Slackware 13.0slackware-13.0

Wed Aug 26 10:00:38 CDT 2009
Slackware 13.0 x86_64 is released as stable!  Thanks to everyone who
helped make this release possible -- see the RELEASE_NOTES for the
credits.  The ISOs are off to the replicator.  This time it will be a
6 CD-ROM 32-bit set and a dual-sided 32-bit/64-bit x86/x86_64 DVD.
We're taking pre-orders now at store.slackware.com.  Please consider
picking up a copy to help support the project.  Once again, thanks to
the entire Slackware community for all the help testing and fixing
things and offering suggestions during this development cycle.
As always, have fun and enjoy!  -P.

7 files changed, 2412 insertions, 0 deletions

diff --git a/source/l/ncurses/Eterm.ti b/source/l/ncurses/Eterm.ti
new file mode 100644
index 00000000..b711cb92
--- /dev/null
+++ b/source/l/ncurses/Eterm.ti
@@ -0,0 +1,150 @@
+# Eterm terminfo file
+
+Eterm|Eterm Terminal Emulator (X11 Window System),
+# FIXME:  xterm does not specify bce, bw, eo, or xon.  Should we?
+	am, bw, bce, km, mir, msgr, xenl, xon, eo, mc5i,
+	cols#80, lines#24, it#8, lm#0, btns#5,
+	cr=\r, bel=^G,
+	colors#8, pairs#64,
+
+# Scroll text down/up one line
+	ind=\n, ri=\eM,
+
+# Clear entire screen (home, then clear to EOS), EOS, EOL, BOL
+	clear=\e[H\e[2J, ed=\e[J, el=\e[K, el1=\e[1K,
+
+# Change scrolling region to lines $1+1 to $2+1
+# %i means add one to params 1 and 2; convert from 0-based to
+# 1-based counting.
+	csr=\e[%i%p1%d;%p2%dr,
+
+# Move cursor to row $1+1, column $2+1.  Can end with H or f
+	cup=\e[%i%p1%d;%p2%dH,
+# Move cursor to column n, same row; or row n, same column
+	hpa=\e[%i%p1%dG, vpa=\e[%i%p1%dd,
+# Move cursor up/down/forward/back by n chars
+	cuu=\e[%p1%dA, cud=\e[%p1%dB, cuf=\e[%p1%dC, cub=\e[%p1%dD,
+# Move cursor up/down/forward/back by 1 char
+	cuu1=\e[A,     cud1=\e[B,       cuf1=\e[C,     cub1=\b,
+# Home cursor (row 1, col 1).  Was \e[1;1H but 1's are redundant
+	home=\e[H,
+
+# Enter/leave insert mode
+	smir=\e[4h, rmir=\e[4l,
+
+# Set tab stops, clear tab stops, tab character
+	hts=\eH, tbc=\e[3g, ht=\t,
+
+# Turn on/off auto margins
+	smam=\e[?7h, rmam=\e[?7l,
+# Make cursor invisible, normal  (bold cursor cvvis not supported)
+	civis=\e[?25l, cnorm=\e[?25h,
+# Save/restore cursor position
+	sc=\e7, rc=\e8,
+
+# Alternate character set (line drawing), enable/enter/exit ACS
+	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+# The line below is used by some vtXXX emulators, but I don't think it's right for us.
+#	acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
+	enacs=\e)0, smacs=^N, rmacs=^O,
+
+# Delete/insert n chars, 1 char
+	dch=\e[%p1%dP, ich=\e[%p1%d@, dch1=\e[P, ich1=\e[@,
+# Delete/insert n lines, 1 line
+	dl=\e[%p1%dM, il=\e[%p1%dL, dl1=\e[M, il1=\e[L,
+# Erase next n chars
+	ech=\e[%p1%dX,
+
+# Activate SGR mode:  bold, reverse video, blink (bright bg color)
+	bold=\e[1m, rev=\e[7m, blink=\e[5m,
+# Start/stop underline, standout (reverse video)
+	smul=\e[4m, rmul=\e[24m, smso=\e[7m, rmso=\e[27m,
+# Turn off all attributes (exit_attribute_mode)
+	sgr0=\e[m^O,
+# Flash the screen (sets and resets reverse video for the whole screen)
+	flash=\e[?5h\e[?5l,
+
+# Enter/leave application keypad mode.  We always send the ANSI values
+# because that seems to be the most portable solution.  The valid escape
+# sequences are here but are commented out for this reason. The 1st set
+# is for keypad cursor keys, the second is for application cursor key
+# mode.  The third is what gets sent by default.
+##	smkx=\e=, rmkx=\e>,
+	smkx=, rmkx=,
+##	kcuu1=\e[Ox, kcud1=\e[Or, kcuf1=\e[Ov, kcub1=\e[Ot,
+##	kcuu1=\eOA, kcud1=\eOB, kcuf1=\eOC, kcub1=\eOD,
+	kcuu1=\e[A, kcud1=\e[B, kcuf1=\e[C, kcub1=\e[D,
+
+# Keypad 7, 9, 5, 1, and 3.  The 1st set are the appl. keypad mode
+# sequences.  The 2nd set are the values for Home/End/PgUp/PgDn.
+# The 5 key is the same either way.
+##	ka1=\eOw, ka3=\eOy, kb2=\eOu, kc1=\eOq, kc3=\eOs,
+	ka1=\e[7~, ka3=\e[5~, kb2=\eOu, kc1=\e[8~, kc3=\e[6~,
+
+# Function keys
+	kf1=\e[11~, kf2=\e[12~, kf3=\e[13~, kf4=\e[14~, kf5=\e[15~,
+	kf6=\e[17~, kf7=\e[18~, kf8=\e[19~, kf9=\e[20~, kf10=\e[21~,
+	kf11=\e[23~, kf12=\e[24~, kf13=\e[25~, kf14=\e[26~, kf15=\e[28~,
+	kf16=\e[29~, kf17=\e[31~, kf18=\e[32~, kf19=\e[33~, kf20=\e[34~,
+
+# Find, Insert, Delete, Select, Prior (PgUp), Next (PgDn).  The first set of
+# sequences are accurate.  The second set lets Find/Select act like Home/End.
+	kfnd=\e[1~, kich1=\e[2~, kdch1=\e[3~, kslt=\e[4~, kpp=\e[5~, knp=\e[6~,
+##	kfnd=\e[7~, kich1=\e[2~, kdch1=\e[3~, kslt=\e[8~, kpp=\e[5~, knp=\e[6~,
+
+# Home (vt100 may use khome=\e[H), End, Backspace, Keypad Enter, Shift-Tab
+# The 1st set is the default.  The 2nd set is based on Linux console/vt220
+# settings for Home/End and Backspace sending Delete (^?).  The 3rd set gives
+# xterm's settings for Home/End.
+	khome=\e[7~, kend=\e[8~, kbs=\010, kent=\eOM, kcbt=\e[Z,
+##	khome=\e[1~, kend=\e[4~, kbs=\177, kent=\eOM, kcbt=\e[Z,
+##	khome=\e[H, kend=\e[F, kbs=\010, kent=\eOM, kcbt=\e[Z,
+
+# Help and Begin keys
+	khlp=\e[28~, kbeg=\eOu,
+# "Shifted" right and left (actually Ctrl, not Shift)
+	kRIT=\e[c, kLFT=\e[d,
+# Shift-Prior/Next (PgUp/PgDn).  Usually, these key combos scroll.
+	kPRV=\e[5$, kNXT=\e[6$,
+# Shift-Delete/Home/End and Ctrl-End.  It's a $ instead of a ~ for
+# Shift-, a ^ for Ctrl-, and @ for Ctrl-Shift-.
+	kDC=\e[3$, kHOM=\e[7$, kEND=\e[8$, kel=\e[8\^,
+
+# Reset terminal, turn off all attributes
+	rs1=\e>\e[1;3;4;5;6l\e[?7h\e[m\e[r\e[2J\e[H,
+	rs2=\e[r\e[m\e[2J\e[H\e[?7h\e[?1;3;4;6l\e[4l\e>,
+# Init terminal
+	is1=\e[?47l\e>\e[?1l,
+	is2=\e[r\e[m\e[2J\e[H\e[?7h\e[?1;3;4;6l\e[4l,
+
+# Enter/leave cursor address mode.  The 1st set uses the
+# secondary screen.  The 2nd one doesn't.
+	smcup=\e7\e[?47h, rmcup=\e[2J\e[?47l\e8,
+##	smcup=\e7, rmcup=\e8,
+
+# Start/stop redirection to the printpipe
+	mc4=\e[4i, mc5=\e[5i,
+
+# User-defined string capabilities
+# Cursor Position Report (CPR)
+	u6=\e[%i%d;%dR,
+# Report current screen position (DSR 6) (replies with u6)
+	u7=\e[6n,
+# vt100 answerback
+	u8=\e[?1;2c,
+# Request identity (replies with u8)  If VT100_ANS is enabled, use
+# the first value.  If ENQ_ANS is enabled, use the second value.
+	u9=\e[c,
+##	u9=^E,
+
+# Add ANSI color support
+ 	sgr=\e[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t^N%e^O%;,
+##	sgr=\e[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m,
+
+# Mouse info packet introducer
+	kmous=\e[M,
+
+# Revert to the original foreground/background pair
+	op=\e[39;49m,
+# Set foreground color, background color
+	setaf=\e[3%p1%dm, setab=\e[4%p1%dm,
diff --git a/source/l/ncurses/ncurses.SlackBuild b/source/l/ncurses/ncurses.SlackBuild
new file mode 100755
index 00000000..9da59f1e
--- /dev/null
+++ b/source/l/ncurses/ncurses.SlackBuild
@@ -0,0 +1,165 @@
+#!/bin/sh
+
+# Copyright 2000-2009  Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+VERSION=5.7
+ARCH=${ARCH:-x86_64}
+BUILD=${BUILD:-2}
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-ncurses
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  X86_64OPTS=" --with-chtype=long --with-mmask-t=long "
+  LIBDIRSUFFIX="64"
+fi
+
+ncurses_configure() {
+CFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --with-gpm \
+  --disable-termcap \
+  --with-normal \
+  --with-shared \
+  --enable-symlinks \
+  --without-debug \
+  --without-profile \
+  --without-ada \
+  $X86_64OPTS \
+  --program-suffix="" \
+  --program-prefix="" \
+  $WIDEC \
+  $ARCH-slackware-linux
+}
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+cd $TMP
+rm -rf ncurses-$VERSION
+tar xvf $CWD/ncurses-$VERSION.tar.gz || exit 1
+cd ncurses-$VERSION || exit 1
+chown -R root:root .
+if [ ! -z "$(ls $CWD/patches/ncurses*bz2)" ]; then
+  bzcat $CWD/patches/ncurses*bz2 > tmp-patch.sh
+  bash tmp-patch.sh || exit 1
+fi
+for file in $CWD/patches/ncurses-$VERSION-2*.patch.gz ; do
+  zcat $file | patch -p1 --verbose || exit 1
+done
+zcat $CWD/ncurses.mkhashsize.diff.gz | patch -p1 --verbose || exit 1
+ncurses_configure
+make -j4 || exit 1
+# Spamming the partition.
+# Sorry, but it's about the only way to get a good 'tic'.
+make install
+# Install the package:
+make install DESTDIR=$PKG
+
+# Build/install again with wide character support:
+make clean
+WIDEC=--enable-widec
+ncurses_configure
+make -j4 || exit 1
+make install
+make install DESTDIR=$PKG
+
+if [ ! -d $PKG/usr/include/ncursesw -a ! -L $PKG/usr/include/ncursesw ]; then
+  ( cd $PKG/usr/include ; ln -sf ncurses ncursesw )
+fi
+
+# Strip stuff:
+find $PKG | xargs file | grep -e "executable" -e "shared object" \
+  | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+
+# Move the include files from /usr/include into
+# /usr/include/ncurses, then make symlinks back
+# into /usr/include.
+( cd $PKG/usr/include
+  rm -rf ncurses
+  mkdir ncurses
+  mv *.h ncurses
+  for file in ncurses/* ; do
+    ln -sf $file .
+  done
+  # This shouldn't clobber the real one:
+  mv termcap.h termcap-ncurses.h
+)
+
+# Move the ncurses libraries into /lib, since they're important:
+mkdir -p $PKG/lib${LIBDIRSUFFIX}
+( cd $PKG/usr/lib${LIBDIRSUFFIX}
+  chmod 755 *.so
+  chmod 644 *.a
+  mv libncurses.so.5* $PKG/lib${LIBDIRSUFFIX}
+  mv libncursesw.so.5* $PKG/lib${LIBDIRSUFFIX}
+  rm -f libncurses.so
+  ln -sf /lib${LIBDIRSUFFIX}/libncurses.so.5 libncurses.so
+  rm -f libncursesw.so
+  ln -sf /lib${LIBDIRSUFFIX}/libncursesw.so.5 libncursesw.so
+  # Olde obsolete names, just in case
+  rm -f libcurses.so
+  ln -sf libncurses.so libcurses.so
+  rm -f libcursesw.so
+  ln -sf libncursesw.so libcursesw.so
+)
+
+# Set TERMINFO to point to the package:
+export TERMINFO=$PKG/usr/share/terminfo
+# Fix the xterm, screen, rxvt, and Eterm entries:
+for tfile in $CWD/xterm.terminfo $CWD/screeninfo.src $CWD/rxvt.terminfo $CWD/Eterm.ti ; do
+  if [ -r $tfile ]; then
+    progs/tic -v $tfile
+  fi
+done
+unset TERMINFO
+
+# Then, add /usr/doc/ncurses-xxxxx with appropriate files.
+mkdir -p $PKG/usr/doc/ncurses-$VERSION
+cp -a \
+  ANNOUNCE INSTALL MANIFEST NEWS README* TO-DO \
+  $PKG/usr/doc/ncurses-$VERSION
+mkdir -p $PKG/usr/doc/ncurses-$VERSION/c++
+cp -a \
+  c++/NEWS c++/PROBLEMS c++/README-first \
+  $PKG/usr/doc/ncurses-$VERSION/c++
+if [ -r $PKG/usr/man/man1/tack.1 ]; then
+  gzip -9 --force $PKG/usr/man/man1/tack.1
+fi
+
+# desc file:
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/ncurses-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/source/l/ncurses/ncurses.mkhashsize.diff b/source/l/ncurses/ncurses.mkhashsize.diff
new file mode 100644
index 00000000..7694a39d
--- /dev/null
+++ b/source/l/ncurses/ncurses.mkhashsize.diff
@@ -0,0 +1,11 @@
+--- ./include/MKhashsize.sh.orig	2006-10-21 19:45:39.000000000 -0500
++++ ./include/MKhashsize.sh	2006-12-27 17:21:06.000000000 -0600
+@@ -35,7 +35,7 @@
+ echo " */"
+ 
+ CAPS="${1-Caps}"
+-TABSIZE=`grep -v '^[ #]' $CAPS | grep -v "^$" | grep -v "^capalias"| grep -v "^infoalias" | wc -l`
++TABSIZE=$(grep -v '^[ #]' $CAPS | grep -v "^$" | grep -v "^capalias"| grep -v "^infoalias" | wc -l)
+ 
+ echo ""
+ echo "#define CAPTABSIZE	${TABSIZE}"
diff --git a/source/l/ncurses/rxvt.terminfo b/source/l/ncurses/rxvt.terminfo
new file mode 100644
index 00000000..cda90182
--- /dev/null
+++ b/source/l/ncurses/rxvt.terminfo
@@ -0,0 +1,55 @@
+# From: Thomas Dickey <dickey@clark.net> 04 Oct 1997
+# Updated: Özgür Kesim <kesim@math.fu-berlin.de> 02 Nov 1997
+# Notes:
+# rxvt 2.21b uses
+#       smacs=\E(B\E)U^N, rmacs=\E(B\E)0^O,
+# but some applications don't work with that.
+# It also has an AIX extension
+#       box2=lqkxjmwuvtn,
+# and
+#       ech=\E[%p1%dX,
+# but the latter does not work correctly.
+#
+# rxvt is normally configured to look for "xterm" or "xterm-color" as $TERM.
+# Since rxvt is not really compatible with xterm, it should be configured as
+# "rxvt-basic" (monochrom) and "rxvt"
+rxvt-basic|rxvt terminal base (X Window System), 
+        am, bce, eo, km, msgr, xenl, xon, 
+        cols#80, it#8, lines#24, 
+        acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 
+        bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, 
+        clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M, 
+        csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 
+        cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 
+        cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 
+        cvvis=\E[?25h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, 
+        dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0, 
+        flash=\E[?5h\E[?5l, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, 
+        hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, 
+        ind=^J, is1=\E[?47l\E=\E[?1l, 
+        is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, 
+        kDC=\E[3$, kEND=\E[8$, kHOM=\E[7$, kLFT=\E[d, kNXT=\E[6$, 
+        kPRV=\E[5$, kRIT=\E[c, ka1=\EOw, ka3=\EOy, kb2=\EOu, kbs=^H, 
+        kc1=\EOq, kc3=\EOs, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, 
+        kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kel=\E[8\^, 
+        kend=\E[8~, kent=\EOM, kf0=\E[21~, kf1=\E[11~, kf10=\E[21~, 
+        kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, 
+        kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, 
+        kf19=\E[33~, kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, 
+        kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, 
+        kf9=\E[20~, kfnd=\E[1~, khome=\E[7~, kich1=\E[2~, 
+        kmous=\E[M, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, rc=\E8, 
+        rev=\E[7m, ri=\EM, rmacs=^O, rmcup=\E[?47l\E8,
+        rmkx=\E>, rmso=\E[27m, rmul=\E[24m, 
+        rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H, 
+        rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>, 
+        s0ds=\E(B, s1ds=\E(0, sc=\E7,
+        sgr0=\E[m\017,
+        smacs=^N, smcup=\E7\E[?47h, 
+        smkx=\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, 
+        vpa=\E[%i%p1%dd, 
+rxvt|rxvt terminal emulator (X Window System), 
+        colors#8, pairs#64, 
+        op=\E[39;49m, setab=\E[%p1%{40}%+%dm, 
+        setaf=\E[%p1%{30}%+%dm,
+        use=rxvt-basic, 
diff --git a/source/l/ncurses/screeninfo.src b/source/l/ncurses/screeninfo.src
new file mode 100644
index 00000000..c6ca4d95
--- /dev/null
+++ b/source/l/ncurses/screeninfo.src
@@ -0,0 +1,73 @@
+screen|VT 100/ANSI X3.64 virtual terminal,
+	am, km, mir, msgr, xenl,
+	cols#80, it#8, lines#24, colors#8, pairs#64,
+	bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
+	clear=\E[H\E[J, cr=\r, csr=\E[%i%p1%d;%p2%dr,
+	cub=\E[%p1%dD, cub1=\b, cud=\E[%p1%dB, cud1=\n,
+	cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
+	cuu=\E[%p1%dA, cuu1=\EM, dch=\E[%p1%dP, dch1=\E[P,
+	dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
+	enacs=\E(B\E)0, home=\E[H,
+	ht=\t, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
+	ind=\n, is2=\E)0, kcub1=\EOD, kcud1=\EOB,
+	kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~, kf1=\EOP,
+	kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\EOQ,
+	kf3=\EOR, kf4=\EOS, kf5=\E[15~, kf6=\E[17~,
+	kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kend=\E[4~,
+	kich1=\E[2~, knp=\E[6~, kpp=\E[5~, nel=\EE,
+	rc=\E8, rev=\E[7m, ri=\EM, rmcup=\E[?1049l, rmir=\E[4l,
+	rmkx=\E[?1l\E>, rmso=\E[23m, rmul=\E[24m, rs2=\Ec, sc=\E7,
+	sgr0=\E[m, smcup=\E[?1049h, smir=\E[4h, smkx=\E[?1h\E=,
+	smso=\E[3m, smul=\E[4m, tbc=\E[3g, smacs=^N, rmacs=^O, flash=\Eg, 
+	civis=\E[?25l, cnorm=\E[34h\E[?25h, cvvis=\E[34l,
+	op=\E[39;49m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
+	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~..--++\054\054hhII00,
+screen-bce|VT 100/ANSI X3.64 virtual terminal with bce,
+	am, bce, km, mir, msgr, xenl,
+	cols#80, it#8, lines#24, colors#8, pairs#64,
+	bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
+	clear=\E[H\E[J, cr=\r, csr=\E[%i%p1%d;%p2%dr,
+	cub=\E[%p1%dD, cub1=\b, cud=\E[%p1%dB, cud1=\n,
+	cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
+	cuu=\E[%p1%dA, cuu1=\EM, dch=\E[%p1%dP, dch1=\E[P,
+	dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
+	enacs=\E(B\E)0, home=\E[H,
+	ht=\t, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
+	ind=\n, is2=\E)0, kcub1=\EOD, kcud1=\EOB,
+	kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~, kf1=\EOP,
+	kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\EOQ,
+	kf3=\EOR, kf4=\EOS, kf5=\E[15~, kf6=\E[17~,
+	kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kend=\E[4~,
+	kich1=\E[2~, knp=\E[6~, kpp=\E[5~, nel=\EE,
+	rc=\E8, rev=\E[7m, ri=\EM, rmcup=\E[?1049l, rmir=\E[4l,
+	rmkx=\E[?1l\E>, rmso=\E[23m, rmul=\E[24m, rs2=\Ec, sc=\E7,
+	sgr0=\E[m, smcup=\E[?1049h, smir=\E[4h, smkx=\E[?1h\E=,
+	smso=\E[3m, smul=\E[4m, tbc=\E[3g, smacs=^N, rmacs=^O, flash=\Eg, 
+	civis=\E[?25l, cnorm=\E[34h\E[?25h, cvvis=\E[34l,
+	op=\E[39;49m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
+	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~..--++\054\054hhII00,
+screen-s|VT 100/ANSI X3.64 virtual terminal with hardstatus line,
+	am, bce, km, mir, msgr, xenl,
+	cols#80, it#8, lines#24, colors#8, pairs#64,
+	bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
+	clear=\E[H\E[J, cr=\r, csr=\E[%i%p1%d;%p2%dr,
+	cub=\E[%p1%dD, cub1=\b, cud=\E[%p1%dB, cud1=\n,
+	cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
+	cuu=\E[%p1%dA, cuu1=\EM, dch=\E[%p1%dP, dch1=\E[P,
+	dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
+	enacs=\E(B\E)0, home=\E[H,
+	ht=\t, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
+	ind=\n, is2=\E)0, kcub1=\EOD, kcud1=\EOB,
+	kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~, kf1=\EOP,
+	kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\EOQ,
+	kf3=\EOR, kf4=\EOS, kf5=\E[15~, kf6=\E[17~,
+	kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kend=\E[4~,
+	kich1=\E[2~, knp=\E[6~, kpp=\E[5~, nel=\EE,
+	rc=\E8, rev=\E[7m, ri=\EM, rmcup=\E[?1049l, rmir=\E[4l,
+	rmkx=\E[?1l\E>, rmso=\E[23m, rmul=\E[24m, rs2=\Ec, sc=\E7,
+	sgr0=\E[m, smcup=\E[?1049h, smir=\E[4h, smkx=\E[?1h\E=,
+	smso=\E[3m, smul=\E[4m, tbc=\E[3g, smacs=^N, rmacs=^O, flash=\Eg, 
+	tsl=\E_, fsl=\E\\, dsl=\E_\E\\,
+	civis=\E[?25l, cnorm=\E[34h\E[?25h, cvvis=\E[34l,
+	op=\E[39;49m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
+	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~..--++\054\054hhII00,
diff --git a/source/l/ncurses/slack-desc b/source/l/ncurses/slack-desc
new file mode 100644
index 00000000..c24cc25b
--- /dev/null
+++ b/source/l/ncurses/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+       |-----handy-ruler------------------------------------------------------|
+ncurses: ncurses (CRT screen handling and optimization package)
+ncurses:
+ncurses: The ncurses (new curses) library is a free software emulation of
+ncurses: curses in System V Release 4.0, and more.  It uses terminfo format,
+ncurses: supports pads and color and multiple highlights and forms characters
+ncurses: and function-key mapping, and has all the other SYSV-curses
+ncurses: enhancements over BSD curses.
+ncurses:
+ncurses:
+ncurses:
+ncurses:
diff --git a/source/l/ncurses/xterm.terminfo b/source/l/ncurses/xterm.terminfo
new file mode 100644
index 00000000..88bee44f
--- /dev/null
+++ b/source/l/ncurses/xterm.terminfo
@@ -0,0 +1,1939 @@
+# $XTermId: terminfo,v 1.155 2007/11/11 23:26:52 tom Exp $
+#
+# $XFree86: xc/programs/xterm/terminfo,v 3.59 2006/02/13 01:14:59 dickey Exp $
+#
+# Updates/notes/new entries (e.g., xterm-8bit, xterm-16color, xterm-256color)
+# - Thomas E. Dickey
+#
+#------------------------------------------------------------------------------
+# Copyright 1996-2006,2007 by Thomas E. Dickey
+#
+#                         All Rights Reserved
+#
+# Permission is hereby granted, free of charge, to any person obtaining a
+# copy of this software and associated documentation files (the
+# "Software"), to deal in the Software without restriction, including
+# without limitation the rights to use, copy, modify, merge, publish,
+# distribute, sublicense, and/or sell copies of the Software, and to
+# permit persons to whom the Software is furnished to do so, subject to
+# the following conditions:
+#
+# The above copyright notice and this permission notice shall be included
+# in all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+# OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+# IN NO EVENT SHALL THE ABOVE LISTED COPYRIGHT HOLDER(S) BE LIABLE FOR ANY
+# CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
+# TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
+# SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+#
+# Except as contained in this notice, the name(s) of the above copyright
+# holders shall not be used in advertising or otherwise to promote the
+# sale, use or other dealings in this Software without prior written
+# authorization.
+#------------------------------------------------------------------------------
+#
+# Special Capabilities:
+# --------------------
+# ich has a corresponding capability that inserts a single blank.  We could
+#	have used ich1=\E[@, which works with ncurses, but that is not standard
+#	behavior.  If it is set, then SVr4 vi (e.g., Solaris 2.6) emits both
+#	smir/rmir and ich1.
+# meml locks memory above the cursor; memu unlocks (ala HP terminals).  This
+#	is not recognized by some older (e.g., SVr3) tic programs, but none
+#	do more than warn about it.  Ignore the warning.
+# smcup clears memory before switching to the alternate screen.  The older
+#	(deprecated) \E[?47h did not do this, requiring applications to
+#	embed a \E[2J in the rmcup string.  However, that behavior cannot
+#	be disabled via titeInhibit, making that resource not function as
+#	intended on systems with terminfo.
+# rs2/is2 are shorter with XFree86 xterm because it supports DECSTR.  We
+#	use the shorter sequence for compatibility with the termcap, which
+#	is trimmed to keep it shorter than 1023 characters.  It (escape \E[!p)
+#	replaces these in the conventional vt100 reset-string:
+#		\E7	- save cursor (fixes origin-mode side-effect)
+#		\E[r	- reset scrolling margins
+#		\E[m	- reset SGR (including color)
+#		\E[?7h	- reset wraparound mode (DECAWM)
+#		\E[?1l	- reset application cursor keys (DECCKM)
+#		\E[?6l	- reset origin mode (DECOM)
+#		\E8	- restore cursor
+#	DECSTR is recognized by XFree86 xterm even in vt52 mode.
+#
+# Editing Keypad:
+# --------------
+# XFree86 xterm emulates vt220 if the decTerminalID resource is set to 200 or
+# higher.  Otherwise it emulates a vt100 or vt52 depending on the value of the
+# resource.  When emulating a vt220, we support the editing keypad.  Sun and PC
+# keyboards have an editing keypad which is similar to the vt220:
+#
+#	VT220 editing keypad
+#	----------------------------
+#	Find      Insert      Remove
+#	Select    Prev        Next
+#	----------------------------
+#
+#	Sun/PC editing keypad
+#	----------------------------
+#	Insert    Home        PageUp
+#	Delete    End         PageDn
+#	----------------------------
+#
+# If the sunKeyboard resource is true, we map it this way (adjusting the values
+# of Home, End and Delete):
+#	VT220		      Sun/PC
+#	----------------------------
+#	Find		      Home
+#	Select		      End
+#	Insert		      Insert
+#	Remove		      Delete
+#	Prev		      PageUp
+#	Next		      PageDn
+#	----------------------------
+#
+# Note that all of the keys on the editing keypad transmit escape sequences.  A
+# vt220 does this only when in vt220 mode; when emulating a vt100 the editing
+# keypad is inactive.
+#
+# Alternative keycodes:
+# --------------------
+# Several of the function keys have alternative names, depending on the type of
+# host which your xterm is connected to.  DEC (i.e., the VMS system) uses F15
+# as the HELP key, F16 as the DO key.  Unix applications generally do not do
+# this.  Curses applications in particular, assign a unique keycode to each
+# capability string.  These terminal descriptions do not have conflicting
+# definitions, to ensure that Unix curses applications use a consistent set of
+# keycodes.  To get a VMS-bias, make these substitutions:
+#	1. change khome to kfnd
+#	2. change kend to kslt
+# The original xterm-r6 entry does in fact have a VMS bias.
+#
+# Some legacy applications using the termcap emulation may expect kll where
+# we have specified kend.
+#
+# Function keys with modifiers (Sun/PC):
+# -------------------------------------
+#	Shift-Fx          - kf{12+x}
+#	Control-Fx        - kf{24+x}
+#	Shift-Control-Fx  - kf{36+x}
+#
+# The terminfo defines some special keys which are documented as "shifted",
+# e.g., kDC is shifted-delete-character.
+#
+# Note however, that even though the terminfo says a key might be sent, there
+# may be conflicts which prevent this.  For example, it is common to use
+# shifted pageup and pagedown for window manager functions.  The default
+# translation for xterm since X11R4 has overridden shifted Insert, Select,
+# PageUp and PageDown, which correspond to terminfo kIC, kEND, kPRV and kNXT
+# respectively.
+#
+xterm-new|modern xterm terminal emulator,
+	npc,
+	indn=\E[%p1%dS,
+	kb2=\EOE,
+	kcbt=\E[Z,
+	kent=\EOM,
+	rin=\E[%p1%dT,
+	use=xterm+pcfkeys,
+	use=xterm-basic,
+#
+# Encode modifiers using parameters (see "Xterm Control Sequences" ctlseqs.ms).
+# Note that this is unrelated to PCTERM.
+#
+# Some names are extensions allowed by ncurses, e.g.,
+#	kDN, kDN5, kDN6, kLFT5, kLFT6, kRIT5, kRIT6, kUP, kUP5, kUP6
+#
+# The uppercase names are made up, since there are no standards that apply.
+# If they were limited to two characters, they could in principle be translated
+# to termcap.  However, termcap sizes are limited to 1023 bytes, so there is
+# little point in ensuring that extended key names can be translated to
+# termcap.  A terminfo file can be up to 4096 bytes; using all extended keys
+# that xterm can generate would in fact exceed that limit.
+#
+# The numbers correspond to the modifier parameters documented in Xterm
+# Control Sequences:
+#
+#	2	Shift
+#	3	Alt
+#	4	Shift + Alt
+#	5	Control
+#	6	Shift + Control
+#	7	Alt + Control
+#	8	Shift + Alt + Control
+#
+# X/Open Curses defines some shift combinations, which are also used here
+# where applicable.  Since it does define some shift combinations, no number
+# (2) is used for suffixing the made-up names.  Some combinations are not
+# useful, e.g., they may reboot your computer, or they may require too many
+# fingers.  I stopped at modifier 7, just to keep things simple -TD
+#
+# XTerm resources:
+# ---------------
+# The xterm+pcfn, xterm+pcf0, xterm+pcf1, xterm+pcf2 and xterm+pcf3 fragments
+# correspond to default resource settings for xterm on a 104-key PC keyboard
+# with 12 function-keys:
+#
+#	*sunKeyboard:false
+#	*oldXtermFKeys:false
+#	*modifyCursorKeys:2
+#	*modifyFunctionKeys:2
+#	*ctrlFKeys:10
+#
+# The key numbers are computed based on the modifiers:
+#
+#	kf1-kf12 are F1-F12
+#	kf13-kf24 are shift F1-F12
+#	kf25-kf36 are control F1-F12
+#	kf37-kf48 are control+shift F1-F12
+#	kf49-kf60 are alt F1-F12
+#	kf61-kf63 are shift-alt F1-F3
+#
+# Note that ncurses would allow definition of kf64 and beyond, if there were
+# an application that required it.
+#
+xterm+pcfkeys|fragment for PC-style keys,
+	use=xterm+app,
+	use=xterm+pcf2,
+	use=xterm+pce2,
+	use=xterm+pcc2,
+#
+# The ctrlFKeys resource is only relevant to the xterm+pcfn and xterm+pcfN
+# entries, since the modifyFunctionKeys resource overrides ctrlFKeys when it is
+# positive.  A different choice of ctrlFKeys would give a different set of
+# function-key strings.
+xterm+pcfn|fragment with modifyFunctionKeys:-1 and ctrlFKeys:10,
+	kf1=\EOP,
+	kf10=\E[21~,
+	kf11=\E[23~,
+	kf12=\E[24~,
+	kf13=\E[25~,
+	kf14=\E[26~,
+	kf15=\E[28~,
+	kf16=\E[29~,
+	kf17=\E[31~,
+	kf18=\E[32~,
+	kf19=\E[33~,
+	kf2=\EOQ,
+	kf20=\E[34~,
+	kf21=\E[42~,
+	kf22=\E[43~,
+	kf23=\E[44~,
+	kf24=\E[45~,
+	kf25=\E[46~,
+	kf26=\E[47~,
+	kf27=\E[48~,
+	kf28=\E[49~,
+	kf29=\E[50~,
+	kf3=\EOR,
+	kf30=\E[51~,
+	kf31=\E[52~,
+	kf32=\E[53~,
+	kf33=\E[54~,
+	kf34=\E[55~,
+	kf35=\E[56~,
+	kf36=\E[57~,
+	kf37=\E[58~,
+	kf38=\E[59~,
+	kf39=\E[60~,
+	kf4=\EOS,
+	kf40=\E[61~,
+	kf41=\E[62~,
+	kf42=\E[63~,
+	kf43=\E[64~,
+	kf44=\E[65~,
+	kf45=\E[66~,
+	kf46=\E[67~,
+	kf47=\E[68~,
+	kf48=\E[69~,
+	kf5=\E[15~,
+	kf6=\E[17~,
+	kf7=\E[18~,
+	kf8=\E[19~,
+	kf9=\E[20~,
+
+# Changing ctrlFKeys to 12 would let us number the keys using just shift- and
+# control- modifiers:
+#	kf1-kf12 are F1-F12
+#	kf13-kf24 are shift F1-F12
+#	kf25-kf36 are control F1-F12
+#	kf37-kf48 are control+shift F1-F12
+xterm+pcfN|fragment with modifyFunctionKeys:-1 and ctrlFKeys:12,
+	kf1=\EOP,
+	kf10=\E[21~,
+	kf11=\E[23~,
+	kf12=\E[24~,
+	kf13=\E[25~,
+	kf14=\E[26~,
+	kf15=\E[28~,
+	kf16=\E[29~,
+	kf17=\E[31~,
+	kf18=\E[32~,
+	kf19=\E[33~,
+	kf2=\EOQ,
+	kf20=\E[34~,
+	kf21=\E[42~,
+	kf22=\E[43~,
+	kf23=\E[44~,
+	kf24=\E[45~,
+	kf25=\E[46~,
+	kf26=\E[47~,
+	kf27=\E[48~,
+	kf28=\E[49~,
+	kf29=\E[50~,
+	kf3=\EOR,
+	kf30=\E[51~,
+	kf31=\E[52~,
+	kf32=\E[53~,
+	kf33=\E[54~,
+	kf34=\E[55~,
+	kf35=\E[56~,
+	kf36=\E[57~,
+	kf37=\E[58~,
+	kf38=\E[59~,
+	kf39=\E[60~,
+	kf4=\EOS,
+	kf40=\E[61~,
+	kf41=\E[62~,
+	kf42=\E[63~,
+	kf43=\E[64~,
+	kf44=\E[65~,
+	kf45=\E[66~,
+	kf46=\E[67~,
+	kf47=\E[68~,
+	kf48=\E[69~,
+	kf5=\E[15~,
+	kf6=\E[17~,
+	kf7=\E[18~,
+	kf8=\E[19~,
+	kf9=\E[20~,
+
+xterm+pcf0|fragment with modifyFunctionKeys:0,
+	kf1=\EOP,
+	kf10=\E[21~,
+	kf11=\E[23~,
+	kf12=\E[24~,
+	kf13=\EO2P,
+	kf14=\EO2Q,
+	kf15=\EO2R,
+	kf16=\EO2S,
+	kf17=\E[15;2~,
+	kf18=\E[17;2~,
+	kf19=\E[18;2~,
+	kf2=\EOQ,
+	kf20=\E[19;2~,
+	kf21=\E[20;2~,
+	kf22=\E[21;2~,
+	kf23=\E[23;2~,
+	kf24=\E[24;2~,
+	kf25=\EO5P,
+	kf26=\EO5Q,
+	kf27=\EO5R,
+	kf28=\EO5S,
+	kf29=\E[15;5~,
+	kf3=\EOR,
+	kf30=\E[17;5~,
+	kf31=\E[18;5~,
+	kf32=\E[19;5~,
+	kf33=\E[20;5~,
+	kf34=\E[21;5~,
+	kf35=\E[23;5~,
+	kf36=\E[24;5~,
+	kf37=\EO6P,
+	kf38=\EO6Q,
+	kf39=\EO6R,
+	kf4=\EOS,
+	kf40=\EO6S,
+	kf41=\E[15;6~,
+	kf42=\E[17;6~,
+	kf43=\E[18;6~,
+	kf44=\E[19;6~,
+	kf45=\E[20;6~,
+	kf46=\E[21;6~,
+	kf47=\E[23;6~,
+	kf48=\E[24;6~,
+	kf49=\EO3P,
+	kf5=\E[15~,
+	kf50=\EO3Q,
+	kf51=\EO3R,
+	kf52=\EO3S,
+	kf53=\E[15;3~,
+	kf54=\E[17;3~,
+	kf55=\E[18;3~,
+	kf56=\E[19;3~,
+	kf57=\E[20;3~,
+	kf58=\E[21;3~,
+	kf59=\E[23;3~,
+	kf6=\E[17~,
+	kf60=\E[24;3~,
+	kf61=\EO4P,
+	kf62=\EO4Q,
+	kf63=\EO4R,
+	kf7=\E[18~,
+	kf8=\E[19~,
+	kf9=\E[20~,
+
+# This is almost the same as xterm+pcf2 because the unmodified keys all happen
+# to have a pattern that forces the modifier to the same position.
+xterm+pcf1|fragment with modifyFunctionKeys:1,
+	kf1=\EOP,
+	kf10=\E[21~,
+	kf11=\E[23~,
+	kf12=\E[24~,
+	kf13=\E[2P,
+	kf14=\E[2Q,
+	kf15=\E[2R,
+	kf16=\E[2S,
+	kf17=\E[15;2~,
+	kf18=\E[17;2~,
+	kf19=\E[18;2~,
+	kf2=\EOQ,
+	kf20=\E[19;2~,
+	kf21=\E[20;2~,
+	kf22=\E[21;2~,
+	kf23=\E[23;2~,
+	kf24=\E[24;2~,
+	kf25=\E[5P,
+	kf26=\E[5Q,
+	kf27=\E[5R,
+	kf28=\E[5S,
+	kf29=\E[15;5~,
+	kf3=\EOR,
+	kf30=\E[17;5~,
+	kf31=\E[18;5~,
+	kf32=\E[19;5~,
+	kf33=\E[20;5~,
+	kf34=\E[21;5~,
+	kf35=\E[23;5~,
+	kf36=\E[24;5~,
+	kf37=\E[6P,
+	kf38=\E[6Q,
+	kf39=\E[6R,
+	kf4=\EOS,
+	kf40=\E[6S,
+	kf41=\E[15;6~,
+	kf42=\E[17;6~,
+	kf43=\E[18;6~,
+	kf44=\E[19;6~,
+	kf45=\E[20;6~,
+	kf46=\E[21;6~,
+	kf47=\E[23;6~,
+	kf48=\E[24;6~,
+	kf49=\E[3P,
+	kf5=\E[15~,
+	kf50=\E[3Q,
+	kf51=\E[3R,
+	kf52=\E[3S,
+	kf53=\E[15;3~,
+	kf54=\E[17;3~,
+	kf55=\E[18;3~,
+	kf56=\E[19;3~,
+	kf57=\E[20;3~,
+	kf58=\E[21;3~,
+	kf59=\E[23;3~,
+	kf6=\E[17~,
+	kf60=\E[24;3~,
+	kf61=\E[4P,
+	kf62=\E[4Q,
+	kf63=\E[4R,
+	kf7=\E[18~,
+	kf8=\E[19~,
+	kf9=\E[20~,
+
+xterm+pcf2|fragment with modifyFunctionKeys:2,
+	kf1=\EOP,
+	kf10=\E[21~,
+	kf11=\E[23~,
+	kf12=\E[24~,
+	kf13=\E[1;2P,
+	kf14=\E[1;2Q,
+	kf15=\E[1;2R,
+	kf16=\E[1;2S,
+	kf17=\E[15;2~,
+	kf18=\E[17;2~,
+	kf19=\E[18;2~,
+	kf2=\EOQ,
+	kf20=\E[19;2~,
+	kf21=\E[20;2~,
+	kf22=\E[21;2~,
+	kf23=\E[23;2~,
+	kf24=\E[24;2~,
+	kf25=\E[1;5P,
+	kf26=\E[1;5Q,
+	kf27=\E[1;5R,
+	kf28=\E[1;5S,
+	kf29=\E[15;5~,
+	kf3=\EOR,
+	kf30=\E[17;5~,
+	kf31=\E[18;5~,
+	kf32=\E[19;5~,
+	kf33=\E[20;5~,
+	kf34=\E[21;5~,
+	kf35=\E[23;5~,
+	kf36=\E[24;5~,
+	kf37=\E[1;6P,
+	kf38=\E[1;6Q,
+	kf39=\E[1;6R,
+	kf4=\EOS,
+	kf40=\E[1;6S,
+	kf41=\E[15;6~,
+	kf42=\E[17;6~,
+	kf43=\E[18;6~,
+	kf44=\E[19;6~,
+	kf45=\E[20;6~,
+	kf46=\E[21;6~,
+	kf47=\E[23;6~,
+	kf48=\E[24;6~,
+	kf49=\E[1;3P,
+	kf5=\E[15~,
+	kf50=\E[1;3Q,
+	kf51=\E[1;3R,
+	kf52=\E[1;3S,
+	kf53=\E[15;3~,
+	kf54=\E[17;3~,
+	kf55=\E[18;3~,
+	kf56=\E[19;3~,
+	kf57=\E[20;3~,
+	kf58=\E[21;3~,
+	kf59=\E[23;3~,
+	kf6=\E[17~,
+	kf60=\E[24;3~,
+	kf61=\E[1;4P,
+	kf62=\E[1;4Q,
+	kf63=\E[1;4R,
+	kf7=\E[18~,
+	kf8=\E[19~,
+	kf9=\E[20~,
+
+xterm+pcf3|fragment with modifyFunctionKeys:3,
+	kf1=\EOP,
+	kf10=\E[21~,
+	kf11=\E[23~,
+	kf12=\E[24~,
+	kf13=\E[>1;2P,
+	kf14=\E[>1;2Q,
+	kf15=\E[>1;2R,
+	kf16=\E[>1;2S,
+	kf17=\E[>15;2~,
+	kf18=\E[>17;2~,
+	kf19=\E[>18;2~,
+	kf2=\EOQ,
+	kf20=\E[>19;2~,
+	kf21=\E[>20;2~,
+	kf22=\E[>21;2~,
+	kf23=\E[>23;2~,
+	kf24=\E[>24;2~,
+	kf25=\E[>1;5P,
+	kf26=\E[>1;5Q,
+	kf27=\E[>1;5R,
+	kf28=\E[>1;5S,
+	kf29=\E[>15;5~,
+	kf3=\EOR,
+	kf30=\E[>17;5~,
+	kf31=\E[>18;5~,
+	kf32=\E[>19;5~,
+	kf33=\E[>20;5~,
+	kf34=\E[>21;5~,
+	kf35=\E[>23;5~,
+	kf36=\E[>24;5~,
+	kf37=\E[>1;6P,
+	kf38=\E[>1;6Q,
+	kf39=\E[>1;6R,
+	kf4=\EOS,
+	kf40=\E[>1;6S,
+	kf41=\E[>15;6~,
+	kf42=\E[>17;6~,
+	kf43=\E[>18;6~,
+	kf44=\E[>19;6~,
+	kf45=\E[>20;6~,
+	kf46=\E[>21;6~,
+	kf47=\E[>23;6~,
+	kf48=\E[>24;6~,
+	kf49=\E[>1;3P,
+	kf5=\E[15~,
+	kf50=\E[>1;3Q,
+	kf51=\E[>1;3R,
+	kf52=\E[>1;3S,
+	kf53=\E[>15;3~,
+	kf54=\E[>17;3~,
+	kf55=\E[>18;3~,
+	kf56=\E[>19;3~,
+	kf57=\E[>20;3~,
+	kf58=\E[>21;3~,
+	kf59=\E[>23;3~,
+	kf6=\E[17~,
+	kf60=\E[>24;3~,
+	kf61=\E[>1;4P,
+	kf62=\E[>1;4Q,
+	kf63=\E[>1;4R,
+	kf7=\E[18~,
+	kf8=\E[19~,
+	kf9=\E[20~,
+#
+# The "PC-style" modifier scheme was introduced in xterm patch #94 (1999/3/27)
+# and revised in patch #167 (2002/8/24).
+#
+# The original assignments from patch #94 for cursor-keys had some technical
+# issues:
+#
+#	A parameter for a function-key to represent a modifier is just more
+#	bits.  But for a cursor-key it may change the behavior of the
+#	application.  For instance, emacs decodes the first parameter of a
+#	cursor-key as a repeat count.
+#
+#	A parameterized string should (really) not begin with SS3 (\EO).
+#	Rather, CSI (\E[) should be used.
+#
+# For these reasons, the original assignments were deprecated.  For
+# compatibility reasons, they are still available as a setting of xterm's
+# modifyCursorKeys resource.  These fragments list the modified cursor-keys
+# that might apply to xterm+pcfkeys with different values of that resource.
+xterm+pcc3|fragment with modifyCursorKeys:3,
+	kLFT=\E[>1;2D,
+	kRIT=\E[>1;2C,
+	kind=\E[>1;2B,
+	kri=\E[>1;2A,
+	kDN=\E[>1;2B,
+	kDN3=\E[>1;3B,
+	kDN4=\E[>1;4B,
+	kDN5=\E[>1;5B,
+	kDN6=\E[>1;6B,
+	kDN7=\E[>1;7B,
+	kLFT3=\E[>1;3D,
+	kLFT4=\E[>1;4D,
+	kLFT5=\E[>1;5D,
+	kLFT6=\E[>1;6D,
+	kLFT7=\E[>1;7D,
+	kRIT3=\E[>1;3C,
+	kRIT4=\E[>1;4C,
+	kRIT5=\E[>1;5C,
+	kRIT6=\E[>1;6C,
+	kRIT7=\E[>1;7C,
+	kUP=\E[>1;2A,
+	kUP3=\E[>1;3A,
+	kUP4=\E[>1;4A,
+	kUP5=\E[>1;5A,
+	kUP6=\E[>1;6A,
+	kUP7=\E[>1;7A,
+
+xterm+pcc2|fragment with modifyCursorKeys:2,
+	kLFT=\E[1;2D,
+	kRIT=\E[1;2C,
+	kind=\E[1;2B,
+	kri=\E[1;2A,
+	kDN=\E[1;2B,
+	kDN3=\E[1;3B,
+	kDN4=\E[1;4B,
+	kDN5=\E[1;5B,
+	kDN6=\E[1;6B,
+	kDN7=\E[1;7B,
+	kLFT3=\E[1;3D,
+	kLFT4=\E[1;4D,
+	kLFT5=\E[1;5D,
+	kLFT6=\E[1;6D,
+	kLFT7=\E[1;7D,
+	kRIT3=\E[1;3C,
+	kRIT4=\E[1;4C,
+	kRIT5=\E[1;5C,
+	kRIT6=\E[1;6C,
+	kRIT7=\E[1;7C,
+	kUP=\E[1;2A,
+	kUP3=\E[1;3A,
+	kUP4=\E[1;4A,
+	kUP5=\E[1;5A,
+	kUP6=\E[1;6A,
+	kUP7=\E[1;7A,
+
+xterm+pcc1|fragment with modifyCursorKeys:1,
+	kLFT=\E[2D,
+	kRIT=\E[2C,
+	kind=\E[2B,
+	kri=\E[2A,
+	kDN=\E[2B,
+	kDN3=\E[3B,
+	kDN4=\E[4B,
+	kDN5=\E[5B,
+	kDN6=\E[6B,
+	kDN7=\E[7B,
+	kLFT3=\E[3D,
+	kLFT4=\E[4D,
+	kLFT5=\E[5D,
+	kLFT6=\E[6D,
+	kLFT7=\E[7D,
+	kRIT3=\E[3C,
+	kRIT4=\E[4C,
+	kRIT5=\E[5C,
+	kRIT6=\E[6C,
+	kRIT7=\E[7C,
+	kUP=\E[2A,
+	kUP3=\E[3A,
+	kUP4=\E[4A,
+	kUP5=\E[5A,
+	kUP6=\E[6A,
+	kUP7=\E[7A,
+
+xterm+pcc0|fragment with modifyCursorKeys:0,
+	kLFT=\EO2D,
+	kRIT=\EO2C,
+	kind=\EO2B,
+	kri=\EO2A,
+	kDN=\EO2B,
+	kDN3=\EO3B,
+	kDN4=\EO4B,
+	kDN5=\EO5B,
+	kDN6=\EO6B,
+	kDN7=\EO7B,
+	kLFT3=\EO3D,
+	kLFT4=\EO4D,
+	kLFT5=\EO5D,
+	kLFT6=\EO6D,
+	kLFT7=\EO7D,
+	kRIT3=\EO3C,
+	kRIT4=\EO4C,
+	kRIT5=\EO5C,
+	kRIT6=\EO6C,
+	kRIT7=\EO7C,
+	kUP=\EO2A,
+	kUP3=\EO3A,
+	kUP4=\EO4A,
+	kUP5=\EO5A,
+	kUP6=\EO6A,
+	kUP7=\EO7A,
+
+# The home/end keys on the editing keypad are also treated as cursor keys.
+xterm+pce3|fragment with modifyCursorKeys:3,
+	kDC=\E[>3;2~,
+	kEND=\E[>1;2F,
+	kHOM=\E[>1;2H,
+	kIC=\E[>2;2~,
+	kNXT=\E[>6;2~,
+	kPRV=\E[>5;2~,
+	kDC3=\E[>3;3~,
+	kDC4=\E[>3;4~,
+	kDC5=\E[>3;5~,
+	kDC6=\E[>3;6~,
+	kDC7=\E[>3;7~,
+	kEND3=\E[>1;3F,
+	kEND4=\E[>1;4F,
+	kEND5=\E[>1;5F,
+	kEND6=\E[>1;6F,
+	kEND7=\E[>1;7F,
+	kHOM3=\E[>1;3H,
+	kHOM4=\E[>1;4H,
+	kHOM5=\E[>1;5H,
+	kHOM6=\E[>1;6H,
+	kHOM7=\E[>1;7H,
+	kIC3=\E[>2;3~,
+	kIC4=\E[>2;4~,
+	kIC5=\E[>2;5~,
+	kIC6=\E[>2;6~,
+	kIC7=\E[>2;7~,
+	kNXT3=\E[>6;3~,
+	kNXT4=\E[>6;4~,
+	kNXT5=\E[>6;5~,
+	kNXT6=\E[>6;6~,
+	kNXT7=\E[>6;7~,
+	kPRV3=\E[>5;3~,
+	kPRV4=\E[>5;4~,
+	kPRV5=\E[>5;5~,
+	kPRV6=\E[>5;6~,
+	kPRV7=\E[>5;7~,
+	use=xterm+pce0,
+
+xterm+pce2|fragment with modifyCursorKeys:2,
+	kDC=\E[3;2~,
+	kEND=\E[1;2F,
+	kHOM=\E[1;2H,
+	kIC=\E[2;2~,
+	kNXT=\E[6;2~,
+	kPRV=\E[5;2~,
+	kDC3=\E[3;3~,
+	kDC4=\E[3;4~,
+	kDC5=\E[3;5~,
+	kDC6=\E[3;6~,
+	kDC7=\E[3;7~,
+	kEND3=\E[1;3F,
+	kEND4=\E[1;4F,
+	kEND5=\E[1;5F,
+	kEND6=\E[1;6F,
+	kEND7=\E[1;7F,
+	kHOM3=\E[1;3H,
+	kHOM4=\E[1;4H,
+	kHOM5=\E[1;5H,
+	kHOM6=\E[1;6H,
+	kHOM7=\E[1;7H,
+	kIC3=\E[2;3~,
+	kIC4=\E[2;4~,
+	kIC5=\E[2;5~,
+	kIC6=\E[2;6~,
+	kIC7=\E[2;7~,
+	kNXT3=\E[6;3~,
+	kNXT4=\E[6;4~,
+	kNXT5=\E[6;5~,
+	kNXT6=\E[6;6~,
+	kNXT7=\E[6;7~,
+	kPRV3=\E[5;3~,
+	kPRV4=\E[5;4~,
+	kPRV5=\E[5;5~,
+	kPRV6=\E[5;6~,
+	kPRV7=\E[5;7~,
+	use=xterm+pce0,
+
+xterm+pce1|fragment with modifyCursorKeys:1,
+	kDC=\E[3;2~,
+	kEND=\E[2F,
+	kHOM=\E[2H,
+	kIC=\E[2;2~,
+	kNXT=\E[6;2~,
+	kPRV=\E[5;2~,
+	kDC3=\E[3;3~,
+	kDC4=\E[3;4~,
+	kDC5=\E[3;5~,
+	kDC6=\E[3;6~,
+	kDC7=\E[3;7~,
+	kEND3=\E[3F,
+	kEND4=\E[4F,
+	kEND5=\E[5F,
+	kEND6=\E[6F,
+	kEND7=\E[7F,
+	kHOM3=\E[3H,
+	kHOM4=\E[4H,
+	kHOM5=\E[5H,
+	kHOM6=\E[6H,
+	kHOM7=\E[7H,
+	kIC3=\E[2;3~,
+	kIC4=\E[2;4~,
+	kIC5=\E[2;5~,
+	kIC6=\E[2;6~,
+	kIC7=\E[2;7~,
+	kNXT3=\E[6;3~,
+	kNXT4=\E[6;4~,
+	kNXT5=\E[6;5~,
+	kNXT6=\E[6;6~,
+	kNXT7=\E[6;7~,
+	kPRV3=\E[5;3~,
+	kPRV4=\E[5;4~,
+	kPRV5=\E[5;5~,
+	kPRV6=\E[5;6~,
+	kPRV7=\E[5;7~,
+	use=xterm+pce0,
+
+xterm+pce0|fragment with modifyCursorKeys:0,
+	kDC=\E[3;2~,
+	kEND=\EO2F,
+	kHOM=\EO2H,
+	kIC=\E[2;2~,
+	kNXT=\E[6;2~,
+	kPRV=\E[5;2~,
+	kDC3=\E[3;3~,
+	kDC4=\E[3;4~,
+	kDC5=\E[3;5~,
+	kDC6=\E[3;6~,
+	kDC7=\E[3;7~,
+	kEND3=\EO3F,
+	kEND4=\EO4F,
+	kEND5=\EO5F,
+	kEND6=\EO6F,
+	kEND7=\EO7F,
+	kHOM3=\EO3H,
+	kHOM4=\EO4H,
+	kHOM5=\EO5H,
+	kHOM6=\EO6H,
+	kHOM7=\EO7H,
+	kIC3=\E[2;3~,
+	kIC4=\E[2;4~,
+	kIC5=\E[2;5~,
+	kIC6=\E[2;6~,
+	kIC7=\E[2;7~,
+	kNXT3=\E[6;3~,
+	kNXT4=\E[6;4~,
+	kNXT5=\E[6;5~,
+	kNXT6=\E[6;6~,
+	kNXT7=\E[6;7~,
+	kPRV3=\E[5;3~,
+	kPRV4=\E[5;4~,
+	kPRV5=\E[5;5~,
+	kPRV6=\E[5;6~,
+	kPRV7=\E[5;7~,
+	use=xterm+edit,
+#
+# This chunk is used for building the VT220/Sun/PC keyboard variants.
+xterm-basic|modern xterm terminal emulator - common,
+	OTbs,
+	am,
+	bce,
+	km,
+	mc5i,
+	mir,
+	msgr,
+	xenl,
+	AX,
+	colors#8,
+	cols#80,
+	it#8,
+	lines#24,
+	pairs#64,
+	acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+	bel=^G,
+	blink=\E[5m,
+	bold=\E[1m,
+	cbt=\E[Z,
+	civis=\E[?25l,
+	clear=\E[H\E[2J,
+	cnorm=\E[?12l\E[?25h,
+	cr=^M,
+	csr=\E[%i%p1%d;%p2%dr,
+	cub=\E[%p1%dD,
+	cub1=^H,
+	cud=\E[%p1%dB,
+	cud1=^J,
+	cuf=\E[%p1%dC,
+	cuf1=\E[C,
+	cup=\E[%i%p1%d;%p2%dH,
+	cuu=\E[%p1%dA,
+	cuu1=\E[A,
+	cvvis=\E[?12;25h,
+	dch=\E[%p1%dP,
+	dch1=\E[P,
+	dl=\E[%p1%dM,
+	dl1=\E[M,
+	ech=\E[%p1%dX,
+	ed=\E[J,
+	el=\E[K,
+	el1=\E[1K,
+	flash=\E[?5h$<100/>\E[?5l,
+	home=\E[H,
+	hpa=\E[%i%p1%dG,
+	ht=^I,
+	hts=\EH,
+	ich=\E[%p1%d@,
+	il=\E[%p1%dL,
+	il1=\E[L,
+	ind=^J,
+	invis=\E[8m,
+	is2=\E[!p\E[?3;4l\E[4l\E>,
+	kbs=^H,
+	kmous=\E[M,
+	mc0=\E[i,
+	mc4=\E[4i,
+	mc5=\E[5i,
+	meml=\El,
+	memu=\Em,
+	op=\E[39;49m,
+	rc=\E8,
+	rev=\E[7m,
+	ri=\EM,
+	rmacs=\E(B,
+	rmam=\E[?7l,
+	rmcup=\E[?1049l,
+	rmir=\E[4l,
+	rmkx=\E[?1l\E>,
+	rmm=\E[?1034l,
+	rmso=\E[27m,
+	rmul=\E[24m,
+	rs1=\Ec,
+	rs2=\E[!p\E[?3;4l\E[4l\E>,
+	sc=\E7,
+	setab=\E[4%p1%dm,
+	setaf=\E[3%p1%dm,
+	setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
+	setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
+	sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
+	sgr0=\E(B\E[m,
+	smacs=\E(0,
+	smam=\E[?7h,
+	smcup=\E[?1049h,
+	smir=\E[4h,
+	smkx=\E[?1h\E=,
+	smm=\E[?1034h,
+	smso=\E[7m,
+	smul=\E[4m,
+	tbc=\E[3g,
+	u6=\E[%i%d;%dR,
+	u7=\E[6n,
+	u8=\E[?1;2c,
+	u9=\E[c,
+	vpa=\E[%i%p1%dd,
+#
+# The xterm-new description has all of the features, but is not completely
+# compatible with vt220.  If you are using a Sun or PC keyboard, set the
+# sunKeyboard resource to true:
+#	+ maps the editing keypad
+#	+ interprets control-function-key as a second array of keys, so a
+#	  12-fkey keyboard can support vt220's 20-fkeys.
+#	+ maps numeric keypad "+" to ",".
+#	+ uses DEC-style control sequences for the application keypad.
+#
+# Some packagers modify xterm's resource definitions to provide extra function
+# keys by using the shift-modifier in the translations resource.  However, that
+# interferes with the DECUDK functionality.
+#
+xterm-vt220|xterm emulating vt220,
+	ka1=\EOw,
+	ka3=\EOy,
+	kb2=\EOu,
+	kc1=\EOq,
+	kc3=\EOs,
+	kcbt=\E[Z,
+	kend=\E[4~,
+	kent=\EOM,
+	kf1=\EOP,
+	kf10=\E[21~,
+	kf11=\E[23~,
+	kf12=\E[24~,
+	kf13=\E[25~,
+	kf14=\E[26~,
+	kf15=\E[28~,
+	kf16=\E[29~,
+	kf17=\E[31~,
+	kf18=\E[32~,
+	kf19=\E[33~,
+	kf2=\EOQ,
+	kf20=\E[34~,
+	kf3=\EOR,
+	kf4=\EOS,
+	kf5=\E[15~,
+	kf6=\E[17~,
+	kf7=\E[18~,
+	kf8=\E[19~,
+	kf9=\E[20~,
+	khome=\E[1~,
+	kich1=\E[2~,
+	knp=\E[6~,
+	kpp=\E[5~,
+	ka2=\EOx,
+	kb1=\EOt,
+	kb3=\EOv,
+	kc2=\EOr,
+	use=xterm+app,
+	use=xterm+edit,
+	use=xterm-basic,
+#
+xterm-vt52|xterm emulating dec vt52,
+	cols#80,
+	it#8,
+	lines#24,
+	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+	bel=^G,
+	clear=\EH\EJ,
+	cr=^M,
+	cub1=\ED,
+	cud1=\EB,
+	cuf1=\EC,
+	cup=\EY%p1%' '%+%c%p2%' '%+%c,
+	cuu1=\EA,
+	ed=\EJ,
+	el=\EK,
+	home=\EH,
+	ht=^I,
+	ind=^J,
+	kbs=^H,
+	kcub1=\ED,
+	kcud1=\EB,
+	kcuf1=\EC,
+	kcuu1=\EA,
+	nel=^M^J,
+	ri=\EI,
+	rmacs=\EG,
+	smacs=\EF,
+#
+# Sun does not number the function keys this way in their sparse termcap; their
+# terminal descriptions ignore the keypads.  kb(7M) states that there are codes
+# reserved for 64 function keys, 16 each in left, right, top and bottom.  Each
+# keyboard type has a different number of function keys in different
+# arrangements.  Using xkeycaps for reference:
+#
+# Type 3:  left 10, top 9, right 15
+# ------
+# kf1-kf9 are XK_F1-XK_F9
+# There is no kf10 on this keyboard type.
+# kf11-kf20 are keysyms XK_L1 through XK_L10.
+# kf31-kf45 are keysyms XK_R1 through XK_R15.
+#
+# However, X's keysymdef.h is hard-coded to make
+#	XK_L1==XK_F11 and
+#	XK_R1==XK_F21,
+# by someone who was unfamiliar with terminal types other than Sun's.  So
+# xterm uses the internal X keysymbols, but the terminfo entry uses the Sun
+# numbering scheme.
+#
+# Type 4:  left 11, top 12, right 15
+# ------
+# The left-keypad contains an unnumbered Help-key.
+# The right-keypad also contains NumLock, Ins, Del, Enter, + and - keys which
+# do not appear to be part of the R-sequence.
+#
+# Type 5:  left 9, top 12, right (more than one keypad)
+# ------
+# These keyboards do not use the same naming convention, look like a hybrid of
+# the type 4 and IBM keyboards.
+#
+# XTerm resources:
+# ---------------
+# Set the modifyFunctionKeys resource to negative (-1) to make it simple to
+# enter the higher function-key values using shift- and control-modifiers.
+#
+xterm-sun|xterm with sun function keys,
+	kb2=\E[218z,
+	kcpy=\E[197z,
+	kcub1=\EOD,
+	kcud1=\EOB,
+	kcuf1=\EOC,
+	kcuu1=\EOA,
+	kdch1=\E[3z,
+	kend=\E[220z,
+	kent=\EOM,
+	kf1=\E[224z,
+	kf10=\E[233z,
+	kf11=\E[192z,
+	kf12=\E[193z,
+	kf13=\E[194z,
+	kf14=\E[195z,
+	kf15=\E[196z,
+	kf17=\E[198z,
+	kf18=\E[199z,
+	kf19=\E[200z,
+	kf2=\E[225z,
+	kf20=\E[201z,
+	kf3=\E[226z,
+	kf31=\E[208z,
+	kf32=\E[209z,
+	kf33=\E[210z,
+	kf34=\E[211z,
+	kf35=\E[212z,
+	kf36=\E[213z,
+	kf38=\E[215z,
+	kf4=\E[227z,
+	kf40=\E[217z,
+	kf42=\E[219z,
+	kf44=\E[221z,
+	kf45=\E[222z,
+	kf46=\E[234z,
+	kf47=\E[235z,
+	kf5=\E[228z,
+	kf6=\E[229z,
+	kf7=\E[230z,
+	kf8=\E[231z,
+	kf9=\E[232z,
+	kfnd=\E[200z,
+	khlp=\E[196z,
+	khome=\E[214z,
+	kich1=\E[2z,
+	knp=\E[222z,
+	kpp=\E[216z,
+	kund=\E[195z,
+	use=xterm-basic,
+#
+xterm-hp|xterm with hpterm function keys,
+	kclr=\EJ,
+	kcub1=\ED,
+	kcud1=\EB,
+	kcuf1=\EC,
+	kcuu1=\EA,
+	kdch1=\EP,
+	kend=\EF,
+	kf1=\Ep,
+	kf2=\Eq,
+	kf3=\Er,
+	kf4=\Es,
+	kf5=\Et,
+	kf6=\Eu,
+	kf7=\Ev,
+	kf8=\Ew,
+	khome=\Eh,
+	kich1=\EQ,
+	knp=\ES,
+	kpp=\ET,
+	use=xterm-basic,
+#
+# scoterm implements 48 function-keys using shift- and control-modifiers to
+# multiple 12 function-keys.  X has a hard-coded limit of 35 function-keys,
+# but xterm can represent larger values.
+#
+# XTerm resources:
+# ---------------
+# Set the modifyFunctionKeys resource to negative (-1) to make it simple to
+# enter the higher function-key values using shift- and control-modifiers.
+#
+# Also, set ctrlFKeys resource to 12 (the default is 10) to make xterm see 48
+# function-keys on a keyboard with 12 function-keys and 4 control/shift
+# modifier combinations.
+#
+xterm-sco|xterm with SCO function keys,
+	kbeg=\E[E,
+	kdch1=\177,
+	kf1=\E[M,
+	kf10=\E[V,
+	kf11=\E[W,
+	kf12=\E[X,
+	kf13=\E[Y,
+	kf14=\E[Z,
+	kf15=\E[a,
+	kf16=\E[b,
+	kf17=\E[c,
+	kf18=\E[d,
+	kf19=\E[e,
+	kf2=\E[N,
+	kf20=\E[f,
+	kf21=\E[g,
+	kf22=\E[h,
+	kf23=\E[i,
+	kf24=\E[j,
+	kf25=\E[k,
+	kf26=\E[l,
+	kf27=\E[m,
+	kf28=\E[n,
+	kf29=\E[o,
+	kf3=\E[O,
+	kf30=\E[p,
+	kf31=\E[q,
+	kf32=\E[r,
+	kf33=\E[s,
+	kf34=\E[t,
+	kf35=\E[u,
+	kf36=\E[v,
+	kf37=\E[w,
+	kf38=\E[x,
+	kf39=\E[y,
+	kf4=\E[P,
+	kf40=\E[z,
+	kf41=\E[@,
+	kf42=\E[[,
+	kf43=\E[\\,
+	kf44=\E[],
+	kf45=\E[\^,
+	kf46=\E[_,
+	kf47=\E[`,
+	kf48=\E[{,
+	kf5=\E[Q,
+	kf6=\E[R,
+	kf7=\E[S,
+	kf8=\E[T,
+	kf9=\E[U,
+	kich1=\E[L,
+	kmous=\E[>M,
+	knp=\E[G,
+	kpp=\E[I,
+	use=xterm+noapp,
+	use=xterm-basic,
+#
+# Other variants (these are all very old entries, from X11R5):
+xterm-24|xterms|vs100|xterm terminal emulator (X Window System),
+	lines#24,
+	use=xterm-old,
+xterm-65|xterm with tall window 65x80 (X Window System),
+	lines#65,
+	use=xterm-old,
+xterm-bold|xterm with bold instead of underline (X Window System),
+	smso=\E[7m,
+	smul=\E[1m,
+	use=xterm-old,
+xterm-boldso|xterm with bold for standout (X Window System),
+	rmso=\E[m,
+	smso=\E[1m,
+	use=xterm-old,
+xterm-mono|monochrome xterm,
+	bce@,
+	colors@,
+	ncv@,
+	pairs@,
+	op@,
+	setab@,
+	setaf@,
+	setb@,
+	setf@,
+	sgr@,
+	use=xterm-old,
+#
+# VTxxx terminals are usually set up so that full-screen applications will use
+# the cursor application mode strings.  This is good for full-screen
+# applications, including legacy applications which may have hard-coded
+# behavior, but bad for interactive shells (e.g., tcsh, bash) which use arrow
+# keys to scroll through a history of command strings.
+#
+# To see the difference between normal/application modes, consider this example:
+#	+ In normal (non-application) mode, the terminal transmits a down-arrow
+#	  as \E[C, which happens to echo as a down-arrow.
+#	+ In application mode the terminal transmits \EOC, which echoes as C.
+#	  That is because the \EO is the SS3 control, which says to use the
+#	  character from the G3 character set for the next cell.
+#
+# One example of hard-coded behavior would be for applications written to work
+# with VT52 and VT100 terminals.  If the application's parser ignores 'O' and
+# '?' characters after the escape, then the cursor and keypad strings for the
+# two terminals are the same.  (Indeed, one of the first curses applications
+# which I used did something like this to cover "ANSI" terminals -TD).
+#
+# To make this work (leaving the cursor keys in normal mode), we have to adjust
+# the terminal initialization sequences:
+#
+#	smkx/rmkx set/reset the cursor and keypad application modes.  We retain
+#		the latter (otherwise many applications fail).
+#
+#	smcup/rmcup set/restore cursor-addressing mode for full-screen
+#		applications.  For xterm, this normally means the alternate
+#		screen, which is not compatible with interactive shells.  Some
+#		programs are "smart" and disable these.
+#
+xterm-noapp|xterm with cursor keys in normal mode,
+	rmcup@,
+	rmkx=\E>,
+	smcup@,
+	smkx=\E=,
+	use=xterm+noapp,
+	use=xterm,
+
+xterm+noapp|fragment with cursor keys in normal mode,
+	kcub1=\E[D,
+	kcud1=\E[B,
+	kcuf1=\E[C,
+	kcuu1=\E[A,
+	use=xterm+noapp+pc,
+
+xterm+app|fragment with cursor keys in application mode,
+	kcub1=\EOD,
+	kcud1=\EOB,
+	kcuf1=\EOC,
+	kcuu1=\EOA,
+	use=xterm+app+pc,
+
+xterm+noapp+pc|fragment for noapp pc-style home/end,
+	kend=\E[F,
+	khome=\E[H,
+
+xterm+app+pc|fragment for app pc-style home/end,
+	kend=\EOF,
+	khome=\EOH,
+
+xterm+edit|fragment for 6-key editing-keypad,
+	kdch1=\E[3~,
+	kich1=\E[2~,
+	knp=\E[6~,
+	kpp=\E[5~,
+	use=xterm+pc+edit,
+
+xterm+decedit|fragment for vt220 6-key editing-keypad,
+	kdch1=\E[3~,
+	kich1=\E[2~,
+	knp=\E[6~,
+	kpp=\E[5~,
+	use=xterm+vt+edit,
+
+xterm+pc+edit|fragment for pc-style editing keypad,
+	kend=\E[4~,
+	khome=\E[1~,
+
+xterm+vt+edit|fragment for vt220-style editing keypad,
+	kfnd=\E[1~,
+	kslt=\E[4~,
+
+#
+# This should work for the commonly used "color xterm" variations (XFree86
+# xterm, color_xterm, nxterm, rxvt).  Note that it does not set 'bce', so for
+# XFree86 and and rxvt, some applications that use colors will be less
+# efficient, and in a few special cases (with "smart" optimization) the wrong
+# color will be painted in spots.
+xterm-color|generic "ANSI" color xterm (X Window System),
+	colors#8,
+	ncv@,
+	pairs#64,
+	op=\E[m,
+	setab=\E[4%p1%dm,
+	setaf=\E[3%p1%dm,
+	use=xterm-r6,
+#
+# vi may work better with this entry, because vi
+# doesn't use insert mode much
+xterm-ic|xterm-vi|xterm with insert character instead of insert mode,
+	mir@,
+	ich=\E[%p1%d@,
+	ich1=\E[@,
+	rmir@,
+	smir@,
+	use=xterm,
+#
+# This is used only for testing (it's not relevant to DEC VTxxx terminals, but
+# to ncurses).
+xterm-xmc|xterm with magic-cookie glitch,
+	xmc#1,
+	use=xterm-new,
+#
+# This one also is primarily for testing ncurses; while the ISO 6429 defines
+# the REP control, none of the DEC VTxxx terminals (VT52 through VT420) support
+# it.
+xterm-rep|xterm with repeat-character control,
+	rep=%p1%c\E[%p2%{1}%-%db,
+	use=xterm-new,
+#
+# This is mainly for testing xterm; the real VT220 will not let you switch
+# character sets without first altering the keyboard language in the setup
+# screen.  Some emulators allow this anyway.  (Note that these strings are
+# normally used only for printers).  The parameter to csnm and scs is the same
+# in both cases:  the keyboard language parameter returned by CSI ? 2 6 n.
+xterm-nrc|xterm with VT220 national replacement character sets,
+	csnm=%?%p1%{1}%=%tNorth American%e%p1%{2}%=%tBritish%e%p1%{3}%=%tFlemish%e%p1%{4}%=%tFrench Canadian%e%p1%{5}%=%tDanish%e%p1%{6}%=%tFinnish%e%p1%{7}%=%tGerman%e%p1%{8}%=%tDutch%e%p1%{9}%=%tItalian%e%p1%{10}%=%tSwiss (French)%e%p1%{11}%=%tSwiss (German)%e%p1%{12}%=%tSwedish%e%p1%{13}%=%tNorwegian%e%p1%{14}%=%tFrench/Belgian%e%p1%{15}%=%tSpanish%;,
+	scs=%?%p1%{1}%=%t\E(B%e%p1%{2}%=%t\E(A%e%p1%{3}%=%t\E(R%e%p1%{4}%=%t\E(9%e%p1%{5}%=%t\E(E%e%p1%{6}%=%t\E(5%e%p1%{7}%=%t\E(K%e%p1%{8}%=%t\E(4%e%p1%{9}%=%t\E(Y%e%p1%{10}%=%t\E(=%e%p1%{11}%=%t\E(=%e%p1%{12}%=%t\E(7%e%p1%{13}%=%t\E(E%e%p1%{14}%=%t\E(R%e%p1%{15}%=%t\E(Z%;,
+	use=xterm-new,
+#
+# Foreground 0-15 maps (with toggles) into 30-37 & 90-97
+# Background 0-15 maps (with toggles) into 40-47 & 100-107
+#
+# Originally I suppressed setaf/setab, since ANSI specifies only 8 colors, but
+# Stephen Marley persuaded me to allow the "ANSI" color controls to extend to
+# 16 colors.  (Note that ncurses 4.2 uses setf/setb from this description;
+# however 5.0 selects either according to their availability).  - T.Dickey
+#
+# SVr4 curses does not use more than 8 colors anyway, so using 16 colors is
+# either for terminfo-level applications or via ncurses.
+xterm-16color|xterm with 16 colors,
+	colors#16,
+	pairs#256,
+	setab=\E[%?%p1%{8}%<%t%p1%{40}%+%e%p1%{92}%+%;%dm,
+	setaf=\E[%?%p1%{8}%<%t%p1%{30}%+%e%p1%{82}%+%;%dm,
+	setb=%p1%{8}%/%{6}%*%{4}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e%ga%{3}%=%t6%e%ga%{4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m,
+	setf=%p1%{8}%/%{6}%*%{3}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e%ga%{3}%=%t6%e%ga%{4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m,
+	use=xterm-new,
+#
+# This uses RGB values 0..1000
+#
+# 256 colors should give 65536 pairs, but terminfo stores numbers in a signed
+# short.  Most people will not notice problems with only 32767 pairs.
+xterm-256color|xterm with 256 colors,
+	ccc,
+	colors#256,
+	pairs#32767,
+	initc=\E]4;%p1%d;rgb\:%p2%{255}%*%{1000}%/%2.2X/%p3%{255}%*%{1000}%/%2.2X/%p4%{255}%*%{1000}%/%2.2X\E\\,
+	setab=\E[%?%p1%{8}%<%t4%p1%d%e%p1%{16}%<%t10%p1%{8}%-%d%e48;5;%p1%d%;m,
+	setaf=\E[%?%p1%{8}%<%t3%p1%d%e%p1%{16}%<%t9%p1%{8}%-%d%e38;5;%p1%d%;m,
+	setb@,
+	setf@,
+	use=xterm-new,
+xterm-88color|xterm with 88 colors,
+	colors#88,
+	pairs#7744,
+	use=xterm-256color,
+#
+# This is an 8-bit version of xterm, which emulates DEC vt220 with ANSI color.
+# To use it, your decTerminalID resource must be set to 200 or above, and the
+# sunKeyboard resource set to true.
+#
+#	HTS	\E H	\210
+#	RI	\E M	\215
+#	SS3	\E O	\217
+#	CSI	\E [	\233
+#
+xterm-8bit|xterm terminal emulator with 8-bit controls (X Window System),
+	OTbs,
+	am,
+	bce,
+	km,
+	mc5i,
+	mir,
+	msgr,
+	npc,
+	xenl,
+	AX,
+	colors#8,
+	cols#80,
+	it#8,
+	lines#24,
+	pairs#64,
+	acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+	bel=^G,
+	blink=\2335m,
+	bold=\2331m,
+	cbt=\233Z,
+	civis=\233?25l,
+	clear=\233H\2332J,
+	cnorm=\233?25l\233?25h,
+	cr=^M,
+	csr=\233%i%p1%d;%p2%dr,
+	cub=\233%p1%dD,
+	cub1=^H,
+	cud=\233%p1%dB,
+	cud1=^J,
+	cuf=\233%p1%dC,
+	cuf1=\233C,
+	cup=\233%i%p1%d;%p2%dH,
+	cuu=\233%p1%dA,
+	cuu1=\233A,
+	cvvis=\233?12;25h,
+	dch=\233%p1%dP,
+	dch1=\233P,
+	dl=\233%p1%dM,
+	dl1=\233M,
+	ech=\233%p1%dX,
+	ed=\233J,
+	el=\233K,
+	el1=\2331K,
+	flash=\233?5h$<100/>\233?5l,
+	home=\233H,
+	hpa=\233%i%p1%dG,
+	ht=^I,
+	hts=\210,
+	ich=\233%p1%d@,
+	il=\233%p1%dL,
+	il1=\233L,
+	ind=^J,
+	invis=\2338m,
+	is2=\E[62"p\E G\233m\233?7h\E>\E7\233?1;3;4;6l\2334l\233r\E8,
+	ka1=\217w,
+	ka3=\217u,
+	kb2=\217y,
+	kbeg=\217E,
+	kbs=^H,
+	kc1=\217q,
+	kc3=\217s,
+	kcbt=\233Z,
+	kcub1=\217D,
+	kcud1=\217B,
+	kcuf1=\217C,
+	kcuu1=\217A,
+	kdch1=\2333~,
+	kend=\2334~,
+	kent=\217M,
+	kf1=\23311~,
+	kf10=\23321~,
+	kf11=\23323~,
+	kf12=\23324~,
+	kf13=\23325~,
+	kf14=\23326~,
+	kf15=\23328~,
+	kf16=\23329~,
+	kf17=\23331~,
+	kf18=\23332~,
+	kf19=\23333~,
+	kf2=\23312~,
+	kf20=\23334~,
+	kf3=\23313~,
+	kf4=\23314~,
+	kf5=\23315~,
+	kf6=\23317~,
+	kf7=\23318~,
+	kf8=\23319~,
+	kf9=\23320~,
+	khome=\2331~,
+	kich1=\2332~,
+	kmous=\233M,
+	knp=\2336~,
+	kpp=\2335~,
+	mc0=\233i,
+	mc4=\2334i,
+	mc5=\2335i,
+	meml=\El,
+	memu=\Em,
+	op=\23339;49m,
+	rc=\E8,
+	rev=\2337m,
+	ri=\215,
+	rmacs=\E(B,
+	rmam=\233?7l,
+	rmcup=\233?1049l,
+	rmir=\2334l,
+	rmkx=\233?1l\E>,
+	rmso=\23327m,
+	rmul=\23324m,
+	rs1=\Ec,
+	rs2=\E[62"p\E G\233m\233?7h\E>\E7\233?1;3;4;6l\2334l\233r\E8,
+	sc=\E7,
+	setab=\2334%p1%dm,
+	setaf=\2333%p1%dm,
+	setb=\2334%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
+	setf=\2333%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
+	sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;,
+	sgr0=\2330m\E(B,
+	smacs=\E(0,
+	smam=\233?7h,
+	smcup=\233?1049h,
+	smir=\2334h,
+	smkx=\233?1h\E=,
+	smso=\2337m,
+	smul=\2334m,
+	tbc=\2333g,
+	u6=\233[%i%d;%dR,
+	u7=\E[6n,
+	u8=\233[?1;2c,
+	u9=\E[c,
+	vpa=\233%i%p1%dd,
+#
+xterm-xf86-v44|xterm terminal emulator (XFree86 4.4 Window System),
+	OTbs,
+	am,
+	bce,
+	km,
+	mc5i,
+	mir,
+	msgr,
+	npc,
+	xenl,
+	AX,
+	colors#8,
+	cols#80,
+	it#8,
+	lines#24,
+	pairs#64,
+	acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+	bel=^G,
+	blink=\E[5m,
+	bold=\E[1m,
+	cbt=\E[Z,
+	civis=\E[?25l,
+	clear=\E[H\E[2J,
+	cnorm=\E[?12l\E[?25h,
+	cr=^M,
+	csr=\E[%i%p1%d;%p2%dr,
+	cub=\E[%p1%dD,
+	cub1=^H,
+	cud=\E[%p1%dB,
+	cud1=^J,
+	cuf=\E[%p1%dC,
+	cuf1=\E[C,
+	cup=\E[%i%p1%d;%p2%dH,
+	cuu=\E[%p1%dA,
+	cuu1=\E[A,
+	cvvis=\E[?12;25h,
+	dch=\E[%p1%dP,
+	dch1=\E[P,
+	dl=\E[%p1%dM,
+	dl1=\E[M,
+	ech=\E[%p1%dX,
+	ed=\E[J,
+	el=\E[K,
+	el1=\E[1K,
+	enacs=\E(B\E)0,
+	flash=\E[?5h$<100/>\E[?5l,
+	home=\E[H,
+	hpa=\E[%i%p1%dG,
+	ht=^I,
+	hts=\EH,
+	ich=\E[%p1%d@,
+	il=\E[%p1%dL,
+	il1=\E[L,
+	ind=^J,
+	indn=\E[%p1%dS,
+	invis=\E[8m,
+	is2=\E[!p\E[?3;4l\E[4l\E>,
+	kDC=\E[3;2~,
+	kEND=\E[1;2F,
+	kHOM=\E[1;2H,
+	kIC=\E[2;2~,
+	kLFT=\E[1;2D,
+	kNXT=\E[6;2~,
+	kPRV=\E[5;2~,
+	kRIT=\E[1;2C,
+	kb2=\EOE,
+	kbs=^H,
+	kcbt=\E[Z,
+	kcub1=\EOD,
+	kcud1=\EOB,
+	kcuf1=\EOC,
+	kcuu1=\EOA,
+	kdch1=\E[3~,
+	kend=\EOF,
+	kent=\EOM,
+	kf1=\EOP,
+	kf10=\E[21~,
+	kf11=\E[23~,
+	kf12=\E[24~,
+	kf13=\EO2P,
+	kf14=\EO2Q,
+	kf15=\EO2R,
+	kf16=\EO2S,
+	kf17=\E[15;2~,
+	kf18=\E[17;2~,
+	kf19=\E[18;2~,
+	kf2=\EOQ,
+	kf20=\E[19;2~,
+	kf21=\E[20;2~,
+	kf22=\E[21;2~,
+	kf23=\E[23;2~,
+	kf24=\E[24;2~,
+	kf25=\EO5P,
+	kf26=\EO5Q,
+	kf27=\EO5R,
+	kf28=\EO5S,
+	kf29=\E[15;5~,
+	kf3=\EOR,
+	kf30=\E[17;5~,
+	kf31=\E[18;5~,
+	kf32=\E[19;5~,
+	kf33=\E[20;5~,
+	kf34=\E[21;5~,
+	kf35=\E[23;5~,
+	kf36=\E[24;5~,
+	kf37=\EO6P,
+	kf38=\EO6Q,
+	kf39=\EO6R,
+	kf4=\EOS,
+	kf40=\EO6S,
+	kf41=\E[15;6~,
+	kf42=\E[17;6~,
+	kf43=\E[18;6~,
+	kf44=\E[19;6~,
+	kf45=\E[20;6~,
+	kf46=\E[21;6~,
+	kf47=\E[23;6~,
+	kf48=\E[24;6~,
+	kf5=\E[15~,
+	kf6=\E[17~,
+	kf7=\E[18~,
+	kf8=\E[19~,
+	kf9=\E[20~,
+	khome=\EOH,
+	kich1=\E[2~,
+	kmous=\E[M,
+	knp=\E[6~,
+	kpp=\E[5~,
+	mc0=\E[i,
+	mc4=\E[4i,
+	mc5=\E[5i,
+	meml=\El,
+	memu=\Em,
+	op=\E[39;49m,
+	rc=\E8,
+	rev=\E[7m,
+	ri=\EM,
+	rin=\E[%p1%dT,
+	rmacs=^O,
+	rmam=\E[?7l,
+	rmcup=\E[?1049l,
+	rmir=\E[4l,
+	rmkx=\E[?1l\E>,
+	rmso=\E[27m,
+	rmul=\E[24m,
+	rs1=\Ec,
+	rs2=\E[!p\E[?3;4l\E[4l\E>,
+	sc=\E7,
+	setab=\E[4%p1%dm,
+	setaf=\E[3%p1%dm,
+	setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
+	setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
+	sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
+	sgr0=\E[m\017,
+	smacs=^N,
+	smam=\E[?7h,
+	smcup=\E[?1049h,
+	smir=\E[4h,
+	smkx=\E[?1h\E=,
+	smso=\E[7m,
+	smul=\E[4m,
+	tbc=\E[3g,
+	u6=\E[%i%d;%dR,
+	u7=\E[6n,
+	u8=\E[?1;2c,
+	u9=\E[c,
+	vpa=\E[%i%p1%dd,
+	ka2=\EOx,
+	kb1=\EOt,
+	kb3=\EOv,
+	kc2=\EOr,
+xterm-xfree86|xterm terminal emulator (XFree86 4.4 Window System),
+	use=xterm-xf86-v44,
+#
+# Compatible with the R6 xterm, with the following changes:
+#	+ added acsc (perhaps some versions of tic assume the standard vt100
+#	  alternate character set)
+#	+ added u6, u7, u8, u9 strings for Daniel Weaver's tack program.
+#	+ added kmous string for ncurses.
+#	+ added khome/kend strings (which conflict with kfnd/kslt, see note).
+xterm-r6|xterm-old|xterm X11R6 version,
+	OTbs,
+	am,
+	km,
+	mir,
+	msgr,
+	xenl,
+	cols#80,
+	it#8,
+	lines#24,
+	acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+	bel=^G,
+	bold=\E[1m,
+	clear=\E[H\E[2J,
+	cr=^M,
+	csr=\E[%i%p1%d;%p2%dr,
+	cub=\E[%p1%dD,
+	cub1=^H,
+	cud=\E[%p1%dB,
+	cud1=^J,
+	cuf=\E[%p1%dC,
+	cuf1=\E[C,
+	cup=\E[%i%p1%d;%p2%dH,
+	cuu=\E[%p1%dA,
+	cuu1=\E[A,
+	dch=\E[%p1%dP,
+	dch1=\E[P,
+	dl=\E[%p1%dM,
+	dl1=\E[M,
+	ed=\E[J,
+	el=\E[K,
+	enacs=\E)0,
+	home=\E[H,
+	ht=^I,
+	hts=\EH,
+	il=\E[%p1%dL,
+	il1=\E[L,
+	ind=^J,
+	is2=\E[m\E[?7h\E[4l\E>\E7\E[r\E[?1;3;4;6l\E8,
+	kbs=^H,
+	kcub1=\EOD,
+	kcud1=\EOB,
+	kcuf1=\EOC,
+	kcuu1=\EOA,
+	kdch1=\E[3~,
+	kf1=\E[11~,
+	kf10=\E[21~,
+	kf11=\E[23~,
+	kf12=\E[24~,
+	kf13=\E[25~,
+	kf14=\E[26~,
+	kf15=\E[28~,
+	kf16=\E[29~,
+	kf17=\E[31~,
+	kf18=\E[32~,
+	kf19=\E[33~,
+	kf2=\E[12~,
+	kf20=\E[34~,
+	kf3=\E[13~,
+	kf4=\E[14~,
+	kf5=\E[15~,
+	kf6=\E[17~,
+	kf7=\E[18~,
+	kf8=\E[19~,
+	kf9=\E[20~,
+	kmous=\E[M,
+	meml=\El,
+	memu=\Em,
+	rc=\E8,
+	rev=\E[7m,
+	ri=\EM,
+	rmacs=^O,
+	rmcup=\E[2J\E[?47l\E8,
+	rmir=\E[4l,
+	rmkx=\E[?1l\E>,
+	rmso=\E[m,
+	rmul=\E[m,
+	rs2=\E[m\E[?7h\E[4l\E>\E7\E[r\E[?1;3;4;6l\E8,
+	sc=\E7,
+	sgr0=\E[m,
+	smacs=^N,
+	smcup=\E7\E[?47h,
+	smir=\E[4h,
+	smkx=\E[?1h\E=,
+	smso=\E[7m,
+	smul=\E[4m,
+	tbc=\E[3g,
+	u6=\E[%i%d;%dR,
+	u7=\E[6n,
+	u8=\E[?1;2c,
+	u9=\E[c,
+	use=xterm+decedit,
+#
+# Compatible with the R5 xterm, with the following changes:
+#	+ changed 'blink=@', to 'blink@' (the former meant that "@" would start
+#	  a blink, the latter that it is not supported).
+#	+ changed kf1 through kf4 to correspond with actual usage.  Though X
+#	  supports keypad symbols for PF1 to PF4, and xterm interprets these
+#	  correctly, the F1 to F4 codes are commonly (but incorrectly) used.
+#	+ moved reset string from rs1 to rs2, to correlate better with termcap.
+#	+ make khome consistent with other entries.
+#	+ use rmul/smul, rmir/smir from termcap, but not rmcup/smcup because
+#	  not everyone wants the alternate screen.
+#	+ added u6, u7, u8, u9 strings for Daniel Weaver's tack program.
+#	+ added kmous string for ncurses.
+xterm-r5|xterm R5 version,
+	OTbs,
+	am,
+	km,
+	msgr,
+	xenl,
+	cols#80,
+	it#8,
+	lines#24,
+	bel=^G,
+	bold=\E[1m,
+	clear=\E[H\E[2J,
+	cr=^M,
+	csr=\E[%i%p1%d;%p2%dr,
+	cub=\E[%p1%dD,
+	cub1=^H,
+	cud=\E[%p1%dB,
+	cud1=^J,
+	cuf=\E[%p1%dC,
+	cuf1=\E[C,
+	cup=\E[%i%p1%d;%p2%dH,
+	cuu=\E[%p1%dA,
+	cuu1=\E[A,
+	dch=\E[%p1%dP,
+	dch1=\E[P,
+	dl=\E[%p1%dM,
+	dl1=\E[M,
+	ed=\E[J,
+	el=\E[K,
+	home=\E[H,
+	ht=^I,
+	hts=\EH,
+	ich=\E[%p1%d@,
+	ich1=\E[@,
+	il=\E[%p1%dL,
+	il1=\E[L,
+	ind=^J,
+	kbs=^H,
+	kcub1=\EOD,
+	kcud1=\EOB,
+	kcuf1=\EOC,
+	kcuu1=\EOA,
+	kdch1=\E[3~,
+	kdl1=\E[31~,
+	kel=\E[8~,
+	kend=\E[4~,
+	kf0=\EOq,
+	kf1=\E[11~,
+	kf10=\E[21~,
+	kf11=\E[23~,
+	kf12=\E[24~,
+	kf2=\E[12~,
+	kf3=\E[13~,
+	kf4=\E[14~,
+	kf5=\E[15~,
+	kf6=\E[17~,
+	kf7=\E[18~,
+	kf8=\E[19~,
+	kf9=\E[20~,
+	khome=\E[1~,
+	kich1=\E[2~,
+	kil1=\E[30~,
+	kmous=\E[M,
+	knp=\E[6~,
+	kpp=\E[5~,
+	rc=\E8,
+	rev=\E[7m,
+	ri=\EM,
+	rmir=\E[4l,
+	rmkx=\E[?1l\E>,
+	rmso=\E[m,
+	rmul=\E[m,
+	rs2=\E>\E[?1;3;4;5;6l\E[4l\E[?7h\E[m\E[r\E[2J\E[H,
+	sc=\E7,
+	sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m,
+	sgr0=\E[m,
+	smir=\E[4h,
+	smkx=\E[?1h\E=,
+	smso=\E[7m,
+	smul=\E[4m,
+	tbc=\E[3g,
+	u6=\E[%i%d;%dR,
+	u7=\E[6n,
+	u8=\E[?1;2c,
+	u9=\E[c,
+#
+#
+# Customization begins here.
+#
+# This is the only entry which you should have to customize, since "xterm"
+# is widely used for a variety of incompatible terminal emulations including
+# color_xterm and rxvt.
+xterm|X11 terminal emulator,
+	use=xterm-new,
+#	use=xterm-r6,