIGKILL signal."
+killall5 -9
+echo -n "Waiting for processes to exit"
+for loop in 0 1 2 3 4 5 ; do
+  sleep 1
+  echo -n "."
+done
+echo
+
+# Now go to the single user level
+echo "Going to single user mode..."
+telinit -t 1 1
+
diff --git a/source/a/sysvinit-scripts/scripts/rc.M b/source/a/sysvinit-scripts/scripts/rc.M
new file mode 100644
index 00000000..fe2c9b6f
--- /dev/null
+++ b/source/a/sysvinit-scripts/scripts/rc.M
@@ -0,0 +1,355 @@
+#!/bin/sh
+#
+# rc.M		This file is executed by init(8) when the system is being
+#		initialized for one of the "multi user" run levels (i.e.
+#		levels 1 through 6).  It usually does mounting of file
+#		systems et al.
+#
+# Version:	@(#)/etc/rc.d/rc.M	2.23	Wed Feb 26 19:20:58 PST 2003
+#
+# Author:	Fred N. van Kempen, <waltje@uwalt.nl.mugnet.org>
+#		Heavily modified by Patrick Volkerding <volkerdi@slackware.com>
+#
+
+# Tell the viewers what's going to happen.
+echo "Going multiuser..."
+
+# Update all the shared library links:
+if [ -x /sbin/ldconfig ]; then
+  echo "Updating shared library links:  /sbin/ldconfig &"
+  /sbin/ldconfig &
+fi
+
+# Screen blanks after 15 minutes idle time, and powers down in one hour
+# if the kernel supports APM or ACPI power management:
+/bin/setterm -blank 15 -powersave powerdown -powerdown 60
+
+# Set the hostname.
+if [ -r /etc/HOSTNAME ]; then
+  /bin/hostname $(cat /etc/HOSTNAME | cut -f1 -d .)
+else
+  # fall back on this old default:
+  echo "darkstar.example.net" > /etc/HOSTNAME
+  /bin/hostname darkstar
+fi
+
+# Save the contents of 'dmesg':
+/bin/dmesg -s 65536 > /var/log/dmesg
+
+# Initialize PCMCIA devices:
+#
+# NOTE: This used to be started near the top of rc.S so that PCMCIA devices
+# could be fsck'ed along with the other drives.  This had some unfortunate
+# side effects, however, since root isn't yet read-write, and /var might not
+# even be mounted the .pid files can't be correctly written in /var/run and
+# the pcmcia system can't be correctly shut down.  If you want some PCMCIA
+# partition to be mounted at boot (or when the card is inserted) then add
+# the appropriate lines to /etc/pcmcia/scsi.opts.
+#
+# Note that the stuff in /etc/pcmcia/ is only for 2.4.x kernels using
+# 16-bit PCMCIA cards (not 32-bit Cardbus cards!).  For example, with a
+# wireless card you might need to set options in /etc/pcmcia OR in
+# /etc/rc.d/rc.wireless.conf, or even in /etc/rc.d/rc.inet1.conf (with
+# extra options if needed for the encryption key, ESSID, etc.)
+#
+# Hopefully this situation will be unified in the future, but for now
+# that's how it is...
+#
+if [ -x /etc/rc.d/rc.pcmcia ]; then
+  . /etc/rc.d/rc.pcmcia start
+  # The cards might need a little extra time here to initialize.
+  sleep 5
+fi
+
+# Start the system logger.
+if [ -x /etc/rc.d/rc.syslog -a -x /usr/sbin/syslogd -a -d /var/log ]; then
+  . /etc/rc.d/rc.syslog start
+fi
+
+# Update the X font indexes:
+if [ -x /usr/bin/fc-cache ]; then
+  echo "Updating X font indexes:  /usr/bin/fc-cache -f &"
+  /usr/bin/fc-cache -f &
+fi
+
+# If we are returning from single-user mode we will need to restart
+# udevd on systems that use udev:
+if grep -wq sysfs /proc/mounts && grep -wq tmpfs /proc/filesystems ; then
+  if ! grep -wq nohotplug /proc/cmdline ; then
+    if [ -x /etc/rc.d/rc.udev ]; then
+      /bin/sh /etc/rc.d/rc.udev start
+    fi
+  fi
+fi
+
+# Initialize the networking hardware.
+if [ -x /etc/rc.d/rc.inet1 ]; then
+  . /etc/rc.d/rc.inet1
+fi
+
+# Look for additional USB/SCSI/IEEE1394/etc devices on multiple LUNs:
+if [ -x /etc/rc.d/rc.scanluns ]; then
+  . /etc/rc.d/rc.scanluns
+fi
+
+# Start networking daemons:
+if [ -x /etc/rc.d/rc.inet2 ]; then
+  . /etc/rc.d/rc.inet2
+fi
+
+# Mount any additional filesystem types that haven't already been mounted:
+mount -a -v 2> /dev/null | grep -v "already mounted"
+
+# Start the Network Time Protocol daemon:
+if [ -x /etc/rc.d/rc.ntpd ]; then
+  sh /etc/rc.d/rc.ntpd start
+fi
+
+# Remove stale locks and junk files (must be done after mount -a!)
+/bin/rm -f /var/lock/* /var/spool/uucp/LCK..* /tmp/.X*lock /tmp/core /core 2> /dev/null
+
+# Remove stale hunt sockets so the game can start.
+if [ -r /tmp/hunt -o -r /tmp/hunt.stats ]; then
+  echo "Removing your stale hunt sockets from /tmp."
+  /bin/rm -f /tmp/hunt*
+fi
+
+# Ensure basic filesystem permissions sanity.
+chmod 755 / 2> /dev/null
+chmod 1777 /tmp /var/tmp
+
+# Start APM or ACPI daemon.
+# If APM is enabled in the kernel, start apmd:
+if [ -e /proc/apm ]; then
+  if [ -x /usr/sbin/apmd ]; then
+    echo "Starting APM daemon:  /usr/sbin/apmd"
+    /usr/sbin/apmd
+  fi
+elif [ -x /etc/rc.d/rc.acpid ]; then # otherwise, start acpid:
+  . /etc/rc.d/rc.acpid start
+fi
+
+# Update any existing icon cache files:
+if find /usr/share/icons 2> /dev/null | grep -q icon-theme.cache ; then
+  for theme_dir in /usr/share/icons/* ; do
+    if [ -r ${theme_dir}/icon-theme.cache ]; then
+      echo "Updating icon-theme.cache in ${theme_dir}..."
+      /usr/bin/gtk-update-icon-cache -t -f ${theme_dir} 1> /dev/null 2> /dev/null &
+    fi
+  done
+  # This would be a large file and probably shouldn't be there.
+  if [ -r /usr/share/icons/icon-theme.cache ]; then
+    echo "Deleting icon-theme.cache in /usr/share/icons..."
+    #/usr/bin/gtk-update-icon-cache -t -f /usr/share/icons 1> /dev/null 2> /dev/null &
+    rm -f /usr/share/icons/icon-theme.cache
+  fi
+fi
+
+# Update mime database:
+if [ -x /usr/bin/update-mime-database -a -d /usr/share/mime ]; then
+  echo "Updating MIME database:  /usr/bin/update-mime-database /usr/share/mime &"
+  /usr/bin/update-mime-database /usr/share/mime 1> /dev/null 2> /dev/null &
+fi
+
+# Start D-Bus:
+if [ -x /etc/rc.d/rc.messagebus ]; then
+  sh /etc/rc.d/rc.messagebus start
+fi
+
+# Start HAL:
+if [ -x /etc/rc.d/rc.hald ]; then
+  sh /etc/rc.d/rc.hald start
+fi
+
+# Start Bluetooth:
+if [ -x /etc/rc.d/rc.bluetooth ]; then
+  sh /etc/rc.d/rc.bluetooth start
+fi
+
+# Start wicd:
+if [ -x /etc/rc.d/rc.wicd ]; then
+  sh /etc/rc.d/rc.wicd start
+fi
+
+# These GTK+/pango files need to be kept up to date for
+# proper input method, pixbuf loaders, and font support.
+if [ -x /usr/bin/update-gtk-immodules ]; then
+  /usr/bin/update-gtk-immodules --verbose
+fi
+if [ -x /usr/bin/update-gdk-pixbuf-loaders ]; then
+  /usr/bin/update-gdk-pixbuf-loaders --verbose
+fi
+if [ -x /usr/bin/update-pango-querymodules ]; then
+  /usr/bin/update-pango-querymodules --verbose
+fi
+
+# Start dnsmasq, a simple DHCP/DNS server:
+if [ -x /etc/rc.d/rc.dnsmasq ]; then
+  /etc/rc.d/rc.dnsmasq start
+fi
+
+# Start snmpd:
+if [ -x /etc/rc.d/rc.snmpd ]; then
+  /etc/rc.d/rc.snmpd start
+fi
+
+# Start the print spooling system.  This will usually be LPRng (lpd) or CUPS.
+if [ -x /etc/rc.d/rc.cups ]; then
+  # Start CUPS:
+  /etc/rc.d/rc.cups start
+elif [ -x /etc/rc.d/rc.lprng ]; then
+  # Start LPRng (lpd):
+  . /etc/rc.d/rc.lprng start
+fi
+
+# Start netatalk. (a file/print server for Macs using Appletalk)
+if [ -x /etc/rc.d/rc.atalk ]; then
+  /etc/rc.d/rc.atalk
+fi
+
+# Start smartd, which monitors the status of S.M.A.R.T. compatible
+# hard drives and reports any problems.  Note some devices (which aren't
+# smart, I guess ;) will hang if probed by smartd, so it's commented out
+# by default.
+#if [ -x /usr/sbin/smartd ]; then
+#  /usr/sbin/smartd
+#fi
+
+# If we're using udev, make /dev/cdrom and any other optical drive symlinks
+# if some udev rule hasn't made them already:
+if grep -wq sysfs /proc/mounts && grep -wq tmpfs /proc/filesystems; then
+  if ! grep -wq nohotplug /proc/cmdline ; then
+    if [ -x /lib/udev/rc.optical-symlinks -a -x /etc/rc.d/rc.udev ]; then
+      /bin/sh /lib/udev/rc.optical-symlinks
+    fi
+  fi
+fi
+
+# Monitor the UPS with genpowerd.
+# To use this, uncomment this section and edit your settings in
+# /etc/genpowerd.conf (serial device, UPS type, etc).  For more information,
+# see "man genpowerd" or the extensive documentation in the
+# /usr/doc/genpower-*/ directory.
+# You'll also need to configure a similar block in /etc/rc.d/rc.6 if you want
+# support for stopping the UPS's inverter after the machine halts.
+#if [ -x /sbin/genpowerd ]; then
+#  echo "Starting genpowerd daemon..."
+#  /sbin/genpowerd
+#fi
+
+# Turn on process accounting.  To enable process accounting, make sure the
+# option for BSD process accounting is enabled in your kernel, and then
+# create the file /var/log/pacct (touch /var/log/pacct).  By default, process
+# accounting is not enabled (since /var/log/pacct does not exist).  This is
+# because the log file can get VERY large.
+if [ -x /sbin/accton -a -r /var/log/pacct ]; then
+  chmod 640 /var/log/pacct
+  /sbin/accton /var/log/pacct
+fi
+
+# Start crond (Dillon's crond):
+# If you want cron to actually log activity to /var/log/cron, then change
+# -l10 to -l8 to increase the logging level.
+if [ -x /usr/sbin/crond ]; then
+  /usr/sbin/crond -l10 >>/var/log/cron 2>&1
+fi
+
+# Start atd (manages jobs scheduled with 'at'):
+if [ -x /usr/sbin/atd ]; then
+  /usr/sbin/atd -b 15 -l 1
+fi
+
+# Slackware-Mini-Quota-HOWTO:
+# To really activate quotas, you'll need to add 'usrquota' and/or 'grpquota' to
+# the appropriate partitions as listed in /etc/fstab.  Here's an example:
+#
+# /dev/hda2      /home      ext3     defaults,usrquota      1   1
+#
+# You'll then need to setup initial quota files at the top of the partitions
+# to support quota, like this:
+# touch /home/aquota.user /home/aquota.group
+# chmod 600 /home/aquota.user /home/aquota.group
+#
+# Then, reboot to activate the system.
+# To edit user quotas, use 'edquota'.  See 'man edquota'.  Also, the
+# official Quota Mini-HOWTO has lots of useful information.  That can be found
+# here:  /usr/doc/Linux-HOWTOs/Quota
+
+# Check quotas and then turn quota system on:
+if grep -q quota /etc/fstab ; then
+  for quotafs in $(awk '/quota/ {print $2}' /etc/fstab) ; do
+    /bin/rm -f $quotafs/{a,}quota.{group,user}.new
+  done
+  if [ -x /sbin/quotacheck ]; then
+    echo "Checking filesystem quotas:  /sbin/quotacheck -avugm"
+    /sbin/quotacheck -avugm
+  fi
+  if [ -x /sbin/quotaon ]; then
+    echo "Activating filesystem quotas:  /sbin/quotaon -avug"
+    /sbin/quotaon -avug
+  fi
+fi
+
+# Start the SASL authentication server.  This provides SASL
+# authentication services for sendmail:
+if [ -x /etc/rc.d/rc.saslauthd ]; then
+  . /etc/rc.d/rc.saslauthd start
+fi
+
+# Start the sendmail daemon:
+if [ -x /etc/rc.d/rc.sendmail ]; then
+  . /etc/rc.d/rc.sendmail start
+fi
+
+# Load ALSA (sound) defaults:
+if [ -x /etc/rc.d/rc.alsa ]; then
+  . /etc/rc.d/rc.alsa
+fi
+
+# Load a custom screen font if the user has an rc.font script.
+if [ -x /etc/rc.d/rc.font ]; then
+  . /etc/rc.d/rc.font
+fi
+
+# Load a custom keymap if the user has an rc.keymap script.
+if [ -x /etc/rc.d/rc.keymap ]; then
+  . /etc/rc.d/rc.keymap
+fi
+
+# Start the MySQL database:
+if [ -x /etc/rc.d/rc.mysqld ]; then
+  . /etc/rc.d/rc.mysqld start
+fi
+
+# Start Apache web server:
+if [ -x /etc/rc.d/rc.httpd ]; then
+  . /etc/rc.d/rc.httpd start
+fi
+
+# Start OpenLDAP:
+if [ -x /etc/rc.d/rc.openldap ]; then
+  . /etc/rc.d/rc.openldap start
+fi
+
+# Start Samba (a file/print server for Win95/NT machines).
+# Samba can be started in /etc/inetd.conf instead.
+if [ -x /etc/rc.d/rc.samba ]; then
+  . /etc/rc.d/rc.samba start
+fi
+
+# Start the GPM mouse server:
+if [ -x /etc/rc.d/rc.gpm ]; then
+  . /etc/rc.d/rc.gpm start
+fi
+
+# If there are SystemV init scripts for this runlevel, run them.
+if [ -x /etc/rc.d/rc.sysvinit ]; then
+  . /etc/rc.d/rc.sysvinit
+fi
+
+# Start the local setup procedure.
+if [ -x /etc/rc.d/rc.local ]; then
+  . /etc/rc.d/rc.local
+fi
+
+# All done.
diff --git a/source/a/sysvinit-scripts/scripts/rc.S b/source/a/sysvinit-scripts/scripts/rc.S
new file mode 100644
index 00000000..a0072d28
--- /dev/null
+++ b/source/a/sysvinit-scripts/scripts/rc.S
@@ -0,0 +1,382 @@
+#!/bin/sh
+#
+# /etc/rc.d/rc.S:  System initialization script.
+#
+# Mostly written by:  Patrick J. Volkerding, <volkerdi@slackware.com>
+#
+
+PATH=/sbin:/usr/sbin:/bin:/usr/bin
+
+# Mount /proc right away:
+/sbin/mount -v proc /proc -n -t proc
+
+# Mount sysfs next, if the kernel supports it:
+if [ -d /sys ]; then
+  if grep -wq sysfs /proc/filesystems ; then
+    if ! grep -wq sysfs /proc/mounts ; then
+      /sbin/mount -v sysfs /sys -n -t sysfs
+    fi
+  fi
+fi
+
+# Initialize udev to manage /dev entries and hotplugging for 2.6.x kernels.
+# You may turn off udev by making the /etc/rc.d/rc.udev file non-executable
+# or giving the "nohotplug" option at boot, but in the 2.6.x+ kernels udev
+# has taken over the job of hotplug (finding hardware and loading the kernel
+# modules for it, as well as creating device nodes in /dev).  Realize that
+# if you turn off udev that you will have to load all the kernel modules
+# that you need yourself (possibly in /etc/rc.d/rc.modules, which does not
+# promise to list all of them), and make any additional device nodes that you
+# need in the /dev directory.  Even USB and IEEE1394 devices will need to have
+# the modules loaded by hand if udev is not used with a 2.6 kernel.  So use it.  :-)
+if grep -wq sysfs /proc/mounts && grep -wq tmpfs /proc/filesystems ; then
+  if ! grep -wq nohotplug /proc/cmdline ; then
+    if [ -x /etc/rc.d/rc.udev ]; then
+      /bin/sh /etc/rc.d/rc.udev start
+    fi
+  fi
+fi
+
+# Initialize the Logical Volume Manager.
+# This won't start unless we find /etc/lvmtab (LVM1) or
+# /etc/lvm/backup/ (LVM2).  This is created by /sbin/vgscan, so to
+# use LVM you must run /sbin/vgscan yourself the first time (and
+# create some VGs and LVs).
+if [ -r /etc/lvmtab -o -d /etc/lvm/backup ]; then
+  echo "Initializing LVM (Logical Volume Manager):"
+  # Check for device-mapper support.
+  if ! grep -wq device-mapper /proc/devices ; then
+    # Try to load a device-mapper kernel module:
+    /sbin/modprobe -q dm-mod
+  fi
+  # Scan for new volume groups:
+  /sbin/vgscan --mknodes --ignorelockingfailure 2> /dev/null
+  if [ $? = 0 ]; then
+    # Make volume groups available to the kernel.
+    # This should also make logical volumes available.
+    /sbin/vgchange -ay --ignorelockingfailure
+  fi
+fi
+
+# Open any volumes created by cryptsetup:
+if [ -f /etc/crypttab -a -x /sbin/cryptsetup.static ]; then
+  # First, check for device-mapper support.
+  if ! grep -wq device-mapper /proc/devices ; then
+    # If device-mapper exists as a module, try to load it.
+    # Try to load a device-mapper kernel module:
+    /sbin/modprobe -q dm-mod
+  fi
+  # NOTE: we only support LUKS formatted volumes (except for swap)!
+  cat /etc/crypttab | grep -v "^#" | grep -v "^$" | while read line; do
+    eval LUKSARRAY=( $line )
+    LUKS="${LUKSARRAY[0]}"
+    DEV="${LUKSARRAY[1]}"
+    PASS="${LUKSARRAY[2]}"
+    OPTS="${LUKSARRAY[3]}"
+    LUKSOPTS=""
+    if echo $OPTS | grep -wq ro ; then LUKSOPTS="${LUKSOPTS} --readonly" ; fi
+
+    # Skip LUKS volumes that were already unlocked (in the initrd):
+    /sbin/cryptsetup.static status $LUKS 1>/dev/null 2>/dev/null && continue
+    if /sbin/cryptsetup.static isLuks $DEV 2>/dev/null ; then
+      echo "Unlocking LUKS crypt volume '${LUKS}' on device '$DEV':"
+      if [ -n "${PASS}" ]; then
+        if [ -f ${PASS} ]; then
+          /sbin/cryptsetup.static ${LUKSOPTS} --key-file=${PASS} luksOpen $DEV $LUKS
+        elif [ "${PASS}" != "none" ]; then
+          # A password field of 'none' indicates a line for swap:
+          echo "${PASS}" | /sbin/cryptsetup.static ${LUKSOPTS} luksOpen $DEV $LUKS
+        fi
+      else
+        for i in seq 1 3 ; do
+          /sbin/cryptsetup.static ${LUKSOPTS} luksOpen $DEV $LUKS </dev/tty0 >/dev/tty0 2>&1
+          [ $? -eq 0 ] && break
+        done
+      fi
+    elif echo $OPTS | grep -wq swap ; then
+      # If any of the volumes is to be used as encrypted swap,
+      # then encrypt it using a random key and run mkswap:
+      echo "Creating encrypted swap on device '$DEV' mapped to '${LUKS}':"
+      /sbin/cryptsetup.static --cipher=aes --key-file=/dev/urandom --key-size=256 create $LUKS $DEV
+      mkswap /dev/mapper/$LUKS
+    fi
+  done
+fi
+
+# Enable swapping:
+/sbin/swapon -a
+
+# Start FUSE, if requested:
+if [ -x /etc/rc.d/rc.fuse ]; then
+  sh /etc/rc.d/rc.fuse start
+fi
+
+# Set the system time from the hardware clock using hwclock --hctosys.
+if [ -x /sbin/hwclock ]; then
+  # Check for a broken motherboard RTC clock (where ioports for rtc are
+  # unknown) to prevent hwclock causing a hang:
+  if ! grep -q -w rtc /proc/ioports ; then
+    CLOCK_OPT="--directisa"
+  fi
+  if grep -wq "^UTC" /etc/hardwareclock ; then
+    echo "Setting system time from the hardware clock (UTC)."
+    /sbin/hwclock $CLOCK_OPT --utc --hctosys
+  else
+    echo "Setting system time from the hardware clock (localtime)."
+    /sbin/hwclock $CLOCK_OPT --localtime --hctosys
+  fi
+fi
+
+# Test to see if the root partition is read-only, like it ought to be.
+READWRITE=no
+if touch /fsrwtestfile 2>/dev/null; then
+  rm -f /fsrwtestfile
+  READWRITE=yes
+else
+  echo "Testing root filesystem status:  read-only filesystem"
+fi
+
+# See if a forced filesystem check was requested at shutdown:
+if [ -r /etc/forcefsck ]; then
+  FORCEFSCK="-f"
+fi
+
+# Check the root filesystem:
+if [ ! $READWRITE = yes ]; then
+  RETVAL=0
+  if [ ! -r /etc/fastboot ]; then
+    echo "Checking root filesystem:"
+    /sbin/fsck $FORCEFSCK -C -a /
+    RETVAL=$?
+  fi
+  # An error code of 2 or higher will require a reboot.
+  if [ $RETVAL -ge 2 ]; then
+    # An error code equal to or greater than 4 means that some errors
+    # could not be corrected.  This requires manual attention, so we
+    # offer a chance to try to fix the problem in single-user mode:
+    if [ $RETVAL -ge 4 ]; then
+      echo
+      echo "***********************************************************"
+      echo "*** An error occurred during the root filesystem check. ***"
+      echo "*** You will now be given a chance to log into the      ***"
+      echo "*** system in single-user mode to fix the problem.      ***"
+      echo "***                                                     ***"
+      echo "*** If you are using the ext2 filesystem, running       ***"
+      echo "*** 'e2fsck -v -y <partition>' might help.              ***"
+      echo "***********************************************************"
+      echo
+      echo "Once you exit the single-user shell, the system will reboot."
+      echo
+      PS1="(Repair filesystem) \#"; export PS1
+      sulogin
+    else # With an error code of 2 or 3, reboot the machine automatically:
+      echo
+      echo "***********************************"
+      echo "*** The filesystem was changed. ***"
+      echo "*** The system will now reboot. ***"
+      echo "***********************************"
+      echo
+    fi
+    echo "Unmounting file systems."
+    /sbin/umount -a -r
+    /sbin/mount -n -o remount,ro /
+    echo "Rebooting system."
+    sleep 2
+    reboot -f
+  fi
+  # Remount the root filesystem in read-write mode
+  echo "Remounting root device with read-write enabled."
+  /sbin/mount -w -v -n -o remount /
+  if [ $? -gt 0 ] ; then
+    echo
+    echo "Attempt to remount root device as read-write failed!  This is going to"
+    echo "cause serious problems."
+    echo 
+    echo "If you're using the UMSDOS filesystem, you **MUST** mount the root partition"
+    echo "read-write!  You can make sure the root filesystem is getting mounted "
+    echo "read-write with the 'rw' flag to Loadlin:"
+    echo
+    echo "loadlin vmlinuz root=/dev/hda1 rw   (replace /dev/hda1 with your root device)"
+    echo
+    echo "Normal bootdisks can be made to mount a system read-write with the rdev command:"
+    echo
+    echo "rdev -R /dev/fd0 0"
+    echo
+    echo "You can also get into your system by using a boot disk with a command like this"
+    echo "on the LILO prompt line:  (change the root partition name as needed)"
+    echo 
+    echo "LILO: mount root=/dev/hda1 rw"
+    echo
+    echo "Please press ENTER to continue, then reboot and use one of the above methods to"
+    echo -n "get into your machine and start looking for the problem. " 
+    read junk; 
+  fi
+else
+  echo "Testing root filesystem status:  read-write filesystem"
+  echo
+  echo "*** ERROR: Root partition has already been mounted read-write. Cannot check!"
+  echo
+  echo "For filesystem checking to work properly, your system must initially mount"
+  echo "the root partition as read only. Please modify your kernel with 'rdev' so that"
+  echo "it does this. If you're booting with LILO, add a line:"
+  echo
+  echo "   read-only"
+  echo
+  echo "to the Linux section in your /etc/lilo.conf and type 'lilo' to reinstall it."
+  echo
+  echo "If you boot from a kernel on a floppy disk, put it in the drive and type:"
+  echo "   rdev -R /dev/fd0 1"
+  echo
+  echo "If you boot from a bootdisk, or with Loadlin, you can add the 'ro' flag."
+  echo
+  echo "This will fix the problem *AND* eliminate this annoying message. :^)"
+  echo
+  echo -n "Press ENTER to continue. "
+  read junk;
+fi # Done checking root filesystem
+
+# Any /etc/mtab that exists here is old, so we delete it to start over:
+/bin/rm -f /etc/mtab*
+# Remounting the / partition will initialize the new /etc/mtab:
+/sbin/mount -w -o remount /
+
+# Read in the correct / filesystem complete with arguments so mount will
+# show them correctly. This does not stop those arguments from functioning
+# but does prevent a small bug with /etc/mtab.
+/bin/grep ' / ' /proc/mounts | grep -v "^rootfs" > /etc/mtab
+
+# Fix /etc/mtab to list sys and proc if they were not yet entered in
+# /etc/mtab because / was still mounted read-only:
+if [ -d /proc/sys ]; then
+  /sbin/mount -f proc /proc -t proc
+fi
+if [ -d /sys/bus ]; then
+  /sbin/mount -f sysfs /sys -t sysfs
+fi
+
+# Configure ISA Plug-and-Play devices:
+if [ -r /etc/isapnp.conf ]; then
+  if [ -x /sbin/isapnp ]; then
+    /sbin/isapnp /etc/isapnp.conf
+  fi
+fi
+
+# This loads any kernel modules that are needed.  These might be required to
+# use your ethernet card, sound card, or other optional hardware.
+# Priority is given first to a script named "rc.modules.local", then
+# to "rc.modules-$FULL_KERNEL_VERSION", and finally to the plain "rc.modules".
+# Note that if /etc/rc.d/rc.modules.local is found, then that will be the ONLY
+# rc.modules script the machine will run, so make sure it has everything in
+# it that you need.
+if [ -x /etc/rc.d/rc.modules.local -a -r /proc/modules ]; then
+  echo "Running /etc/rc.d/rc.modules.local:"
+  /bin/sh /etc/rc.d/rc.modules.local
+elif [ -x /etc/rc.d/rc.modules-$(uname -r) -a -r /proc/modules ]; then
+  echo "Running /etc/rc.d/rc.modules-$(uname -r):"
+  . /etc/rc.d/rc.modules-$(uname -r)
+elif [ -x /etc/rc.d/rc.modules -a -r /proc/modules -a -L /etc/rc.d/rc.modules ]; then
+  echo "Running /etc/rc.d/rc.modules -> $(readlink /etc/rc.d/rc.modules):"
+  . /etc/rc.d/rc.modules
+elif [ -x /etc/rc.d/rc.modules -a -r /proc/modules ]; then
+  echo "Running /etc/rc.d/rc.modules:"
+  . /etc/rc.d/rc.modules
+fi
+
+# Configure runtime kernel parameters:
+if [ -x /sbin/sysctl -a -r /etc/sysctl.conf ]; then
+  /sbin/sysctl -e -p /etc/sysctl.conf
+fi
+
+# Check all the non-root filesystems:
+if [ ! -r /etc/fastboot ]; then
+  echo "Checking non-root filesystems:"
+  /sbin/fsck $FORCEFSCK -C -R -A -a
+fi
+
+# Mount usbfs:
+if grep -wq usbfs /proc/filesystems; then
+  if ! grep -wq usbfs /proc/mounts ; then
+    if ! grep -wq usbfs /etc/fstab; then
+      /sbin/mount -v usbfs /proc/bus/usb -t usbfs
+    else
+      /sbin/mount -v /proc/bus/usb
+    fi
+  fi
+fi
+
+# Mount non-root file systems in fstab, but not NFS or SMB 
+# because TCP/IP is not yet configured, and not proc or sysfs
+# because those have already been mounted.  Also check that
+# devpts is not already mounted before attempting to mount
+# it.  With a 2.6.x or newer kernel udev mounts devpts.
+# We also need to wait a little bit to let USB and other
+# hotplugged devices settle (sorry to slow down the boot):
+echo "Mounting non-root local filesystems:"
+sleep 3
+if /bin/grep -wq devpts /proc/mounts ; then
+  /sbin/mount -a -v -t nonfs,nosmbfs,nocifs,noproc,nosysfs,nodevpts
+else
+  /sbin/mount -a -v -t nonfs,nosmbfs,nocifs,noproc,nosysfs
+fi
+
+# Enable swapping again.  This is needed in case a swapfile is used,
+# as it can't be enabled until the filesystem it resides on has been
+# mounted read-write.
+/sbin/swapon -a
+
+# Clean up some temporary files:
+rm -f /var/run/* /var/run/*/* /var/run/*/*/* /etc/nologin \
+  /etc/dhcpc/*.pid /etc/forcefsck /etc/fastboot \
+  /var/state/saslauthd/saslauthd.pid \
+  /tmp/.Xauth* 1> /dev/null 2> /dev/null
+  ( cd /var/log/setup/tmp && rm -rf * )
+  ( cd /tmp && rm -rf kde-[a-zA-Z]* ksocket-[a-zA-Z]* hsperfdata_[a-zA-Z]* plugtmp* )
+
+# Create /tmp/{.ICE-unix,.X11-unix} if they are not present:
+if [ ! -e /tmp/.ICE-unix ]; then
+  mkdir -p /tmp/.ICE-unix
+  chmod 1777 /tmp/.ICE-unix
+fi
+if [ ! -e /tmp/.X11-unix ]; then
+  mkdir -p /tmp/.X11-unix
+  chmod 1777 /tmp/.X11-unix
+fi
+
+# Create a fresh utmp file:
+touch /var/run/utmp
+chown root:utmp /var/run/utmp
+chmod 664 /var/run/utmp
+
+# Update the current kernel level in the /etc/motd (Message Of The Day) file,
+# if the first line of that file begins with the word 'Linux'.
+# You are free to modify the rest of the file as you see fit.
+if [ -x /bin/sed ]; then
+  /bin/sed -i "{1s/^Linux.*/$(/bin/uname -sr)\./}" /etc/motd
+fi
+
+# If there are SystemV init scripts for this runlevel, run them.
+if [ -x /etc/rc.d/rc.sysvinit ]; then
+  . /etc/rc.d/rc.sysvinit
+fi
+
+# Run serial port setup script:
+# CAREFUL!  This can make some systems hang if the rc.serial script isn't
+# set up correctly.  If this happens, you may have to edit the file from a
+# boot disk, and/or set it as non-executable:
+if [ -x /etc/rc.d/rc.serial ]; then
+  sh /etc/rc.d/rc.serial start
+fi
+
+# Carry an entropy pool between reboots to improve randomness.
+if [ -f /etc/random-seed ]; then
+  echo "Using /etc/random-seed to initialize /dev/urandom."
+  cat /etc/random-seed > /dev/urandom
+fi
+# Use the pool size from /proc, or 512 bytes:
+if [ -r /proc/sys/kernel/random/poolsize ]; then
+  dd if=/dev/urandom of=/etc/random-seed count=1 bs=$(cat /proc/sys/kernel/random/poolsize) 2> /dev/null
+else
+  dd if=/dev/urandom of=/etc/random-seed count=1 bs=512 2> /dev/null
+fi
+chmod 600 /etc/random-seed
+
diff --git a/source/a/sysvinit-scripts/scripts/rc.local b/source/a/sysvinit-scripts/scripts/rc.local
new file mode 100644
index 00000000..65b358bb
--- /dev/null
+++ b/source/a/sysvinit-scripts/scripts/rc.local
@@ -0,0 +1,9 @@
+#!/bin/sh
+#
+# /etc/rc.d/rc.local:  Local system initialization script.
+#
+# Put any local startup commands in here.  Also, if you have
+# anything that needs to be run at shutdown time you can
+# make an /etc/rc.d/rc.local_shutdown script and put those
+# commands in there.
+
diff --git a/source/a/sysvinit-scripts/scripts/rc.sysvinit b/source/a/sysvinit-scripts/scripts/rc.sysvinit
new file mode 100644
index 00000000..916e59ee
--- /dev/null
+++ b/source/a/sysvinit-scripts/scripts/rc.sysvinit
@@ -0,0 +1,58 @@
+#!/bin/sh
+#
+# rc.sysvinit   This file provides basic compatibility with SystemV style
+#               startup scripts.  The SystemV style init system places 
+#               start/stop scripts for each runlevel into directories such as
+#               /etc/rc.d/rc3.d/ (for runlevel 3) instead of starting them
+#               from /etc/rc.d/rc.M.  This makes for a lot more init scripts,
+#               and a more complicated execution path to follow through if
+#               something goes wrong.  For this reason, Slackware has always
+#               used the traditional BSD style init script layout.
+#
+#               However, many binary packages exist that install SystemV
+#               init scripts.  With rc.sysvinit in place, most well-written
+#               startup scripts will work.  This is primarily intended to
+#               support commercial software, though, and probably shouldn't
+#               be considered bug free.
+#
+#               Written by Patrick Volkerding <volkerdi@slackware.com>, 1999
+#               from an example by Miquel van Smoorenburg <miquels@cistron.nl>.
+
+# Run an init script:
+startup() {
+  case "$1" in
+  *.sh)
+    sh "$@"
+    ;;
+  *)
+    "$@"
+    ;;
+  esac
+}
+
+# Set onlcr to avoid staircase effect.
+stty onlcr 0>&1
+
+if [ "$runlevel" = "" ]; then
+  runlevel=$RUNLEVEL
+  export runlevel
+  prevlevel=$PREVLEVEL
+  export prevlevel
+fi
+
+# Run kill scripts in the previous runlevel if not "none"
+if [ ! "$prevlevel" = "N" ]; then
+  for script in /etc/rc.d/rc$prevlevel.d/K* ; do
+    if [ -x $script ]; then
+      startup $script stop
+    fi
+  done
+fi
+
+# Now do the startup scripts:
+for script in /etc/rc.d/rc$runlevel.d/S* ; do
+  if [ -x $script ]; then
+    startup $script start
+  fi
+done
+
diff --git a/source/a/sysvinit-scripts/scripts/rescan-scsi-bus.sh b/source/a/sysvinit-scripts/scripts/rescan-scsi-bus.sh
new file mode 100644
index 00000000..4378e208
--- /dev/null
+++ b/source/a/sysvinit-scripts/scripts/rescan-scsi-bus.sh
@@ -0,0 +1,558 @@
+#!/bin/bash
+# Skript to rescan SCSI bus, using the 
+# scsi add-single-device mechanism
+# (c) 1998--2008 Kurt Garloff <kurt@garloff.de>, GNU GPL v2 or later
+# (c) 2006--2008 Hannes Reinecke, GNU GPL v2 or later
+# $Id: rescan-scsi-bus.sh,v 1.29 2008/10/29 10:03:04 garloff Exp $
+
+setcolor ()
+{
+  red="\e[0;31m"
+  green="\e[0;32m"
+  yellow="\e[0;33m"
+  bold="\e[0;1m"
+  norm="\e[0;0m"
+}
+
+unsetcolor () 
+{
+  red=""; green=""
+  yellow=""; norm=""
+}
+
+# Return hosts. sysfs must be mounted
+findhosts_26 ()
+{
+  hosts=
+  if ! ls /sys/class/scsi_host/host* >/dev/null 2>&1; then
+    echo "No SCSI host adapters found in sysfs"
+    exit 1;
+  fi 
+  for hostdir in /sys/class/scsi_host/host*; do
+    hostno=${hostdir#/sys/class/scsi_host/host}
+    if [ -f $hostdir/isp_name ] ; then
+	hostname="qla2xxx"
+    elif [ -f $hostdir/lpfc_drvr_version ] ; then
+	hostname="lpfc"
+    else
+        hostname=`cat $hostdir/proc_name`
+    fi
+    hosts="$hosts $hostno"
+    echo "Host adapter $hostno ($hostname) found."
+  done
+  hosts=`echo $hosts | sed 's/ /\n/g' | sort -n`
+}
+
+# Return hosts. /proc/scsi/HOSTADAPTER/? must exist
+findhosts ()
+{
+  hosts=
+  for driverdir in /proc/scsi/*; do
+    driver=${driverdir#/proc/scsi/}
+    if test $driver = scsi -o $driver = sg -o $driver = dummy -o $driver = device_info; then continue; fi
+    for hostdir in $driverdir/*; do
+      name=${hostdir#/proc/scsi/*/}
+      if test $name = add_map -o $name = map -o $name = mod_parm; then continue; fi
+      num=$name
+      driverinfo=$driver
+      if test -r $hostdir/status; then
+	num=$(printf '%d\n' `sed -n 's/SCSI host number://p' $hostdir/status`)
+	driverinfo="$driver:$name"
+      fi
+      hosts="$hosts $num"
+      echo "Host adapter $num ($driverinfo) found."
+    done
+  done
+}
+
+# Get /proc/scsi/scsi info for device $host:$channel:$id:$lun
+# Optional parameter: Number of lines after first (default = 2), 
+# result in SCSISTR, return code 1 means empty.
+procscsiscsi ()
+{  
+  if test -z "$1"; then LN=2; else LN=$1; fi
+  CHANNEL=`printf "%02i" $channel`
+  ID=`printf "%02i" $id`
+  LUN=`printf "%02i" $lun`
+  if [ -d /sys/class/scsi_device ]; then
+      SCSIPATH="/sys/class/scsi_device/${host}:${channel}:${id}:${lun}"
+      if [ -d  "$SCSIPATH" ] ; then
+	  SCSISTR="Host: scsi${host} Channel: $CHANNEL Id: $ID Lun: $LUN"
+	  if [ "$LN" -gt 0 ] ; then
+	      IVEND=$(cat ${SCSIPATH}/device/vendor)
+	      IPROD=$(cat ${SCSIPATH}/device/model)
+	      IPREV=$(cat ${SCSIPATH}/device/rev)
+	      SCSIDEV=$(printf '  Vendor: %-08s Model: %-16s Rev: %-4s' "$IVEND" "$IPROD" "$IPREV")
+	      SCSISTR="$SCSISTR
+$SCSIDEV"
+	  fi
+	  if [ "$LN" -gt 1 ] ; then
+	      ILVL=$(cat ${SCSIPATH}/device/scsi_level)
+	      type=$(cat ${SCSIPATH}/device/type)
+	      case "$type" in
+		  0) ITYPE="Direct-Access    " ;;
+		  1) ITYPE="Sequential-Access" ;;
+		  2) ITYPE="Printer          " ;;
+		  3) ITYPE="Processor        " ;;
+		  4) ITYPE="WORM             " ;;
+		  5) ITYPE="CD-ROM           " ;;
+		  6) ITYPE="Scanner          " ;;
+		  7) ITYPE="Optical Device   " ;;
+		  8) ITYPE="Medium Changer   " ;;
+		  9) ITYPE="Communications   " ;;
+		  10) ITYPE="Unknown          " ;;
+		  11) ITYPE="Unknown          " ;;
+		  12) ITYPE="RAID             " ;;
+		  13) ITYPE="Enclosure        " ;;
+		  14) ITYPE="Direct-Access-RBC" ;;
+		  *) ITYPE="Unknown          " ;;
+	      esac
+	      SCSITMP=$(printf '  Type:   %-16s                ANSI SCSI revision: %02d' "$ITYPE" "$((ILVL - 1))")
+	      SCSISTR="$SCSISTR
+$SCSITMP"
+	  fi
+	      
+      else
+	  return 1
+      fi
+  else
+      grepstr="scsi$host Channel: $CHANNEL Id: $ID Lun: $LUN"
+      SCSISTR=`cat /proc/scsi/scsi | grep -A$LN -e"$grepstr"`
+  fi
+  if test -z "$SCSISTR"; then return 1; else return 0; fi
+}
+
+# Find sg device with 2.6 sysfs support
+sgdevice26 ()
+{
+  if test -e /sys/class/scsi_device/$host\:$channel\:$id\:$lun/device/generic; then	
+    SGDEV=`readlink /sys/class/scsi_device/$host\:$channel\:$id\:$lun/device/generic`
+    SGDEV=`basename $SGDEV`
+  else
+    for SGDEV in /sys/class/scsi_generic/sg*; do
+      DEV=`readlink $SGDEV/device`
+      if test "${DEV##*/}" = "$host:$channel:$id:$lun"; then
+	SGDEV=`basename $SGDEV`; return
+      fi
+    done
+    SGDEV=""
+  fi  
+}
+
+# Find sg device with 2.4 report-devs extensions
+sgdevice24 ()
+{
+  if procscsiscsi 3; then
+    SGDEV=`echo "$SCSISTR" | grep 'Attached drivers:' | sed 's/^ *Attached drivers: \(sg[0-9]*\).*/\1/'`
+  fi
+}
+
+# Find sg device that belongs to SCSI device $host $channel $id $lun
+sgdevice ()
+{
+  SGDEV=
+  if test -d /sys/class/scsi_device; then
+    sgdevice26
+  else  
+    DRV=`grep 'Attached drivers:' /proc/scsi/scsi 2>/dev/null`
+    repdevstat=$((1-$?))
+    if [ $repdevstat = 0 ]; then
+      echo "scsi report-devs 1" >/proc/scsi/scsi
+      DRV=`grep 'Attached drivers:' /proc/scsi/scsi 2>/dev/null`
+      if [ $? = 1 ]; then return; fi
+    fi
+    if ! `echo $DRV | grep 'drivers: sg' >/dev/null`; then
+      modprobe sg
+    fi
+    sgdevice24
+    if [ $repdevstat = 0 ]; then
+      echo "scsi report-devs 0" >/proc/scsi/scsi
+    fi
+  fi
+}       
+
+# Test if SCSI device is still responding to commands
+testonline ()
+{
+  : testonline
+  if test ! -x /usr/bin/sg_turs; then return 0; fi
+  sgdevice
+  if test -z "$SGDEV"; then return 0; fi
+  sg_turs /dev/$SGDEV >/dev/null 2>&1
+  RC=$?
+  # echo -e "\e[A\e[A\e[A${yellow}Test existence of $SGDEV = $RC ${norm} \n\n\n"
+  if test $RC = 1; then return $RC; fi
+  # OK, device online, compare INQUIRY string
+  INQ=`sg_inq $sg_len_arg /dev/$SGDEV`
+  IVEND=`echo "$INQ" | grep 'Vendor identification:' | sed 's/^[^:]*: \(.*\)$/\1/'`
+  IPROD=`echo "$INQ" | grep 'Product identification:' | sed 's/^[^:]*: \(.*\)$/\1/'`
+  IPREV=`echo "$INQ" | grep 'Product revision level:' | sed 's/^[^:]*: \(.*\)$/\1/'`
+  STR=`printf "  Vendor: %-08s Model: %-16s Rev: %-4s" "$IVEND" "$IPROD" "$IPREV"`
+  IPTYPE=`echo "$INQ" | sed -n 's/.* Device_type=\([0-9]*\) .*/\1/p'`
+  IPQUAL=`echo "$INQ" | sed -n 's/ *PQual=\([0-9]*\)  Device.*/\1/p'`
+  if [ "$IPQUAL" != 0 ] ; then
+    echo -e "\e[A\e[A\e[A\e[A${red}$SGDEV changed: ${bold}\nLU not available (PQual $IPQUAL)${norm}\n\n\n"
+    return 1
+  fi
+
+  procscsiscsi
+  TMPSTR=`echo "$SCSISTR" | grep 'Vendor:'`
+  if [ "$TMPSTR" != "$STR" ]; then
+    echo -e "\e[A\e[A\e[A\e[A${red}$SGDEV changed: ${bold}\nfrom:${TMPSTR#* } \nto: $STR ${norm}\n\n\n"
+    return 1
+  fi
+  TMPSTR=`echo "$SCSISTR" | sed -n 's/.*Type: *\(.*\) *ANSI.*/\1/p'`
+  if [ $TMPSTR != $TYPE ] ; then
+     echo -e "\e[A\e[A\e[A\e[A${red}$SGDEV changed: ${bold}\nfrom:${TMPSTR} \nto: $TYPE ${norm}\n\n\n"
+     return 1
+  fi  
+  return $RC
+}
+
+# Test if SCSI device $host $channen $id $lun exists
+# Outputs description from /proc/scsi/scsi, returns SCSISTR 
+testexist ()
+{
+  : testexist
+  SCSISTR=
+  if procscsiscsi; then
+    echo "$SCSISTR" | head -n1
+    echo "$SCSISTR" | tail -n2 | pr -o4 -l1
+  fi
+}
+
+# Returns the list of existing channels per host
+chanlist ()
+{
+  local hcil
+  local cil
+  local chan
+  local tmpchan
+
+  for dev in /sys/class/scsi_device/${host}:* ; do
+    hcil=${dev##*/}
+    cil=${hcil#*:}
+    chan=${cil%%:*}
+    for tmpchan in $channelsearch ; do
+      if test "$chan" -eq $tmpchan ; then
+	chan=
+      fi
+    done
+    if test -n "$chan" ; then
+      channelsearch="$channelsearch $chan"
+    fi
+  done
+}
+
+# Returns the list of existing targets per host
+idlist ()
+{
+  local hcil
+  local cil
+  local il
+  local target
+  local tmpid
+
+  for dev in /sys/class/scsi_device/${host}:${channel}:* ; do
+    hcil=${dev##*/}
+    cil=${hcil#*:}
+    il=${cil#*:}
+    target=${il%%:*}
+    for tmpid in $idsearch ; do
+      if test "$target" -eq $tmpid ; then
+	target=
+      fi
+    done
+    if test -n "$target" ; then
+      idsearch="$idsearch $target"
+    fi
+  done
+}
+
+# Returns the list of existing LUNs
+getluns ()
+{
+  if test ! -x /usr/bin/sg_luns; then return; fi
+  sgdevice
+  if test -z "$SGDEV"; then return; fi
+  sg_luns -d /dev/$SGDEV | sed -n 's/.*lun=\(.*\)/\1/p'
+}
+
+# Perform scan on a single lun
+dolunscan()
+{
+  SCSISTR=
+  devnr="$host $channel $id $lun"
+  echo "Scanning for device $devnr ..."
+  printf "${yellow}OLD: $norm"
+  testexist
+  : f $remove s $SCSISTR
+  if test "$remove" -a "$SCSISTR"; then
+    # Device exists: Test whether it's still online
+    # (testonline returns 1 if it's gone or has changed)
+    testonline
+    if test $? = 1 -o ! -z "$forceremove"; then
+      echo -en "\r\e[A\e[A\e[A${red}REM: "
+      echo "$SCSISTR" | head -n1
+      echo -e "${norm}\e[B\e[B"
+      if test -e /sys/class/scsi_device/${host}:${channel}:${id}:${lun}/device; then
+        echo 1 > /sys/class/scsi_device/${host}:${channel}:${id}:${lun}/device/delete
+        # Try reading, should fail if device is gone
+        echo "$channel $id $lun" > /sys/class/scsi_host/host${host}/scan
+      else
+        echo "scsi remove-single-device $devnr" > /proc/scsi/scsi
+        # Try reading, should fail if device is gone
+        echo "scsi add-single-device $devnr" > /proc/scsi/scsi
+      fi
+    fi
+    if test $RC = 0 ; then
+      if test -e /sys/class/scsi_device/${host}:${channel}:${id}:${lun}/device; then
+        echo 1 > /sys/class/scsi_device/${host}:${channel}:${id}:${lun}/device/rescan
+      fi
+    fi
+
+    printf "\r\x1b[A\x1b[A\x1b[A${yellow}OLD: $norm"
+    testexist
+    if test -z "$SCSISTR"; then
+      printf "\r${red}DEL: $norm\r\n\n"
+      let rmvd+=1;
+    fi
+  fi
+  if test -z "$SCSISTR"; then
+    # Device does not exist, try to add
+    printf "\r${green}NEW: $norm"
+    if test -e /sys/class/scsi_host/host${host}/scan; then
+      echo "$channel $id $lun" > /sys/class/scsi_host/host${host}/scan 2> /dev/null
+    else
+      echo "scsi add-single-device $devnr" > /proc/scsi/scsi
+    fi
+    testexist
+    if test -z "$SCSISTR"; then
+      # Device not present
+      printf "\r\x1b[A";
+      # Optimization: if lun==0, stop here (only if in non-remove mode)
+      if test $lun = 0 -a -z "$remove" -a $optscan = 1; then 
+        break;
+      fi
+    else 
+      let found+=1; 
+    fi
+  fi
+}
+
+# Perform report lun scan
+doreportlun()
+{
+  lun=0
+  SCSISTR=
+  devnr="$host $channel $id $lun"
+  echo "Scanning for device $devnr ..."
+  printf "${yellow}OLD: $norm"
+  testexist
+  if test -z "$SCSISTR"; then
+    # Device does not exist, try to add
+    printf "\r${green}NEW: $norm"
+    if test -e /sys/class/scsi_host/host${host}/scan; then
+      echo "$channel $id $lun" > /sys/class/scsi_host/host${host}/scan 2> /dev/null
+    else
+      echo "scsi add-single-device $devnr" > /proc/scsi/scsi
+    fi
+    testexist
+    if test -z "$SCSISTR"; then
+      # Device not present
+      printf "\r\x1b[A";
+      lunsearch=
+      return
+    fi
+  fi
+  lunsearch=`getluns`
+  lunremove=
+  # Check existing luns
+  for dev in /sys/class/scsi_device/$host\:$channel\:$id\:*; do
+    lun=${dev##*:}
+    newsearch=
+    oldsearch="$lunsearch"
+    for tmplun in $lunsearch; do
+      if test $tmplun -eq $lun ; then
+	# Optimization: don't scan lun 0 again
+	if [ $lun -ne 0 ]; then
+	  dolunscan
+	fi
+      else
+	newsearch="$newsearch $tmplun"
+      fi
+    done
+    if [ "${#oldsearch}" = "${#newsearch}" ] ; then
+	# Stale lun
+	lunremove="$lunremove $lun"
+    fi
+    lunsearch="$newsearch"
+  done
+  # Add new ones and check stale ones
+  for lun in $lunsearch $lunremove; do
+    dolunscan
+  done
+}
+  
+# Perform search (scan $host)
+dosearch ()
+{
+  if test -z "$channelsearch" ; then
+    chanlist
+  fi
+  for channel in $channelsearch; do
+    if test -z "$idsearch" ; then
+      idlist
+    fi
+    for id in $idsearch; do
+      if test -z "$lunsearch"; then
+	doreportlun
+      else
+	for lun in $lunsearch; do
+          dolunscan
+        done
+      fi
+    done
+  done
+}
+ 
+# main
+if test @$1 = @--help -o @$1 = @-h -o @$1 = @-?; then
+    echo "Usage: rescan-scsi-bus.sh [options] [host [host ...]]"
+    echo "Options:"
+    echo " -l      activates scanning for LUNs 0-7    [default: 0]"
+    echo " -L NUM  activates scanning for LUNs 0--NUM [default: 0]"
+    echo " -w      scan for target device IDs 0 .. 15 [default: 0-7]"
+    echo " -c      enables scanning of channels 0 1   [default: 0]"
+    echo " -r      enables removing of devices        [default: disabled]"
+    echo " -i      issue a FibreChannel LIP reset     [default: disabled]"
+    echo "--remove:        same as -r"
+    echo "--issue-lip:     same as -i"
+    echo "--forceremove:   Remove and readd every device (DANGEROUS)"
+    echo "--nooptscan:     don't stop looking for LUNs is 0 is not found"
+    echo "--color:         use coloured prefixes OLD/NEW/DEL"
+    echo "--hosts=LIST:    Scan only host(s) in LIST"
+    echo "--channels=LIST: Scan only channel(s) in LIST"
+    echo "--ids=LIST:      Scan only target ID(s) in LIST"
+    echo "--luns=LIST:     Scan only lun(s) in LIST"  
+    echo " Host numbers may thus be specified either directly on cmd line (deprecated) or"
+    echo " or with the --hosts=LIST parameter (recommended)."
+    echo "LIST: A[-B][,C[-D]]... is a comma separated list of single values and ranges"
+    echo " (No spaces allowed.)"
+    exit 0
+fi
+
+expandlist ()
+{
+    list=$1
+    result=""
+    first=${list%%,*}
+    rest=${list#*,}
+    while test ! -z "$first"; do 
+	beg=${first%%-*};
+	if test "$beg" = "$first"; then
+	    result="$result $beg";
+    	else
+    	    end=${first#*-}
+	    result="$result `seq $beg $end`"
+	fi
+	test "$rest" = "$first" && rest=""
+	first=${rest%%,*}
+	rest=${rest#*,}
+    done
+    echo $result
+}
+
+if test ! -d /sys/class/scsi_host/ -a ! -d /proc/scsi/; then
+  echo "Error: SCSI subsystem not active"
+  exit 1
+fi	
+
+# Make sure sg is there
+modprobe sg >/dev/null 2>&1
+
+sg_version=$(sg_inq -V 2>&1 | cut -d " " -f 3)
+sg_version=${sg_version##0.}
+if [ "$sg_version" -lt 70 ] ; then
+    sg_len_arg="-36"
+else
+    sg_len_arg="--len=36"
+fi
+
+# defaults
+unsetcolor
+lunsearch=""
+idsearch=`seq 0 7`
+channelsearch="0"
+remove=
+forceremove=
+optscan=1
+if test -d /sys/class/scsi_host; then 
+  findhosts_26
+else  
+  findhosts
+fi  
+
+# Scan options
+opt="$1"
+while test ! -z "$opt" -a -z "${opt##-*}"; do
+  opt=${opt#-}
+  case "$opt" in
+    l) lunsearch=`seq 0 7` ;;
+    L) lunsearch=`seq 0 $2`; shift ;;
+    w) idsearch=`seq 0 15` ;;
+    c) channelsearch="0 1" ;;
+    r) remove=1 ;;
+    i) lipreset=1 ;;
+    -remove)      remove=1 ;;
+    -forceremove) remove=1; forceremove=1 ;;
+    -hosts=*)     arg=${opt#-hosts=};   hosts=`expandlist $arg` ;;
+    -channels=*)  arg=${opt#-channels=};channelsearch=`expandlist $arg` ;; 
+    -ids=*)   arg=${opt#-ids=};         idsearch=`expandlist $arg` ;; 
+    -luns=*)  arg=${opt#-luns=};        lunsearch=`expandlist $arg` ;; 
+    -color) setcolor ;;
+    -nooptscan) optscan=0 ;;
+    -issue-lip) lipreset=1 ;;
+    *) echo "Unknown option -$opt !" ;;
+  esac
+  shift
+  opt="$1"
+done    
+
+# Hosts given ?
+if test "@$1" != "@"; then 
+  hosts=$*; 
+fi
+
+echo "Scanning SCSI subsystem for new devices"
+test -z "$remove" || echo " and remove devices that have disappeared"
+declare -i found=0
+declare -i rmvd=0
+for host in $hosts; do
+  echo -n "Scanning host $host "
+  if test -e /sys/class/fc_host/host$host ; then
+    # It's pointless to do a target scan on FC
+    if test -n "$lipreset" ; then
+      echo 1 > /sys/class/fc_host/host$host/issue_lip 2> /dev/null;
+      echo "- - -" > /sys/class/scsi_host/host$host/scan 2> /dev/null;
+    fi
+    channelsearch=""
+    idsearch=""
+  fi
+  [ -n "$channelsearch" ] && echo -n "channels $channelsearch "
+  echo -n "for "
+  if [ -n "$idsearch" ] ; then
+      echo -n " SCSI target IDs " $idsearch
+  else
+      echo -n " all SCSI target IDs"
+  fi
+  if [ -n "$lunsearch" ] ; then
+      echo ", LUNs " $lunsearch
+  else
+      echo ", all LUNs"
+  fi
+  dosearch; 
+done
+echo "$found new device(s) found.               "
+echo "$rmvd device(s) removed.                 "
+