Wed Oct 28 20:19:37 UTC 202020201028201937

a/libblockdev-2.24-x86_64-1.txz:  Added.
  This is required by the new version of udisks2.
a/libbytesize-2.4-x86_64-1.txz:  Added.
  This is required by the new version of udisks2.
a/ndctl-70.1-x86_64-1.txz:  Added.
  This is required by libblockdev, which in turn is required by the new
  version of udisks2.
a/udisks2-2.9.1-x86_64-1.txz:  Upgraded.
  Thanks to Robby Workman for this update and the deps for it.
a/volume_key-0.3.12-x86_64-1.txz:  Added.
  This is required by the new version of udisks2.
ap/qpdf-10.0.2-x86_64-1.txz:  Upgraded.
n/openvpn-2.5.0-x86_64-1.txz:  Upgraded.
n/php-7.4.12-x86_64-1.txz:  Upgraded.

1 files changed, 60 insertions, 65 deletions

diff --git a/source/a/udisks2/udisks2.SlackBuild b/source/a/udisks2/udisks2.SlackBuild
index 78e61e73..8886f015 100755
--- a/source/a/udisks2/udisks2.SlackBuild
+++ b/source/a/udisks2/udisks2.SlackBuild
@@ -1,8 +1,7 @@
 #!/bin/bash
 
-# Slackware build script for udisks
-
-# Copyright 2010, 2011  Robby Workman, Northport, Alabama, USA
+# Copyright 2010, 2011, 2018  Robby Workman, Tuscaloosa, Alabama, USA
+# Copyright 2020  Patrick J. Volkerding, Sebeka, Minnesota, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -11,7 +10,7 @@
 # 1. Redistributions of this script must retain the above copyright
 #    notice, this list of conditions and the following disclaimer.
 #
-#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
 #  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
 #  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
 #  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
@@ -22,27 +21,22 @@
 #  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
 #  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
-# Modified 2012 by Eric Hameleers <alien at slackware.com> for ARM port.
-
 cd $(dirname $0) ; CWD=$(pwd)
 
 PKGNAM=udisks2
 SRCNAM=udisks
-VERSION=${VERSION:-$(echo $SRCNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-3}
-
-NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
+VERSION=${VERSION:-$(echo $SRCNAM-*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
 
 # Automatically determine the architecture we're building on:
-MARCH=$( uname -m )
 if [ -z "$ARCH" ]; then
-  case "$MARCH" in
-    i?86)    export ARCH=i586 ;;
-    armv7hl) export ARCH=$MARCH ;;
-    arm*)    export ARCH=arm ;;
+  case "$(uname -m)" in
+    i?86) ARCH=i586 ;;
+    arm*) readelf /usr/bin/file -A | egrep -q "Tag_CPU.*[4,5]" && ARCH=arm || ARCH=armv7hl ;;
     # Unless $ARCH is already set, use uname -m for all other archs:
-    *)       export ARCH=$MARCH ;;
+    *) ARCH=$(uname -m) ;;
   esac
+  export ARCH
 fi
 
 # If the variable PRINT_PACKAGE_NAME is set, then this script will report what
@@ -53,95 +47,96 @@ if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
   exit 0
 fi
 
+NUMJOBS=${NUMJOBS:-" -j $(expr $(nproc) + 1) "}
+
 if [ "$ARCH" = "i586" ]; then
   SLKCFLAGS="-O2 -march=i586 -mtune=i686"
   LIBDIRSUFFIX=""
 elif [ "$ARCH" = "i686" ]; then
-  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  SLKCFLAGS="-O2 -march=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
   LIBDIRSUFFIX=""
 elif [ "$ARCH" = "x86_64" ]; then
   SLKCFLAGS="-O2 -fPIC"
   LIBDIRSUFFIX="64"
 elif [ "$ARCH" = "armv7hl" ]; then
-  SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16"
+  SLKCFLAGS="-O3 -march=armv7-a -mfpu=vfpv3-d16"
   LIBDIRSUFFIX=""
 else
   SLKCFLAGS="-O2"
   LIBDIRSUFFIX=""
 fi
 
-case "$ARCH" in
-    arm*) TARGET=$ARCH-slackware-linux-gnueabi ;;
-    *)    TARGET=$ARCH-slackware-linux ;;
-esac
-
 TMP=${TMP:-/tmp}
 PKG=$TMP/package-$PKGNAM
 
 rm -rf $PKG
 mkdir -p $TMP $PKG
+
 cd $TMP
 rm -rf $SRCNAM-$VERSION
-tar xvf $CWD/$SRCNAM-$VERSION.tar.xz || exit 1
+tar xvf $CWD/$SRCNAM-$VERSION.tar.?z || exit 1
 cd $SRCNAM-$VERSION || exit 1
+
 chown -R root:root .
 find . \
- \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
- -exec chmod 755 {} \+ -o \
- \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
- -exec chmod 644 {} \+
-
-# Temporarily omit LVM2 support since it uses a removed API. We'll upgrade
-# udisks2 soon (and add newly required deps) to handle this, but since it
-# was broken after the LVM2 upgrade recently and nobody noticed yet it's
-# probably OK for it to be like this for a little while.
-if [ "$VERSION" = "2.6.5" ]; then
-  LVM2_SUPPORT="--disable-lvm2"
-else
-  LVM2_SUPPORT="--enable-lvm2"
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \+ -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \+
+
+# Configure, build, and install:
+if [ ! -r configure ]; then
+  if [ -x ./autogen.sh ]; then
+    NOCONFIGURE=1 ./autogen.sh
+  else
+    autoreconf -vif
+  fi
 fi
-
 CFLAGS="$SLKCFLAGS" \
 CXXFLAGS="$SLKCFLAGS" \
+# --enable-zram (removed since it appears to require systemd... but perhaps there's a way around that)
 ./configure \
   --prefix=/usr \
   --libdir=/usr/lib${LIBDIRSUFFIX} \
   --sysconfdir=/etc \
   --localstatedir=/var \
-  --disable-static \
-  --mandir=/usr/man \
   --docdir=/usr/doc/$PKGNAM-$VERSION \
-  $LVM2_SUPPORT \
-  --build=$TARGET || exit 1
-
+  --mandir=/usr/man \
+  --disable-static \
+  --enable-lvm2 \
+  --enable-btrfs \
+  --enable-bcache \
+  --build=$ARCH-slackware-linux || exit 1
 make $NUMJOBS || make || exit 1
 make install DESTDIR=$PKG || exit 1
 
 # Don't ship .la files:
-rm -f $PKG/usr/lib${LIBDIRSUFFIX}/*.la
-
-find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
-  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
-
-# Compress and link manpages, if any:
-if [ -d $PKG/usr/man ]; then
-  ( cd $PKG/usr/man
-    for manpagedir in $(find . -type d -name "man*") ; do
-      ( cd $manpagedir
-        for eachpage in $( find . -type l -maxdepth 1) ; do
-          ln -s $( readlink $eachpage ).gz $eachpage.gz
-          rm $eachpage
-        done
-        gzip -9 *.?
-      )
-    done
-  )
-fi
+rm -f $PKG/{,usr/}lib${LIBDIRSUFFIX}/*.la
+
+# Don't overwrite config file, but leave mount_options.conf.example alone
+mv $PKG/etc/udisks2/udisks2.conf $PKG/etc/udisks2/udisks2.conf.new
+
+# Strip binaries:
+find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
 
-mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
+# Compress manual pages:
+find $PKG/usr/man -type f -exec gzip -9 {} \+
+for i in $( find $PKG/usr/man -type l ) ; do
+  ln -s $( readlink $i ).gz $i.gz
+  rm $i
+done
+
+# Add a documentation directory:
+mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION
 cp -a \
-  AUTHORS COPYING* HACKING INSTALL NEWS README* \
-  $PKG/usr/doc/$PKGNAM-$VERSION
+  AUTHORS* ChangeLog CHANGES COPYING* HACKING* LICENSE* NEWS* README* THANKS* TODO* \
+  $PKG/usr/doc/${PKGNAM}-$VERSION
+if [ -d $PKG/usr/share/gtk-doc/html/$PKGNAM ]; then
+  ln -s /usr/share/gtk-doc/html/$PKGNAM $PKG/usr/doc/$PKGNAM-$VERSION/html
+fi
 
 # If there's a ChangeLog, installing at least part of the recent history
 # is useful, but don't let it get totally out of control: