Mon May 28 19:12:29 UTC 201820180528191229

a/pkgtools-15.0-noarch-13.txz:  Rebuilt.
  installpkg: default line length for --terselength is the number of columns.
  removepkg: added --terse mode.
  upgradepkg: default line length for --terselength is the number of columns.
  upgradepkg: accept -option in addition to --option.
ap/vim-8.1.0026-x86_64-1.txz:  Upgraded.
d/bison-3.0.5-x86_64-1.txz:  Upgraded.
e/emacs-26.1-x86_64-1.txz:  Upgraded.
kde/kopete-4.14.3-x86_64-8.txz:  Rebuilt.
  Recompiled against libidn-1.35.
n/conntrack-tools-1.4.5-x86_64-1.txz:  Upgraded.
n/libnetfilter_conntrack-1.0.7-x86_64-1.txz:  Upgraded.
n/libnftnl-1.1.0-x86_64-1.txz:  Upgraded.
n/links-2.16-x86_64-2.txz:  Rebuilt.
  Rebuilt to enable X driver for -g mode.
n/lynx-2.8.9dev.19-x86_64-1.txz:  Upgraded.
n/nftables-0.8.5-x86_64-1.txz:  Upgraded.
n/p11-kit-0.23.11-x86_64-1.txz:  Upgraded.
n/ulogd-2.0.7-x86_64-1.txz:  Upgraded.
n/whois-5.3.1-x86_64-1.txz:  Upgraded.
xap/network-manager-applet-1.8.12-x86_64-1.txz:  Upgraded.
xap/vim-gvim-8.1.0026-x86_64-1.txz:  Upgraded.

11 files changed, 209 insertions, 0 deletions

diff --git a/source/k/slack-desc/slack-desc.kernel-generic-smp.i686 b/source/k/slack-desc/slack-desc.kernel-generic-smp.i686
new file mode 100644
index 00000000..a6abc770
--- /dev/null
+++ b/source/k/slack-desc/slack-desc.kernel-generic-smp.i686
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+                  |-----handy-ruler------------------------------------------------------|
+kernel-generic-smp: kernel-generic-smp (a general purpose SMP Linux kernel)
+kernel-generic-smp:
+kernel-generic-smp: This is a Linux kernel with built-in support for most disk
+kernel-generic-smp: controllers. To use filesystems, or to load support for a SCSI or
+kernel-generic-smp: other controller, then you'll need to load one or more kernel
+kernel-generic-smp: modules using an initial ramdisk, or initrd. For more information
+kernel-generic-smp: about creating an initrd, see the README.initrd file in the /boot
+kernel-generic-smp: directory.
+kernel-generic-smp:
+kernel-generic-smp: SMP is "Symmetric multiprocessing", or multiple CPU/core support.
+kernel-generic-smp:
diff --git a/source/k/slack-desc/slack-desc.kernel-generic.i586 b/source/k/slack-desc/slack-desc.kernel-generic.i586
new file mode 100644
index 00000000..1054d54c
--- /dev/null
+++ b/source/k/slack-desc/slack-desc.kernel-generic.i586
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+              |-----handy-ruler------------------------------------------------------|
+kernel-generic: kernel-generic (a general purpose single processor Linux kernel)
+kernel-generic:
+kernel-generic: A Linux kernel with built-in support for most disk controllers.
+kernel-generic: For filesystem support, or if you need to load support for a SCSI or
+kernel-generic: other controller, then you'll need to load one or more kernel modules
+kernel-generic: using an initial ramdisk, or initrd. For more information about
+kernel-generic: creating an initrd, see the README.initrd file in the /boot directory.
+kernel-generic:
+kernel-generic:
+kernel-generic:
+kernel-generic:
diff --git a/source/k/slack-desc/slack-desc.kernel-generic.x86_64 b/source/k/slack-desc/slack-desc.kernel-generic.x86_64
new file mode 100644
index 00000000..b1410c97
--- /dev/null
+++ b/source/k/slack-desc/slack-desc.kernel-generic.x86_64
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+              |-----handy-ruler------------------------------------------------------|
+kernel-generic: kernel-generic (a general purpose SMP Linux kernel)
+kernel-generic:
+kernel-generic: This is a Linux kernel with built-in support for most disk
+kernel-generic: controllers. To use filesystems, or to load support for a SCSI or
+kernel-generic: other controller, then you'll need to load one or more kernel
+kernel-generic: modules using an initial ramdisk, or initrd. For more information
+kernel-generic: about creating an initrd, see the README.initrd file in the /boot
+kernel-generic: directory.
+kernel-generic:
+kernel-generic: SMP is "Symmetric multiprocessing", or multiple CPU/core support.
+kernel-generic:
diff --git a/source/k/slack-desc/slack-desc.kernel-headers b/source/k/slack-desc/slack-desc.kernel-headers
new file mode 100644
index 00000000..511d5fdc
--- /dev/null
+++ b/source/k/slack-desc/slack-desc.kernel-headers
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+              |-----handy-ruler------------------------------------------------------|
+kernel-headers: kernel-headers (Linux kernel include files)
+kernel-headers:
+kernel-headers: These are the include files from the Linux kernel.
+kernel-headers:
+kernel-headers: You'll need these to compile most system software for Linux.
+kernel-headers:
+kernel-headers:
+kernel-headers:
+kernel-headers:
+kernel-headers:
+kernel-headers:
diff --git a/source/k/slack-desc/slack-desc.kernel-huge-smp.i686 b/source/k/slack-desc/slack-desc.kernel-huge-smp.i686
new file mode 100644
index 00000000..0757cea3
--- /dev/null
+++ b/source/k/slack-desc/slack-desc.kernel-huge-smp.i686
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+               |-----handy-ruler------------------------------------------------------|
+kernel-huge-smp: kernel-huge-smp (a fully-loaded SMP Linux kernel)
+kernel-huge-smp:
+kernel-huge-smp: This is a Linux kernel with built-in support for most disk
+kernel-huge-smp: controllers. If you're looking for a more stripped down kernel
+kernel-huge-smp: (this one contains everything but the kitchen sink ;-), then install
+kernel-huge-smp: the kernel-generic-smp in the /boot directory along with an initrd to
+kernel-huge-smp: load support for your boot device and filesystem. For instructions
+kernel-huge-smp: on the initrd, see README.initrd in the /boot directory.
+kernel-huge-smp:
+kernel-huge-smp: SMP is "Symmetric multiprocessing", or multiple CPU/core support.
+kernel-huge-smp:
diff --git a/source/k/slack-desc/slack-desc.kernel-huge.i586 b/source/k/slack-desc/slack-desc.kernel-huge.i586
new file mode 100644
index 00000000..1a5afb09
--- /dev/null
+++ b/source/k/slack-desc/slack-desc.kernel-huge.i586
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+           |-----handy-ruler------------------------------------------------------|
+kernel-huge: kernel-huge (a fully-loaded single processor Linux kernel)
+kernel-huge:
+kernel-huge: This is a Linux kernel with built-in support for most disk controllers
+kernel-huge: and filesystems. If you're looking for a more stripped down kernel
+kernel-huge: (this one contains everything but the kitchen sink ;-), then install
+kernel-huge: the kernel-generic from the /boot directory along with an initrd to
+kernel-huge: load support for your boot device and filesystem. For instructions
+kernel-huge: on the initrd, see README.initrd in the /boot directory.
+kernel-huge:
+kernel-huge:
+kernel-huge:
diff --git a/source/k/slack-desc/slack-desc.kernel-huge.x86_64 b/source/k/slack-desc/slack-desc.kernel-huge.x86_64
new file mode 100644
index 00000000..c15947b1
--- /dev/null
+++ b/source/k/slack-desc/slack-desc.kernel-huge.x86_64
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+           |-----handy-ruler------------------------------------------------------|
+kernel-huge: kernel-huge (a fully-loaded SMP Linux kernel)
+kernel-huge:
+kernel-huge: This is a Linux kernel with built-in support for most disk
+kernel-huge: controllers. If you're looking for a more stripped down kernel
+kernel-huge: (this one contains everything but the kitchen sink ;-), then install
+kernel-huge: the kernel-generic in the /boot directory along with an initrd to
+kernel-huge: load support for your boot device and filesystem. For instructions
+kernel-huge: on the initrd, see README.initrd in the /boot directory.
+kernel-huge:
+kernel-huge: SMP is "Symmetric multiprocessing", or multiple CPU/core support.
+kernel-huge:
diff --git a/source/k/slack-desc/slack-desc.kernel-modules-template b/source/k/slack-desc/slack-desc.kernel-modules-template
new file mode 100644
index 00000000..1338eb2c
--- /dev/null
+++ b/source/k/slack-desc/slack-desc.kernel-modules-template
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+              |-----handy-ruler------------------------------------------------------|
+%PACKAGE_NAME%: %PACKAGE_NAME% (Linux kernel modules)
+%PACKAGE_NAME%:
+%PACKAGE_NAME%: Kernel modules are pieces of code that can be loaded and unloaded into
+%PACKAGE_NAME%: the kernel upon demand. They extend the functionality of the kernel
+%PACKAGE_NAME%: without the need to reboot the system. These modules provide support
+%PACKAGE_NAME%: for hardware such as USB devices, RAID controllers, network
+%PACKAGE_NAME%: interfaces, and display devices, or add other additional capabilities
+%PACKAGE_NAME%: to the kernel.
+%PACKAGE_NAME%:
+%PACKAGE_NAME%:
+%PACKAGE_NAME%:
diff --git a/source/k/slack-desc/slack-desc.kernel-source b/source/k/slack-desc/slack-desc.kernel-source
new file mode 100644
index 00000000..cf254e74
--- /dev/null
+++ b/source/k/slack-desc/slack-desc.kernel-source
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in. You must make
+# exactly 11 lines for the formatting to be correct. It's also customary to
+# leave one space after the ':'.
+
+             |-----handy-ruler------------------------------------------------------|
+kernel-source: kernel-source (Linux kernel source)
+kernel-source:
+kernel-source: Source code for Linus Torvalds' Linux kernel.
+kernel-source:
+kernel-source: This is the complete and unmodified source code for the Linux kernel.
+kernel-source:
+kernel-source:
+kernel-source:
+kernel-source:
+kernel-source:
+kernel-source:
diff --git a/source/k/slack-desc/slack-desc.kernel-source.vanilla b/source/k/slack-desc/slack-desc.kernel-source.vanilla
new file mode 100644
index 00000000..cf254e74
--- /dev/null
+++ b/source/k/slack-desc/slack-desc.kernel-source.vanilla
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in. You must make
+# exactly 11 lines for the formatting to be correct. It's also customary to
+# leave one space after the ':'.
+
+             |-----handy-ruler------------------------------------------------------|
+kernel-source: kernel-source (Linux kernel source)
+kernel-source:
+kernel-source: Source code for Linus Torvalds' Linux kernel.
+kernel-source:
+kernel-source: This is the complete and unmodified source code for the Linux kernel.
+kernel-source:
+kernel-source:
+kernel-source:
+kernel-source:
+kernel-source:
+kernel-source:
diff --git a/source/k/slack-desc/slack-desc.kernel-template b/source/k/slack-desc/slack-desc.kernel-template
new file mode 100644
index 00000000..a2880bb2
--- /dev/null
+++ b/source/k/slack-desc/slack-desc.kernel-template
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+              |-----handy-ruler------------------------------------------------------|
+%PACKAGE_NAME%: %PACKAGE_NAME% (a Linux kernel)
+%PACKAGE_NAME%:
+%PACKAGE_NAME%: This is a Linux kernel with built-in support for most disk
+%PACKAGE_NAME%: controllers. To use filesystems, or to load support for a SCSI or
+%PACKAGE_NAME%: other controller, then you'll need to load one or more kernel
+%PACKAGE_NAME%: modules using an initial ramdisk, or initrd. For more information
+%PACKAGE_NAME%: about creating an initrd, see the README.initrd file in the /boot
+%PACKAGE_NAME%: directory.
+%PACKAGE_NAME%:
+%PACKAGE_NAME%:
+%PACKAGE_NAME%: