Slackware 14.2slackware-14.2

Thu Jun 30 20:26:57 UTC 2016
Slackware 14.2 x86_64 stable is released!

The long development cycle (the Linux community has lately been living in
"interesting times", as they say) is finally behind us, and we're proud to
announce the release of Slackware 14.2.  The new release brings many updates
and modern tools, has switched from udev to eudev (no systemd), and adds
well over a hundred new packages to the system.  Thanks to the team, the
upstream developers, the dedicated Slackware community, and everyone else
who pitched in to help make this release a reality.

The ISOs are off to be replicated, a 6 CD-ROM 32-bit set and a dual-sided
32-bit/64-bit x86/x86_64 DVD.  Please consider supporting the Slackware
project by picking up a copy from store.slackware.com.  We're taking
pre-orders now, and offer a discount if you sign up for a subscription.

Have fun!  :-)

1 files changed, 0 insertions, 169 deletions

diff --git a/source/a/udev/udev.SlackBuild b/source/a/udev/udev.SlackBuild
deleted file mode 100755
index d39da262..00000000
--- a/source/a/udev/udev.SlackBuild
+++ /dev/null
@@ -1,169 +0,0 @@
-#!/bin/sh
-
-# Copyright 2006, 2008, 2009, 2010, 2011, 2012, 2013  Patrick J. Volkerding, Sebeka, MN, USA
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
-#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
-#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-VERSION=${VERSION:-$(echo udev-*.tar.* | cut -d - -f 2 | rev | cut -f 3- -d . | rev)}
-BUILD=${BUILD:-7}
-
-NUMJOBS=${NUMJOBS:-" -j7 "}
-
-# Automatically determine the architecture we're building on:
-if [ -z "$ARCH" ]; then
-  case "$( uname -m )" in
-    i?86) export ARCH=i486 ;;
-    arm*) export ARCH=arm ;;
-    # Unless $ARCH is already set, use uname -m for all other archs:
-       *) export ARCH=$( uname -m ) ;;
-  esac
-fi
-
-if [ "$ARCH" = "x86_64" ]; then
-  LIBDIRSUFFIX="64"
-else
-  LIBDIRSUFFIX=""
-fi
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-udev
-
-rm -rf $PKG
-mkdir -p $TMP $PKG/lib/udev
-cd $TMP
-rm -rf udev-$VERSION
-tar xvf $CWD/udev-$VERSION.tar.xz || exit 1
-cd udev-$VERSION || exit 1
-chown -R root:root .
-find . \
- \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
- -exec chmod 755 {} \; -o \
- \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
- -exec chmod 644 {} \;
-
-# Fix ata_id (remove with udev-186+)
-zcat $CWD/udev-ata_id-fixup-all-8-not-only-6-bytes-of-the-fw_rev.patch.gz | patch -p1 || exit 1
-
-# Fix 42-usb-hid-pm.rules (remove with udev-187+)
-zcat $CWD/fix-42-usb-hid-pm.rules.diff.gz | patch -p1 --verbose || exit 1
-
-# Fixup the rule generator for our use
-zcat $CWD/rule_generator.diff.gz | patch -p1 --verbose || exit 1
-
-# Patch 60-cdrom_id.rules to create a full set of symlinks.
-# This is needed for a hotplugged optical device since the generated
-# rules will not be used until the second time the device is plugged.
-zcat $CWD/60-cdrom_id.rules.diff.gz | patch -p1 --verbose || exit 1
-
-# static libudev is needed for lvm2
-# --enable-udev_acl was removed (will be part of future CK release)
-# --enable-floppy support was also disabled by default in 173
-# --enable-rule_generator was disabled by default in 175
-
-LDFLAGS="$LDFLAGS -lrt" \
-./configure \
-  --prefix=/usr \
-  --with-rootprefix=/ \
-  --libdir=/usr/lib${LIBDIRSUFFIX} \
-  --with-rootlibdir=/lib${LIBDIRSUFFIX} \
-  --with-firmware-path=/lib/firmware/updates:/lib/firmware \
-  --sysconfdir=/etc \
-  --bindir=/sbin \
-  --sbindir=/sbin \
-  --libexecdir=/lib \
-  --enable-introspection \
-  --mandir=/usr/man \
-  --docdir=/usr/doc/udev-$VERSION \
-  --enable-floppy \
-  --enable-static \
-  --enable-rule_generator \
-  --build=$ARCH-slackware-linux || exit 1
-
-make $NUMJOBS || make || exit 1
-make install DESTDIR=$PKG || exit 1
-
-find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
-  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
-
-# scsi_id is needed by multipath
-( cd $PKG/sbin ; ln -s ../lib/udev/scsi_id scsi_id )
-
-# Put udevd back in /sbin
-mv $PKG/lib/udev/udevd $PKG/sbin
-ln -s /sbin/udevd $PKG/lib/udev/udevd
-
-mkdir -p \
-  $PKG/run \
-  $PKG/{etc,lib}/modprobe.d \
-  $PKG/etc/rc.d \
-  $PKG/etc/udev/rules.d \
-  $PKG/lib/firmware
-
-# Yes, these will clobber existing config files.
-cp -a $CWD/config/udev.conf $PKG/etc/udev/udev.conf
-
-# Copy Slackware custom rules
-cp -a $CWD/config/rules.d/* $PKG/lib/udev/rules.d/
-
-# Now the init script and module-init-tools stuff
-cp -a $CWD/config/rc.d/rc.udev.new $PKG/etc/rc.d/rc.udev.new
-cp -a $CWD/config/modprobe.d/*.conf $PKG/lib/modprobe.d/
-cp -a $CWD/config/modprobe.d/README $PKG/etc/modprobe.d/
-
-chown -R root:root $PKG/etc $PKG/lib/modprobe.d
-find $PKG/etc $PKG/lib/modprobe.d -type f -exec chmod 644 {} \;
-find $PKG/etc -type d -exec chmod 755 {} \;
-chmod 0755 $PKG/etc/rc.d/rc.udev.new
-
-# Add extra device nodes to the package that udev doesn't make:
-tar xvf $CWD/udev-fixed-devices.tar.gz -C $PKG
-
-chown -R root:root $PKG/lib/udev
-chmod 0755 $PKG/lib/udev/*
-
-mkdir -p $PKG/usr/doc/udev-$VERSION
-cp -a \
-  COPYING* README* TODO \
-  $PKG/usr/doc/udev-$VERSION
-
-# Don't package the API docs:
-rm -rf $PKG/usr/share/gtk-doc ; rmdir $PKG/usr/share 2>/dev/null
-
-# Compress and fix manpage symlinks:
-if [ -d $PKG/usr/man ]; then
-  ( cd $PKG/usr/man
-    for manpagedir in $(find . -type d -name "man*") ; do
-      ( cd $manpagedir
-        for eachpage in $( find . -type l -maxdepth 1) ; do
-          ln -s $( readlink $eachpage ).gz $eachpage.gz
-          rm $eachpage
-        done
-        gzip -9 *.?
-      )
-    done
-  )
-fi
-
-mkdir -p $PKG/install
-zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
-cat $CWD/slack-desc > $PKG/install/slack-desc
-
-cd $PKG
-/sbin/makepkg -l y -c y $TMP/udev-$VERSION-$ARCH-$BUILD.txz