Slackware 13.0slackware-13.0

Wed Aug 26 10:00:38 CDT 2009
Slackware 13.0 x86_64 is released as stable!  Thanks to everyone who
helped make this release possible -- see the RELEASE_NOTES for the
credits.  The ISOs are off to the replicator.  This time it will be a
6 CD-ROM 32-bit set and a dual-sided 32-bit/64-bit x86/x86_64 DVD.
We're taking pre-orders now at store.slackware.com.  Please consider
picking up a copy to help support the project.  Once again, thanks to
the entire Slackware community for all the help testing and fixing
things and offering suggestions during this development cycle.
As always, have fun and enjoy!  -P.

4 files changed, 272 insertions, 0 deletions

diff --git a/source/ap/alsa-utils/alsa-utils.SlackBuild b/source/ap/alsa-utils/alsa-utils.SlackBuild
new file mode 100755
index 00000000..c918ba52
--- /dev/null
+++ b/source/ap/alsa-utils/alsa-utils.SlackBuild
@@ -0,0 +1,106 @@
+#!/bin/sh
+
+# Copyright 2008, 2009  Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+VERSION=1.0.18
+ARCH=${ARCH:-x86_64}
+BUILD=${BUILD:-2}
+
+NUMJOBS=${NUMJOBS:-" -j7 "}
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-alsa-utils
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+cd $TMP
+rm -rf alsa-utils-$VERSION
+tar xvf $CWD/alsa-utils-$VERSION.tar.bz2 || exit 1
+cd alsa-utils-$VERSION || exit 1
+zcat $CWD/alsa-utils.alsaconf.diff.gz | patch -p1 --verbose --backup --suffix=.orig || exit
+
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \; -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \;
+
+CFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --mandir=/usr/man \
+  --sysconfdir=/etc \
+  --build=$ARCH-slackware-linux
+
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG
+mkdir -p $PKG/etc/rc.d
+zcat $CWD/rc.alsa.gz > $PKG/etc/rc.d/rc.alsa
+chmod 755 $PKG/etc/rc.d/rc.alsa
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" \
+  | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+
+# Compress and if needed symlink the man pages:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+mkdir -p $PKG/usr/doc/alsa-utils-$VERSION
+cp -a \
+  COPYING ChangeLog INSTALL TODO \
+  seq/aconnect/README.aconnect \
+  seq/aseqnet/README.aseqnet \
+  $PKG/usr/doc/alsa-utils-$VERSION
+cp -a alsamixer/README $PKG/usr/doc/alsa-utils-$VERSION/README.alsamixer
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/alsa-utils-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/source/ap/alsa-utils/alsa-utils.alsaconf.diff b/source/ap/alsa-utils/alsa-utils.alsaconf.diff
new file mode 100644
index 00000000..c20bf72e
--- /dev/null
+++ b/source/ap/alsa-utils/alsa-utils.alsaconf.diff
@@ -0,0 +1,54 @@
+--- ./alsaconf/alsaconf.in.orig	2007-05-31 03:07:21.000000000 -0500
++++ ./alsaconf/alsaconf.in	2007-06-05 19:01:03.000000000 -0500
+@@ -50,7 +50,9 @@
+ }
+ 
+ # Check for GNU/Linux distributions
+-if [ -f /etc/SuSE-release ]; then
++if [ -f /etc/slackware-version ]; then
++  distribution="slackware"
++elif [ -f /etc/SuSE-release ]; then
+   distribution="suse"
+   suse_version=$(grep 'VERSION = ' /etc/SuSE-release | sed -e s/'VERSION = '//)
+ elif [ -f /etc/UnitedLinux-release ]; then
+@@ -490,6 +492,8 @@
+ 
+ if [ "$distribution" = "debian" ]; then
+     rcalsasound=/etc/init.d/alsa
++elif [ -x /etc/rc.d/rc.alsa ]; then
++    rcalsasound=/etc/rc.d/rc.alsa
+ elif [ -x /etc/init.d/alsasound ]; then
+     rcalsasound=/etc/init.d/alsasound
+ elif [ -x /usr/sbin/rcalsasound ]; then
+--- ./alsaconf/alsaconf.8.orig	2007-05-31 03:07:21.000000000 -0500
++++ ./alsaconf/alsaconf.8	2007-06-05 19:01:03.000000000 -0500
+@@ -16,8 +16,6 @@
+ This manual page documents briefly the
+ .B alsaconf
+ command.
+-This manual page was written for the Debian distribution because the
+-original program does not have a manual page.
+ .PP
+ \fBAlsaconf\fP is a simple shell script which tries to detect the sound cards
+ on your system and writes a suitable configuration file for ALSA. It will try
+@@ -74,13 +72,6 @@
+ Set the uid for the ALSA devices (default = 0).
+ This option is obsolete in the recent ALSA version.
+ 
+-.SH DEBIAN SPECIFIC
+-In Debian, the default gid of the device files is 29 (corresponding to the
+-audio group) and the default device mode is 0660.
+-
+-For the ALSA base package, see also
+-.I /usr/share/doc/alsa\-base/
+-
+ .SH SEE ALSO
+ \fB
+ alsamixer(1),
+@@ -98,5 +89,4 @@
+ Bernd Kaindl <bk@suse.de> and
+ Jan Ondrej (SAL) <ondrejj@salstar.sk>
+ 
+-This manual page was written by Jordi Mallach <jordi@debian.org>,
+-for the Debian system (but may be used by others).
++This manual page was written by Jordi Mallach <jordi@debian.org>.
diff --git a/source/ap/alsa-utils/rc.alsa b/source/ap/alsa-utils/rc.alsa
new file mode 100644
index 00000000..9e3cae30
--- /dev/null
+++ b/source/ap/alsa-utils/rc.alsa
@@ -0,0 +1,93 @@
+#!/bin/sh
+# Load the mixer settings and OSS compatibility for ALSA.
+# (the Advanced Linux Sound Architecture)
+
+# A function to load the ALSA mixer settings:
+load_alsa_mixer() {
+  if [ -r /etc/asound.state ]; then
+    echo "Loading ALSA mixer settings:  /usr/sbin/alsactl restore"
+    /usr/sbin/alsactl restore
+  else
+    # It's possible a user might not want to set a default sound state.
+    # In that case, do this:  touch /etc/no.asound.state
+    if [ ! -r /etc/no.asound.state ]; then
+      echo "Setting default ALSA mixer settings."
+      # set default mixer volumes for ALSA
+      # Taken from the alsaconfig script.
+      amixer -s -q <<EOF
+set Master 75% unmute
+set Master -12dB
+set 'Master Mono' 75% unmute
+set 'Master Mono' -12dB
+set Front 75% unmute
+set Front -12dB
+set PCM 90% unmute
+set PCM 0dB
+mixer Synth 90% unmute
+mixer Synth 0dB
+mixer CD 90% unmute
+mixer CD 0dB
+# mute mic
+set Mic 0% mute
+# ESS 1969 chipset has 2 PCM channels
+set PCM,1 90% unmute
+set PCM,1 0dB
+# Trident/YMFPCI/emu10k1
+set Wave 100% unmute
+set Music 100% unmute
+set AC97 100% unmute
+# CS4237B chipset:
+set 'Master Digital' 75% unmute
+# Envy24 chips with analog outs
+set DAC 90% unmute
+set DAC -12dB
+set DAC,0 90% unmute
+set DAC,0 -12dB
+set DAC,1 90% unmute
+set DAC,1 -12dB
+# some notebooks use headphone instead of master
+set Headphone 75% unmute
+set Headphone -12dB
+set Playback 100% unmute
+# turn off digital switches
+set "SB Live Analog/Digital Output Jack" off
+set "Audigy Analog/Digital Output Jack" off
+EOF
+      echo "Storing default ALSA mixer settings:  /usr/sbin/alsactl store"
+      /usr/sbin/alsactl store
+    fi
+  fi
+}
+
+# A function to load the ALSA OSS compat modules:
+load_alsa_oss_modules() {
+  if ! cat /proc/modules | tr _ - | grep -wq snd-pcm-oss ; then
+    echo "Loading OSS compatibility modules for ALSA."
+    modprobe snd-pcm-oss
+    modprobe snd-seq-oss
+    modprobe snd-mixer-oss
+  fi
+}
+
+# If hotplug or something else has loaded the ALSA modules, then
+# simply load the mixer settings and make sure the OSS compat
+# modules are loaded:
+if [ -d /proc/asound ]; then
+  load_alsa_oss_modules
+  load_alsa_mixer
+else
+  # If there are ALSA modules defined in /etc/modprobe.conf, but
+  # ALSA is not yet loaded, then load the modules now:
+  DRIVERS=$(modprobe -c | grep -E "^[[:space:]]*alias[[:space:]]+snd-card-[[:digit:]]" | tr -s "[[:blank:]]" " " | cut -d " " -f 3)
+  if [ ! "$DRIVERS" = "" ]; then
+    echo "Loading ALSA kernel modules."
+    for module in $DRIVERS; do
+      modprobe $module
+    done
+  fi
+  # If ALSA is now up, then load the mixer settings and OSS modules:
+  if [ -d /proc/asound ]; then
+    load_alsa_oss_modules
+    load_alsa_mixer
+  fi
+fi
diff --git a/source/ap/alsa-utils/slack-desc b/source/ap/alsa-utils/slack-desc
new file mode 100644
index 00000000..06ca73c0
--- /dev/null
+++ b/source/ap/alsa-utils/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+          |-----handy-ruler------------------------------------------------------|
+alsa-utils: alsa-utils (Advanced Linux Sound Architecture utilities) 
+alsa-utils:
+alsa-utils: The Advanced Linux Sound Architecture (ALSA) provides audio and MIDI
+alsa-utils: functionality to the Linux operating system.  This package contains
+alsa-utils: command line audio utilities for use with ALSA:
+alsa-utils:   alsactl        (manage soundcard settings)
+alsa-utils:   arecord/aplay  (capture and play audio)
+alsa-utils:   amixer         (adjust mixer settings from the command line)
+alsa-utils:   alsamixer      (an ncurses-based console mixer)
+alsa-utils:
+alsa-utils: For more information, see http://alsa-project.org