Wed Oct 28 20:19:37 UTC 202020201028201937

a/libblockdev-2.24-x86_64-1.txz:  Added.
  This is required by the new version of udisks2.
a/libbytesize-2.4-x86_64-1.txz:  Added.
  This is required by the new version of udisks2.
a/ndctl-70.1-x86_64-1.txz:  Added.
  This is required by libblockdev, which in turn is required by the new
  version of udisks2.
a/udisks2-2.9.1-x86_64-1.txz:  Upgraded.
  Thanks to Robby Workman for this update and the deps for it.
a/volume_key-0.3.12-x86_64-1.txz:  Added.
  This is required by the new version of udisks2.
ap/qpdf-10.0.2-x86_64-1.txz:  Upgraded.
n/openvpn-2.5.0-x86_64-1.txz:  Upgraded.
n/php-7.4.12-x86_64-1.txz:  Upgraded.

17 files changed, 785 insertions, 66 deletions

diff --git a/source/a/libblockdev/doinst.sh b/source/a/libblockdev/doinst.sh
new file mode 100644
index 00000000..09fe04bb
--- /dev/null
+++ b/source/a/libblockdev/doinst.sh
@@ -0,0 +1,15 @@
+config() {
+  NEW="$1"
+  OLD="$(dirname $NEW)/$(basename $NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r $OLD ]; then
+    mv $NEW $OLD
+  elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then
+    # toss the redundant copy
+    rm $NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+config etc/libblockdev/conf.d/00-default.cfg.new
+config etc/libblockdev/conf.d/10-lvm-dbus.cfg.new
diff --git a/source/a/libblockdev/libblockdev.SlackBuild b/source/a/libblockdev/libblockdev.SlackBuild
new file mode 100755
index 00000000..5f815f1d
--- /dev/null
+++ b/source/a/libblockdev/libblockdev.SlackBuild
@@ -0,0 +1,151 @@
+#!/bin/bash
+
+# Copyright 2017-2019  Robby Workman, Tuscaloosa, Alabama, USA
+# Copyright 2020  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+cd $(dirname $0) ; CWD=$(pwd)
+
+PKGNAM=libblockdev
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+  case "$(uname -m)" in
+    i?86) ARCH=i586 ;;
+    arm*) readelf /usr/bin/file -A | egrep -q "Tag_CPU.*[4,5]" && ARCH=arm || ARCH=armv7hl ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *) ARCH=$(uname -m) ;;
+  esac
+  export ARCH
+fi
+
+# If the variable PRINT_PACKAGE_NAME is set, then this script will report what
+# the name of the created package would be, and then exit. This information
+# could be useful to other scripts.
+if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
+  echo "$PKGNAM-$VERSION-$ARCH-$BUILD.txz"
+  exit 0
+fi
+
+NUMJOBS=${NUMJOBS:-" -j $(expr $(nproc) + 1) "}
+
+if [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+elif [ "$ARCH" = "armv7hl" ]; then
+  SLKCFLAGS="-O3 -march=armv7-a -mfpu=vfpv3-d16"
+  LIBDIRSUFFIX=""
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z || exit 1
+cd $PKGNAM-$VERSION || exit 1
+
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \+ -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \+
+
+# Configure, build, and install:
+if [ ! -r configure ]; then
+  if [ -x ./autogen.sh ]; then
+    NOCONFIGURE=1 ./autogen.sh
+  else
+    autoreconf -vif
+  fi
+fi
+# --without-dm because no support for old dm_raid here
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --localstatedir=/var \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --mandir=/usr/man \
+  --infodir=/usr/info \
+  --disable-static \
+  --without-dm \
+  --build=$ARCH-slackware-linux || exit 1
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+# Don't ship .la files:
+rm -f $PKG/{,usr/}lib${LIBDIRSUFFIX}/*.la
+
+mv $PKG/etc/libblockdev/conf.d/00-default.cfg \
+   $PKG/etc/libblockdev/conf.d/00-default.cfg.new
+mv $PKG/etc/libblockdev/conf.d/10-lvm-dbus.cfg \
+   $PKG/etc/libblockdev/conf.d/10-lvm-dbus.cfg.new
+
+# Strip binaries:
+find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+
+# Compress manual pages:
+find $PKG/usr/man -type f -exec gzip -9 {} \+
+for i in $( find $PKG/usr/man -type l ) ; do
+  ln -s $( readlink $i ).gz $i.gz
+  rm $i
+done
+
+# Add a documentation directory:
+mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION
+cp -a \
+  AUTHORS* ChangeLog CHANGES COPYING* LICENSE* NEWS* README* THANKS* TODO* \
+  $PKG/usr/doc/${PKGNAM}-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
diff --git a/source/a/libblockdev/libblockdev.url b/source/a/libblockdev/libblockdev.url
new file mode 100644
index 00000000..9c4cf696
--- /dev/null
+++ b/source/a/libblockdev/libblockdev.url
@@ -0,0 +1 @@
+https://github.com/rhinstaller/libblockdev
diff --git a/source/a/libblockdev/slack-desc b/source/a/libblockdev/slack-desc
new file mode 100644
index 00000000..df0fcbde
--- /dev/null
+++ b/source/a/libblockdev/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.
+# Line up the first '|' above the ':' following the base package name, and
+# the '|' on the right side marks the last column you can put a character in.
+# You must make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':' except on otherwise blank lines.
+
+           |-----handy-ruler------------------------------------------------------|
+libblockdev: libblockdev (library for manipulating block devices)
+libblockdev:
+libblockdev: libblockdev is a library for manipulating block devices.
+libblockdev: 
+libblockdev: Homepage: https://github.com/rhinstaller/libblockdev
+libblockdev:
+libblockdev:
+libblockdev:
+libblockdev:
+libblockdev:
+libblockdev:
diff --git a/source/a/libbytesize/libbytesize.SlackBuild b/source/a/libbytesize/libbytesize.SlackBuild
new file mode 100755
index 00000000..21765d4e
--- /dev/null
+++ b/source/a/libbytesize/libbytesize.SlackBuild
@@ -0,0 +1,146 @@
+#!/bin/bash
+
+# Copyright 2020  Robby Workman, Tuscaloosa, Alabama, USA
+# Copyright 2020  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+cd $(dirname $0) ; CWD=$(pwd)
+
+PKGNAM=libbytesize
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+  case "$(uname -m)" in
+    i?86) ARCH=i586 ;;
+    arm*) readelf /usr/bin/file -A | egrep -q "Tag_CPU.*[4,5]" && ARCH=arm || ARCH=armv7hl ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *) ARCH=$(uname -m) ;;
+  esac
+  export ARCH
+fi
+
+# If the variable PRINT_PACKAGE_NAME is set, then this script will report what
+# the name of the created package would be, and then exit. This information
+# could be useful to other scripts.
+if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
+  echo "$PKGNAM-$VERSION-$ARCH-$BUILD.txz"
+  exit 0
+fi
+
+NUMJOBS=${NUMJOBS:-" -j $(expr $(nproc) + 1) "}
+
+if [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+elif [ "$ARCH" = "armv7hl" ]; then
+  SLKCFLAGS="-O3 -march=armv7-a -mfpu=vfpv3-d16"
+  LIBDIRSUFFIX=""
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z || exit 1
+cd $PKGNAM-$VERSION || exit 1
+
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \+ -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \+
+
+# Configure, build, and install:
+if [ ! -r configure ]; then
+  if [ -x ./autogen.sh ]; then
+    NOCONFIGURE=1 ./autogen.sh
+  else
+    autoreconf -vif
+  fi
+fi
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --localstatedir=/var \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --mandir=/usr/man \
+  --infodir=/usr/info \
+  --disable-static \
+  --build=$ARCH-slackware-linux || exit 1
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+# Don't ship .la files:
+rm -f $PKG/{,usr/}lib${LIBDIRSUFFIX}/*.la
+
+# Strip binaries:
+find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+
+# Compress manual pages:
+find $PKG/usr/man -type f -exec gzip -9 {} \+
+for i in $( find $PKG/usr/man -type l ) ; do
+  ln -s $( readlink $i ).gz $i.gz
+  rm $i
+done
+
+# Add a documentation directory:
+mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION
+cp -a \
+  AUTHORS* ChangeLog CHANGES COPYING* HACKING* LICENSE* NEWS* README* THANKS* TODO* \
+  $PKG/usr/doc/${PKGNAM}-$VERSION
+if [ -d $PKG/usr/share/gtk-doc/html/$PKGNAM ]; then
+  ln -s /usr/share/gtk-doc/html/$PKGNAM $PKG/usr/doc/$PKGNAM-$VERSION/html
+fi
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
diff --git a/source/a/libbytesize/libbytesize.url b/source/a/libbytesize/libbytesize.url
new file mode 100644
index 00000000..0f41f641
--- /dev/null
+++ b/source/a/libbytesize/libbytesize.url
@@ -0,0 +1 @@
+https://github.com/rhinstaller/libbytesize
diff --git a/source/a/libbytesize/slack-desc b/source/a/libbytesize/slack-desc
new file mode 100644
index 00000000..f5f84522
--- /dev/null
+++ b/source/a/libbytesize/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.
+# Line up the first '|' above the ':' following the base package name, and
+# the '|' on the right side marks the last column you can put a character in.
+# You must make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':' except on otherwise blank lines.
+
+           |-----handy-ruler------------------------------------------------------|
+libbytesize: libbytesize (library for working with big sizes in bytes)
+libbytesize:
+libbytesize: libbytesize is a library providing a C class for working with
+libbytesize: arbitrary sizes in bytes.
+libbytesize:
+libbytesize: Homepage: https://github.com/rhinstaller/libbytesize
+libbytesize:
+libbytesize:
+libbytesize:
+libbytesize:
+libbytesize:
diff --git a/source/a/ndctl/doinst.sh b/source/a/ndctl/doinst.sh
new file mode 100644
index 00000000..2fe7500e
--- /dev/null
+++ b/source/a/ndctl/doinst.sh
@@ -0,0 +1,14 @@
+config() {
+  NEW="$1"
+  OLD="$(dirname $NEW)/$(basename $NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r $OLD ]; then
+    mv $NEW $OLD
+  elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then
+    # toss the redundant copy
+    rm $NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+config etc/ndctl/monitor.conf.new
diff --git a/source/a/ndctl/ndctl.SlackBuild b/source/a/ndctl/ndctl.SlackBuild
new file mode 100755
index 00000000..65ba4ab8
--- /dev/null
+++ b/source/a/ndctl/ndctl.SlackBuild
@@ -0,0 +1,159 @@
+#!/bin/bash
+
+# Copyright 2020  Robby Workman, Tuscaloosa, Alabama, USA
+# Copyright 2020  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+cd $(dirname $0) ; CWD=$(pwd)
+
+PKGNAM=ndctl
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+  case "$(uname -m)" in
+    i?86) ARCH=i586 ;;
+    arm*) readelf /usr/bin/file -A | egrep -q "Tag_CPU.*[4,5]" && ARCH=arm || ARCH=armv7hl ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *) ARCH=$(uname -m) ;;
+  esac
+  export ARCH
+fi
+
+# If the variable PRINT_PACKAGE_NAME is set, then this script will report what
+# the name of the created package would be, and then exit. This information
+# could be useful to other scripts.
+if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
+  echo "$PKGNAM-$VERSION-$ARCH-$BUILD.txz"
+  exit 0
+fi
+
+NUMJOBS=${NUMJOBS:-" -j $(expr $(nproc) + 1) "}
+
+if [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+elif [ "$ARCH" = "armv7hl" ]; then
+  SLKCFLAGS="-O3 -march=armv7-a -mfpu=vfpv3-d16"
+  LIBDIRSUFFIX=""
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z || exit 1
+cd $PKGNAM-$VERSION || exit 1
+
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \+ -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \+
+
+# Configure, build, and install:
+if [ ! -r configure ]; then
+  if [ -x ./autogen.sh ]; then
+    NOCONFIGURE=1 ./autogen.sh
+  else
+    autoreconf -vif
+  fi
+fi
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --localstatedir=/var \
+  --disable-static \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --without-systemd \
+  --disable-asciidoctor \
+  --with-bash=no \
+  --build=$ARCH-slackware-linux || exit 1
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+# Don't ship .la files:
+rm -f $PKG/{,usr/}lib${LIBDIRSUFFIX}/*.la
+
+mkdir $PKG/lib
+mv $PKG/etc/modprobe.d $PKG/lib
+
+mv $PKG/etc/ndctl/monitor.conf $PKG/etc/ndctl/monitor.conf.new
+
+# We ship bash-completion in /extra, so this won't build using --with-bash=yes
+# since it isn't available on a default installation. No matter, we'll just
+# install the completion file manually:
+mkdir -p $PKG/usr/share/bash-completion/completions
+cp -a contrib/ndctl $PKG/usr/share/bash-completion/completions
+chown root:root $PKG/usr/share/bash-completion/completions
+chmod 644 $PKG/usr/share/bash-completion/completions
+
+# Strip binaries:
+find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+
+# Compress manual pages:
+find $PKG/usr/man -type f -exec gzip -9 {} \+
+for i in $( find $PKG/usr/man -type l ) ; do
+  ln -s $( readlink $i ).gz $i.gz
+  rm $i
+done
+
+# Add a documentation directory:
+mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION
+cp -a \
+  AUTHORS* ChangeLog CHANGES COPYING* HACKING* LICENSE* NEWS* README* THANKS* TODO* \
+  $PKG/usr/doc/${PKGNAM}-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
diff --git a/source/a/ndctl/ndctl.url b/source/a/ndctl/ndctl.url
new file mode 100644
index 00000000..ec98c90f
--- /dev/null
+++ b/source/a/ndctl/ndctl.url
@@ -0,0 +1 @@
+https://github.com/pmem/ndctl/releases
diff --git a/source/a/ndctl/slack-desc b/source/a/ndctl/slack-desc
new file mode 100644
index 00000000..28139bef
--- /dev/null
+++ b/source/a/ndctl/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.
+# Line up the first '|' above the ':' following the base package name, and
+# the '|' on the right side marks the last column you can put a character in.
+# You must make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':' except on otherwise blank lines.
+
+     |-----handy-ruler------------------------------------------------------|
+ndctl: ndctl (non-volatile memory device library)
+ndctl:
+ndctl: ndctl is a utility library for managing the LIBNVDIMM (non-volatile 
+ndctl: memory device) subsystem in the Linux kernel.
+ndctl:
+ndctl: Homepage: https://github.com/pmem/ndctl
+ndctl:
+ndctl:
+ndctl:
+ndctl:
+ndctl:
diff --git a/source/a/udisks2/doinst.sh b/source/a/udisks2/doinst.sh
index c186599a..bec03519 100644
--- a/source/a/udisks2/doinst.sh
+++ b/source/a/udisks2/doinst.sh
@@ -1,3 +1,18 @@
+config() {
+  NEW="$1"
+  OLD="$(dirname $NEW)/$(basename $NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r $OLD ]; then
+    mv $NEW $OLD
+  elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then
+    # toss the redundant copy
+    rm $NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+config etc/udisks2/udisks2.conf.new
+
 # udisks2 is stupid about testing files before using them.  If /etc/crypttab
 # does not exist, it will fill the log with "errors" as it tries to open the
 # nonexistent file.  There's really no reason that a system without encrypted
@@ -9,4 +24,3 @@ if [ ! -r etc/crypttab ]; then
   # echo "HEY, EVERYONE SHOULD HAVE A CRYPTTAB!!!"  (just kidding)
   touch etc/crypttab
 fi
-
diff --git a/source/a/udisks2/udisks2.SlackBuild b/source/a/udisks2/udisks2.SlackBuild
index 78e61e73..8886f015 100755
--- a/source/a/udisks2/udisks2.SlackBuild
+++ b/source/a/udisks2/udisks2.SlackBuild
@@ -1,8 +1,7 @@
 #!/bin/bash
 
-# Slackware build script for udisks
-
-# Copyright 2010, 2011  Robby Workman, Northport, Alabama, USA
+# Copyright 2010, 2011, 2018  Robby Workman, Tuscaloosa, Alabama, USA
+# Copyright 2020  Patrick J. Volkerding, Sebeka, Minnesota, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -11,7 +10,7 @@
 # 1. Redistributions of this script must retain the above copyright
 #    notice, this list of conditions and the following disclaimer.
 #
-#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
 #  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
 #  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
 #  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
@@ -22,27 +21,22 @@
 #  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
 #  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
-# Modified 2012 by Eric Hameleers <alien at slackware.com> for ARM port.
-
 cd $(dirname $0) ; CWD=$(pwd)
 
 PKGNAM=udisks2
 SRCNAM=udisks
-VERSION=${VERSION:-$(echo $SRCNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-3}
-
-NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
+VERSION=${VERSION:-$(echo $SRCNAM-*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
 
 # Automatically determine the architecture we're building on:
-MARCH=$( uname -m )
 if [ -z "$ARCH" ]; then
-  case "$MARCH" in
-    i?86)    export ARCH=i586 ;;
-    armv7hl) export ARCH=$MARCH ;;
-    arm*)    export ARCH=arm ;;
+  case "$(uname -m)" in
+    i?86) ARCH=i586 ;;
+    arm*) readelf /usr/bin/file -A | egrep -q "Tag_CPU.*[4,5]" && ARCH=arm || ARCH=armv7hl ;;
     # Unless $ARCH is already set, use uname -m for all other archs:
-    *)       export ARCH=$MARCH ;;
+    *) ARCH=$(uname -m) ;;
   esac
+  export ARCH
 fi
 
 # If the variable PRINT_PACKAGE_NAME is set, then this script will report what
@@ -53,95 +47,96 @@ if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
   exit 0
 fi
 
+NUMJOBS=${NUMJOBS:-" -j $(expr $(nproc) + 1) "}
+
 if [ "$ARCH" = "i586" ]; then
   SLKCFLAGS="-O2 -march=i586 -mtune=i686"
   LIBDIRSUFFIX=""
 elif [ "$ARCH" = "i686" ]; then
-  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  SLKCFLAGS="-O2 -march=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
   LIBDIRSUFFIX=""
 elif [ "$ARCH" = "x86_64" ]; then
   SLKCFLAGS="-O2 -fPIC"
   LIBDIRSUFFIX="64"
 elif [ "$ARCH" = "armv7hl" ]; then
-  SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16"
+  SLKCFLAGS="-O3 -march=armv7-a -mfpu=vfpv3-d16"
   LIBDIRSUFFIX=""
 else
   SLKCFLAGS="-O2"
   LIBDIRSUFFIX=""
 fi
 
-case "$ARCH" in
-    arm*) TARGET=$ARCH-slackware-linux-gnueabi ;;
-    *)    TARGET=$ARCH-slackware-linux ;;
-esac
-
 TMP=${TMP:-/tmp}
 PKG=$TMP/package-$PKGNAM
 
 rm -rf $PKG
 mkdir -p $TMP $PKG
+
 cd $TMP
 rm -rf $SRCNAM-$VERSION
-tar xvf $CWD/$SRCNAM-$VERSION.tar.xz || exit 1
+tar xvf $CWD/$SRCNAM-$VERSION.tar.?z || exit 1
 cd $SRCNAM-$VERSION || exit 1
+
 chown -R root:root .
 find . \
- \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
- -exec chmod 755 {} \+ -o \
- \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
- -exec chmod 644 {} \+
-
-# Temporarily omit LVM2 support since it uses a removed API. We'll upgrade
-# udisks2 soon (and add newly required deps) to handle this, but since it
-# was broken after the LVM2 upgrade recently and nobody noticed yet it's
-# probably OK for it to be like this for a little while.
-if [ "$VERSION" = "2.6.5" ]; then
-  LVM2_SUPPORT="--disable-lvm2"
-else
-  LVM2_SUPPORT="--enable-lvm2"
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \+ -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \+
+
+# Configure, build, and install:
+if [ ! -r configure ]; then
+  if [ -x ./autogen.sh ]; then
+    NOCONFIGURE=1 ./autogen.sh
+  else
+    autoreconf -vif
+  fi
 fi
-
 CFLAGS="$SLKCFLAGS" \
 CXXFLAGS="$SLKCFLAGS" \
+# --enable-zram (removed since it appears to require systemd... but perhaps there's a way around that)
 ./configure \
   --prefix=/usr \
   --libdir=/usr/lib${LIBDIRSUFFIX} \
   --sysconfdir=/etc \
   --localstatedir=/var \
-  --disable-static \
-  --mandir=/usr/man \
   --docdir=/usr/doc/$PKGNAM-$VERSION \
-  $LVM2_SUPPORT \
-  --build=$TARGET || exit 1
-
+  --mandir=/usr/man \
+  --disable-static \
+  --enable-lvm2 \
+  --enable-btrfs \
+  --enable-bcache \
+  --build=$ARCH-slackware-linux || exit 1
 make $NUMJOBS || make || exit 1
 make install DESTDIR=$PKG || exit 1
 
 # Don't ship .la files:
-rm -f $PKG/usr/lib${LIBDIRSUFFIX}/*.la
-
-find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
-  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
-
-# Compress and link manpages, if any:
-if [ -d $PKG/usr/man ]; then
-  ( cd $PKG/usr/man
-    for manpagedir in $(find . -type d -name "man*") ; do
-      ( cd $manpagedir
-        for eachpage in $( find . -type l -maxdepth 1) ; do
-          ln -s $( readlink $eachpage ).gz $eachpage.gz
-          rm $eachpage
-        done
-        gzip -9 *.?
-      )
-    done
-  )
-fi
+rm -f $PKG/{,usr/}lib${LIBDIRSUFFIX}/*.la
+
+# Don't overwrite config file, but leave mount_options.conf.example alone
+mv $PKG/etc/udisks2/udisks2.conf $PKG/etc/udisks2/udisks2.conf.new
+
+# Strip binaries:
+find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
 
-mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
+# Compress manual pages:
+find $PKG/usr/man -type f -exec gzip -9 {} \+
+for i in $( find $PKG/usr/man -type l ) ; do
+  ln -s $( readlink $i ).gz $i.gz
+  rm $i
+done
+
+# Add a documentation directory:
+mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION
 cp -a \
-  AUTHORS COPYING* HACKING INSTALL NEWS README* \
-  $PKG/usr/doc/$PKGNAM-$VERSION
+  AUTHORS* ChangeLog CHANGES COPYING* HACKING* LICENSE* NEWS* README* THANKS* TODO* \
+  $PKG/usr/doc/${PKGNAM}-$VERSION
+if [ -d $PKG/usr/share/gtk-doc/html/$PKGNAM ]; then
+  ln -s /usr/share/gtk-doc/html/$PKGNAM $PKG/usr/doc/$PKGNAM-$VERSION/html
+fi
 
 # If there's a ChangeLog, installing at least part of the recent history
 # is useful, but don't let it get totally out of control:
diff --git a/source/a/udisks2/udisks2.url b/source/a/udisks2/udisks2.url
new file mode 100644
index 00000000..e2d993ee
--- /dev/null
+++ b/source/a/udisks2/udisks2.url
@@ -0,0 +1 @@
+https://github.com/storaged-project/udisks/releases
diff --git a/source/a/volume_key/slack-desc b/source/a/volume_key/slack-desc
new file mode 100644
index 00000000..98d6b333
--- /dev/null
+++ b/source/a/volume_key/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.
+# Line up the first '|' above the ':' following the base package name, and
+# the '|' on the right side marks the last column you can put a character in.
+# You must make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':' except on otherwise blank lines.
+
+          |-----handy-ruler------------------------------------------------------|
+volume_key: volume_key (manipulate storage keys)
+volume_key:
+volume_key: The volume_key package provides a libvolume_key, a library for
+volume_key: manipulating storage volume encryption keys and storing them
+volume_key: separately from volumes, and an associated command-line tool named
+volume_key: volume_key.
+volume_key:
+volume_key: Homepage: https://pagure.io/volume_key/
+volume_key:
+volume_key:
+volume_key:
diff --git a/source/a/volume_key/volume_key.SlackBuild b/source/a/volume_key/volume_key.SlackBuild
new file mode 100755
index 00000000..745db104
--- /dev/null
+++ b/source/a/volume_key/volume_key.SlackBuild
@@ -0,0 +1,143 @@
+#!/bin/bash
+
+# Copyright 2017-2019  Robby Workman, Tuscaloosa, Alabama, USA
+# Copyright 2020  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+cd $(dirname $0) ; CWD=$(pwd)
+
+PKGNAM=volume_key
+VERSION=${VERSION:-$(echo $PKGNAM-$PKGNAM-*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+  case "$(uname -m)" in
+    i?86) ARCH=i586 ;;
+    arm*) readelf /usr/bin/file -A | egrep -q "Tag_CPU.*[4,5]" && ARCH=arm || ARCH=armv7hl ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *) ARCH=$(uname -m) ;;
+  esac
+  export ARCH
+fi
+
+# If the variable PRINT_PACKAGE_NAME is set, then this script will report what
+# the name of the created package would be, and then exit. This information
+# could be useful to other scripts.
+if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
+  echo "$PKGNAM-$VERSION-$ARCH-$BUILD.txz"
+  exit 0
+fi
+
+NUMJOBS=${NUMJOBS:-" -j $(expr $(nproc) + 1) "}
+
+if [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+elif [ "$ARCH" = "armv7hl" ]; then
+  SLKCFLAGS="-O3 -march=armv7-a -mfpu=vfpv3-d16"
+  LIBDIRSUFFIX=""
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+cd $TMP
+rm -rf $PKGNAM-$PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$PKGNAM-$VERSION.tar.?z || exit 1
+cd $PKGNAM-$PKGNAM-$VERSION || exit 1
+
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \+ -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \+
+
+# Configure, build, and install:
+if [ ! -r configure ]; then
+  if [ -x ./autogen.sh ]; then
+    NOCONFIGURE=1 ./autogen.sh
+  else
+    autoreconf -vif
+  fi
+fi
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --localstatedir=/var \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --mandir=/usr/man \
+  --infodir=/usr/info \
+  --disable-static \
+  --build=$ARCH-slackware-linux || exit 1
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+# Don't ship .la files:
+rm -f $PKG/{,usr/}lib${LIBDIRSUFFIX}/*.la
+
+# Strip binaries:
+find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+
+# Compress manual pages:
+find $PKG/usr/man -type f -exec gzip -9 {} \+
+for i in $( find $PKG/usr/man -type l ) ; do
+  ln -s $( readlink $i ).gz $i.gz
+  rm $i
+done
+
+# Add a documentation directory:
+mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION
+cp -a \
+  AUTHORS* ChangeLog CHANGES COPYING* LICENSE* NEWS* README* THANKS* TODO* \
+  $PKG/usr/doc/${PKGNAM}-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
diff --git a/source/a/volume_key/volume_key.url b/source/a/volume_key/volume_key.url
new file mode 100644
index 00000000..77431064
--- /dev/null
+++ b/source/a/volume_key/volume_key.url
@@ -0,0 +1,2 @@
+# To see the latest release:
+https://pagure.io/volume_key/releases