Slackware 13.0slackware-13.0

Wed Aug 26 10:00:38 CDT 2009
Slackware 13.0 x86_64 is released as stable!  Thanks to everyone who
helped make this release possible -- see the RELEASE_NOTES for the
credits.  The ISOs are off to the replicator.  This time it will be a
6 CD-ROM 32-bit set and a dual-sided 32-bit/64-bit x86/x86_64 DVD.
We're taking pre-orders now at store.slackware.com.  Please consider
picking up a copy to help support the project.  Once again, thanks to
the entire Slackware community for all the help testing and fixing
things and offering suggestions during this development cycle.
As always, have fun and enjoy!  -P.

3 files changed, 313 insertions, 0 deletions

diff --git a/source/ap/ghostscript/cidfmap b/source/ap/ghostscript/cidfmap
new file mode 100644
index 00000000..0303f66f
--- /dev/null
+++ b/source/ap/ghostscript/cidfmap
@@ -0,0 +1,118 @@
+%!
+% $Id: cidfmap 6300 2005-12-28 19:56:24Z giles $
+% This is a sample map file for CIDFont category.
+
+%
+% The map is a set of records, which must use one of the two formats :
+%
+% 1. A substutution of a CIF font with another CID font :
+%
+%    /substituted /original ;
+%
+%    Where 'substituted' is a name being used in a document,
+%    'original' is a name of an available resource.
+%
+% 2. A substutution of a CIF font with a True Type font :
+%
+%    /substituted << /FileType /TrueType /Path (path) /SunfontID 1 /CSI [(ordering) supplement] >> ;
+%
+%    Where 'substituted' is a name being used in a document,
+%    'path' is a path to a True Type font file,
+%    'ordering' is a value of Ordering required for CIDSystemInfo dictionary,
+%    'supplement' is a value of Supplement required for CIDSystemInfo dictionary.
+%
+% Examples :
+%
+%   /ShinGo-Bold   /HeiseiKakuGo-W5 ;
+%   /Ryumin-Medium << /FileType /TrueType /Path (H:/AuxFiles/Fonts/BATANG.TTC) /SubfontID 3 /CSI [(Japan1) 2] >> ;
+%
+
+
+%% cidfmap.zh_CN (simplified Chinese ; zh_CN)
+%% This font will produce better results than the wqy-zenhei.ttf that we use
+%% to get out-of-the-box output.
+%% If you install it, uncomment the line below and comment the one below that.
+%/BousungEG-Light-GB            << /FileType /TrueType /Path (uming.ttf) /CSI [(GB1) 4] >> ;
+/BousungEG-Light-GB             << /FileType /TrueType /Path (wqy-zenhei.ttf) /CSI [(GB1) 4] >> ;
+%% This font will produce better results than the wqy-zenhei.ttf that we use
+%% to get out-of-the-box output.
+%% If you install it, uncomment the line below and comment the one below that.
+%/GBZenKai-Medium		<< /FileType /TrueType /Path (ukai.ttf) /CSI [(GB1) 4] >> ;
+/GBZenKai-Medium		<< /FileType /TrueType /Path (wqy-zenhei.ttf) /CSI [(GB1) 4] >> ;
+/MSungGBK-Light			<< /FileType /TrueType /Path (wqy-zenhei.ttf) /CSI [(GB1) 4] >> ;
+/MSung-Light			/MSungGBK-Light ;
+/MSung-Medium			/GBZenKai-Medium ;
+/MHei-Medium			/BousungEG-Light-GB ;
+/MKai-Medium			/GBZenKai-Medium ;
+/STSong-Light			/BousungEG-Light-GB ;
+/STFangsong-Light		/BousungEG-Light-GB ;
+/STHeiti-Regular		/MSungGBK-Light ;
+/STKaiti-Regular		/GBZenKai-Medium ;
+/Adobe-GB1                      /BousungEG-Light-GB ;
+
+%% cidfmap.zh_TW (traditional Chinese ; zh_TW)
+%% To use this example, install the missing uming.ttf and ukai.ttf fonts, and
+%% uncomment everything in the block below.  Also, fix the simplified Chinese
+%% block as described above for "better output" so that there is no
+%% interference (or comment the whole block out).
+%/BousungEG-Light-GB		<< /FileType /TrueType /Path (uming.ttf) /CSI [(CNS1) 4] >> ;
+%/ZenKai-Medium			<< /FileType /TrueType /Path (ukai.ttf) /CSI [(CNS1) 4] >> ;
+%/ShanHeiSun-Light		<< /FileType /TrueType /Path (wqy-zenhei.ttf) /CSI [(CNS1) 4] >> ;
+%/STSong-Light			/BousungEG-Light-GB ;
+%/STKaiti-Regular		/ZenKai-Medium-GB ;
+%/STFangsong-Light		/BousungEG-Light ;
+%/STHeiti-Regular		/MHei-Medium ;
+%/MSung-Light			/BousungEG-Light-GB ;
+%/MSung-Medium			/ZenKai-Medium ;
+%/MHei-Medium			/ShanHeiSun-Light ;
+%/MKai-Medium			/ZenKai-Medium ;
+%/Adobe-CNS1			/BousungEG-Light-GB ;
+
+%% cidfmap.ja
+/Sazanami-Gothic 		<< /FileType /TrueType /Path (sazanami-gothic.ttf) /CSI [(Japan1) 6] >> ;
+/Sazanami-Gothic-Regular 	/Sazanami-Gothic ;
+/Sazanami-Gothic-JaH 		<< /FileType /TrueType /Path (sazanami-gothic.ttf) /CSI [(Japan2) 0] >> ;
+/Sazanami-Gothic-Regular-JaH 	/Sazanami-Gothic-JaH ;
+/Sazanami-Mincho 		<< /FileType /TrueType /Path (sazanami-mincho.ttf) /CSI [(Japan1) 6] >> ;
+/Sazanami-Mincho-Regular 	/Sazanami-Mincho ;
+/Sazanami-Mincho-JaH 		<< /FileType /TrueType /Path (sazanami-mincho.ttf) /CSI [(Japan2) 0] >> ;
+/Sazanami-Mincho-Regular-JaH 	/Sazanami-Mincho-JaH ;
+/Ryumin-Light           	/Sazanami-Mincho        ;
+/Ryumin-Light-H         	/Sazanami-Mincho        ;
+/GothicBBB-Medium       	/Sazanami-Gothic        ;
+/GothicBBB-Medium-V     	/Sazanami-Gothic        ;
+/HeiseiMin-W3           	/Ryumin-Light           ;
+/HeiseiKakuGo-W5        	/GothicBBB-Medium       ;
+/HeiseiMin-W3-Acro      	/Ryumin-Light           ;
+/HeiseiKaKuGo-W5-Acro   	/GothicBBB-Medium       ;
+/Kochi-Gothic           	/Sazanami-Gothic        ;
+/Kochi-Mincho           	/Sazanami-Mincho        ;
+/WadaMin-Regular        	/Sazanami-Mincho        ;
+/WadaMin-Bold           	/Sazanami-Mincho        ;
+/WadaGo-Regular         	/Sazanami-Gothic        ;
+/WadaGo-Bold            	/Sazanami-Gothic        ;
+/Adobe-Japan1           	/Sazanami-Gothic        ;
+/Adobe-Japan2           	/Sazanami-Gothic-JaH    ;
+
+%% cidfmap.ko
+%% To enable Korean printing support, install the fonts shown in the example
+%% here and uncomment the block below:
+%/Baekmuk-Batang		<< /FileType /TrueType /Path (batang.ttf) /CSI [(Korea1) 2] >> ;
+%/Baekmuk-Batang-Regular	/Baekmuk-Batang ;
+%/Baekmuk-Dotum			<< /FileType /TrueType /Path (dotum.ttf) /CSI [(Korea1) 2] >> ;
+%/Baekmuk-Dotum-Regular		/Baekmuk-Dotum ;
+%/Baekmuk-Gulim			<< /FileType /TrueType /Path (gulim.ttf) /CSI [(Korea1) 2] >> ;
+%/Baekmuk-Gulim-Regular		/Baekmuk-Gulim ;
+%/Baekmuk-Headline		<< /FileType /TrueType /Path (hline.ttf) /CSI [(Korea1) 2] >> ;
+%/Baekmuk-Headline-Regular	/Baekmuk-Headline ;
+%/Adobe-Korea1			/Baekmuk-Batang ;
+
+%/BousungEG-Light-GB	<< /FileType /TrueType /Path (uming.ttf) /CSI [(GB1) 4] >> ;
+%/GBZenKai-Medium	<< /FileType /TrueType /Path (ukai.ttf) /CSI [(GB1) 4] >> ;
+%/MSungGBK-Light	/BousungEG-Light-GB ;
+%/Adobe-GB1		/BousungEG-Light-GB ;
+
+%/ZenKai-Medium		<< /FileType /TrueType /Path (ukai.ttf) /CSI [(CNS1) 4] >> ;
+%/ShanHeiSun-Light	<< /FileType /TrueType /Path (uming.ttf) /CSI [(CNS1) 4] >> ;
+%/Adobe-CNS1		/ShanHeiSun-Light ;
+
diff --git a/source/ap/ghostscript/ghostscript.SlackBuild b/source/ap/ghostscript/ghostscript.SlackBuild
new file mode 100755
index 00000000..b0bb34ba
--- /dev/null
+++ b/source/ap/ghostscript/ghostscript.SlackBuild
@@ -0,0 +1,176 @@
+#!/bin/sh
+
+# Copyright 2006, 2007, 2008, 2009  Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+PKGNAM=ghostscript
+VERSION=${VERSION:-8.70}
+ARCH=${ARCH:-x86_64}
+BUILD=${BUILD:-1}
+
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-${PKGNAM}
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+fi
+
+cd $TMP
+rm -rf ${PKGNAM}-${VERSION}
+tar xvf $CWD/${PKGNAM}-$VERSION.tar.?z* || exit 1
+cd ${PKGNAM}-$VERSION
+
+## Regenerate ./configure:
+#sh autogen.sh
+
+# Make sure ownerships and permissions are sane:
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+# Build/install IJS:
+( cd ijs
+  if [ ! -r configure ]; then
+    sh autogen.sh
+  fi
+  CFLAGS="$SLKCFLAGS" \
+  ./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --mandir=/usr/man \
+  --program-prefix= \
+  --program-suffix= \
+  --build=$ARCH-slackware-linux
+  make
+  make install
+  make install DESTDIR=$PKG
+) || exit 1
+
+# Configure:
+CFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --mandir=/usr/man \
+  --with-fontpath=/usr/share/fonts/TTF \
+  --with-ijs \
+  --disable-compile-inits \
+  --enable-dynamic \
+  --enable-cairo=no \
+  --program-prefix= \
+  --program-suffix= \
+  --build=$ARCH-slackware-linux
+
+# Build and install:
+make || exit 1
+make install DESTDIR=$PKG || exit 1
+make clean || exit 1
+make so || exit 1
+make soinstall DESTDIR=$PKG || exit 1
+
+# Replace the default cidfmap with one containing additional
+# support for CJK printing:
+
+if [ -r $PKG/usr/share/ghostscript/${VERSION}/Resource/Init/cidfmap ]; then
+  mv $PKG/usr/share/ghostscript/${VERSION}/Resource/Init/cidfmap $PKG/usr/share/ghostscript/${VERSION}/Resource/Init/cidfmap.default.ghostscript-${VERSION}
+  zcat $CWD/cidfmap.gz > $PKG/usr/share/ghostscript/${VERSION}/Resource/Init/cidfmap.new
+fi
+
+# Strip binaries:
+( cd $PKG
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+)
+
+# Compress and link manpages, if any:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.*
+      )
+    done
+  )
+fi
+
+# Compress info files, if any:
+if [ -d $PKG/usr/info ]; then
+  ( cd $PKG/usr/info
+    rm -f dir
+    gzip -9 *
+  )
+fi
+
+# Add a documentation directory:
+mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION
+( cd doc
+  cp -a \
+    COPYING ../LICENSE README \
+    $PKG/usr/doc/${PKGNAM}-$VERSION
+)
+( cd $PKG/usr/doc/${PKGNAM}-$VERSION
+  ln -sf /usr/share/ghostscript/$VERSION/doc doc
+)
+
+cd $TMP
+cp -a ${PKGNAM}-${VERSION}/examples/cjk $PKG/usr/share/ghostscript/${VERSION}/examples/
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+cat << EOF > $PKG/install/doinst.sh
+#!/bin/sh
+config() {
+  NEW="\$1"
+  OLD="\$(dirname \$NEW)/\$(basename \$NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r \$OLD ]; then
+    mv \$NEW \$OLD
+  elif [ "\$(cat \$OLD | md5sum)" = "\$(cat \$NEW | md5sum)" ]; then # toss the redundant copy
+    rm \$NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+config usr/share/ghostscript/${VERSION}/Resource/Init/cidfmap.new
+EOF
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/${PKGNAM}-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/source/ap/ghostscript/slack-desc b/source/ap/ghostscript/slack-desc
new file mode 100644
index 00000000..1ac40827
--- /dev/null
+++ b/source/ap/ghostscript/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+           |-----handy-ruler------------------------------------------------------|
+ghostscript: ghostscript (GPL Ghostscript)
+ghostscript:
+ghostscript: GPL Ghostscript is an interpreter of Adobe Systems' PostScript(tm)
+ghostscript: and Portable Document Format (PDF) languages.  Ghostscript is an
+ghostscript: essential part of the printing subsystem, taking PostScript output
+ghostscript: from applications and converting it into an appropriate printer or
+ghostscript: display format.  Ghostscript supports many printers directly, and
+ghostscript: more are supported through add-on packages.
+ghostscript:
+ghostscript:
+ghostscript: