Slackware 13.0slackware-13.0

Wed Aug 26 10:00:38 CDT 2009
Slackware 13.0 x86_64 is released as stable!  Thanks to everyone who
helped make this release possible -- see the RELEASE_NOTES for the
credits.  The ISOs are off to the replicator.  This time it will be a
6 CD-ROM 32-bit set and a dual-sided 32-bit/64-bit x86/x86_64 DVD.
We're taking pre-orders now at store.slackware.com.  Please consider
picking up a copy to help support the project.  Once again, thanks to
the entire Slackware community for all the help testing and fixing
things and offering suggestions during this development cycle.
As always, have fun and enjoy!  -P.

4 files changed, 334 insertions, 0 deletions

diff --git a/source/d/perl/doinst.sh b/source/d/perl/doinst.sh
new file mode 100644
index 00000000..8d2debb0
--- /dev/null
+++ b/source/d/perl/doinst.sh
@@ -0,0 +1,13 @@
+#!/bin/sh
+config() {
+  NEW="$1"
+  OLD="`dirname $NEW`/`basename $NEW .new`"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r $OLD ]; then
+    mv $NEW $OLD
+  elif [ "`cat $OLD | md5sum`" = "`cat $NEW | md5sum`" ]; then # toss the redundant copy
+    rm $NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+config usr/lib/perl5/5.10.0/i486-linux-thread-multi/perllocal.pod.new
diff --git a/source/d/perl/perl.SlackBuild b/source/d/perl/perl.SlackBuild
new file mode 100755
index 00000000..9aa963d6
--- /dev/null
+++ b/source/d/perl/perl.SlackBuild
@@ -0,0 +1,267 @@
+#!/bin/sh
+
+# Copyright 2009  Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+# originally by:  David Cantrell <david@slackware.com>
+# maintained by:  <volkerdi@slackware.com>
+
+VERSION=5.10.0
+# IMPORTANT: also update -Dinc_version_list in ./configure below!
+
+ARCH=${ARCH:-x86_64}
+BUILD=${BUILD:-2}
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-perl
+
+# Additional required modules:
+DBI=1.607
+DBDMYSQL=4.008
+XMLPARSER=2.36
+XMLSIMPLE=2.18
+URI=1.37
+
+if [ "$ARCH" = "i386" ]; then
+  SLKCFLAGS="-O2 -march=i386 -mcpu=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+fi
+
+if [ -x /usr/bin/perl ]; then
+  echo "Perl detected."
+  echo
+  echo "It's a good idea to remove your existing perl first."
+  echo
+  sleep 15
+fi
+
+# Clear build location:
+rm -rf $PKG
+mkdir -p $PKG
+
+# Extract the source code:
+cd $TMP
+rm -rf perl-$VERSION
+tar xvf $CWD/perl-$VERSION.tar.bz2
+
+# Change into the source directory:
+cd perl-$VERSION
+
+# Adjust owner/perms to standard values:
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \; -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \;
+
+# If after all this time you still don't trust threads, comment
+# out the variable below:
+#
+USE_THREADS="-Dusethreads -Duseithreads"
+
+if [ "$ARCH" = "x86_64" ]; then # adopted from "Cross Linux From Scratch"
+  # Configure must be told to also use lib64:
+  zcat $CWD/perl.configure.multilib.patch.gz | patch -p1 --verbose || exit 1
+  # "perl -V" should report that libc is in /lib64
+  sed -i -e '/libc/s#/lib/#/lib64/#' hints/linux.sh
+  # make perl use lib64:
+  echo 'installstyle="lib64/perl5"' >>hints/linux.sh
+fi
+
+# We no longer include suidperl.  To quote the INSTALL file:
+#
+#   Because of the buggy history of suidperl, and the difficulty
+#   of properly security auditing as large and complex piece of
+#   software as Perl, we cannot recommend using suidperl and the feature
+#   should be considered deprecated.
+#   Instead use for example 'sudo': http://www.courtesan.com/sudo/
+
+# Configure perl:
+./Configure -de \
+  -Dprefix=/usr \
+  -Dvendorprefix=/usr \
+  -Dcccdlflags='-fPIC' \
+  -Dinstallprefix=/usr \
+  -Dlibpth="/usr/local/lib${LIBDIRSUFFIX} /usr/lib${LIBDIRSUFFIX} /lib${LIBDIRSUFFIX}" \
+  -Doptimize="$SLKCFLAGS" \
+  $USE_THREADS \
+  -Dpager='/usr/bin/less -isr' \
+  -Dinc_version_list='5.8.8 5.8.7 5.8.6 5.8.5 5.8.4 5.8.3 5.8.2 5.8.1 5.8.0' \
+  -Darchname=$ARCH-linux
+
+# Kludge for gcc-4.2.4's needlessly changed output:
+cat makefile | grep -v '\<command-line\>' > foo
+mv foo makefile
+cat x2p/makefile | grep -v '\<command-line\>' > foo
+mv foo x2p/makefile
+
+# Build perl
+make -j6 || exit 1
+make test
+
+# Install perl (needed to build modules):
+make install
+( cd /usr/bin
+  ln -sf perl$VERSION perl
+  ln -sf c2ph pstruct
+  ln -sf s2p psed
+)
+mkdir -p /usr/lib${LIBDIRSUFFIX}/perl5/vendor_perl/${VERSION}/${ARCH}-linux-thread-multi
+
+# Install perl package:
+make install DESTDIR=$PKG
+mkdir -p $PKG/usr/lib${LIBDIRSUFFIX}/perl5/vendor_perl/${VERSION}/${ARCH}-linux-thread-multi
+
+# Add additional modules:
+( cd ext
+  ( tar xzvf $CWD/DBI-${DBI}.tar.gz
+    cd DBI-${DBI}
+    chown -R root:root .
+    perl Makefile.PL INSTALLDIRS=vendor
+    make
+    make test
+    make install
+    make install DESTDIR=$PKG
+    mkdir -p $PKG/usr/doc/perl-$VERSION/DBI-${DBI}
+    cp -a README $PKG/usr/doc/perl-$VERSION/DBI-${DBI}
+    chmod 644 $PKG/usr/doc/perl-$VERSION/DBI-${DBI}/README
+  )
+  ( tar xzvf $CWD/DBD-mysql-${DBDMYSQL}.tar.gz
+    cd DBD-mysql-${DBDMYSQL}
+    chown -R root:root .
+    perl Makefile.PL INSTALLDIRS=vendor
+    make
+    make test
+    make install
+    make install DESTDIR=$PKG
+    mkdir -p $PKG/usr/doc/perl-$VERSION/DBD-mysql-${DBDMYSQL}
+    cp -a INSTALL.html README TODO $PKG/usr/doc/perl-$VERSION/DBD-mysql-${DBDMYSQL}
+    chmod 644 $PKG/usr/doc/perl-$VERSION/DBD-mysql-${DBDMYSQL}/*
+  )
+  ( tar xzvf $CWD/XML-Parser-${XMLPARSER}.tar.gz
+    cd XML-Parser-${XMLPARSER}
+    chown -R root:root .
+    perl Makefile.PL INSTALLDIRS=vendor
+    make
+    make test
+    make install
+    make install DESTDIR=$PKG
+    mkdir -p $PKG/usr/doc/perl-$VERSION/XML-Parser-${XMLPARSER}
+    cp -a README $PKG/usr/doc/perl-$VERSION/XML-Parser-${XMLPARSER}
+    chmod 644 $PKG/usr/doc/perl-$VERSION/XML-Parser-${XMLPARSER}/*
+  )
+  ( tar xzvf $CWD/XML-Simple-${XMLSIMPLE}.tar.gz
+    cd XML-Simple-${XMLSIMPLE}
+    chown -R root:root .
+    perl Makefile.PL INSTALLDIRS=vendor
+    make
+    make test
+    make install
+    make install DESTDIR=$PKG
+    mkdir -p $PKG/usr/doc/perl-$VERSION/XML-Simple${XMLSIMPLE}
+    cp -a README $PKG/usr/doc/perl-$VERSION/XML-Simple${XMLSIMPLE}
+    chmod 644 $PKG/usr/doc/perl-$VERSION/XML-Simple${XMLSIMPLE}/*
+  )
+  ( tar xzvf $CWD/URI-${URI}.tar.gz
+    cd URI-${URI}
+    chown -R root:root .
+    perl Makefile.PL INSTALLDIRS=vendor
+    make
+    make test
+    make install
+    make install DESTDIR=$PKG
+    mkdir -p $PKG/usr/doc/perl-$VERSION/URI-${URI}
+    cp -a README $PKG/usr/doc/perl-$VERSION/URI-${URI}
+    chmod 644 $PKG/usr/doc/perl-$VERSION/URI-${URI}/*
+  )
+)
+
+# Strip everything:
+( cd $PKG
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+)
+
+# There are also miniperl and microperl.
+# I haven't had any requests for them, but would be willing
+# to consider adding one or both to the package if anyone
+# actually needs them for some reason.
+#make microperl
+
+# Symlinks that replace hard links
+( cd $PKG/usr/bin
+  ln -sf perl$VERSION perl
+  ln -sf c2ph pstruct
+  ln -sf s2p psed )
+
+# Install documentation
+mkdir -p $PKG/usr/doc/perl-$VERSION
+cp -a \
+  AUTHORS Artistic Copying INSTALL MANIFEST README README.Y2K README.cn \
+  README.jp README.ko README.micro README.tw Todo.micro \
+  $PKG/usr/doc/perl-$VERSION
+
+# We follow LSB with symlinks in /usr/share:
+( cd $PKG/usr/share
+  mv man .. )
+( cd $PKG/usr/man/man1
+  mkdir foo
+  cp *.1 foo
+  rm *.1
+  mv foo/* .
+  rmdir foo
+  gzip -9 *
+  ln -sf c2ph.1.gz pstruct.1.gz
+  ln -sf s2p.1.gz psed.1.gz )
+( cd $PKG/usr/man/man3
+  gzip -9 * )
+
+chmod 755 $PKG/usr/bin/*
+chmod 644 $PKG/usr/man/man?/*
+rmdir $PKG/usr/share
+
+# This file shouldn't get clobbered:
+if [ -r $PKG/usr/lib${LIBDIRSUFFIX}/perl5/${VERSION}/${ARCH}-linux-thread-multi/perllocal.pod ]; then
+  mv $PKG/usr/lib${LIBDIRSUFFIX}/perl5/${VERSION}/${ARCH}-linux-thread-multi/perllocal.pod $PKG/usr/lib${LIBDIRSUFFIX}/perl5/${VERSION}/${ARCH}-linux-thread-multi/perllocal.pod.new
+fi
+
+# Insert the slack-desc:
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+zcat $CWD/doinst.sh.gz | \
+  sed -e "s#/lib/#/lib${LIBDIRSUFFIX}/#" | sed -e "s#i486#$ARCH#" \
+  > $PKG/install/doinst.sh
+
+# Build the package:
+cd $PKG
+makepkg -l y -c n $TMP/perl-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/source/d/perl/perl.configure.multilib.patch b/source/d/perl/perl.configure.multilib.patch
new file mode 100644
index 00000000..c86ce65f
--- /dev/null
+++ b/source/d/perl/perl.configure.multilib.patch
@@ -0,0 +1,35 @@
+Submitted By: Ryan Oliver <ryan(dot)oliver(at)pha(dot)com(dot)au>
+Date: 2005-10-20
+Initial Package Version: 5.8.7
+Origin: Ryan Oliver
+Description: this patch allows perl to be installed in /usr/lib32 or /usr/lib64 instead of /usr/lib.
+
+--- perl-5.8.7/Configure-ORIG	2005-10-20 11:49:47.571389008 +1000
++++ perl-5.8.7/Configure	2005-10-20 12:30:35.571236464 +1000
+@@ -5930,6 +5930,8 @@
+ : The default "style" setting is made in installstyle.U
+ case "$installstyle" in
+ *lib/perl5*) set dflt privlib lib/$package/$version ;;
++*lib32/perl5*) set dflt privlib lib32/$package/$version ;;
++*lib64/perl5*) set dflt privlib lib64/$package/$version ;;
+ *)	 set dflt privlib lib/$version ;;
+ esac
+ eval $prefixit
+@@ -6433,6 +6435,8 @@
+ case "$sitelib" in
+ '') case "$installstyle" in
+ 	*lib/perl5*) dflt=$siteprefix/lib/$package/site_$prog/$version ;;
++	*lib32/perl5*) dflt=$siteprefix/lib32/$package/site_$prog/$version ;;
++	*lib64/perl5*) dflt=$siteprefix/lib64/$package/site_$prog/$version ;;
+ 	*)	 dflt=$siteprefix/lib/site_$prog/$version ;;
+ 	esac
+ 	;;
+@@ -6560,6 +6564,8 @@
+ 		prog=`echo $package | $sed 's/-*[0-9.]*$//'`
+ 		case "$installstyle" in
+ 		*lib/perl5*) dflt=$vendorprefix/lib/$package/vendor_$prog/$version ;;
++		*lib32/perl5*) dflt=$vendorprefix/lib32/$package/vendor_$prog/$version ;;
++		*lib64/perl5*) dflt=$vendorprefix/lib64/$package/vendor_$prog/$version ;;
+ 		*)	     dflt=$vendorprefix/lib/vendor_$prog/$version ;;
+ 		esac
+ 		;;
diff --git a/source/d/perl/slack-desc b/source/d/perl/slack-desc
new file mode 100644
index 00000000..e28cf941
--- /dev/null
+++ b/source/d/perl/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+    |-----handy-ruler------------------------------------------------------|
+perl: perl (Practical Extraction and Report Language)
+perl:
+perl: Larry Wall's "Practical Extraction and Report Language".  Perl is a
+perl: language optimized for scanning arbitrary text files, extracting
+perl: information from those text files, and printing reports based on that
+perl: information.  It's also a good language for many system management
+perl: tasks.  The language is intended to be practical (easy to use,
+perl: efficient, complete) rather than beautiful (tiny, elegant, minimal).
+perl:
+perl:
+perl: