Thu Sep 13 21:41:51 UTC 201820180913214151

a/sysvinit-scripts-2.1-noarch-20.txz:  Rebuilt.
  rc.6: it was reported by birdboy that JFS is not properly unmounted unless
  the order of unmounting local filesystems followed by remounting the root
  filesystem read-only is inverted. I tried that, and although it did get rid
  of a "/ filesystem is busy" error during shutdown, the JFS / filesystem was
  still checked at boot (and found to be clean). I believe that the existing
  order of unmounting non-root filesystems followed by remounting the root
  filesystem as read-only is the correct order, and found that putting
  another sync between these also gets rid of the error on shutdown, so I've
  done that. When using JFS as the root filesystem there's still another
  similar error message that's generated earlier in the boot, though. I'm
  unable to find any way to shut down a JFS root partition in a way that
  leaves it clean enough that fsck will not check it at boot, but it is always
  found to be clean so this should only be cosmetic. I recall this behavior of
  JFS going all the way back to when it was first added to the kernel. If
  anyone has a better fix, I'll take a look at it, but in my opinion it's not
  really anything to worry about.
ap/ghostscript-9.25-x86_64-1.txz:  Upgraded.
  This release fixes problems with argument handling, some unintended
  results of the security fixes to the SAFER file access restrictions
  (specifically accessing ICC profile files), and some additional
  security issues over the recent 9.24 release.
  For more information, see:
    https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2018-16509
  (* Security fix *)
ap/squashfs-tools-20180612_6e242dc-x86_64-1.txz:  Upgraded.
  Linked against libzstd.so.1. Thanks to alienBOB.
ap/sudo-1.8.25p1-x86_64-1.txz:  Upgraded.
d/binutils-2.31.1-x86_64-4.txz:  Rebuilt.
  Since baldzhang has pointed out a valid use case for windres on Linux,
  we are restoring the "Windows only" utilities, as none of them are
  very large and there may be valid uses for the other ones as well.
l/freetype-2.9.1-x86_64-2.txz:  Rebuilt.
  Patched to build properly if windres is present on the machine.
l/sg3_utils-1.44-x86_64-1.txz:  Upgraded.
l/zstd-1.3.5-x86_64-1.txz:  Added.
  Thanks to alienBOB.
xfce/tumbler-0.2.3-x86_64-1.txz:  Upgraded.
isolinux/initrd.img:  Rebuilt.
  Use the ter-114v terminus font. It has been reported that the font we were
  using (ter-v14v) restricts the available console colors from 16 to 8 due
  to needing an extra bit for the higher number of available glyphs (though
  in testing here I couldn't see any difference). The new font covers
  ISO8859-1, ISO8859-15, and Windows-1252 codepages. I'm still not sure it's
  the best choice, so additional input is welcomed.
  Thanks to bormant.
usb-and-pxe-installers/usbboot.img:  Rebuilt.
  Use the ter-114v terminus font.

5 files changed, 2 insertions, 187 deletions

diff --git a/source/ap/ghostscript/ghostscript.13418541a5ae19b15f51cbb87faf344902f5af98.patch b/source/ap/ghostscript/ghostscript.13418541a5ae19b15f51cbb87faf344902f5af98.patch
deleted file mode 100644
index 13fd2503..00000000
--- a/source/ap/ghostscript/ghostscript.13418541a5ae19b15f51cbb87faf344902f5af98.patch
+++ /dev/null
@@ -1,55 +0,0 @@
-From 13418541a5ae19b15f51cbb87faf344902f5af98 Mon Sep 17 00:00:00 2001
-From: Chris Liddell <chris.liddell@artifex.com>
-Date: Thu, 6 Sep 2018 18:40:05 +0100
-Subject: [PATCH] Bug 699722 (2): add wildcards to the permissions paths.
-
-The temp and ICC profile paths need to finish with wildcards to work correctly.
----
- Resource/Init/gs_init.ps | 10 +++++-----
- 1 file changed, 5 insertions(+), 5 deletions(-)
-
-diff --git a/Resource/Init/gs_init.ps b/Resource/Init/gs_init.ps
-index 83918a9..5ff9f63 100644
---- a/Resource/Init/gs_init.ps
-+++ b/Resource/Init/gs_init.ps
-@@ -2034,7 +2034,7 @@ readonly def
-     <<
-       /PermitFileReading [
-         currentuserparams /PermitFileReading get aload pop
--        //tempfilepaths aload pop
-+        [//tempfilepaths aload pop] (*) .generate_dir_list_templates
-         /FONTPATH .systemvar (*) .generate_dir_list_templates
-           % Library files :
-         /LIBPATH  .systemvar (*) .generate_dir_list_templates
-@@ -2049,15 +2049,15 @@ readonly def
-           [ currentsystemparams /GenericResourceDir get] (*) .file_name_separator (*)
-             concatstrings concatstrings .generate_dir_list_templates
-         } if
--        currentuserparams /ICCProfilesDir known {currentuserparams /ICCProfilesDir get} if
-+        currentuserparams /ICCProfilesDir known {[currentuserparams /ICCProfilesDir get] (*) .generate_dir_list_templates} if
-       ]
-       /PermitFileWriting [
-           currentuserparams /PermitFileWriting get aload pop
--          //tempfilepaths aload pop
-+          [//tempfilepaths aload pop] (*) .generate_dir_list_templates
-       ]
-       /PermitFileControl [
-           currentuserparams /PermitFileControl get aload pop
--          //tempfilepaths aload pop
-+          [//tempfilepaths aload pop] (*) .generate_dir_list_templates
-       ]
-       /LockFilePermissions //true
-     >> setuserparams
-@@ -2140,7 +2140,7 @@ SAFER { .setsafeglobal } if
-   /.setshapealpha            % transparency-example.ps
-   /.endtransparencygroup     % transparency-example.ps
-   /.setdotlength             % Bug687720.ps
--  /.sort /.setdebug /.mementolistnewblocks /getenv
-+  /.sort /.mementolistnewblocks /getenv
- 
-   /.makeoperator /.setCPSImode              % gs_cet.ps, this won't work on cluster with -dSAFER
- 
--- 
-2.9.1
-
-
diff --git a/source/ap/ghostscript/ghostscript.SlackBuild b/source/ap/ghostscript/ghostscript.SlackBuild
index fa96e4bf..0e113a3a 100755
--- a/source/ap/ghostscript/ghostscript.SlackBuild
+++ b/source/ap/ghostscript/ghostscript.SlackBuild
@@ -27,7 +27,7 @@ if [ -r gnu-ghostscript-*.tar.?z ]; then
   SRCPREFIX="gnu-"
 fi
 VERSION=${VERSION:-$(echo $SRCPREFIX$PKGNAM-*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-3}
+BUILD=${BUILD:-1}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
@@ -76,13 +76,6 @@ cd ${SRCPREFIX}${PKGNAM}-$VERSION || exit 1
 # Remove unmaintained garbage:
 rm -rf freetype jpeg lcms2 libpng libtiff png tiff zlib
 
-# Upstream patch to fix "Filter failed." issue:
-zcat $CWD/ghostscript.fix.filter.failed.bc3df077.patch.gz | patch -p1 --verbose || exit 1
-
-# Upstream patches to fix printing PDF files:
-zcat $CWD/ghostscript.c8c01f8c4164bc10281d9e8f87cf96314d93104b.patch.gz | patch -p1 --verbose || exit 1
-zcat $CWD/ghostscript.13418541a5ae19b15f51cbb87faf344902f5af98.patch.gz | patch -p1 --verbose || exit 1
-
 # Regenerate ./configure.  Needed if patched, or to prevent libtool mismatch.
 autoreconf --force --install
 ( cd jbig2dec ; autoreconf --force --install )
diff --git a/source/ap/ghostscript/ghostscript.c8c01f8c4164bc10281d9e8f87cf96314d93104b.patch b/source/ap/ghostscript/ghostscript.c8c01f8c4164bc10281d9e8f87cf96314d93104b.patch
deleted file mode 100644
index b1f4799f..00000000
--- a/source/ap/ghostscript/ghostscript.c8c01f8c4164bc10281d9e8f87cf96314d93104b.patch
+++ /dev/null
@@ -1,43 +0,0 @@
-From c8c01f8c4164bc10281d9e8f87cf96314d93104b Mon Sep 17 00:00:00 2001
-From: Chris Liddell <chris.liddell@artifex.com>
-Date: Thu, 6 Sep 2018 14:08:41 +0100
-Subject: [PATCH] Bug 699722: Add the ICCProfilesDir to the PermitReading list
-
-There was also an issue that the string being returned from the graphics
-library was null terminated, and Postscript strings are not (and Ghostscript
-strings are not necessarily). We leave the null termination in place, but
-reduce the length returned by 1.
----
- Resource/Init/gs_init.ps | 1 +
- base/gsicc_manage.c      | 2 +-
- 2 files changed, 2 insertions(+), 1 deletion(-)
-
-diff --git a/Resource/Init/gs_init.ps b/Resource/Init/gs_init.ps
-index bc8b795..83918a9 100644
---- a/Resource/Init/gs_init.ps
-+++ b/Resource/Init/gs_init.ps
-@@ -2049,6 +2049,7 @@ readonly def
-           [ currentsystemparams /GenericResourceDir get] (*) .file_name_separator (*)
-             concatstrings concatstrings .generate_dir_list_templates
-         } if
-+        currentuserparams /ICCProfilesDir known {currentuserparams /ICCProfilesDir get} if
-       ]
-       /PermitFileWriting [
-           currentuserparams /PermitFileWriting get aload pop
-diff --git a/base/gsicc_manage.c b/base/gsicc_manage.c
-index 69f05c4..ff685e7 100644
---- a/base/gsicc_manage.c
-+++ b/base/gsicc_manage.c
-@@ -2972,7 +2972,7 @@ gs_currenticcdirectory(const gs_gstate * pgs, gs_param_string * pval)
-         pval->persistent = true;
-     } else {
-         pval->data = (const byte *)(lib_ctx->profiledir);
--        pval->size = lib_ctx->profiledir_len;
-+        pval->size = lib_ctx->profiledir_len - 1;
-         pval->persistent = false;
-     }
- }
--- 
-2.9.1
-
-
diff --git a/source/ap/ghostscript/ghostscript.fix.filter.failed.bc3df077.patch b/source/ap/ghostscript/ghostscript.fix.filter.failed.bc3df077.patch
deleted file mode 100644
index 7193b8f5..00000000
--- a/source/ap/ghostscript/ghostscript.fix.filter.failed.bc3df077.patch
+++ /dev/null
@@ -1,80 +0,0 @@
-From bc3df0773fccf4b4906a3e59652ad646ea0fee91 Mon Sep 17 00:00:00 2001
-From: Chris Liddell <chris.liddell@artifex.com>
-Date: Tue, 4 Sep 2018 17:01:08 +0100
-Subject: [PATCH] For ICC profile validation, have cups id iteself as DeviceN
-
-Give the range of color spaces and models that cups supports, we can't
-reasonably provide (or expect others to provide) output ICC profiles for all
-cases.
-
-For the purpose of profile validation, have it claim to be DeviceN and benefit
-from the extra tolerance in profiles allowed for that class of device.
----
- cups/gdevcups.c  | 15 ++++++++++++++-
- devices/devs.mak |  2 +-
- 2 files changed, 15 insertions(+), 2 deletions(-)
-
-diff --git a/cups/gdevcups.c b/cups/gdevcups.c
-index c1574f8..decd8eb 100644
---- a/cups/gdevcups.c
-+++ b/cups/gdevcups.c
-@@ -70,6 +70,7 @@
- #include "std.h"                /* to stop stdlib.h redefining types */
- #include "gdevprn.h"
- #include "gsparam.h"
-+#include "gxdevsop.h"
- #include "arch.h"
- #include "gsicc_manage.h"
- 
-@@ -252,6 +253,7 @@ private int cups_put_params(gx_device *, gs_param_list *);
- private int cups_set_color_info(gx_device *);
- private dev_proc_sync_output(cups_sync_output);
- private prn_dev_proc_get_space_params(cups_get_space_params);
-+private int cups_spec_op(gx_device *dev_, int op, void *data, int datasize);
- 
- #ifdef dev_t_proc_encode_color
- private cm_map_proc_gray(cups_map_gray);
-@@ -392,7 +394,7 @@ private gx_device_procs	cups_procs =
-    NULL,				/* push_transparency_state */
-    NULL,				/* pop_transparency_state */
-    NULL,                                /* put_image */
--
-+   cups_spec_op
- };
- 
- #define prn_device_body_copies(dtype, procs, dname, w10, h10, xdpi, ydpi, lo, to, lm, bm, rm, tm, ncomp, depth, mg, mc, dg, dc, print_pages)\
-@@ -5927,6 +5929,17 @@ cups_print_planar(gx_device_printer *pdev,
-   return (0);
- }
- 
-+private int
-+cups_spec_op(gx_device *dev_, int op, void *data, int datasize)
-+{
-+    /* Although not strictly DeviceN, the range of color models
-+       this device supports presets similar issues.
-+     */
-+    if (op == gxdso_supports_devn) {
-+        return true;
-+    }
-+    return gx_default_dev_spec_op(dev_, op, data, datasize);
-+}
- 
- /*
-  */
-diff --git a/devices/devs.mak b/devices/devs.mak
-index c85604c..e8654e5 100644
---- a/devices/devs.mak
-+++ b/devices/devs.mak
-@@ -1860,7 +1860,7 @@ $(DD)pwgraster.dev : $(lcups_dev) $(lcupsi_dev) $(cups_) $(GDEV) \
- 	$(ADDMOD) $(DD)pwgraster -include $(lcups_dev)
- 	$(ADDMOD) $(DD)pwgraster -include $(lcupsi_dev)
- 
--$(DEVOBJ)gdevcups.$(OBJ) : $(LCUPSSRCDIR)$(D)gdevcups.c $(std_h) $(DEVS_MAK) $(MAKEDIRS)
-+$(DEVOBJ)gdevcups.$(OBJ) : $(LCUPSSRCDIR)$(D)gdevcups.c $(std_h) $(gxdevsop_h) $(DEVS_MAK) $(MAKEDIRS)
- 	$(CUPS_CC) $(DEVO_)gdevcups.$(OBJ) $(C_) $(CFLAGS) $(CUPSCFLAGS) \
- 	    $(I_)$(GLSRC) \
- 	    $(I_)$(DEVSRC) \
--- 
-2.9.1
-
-
diff --git a/source/ap/ghostscript/ghostscript.url b/source/ap/ghostscript/ghostscript.url
index 97f57f6c..1483f125 100644
--- a/source/ap/ghostscript/ghostscript.url
+++ b/source/ap/ghostscript/ghostscript.url
@@ -1 +1 @@
-https://github.com/ArtifexSoftware/ghostpdl-downloads/releases/download/gs924/ghostscript-9.24.tar.xz
+https://github.com/ArtifexSoftware/ghostpdl-downloads/releases/download/gs925/ghostscript-9.25.tar.xz