Slackware 13.0slackware-13.0

Wed Aug 26 10:00:38 CDT 2009
Slackware 13.0 x86_64 is released as stable!  Thanks to everyone who
helped make this release possible -- see the RELEASE_NOTES for the
credits.  The ISOs are off to the replicator.  This time it will be a
6 CD-ROM 32-bit set and a dual-sided 32-bit/64-bit x86/x86_64 DVD.
We're taking pre-orders now at store.slackware.com.  Please consider
picking up a copy to help support the project.  Once again, thanks to
the entire Slackware community for all the help testing and fixing
things and offering suggestions during this development cycle.
As always, have fun and enjoy!  -P.

4 files changed, 276 insertions, 0 deletions

diff --git a/source/l/pango/pango.SlackBuild b/source/l/pango/pango.SlackBuild
new file mode 100755
index 00000000..79234a74
--- /dev/null
+++ b/source/l/pango/pango.SlackBuild
@@ -0,0 +1,139 @@
+#!/bin/sh
+
+# Copyright 2008, 2009  Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+VERSION=1.22.4
+ARCH=${ARCH:-x86_64}
+BUILD=${BUILD:-4}
+
+NUMJOBS=${NUMJOBS:-" -j7 "}
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-pango
+rm -rf $PKG
+mkdir -p $TMP $PKG/usr
+
+cd $TMP
+rm -rf pango-$VERSION
+tar xvf $CWD/pango-$VERSION.tar.bz2 || exit 1
+cd pango-$VERSION
+# Fix for x86_64 (does not hurt the other archs but note that we will start
+# using /etc/pango/$host instead of /etc/pango/ now):
+zcat $CWD/pango.etc.host.location.diff.gz | patch -p1 --verbose || exit 1
+
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \; -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \;
+
+# Autoconf changes linux to linux-gnu.
+# Our host is $ARCH-slackware-linux not $ARCH-slackware-linux-gnu:
+sed -i -e 's#linux|linux-gnu|#linux|linux|#' config.sub
+
+CFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/pango-$VERSION \
+  --build=$ARCH-slackware-linux \
+  --host=$ARCH-slackware-linux \
+  --target=$ARCH-slackware-linux
+
+make $NUMJOBS || make || exit 1
+
+# Check the host value that is passed to the compile to the one in this script:
+host="$ARCH-slackware-linux"
+compile_host=$(grep 'host_triplet =' pango/Makefile | sed "s/.* = //")
+if [ "x$compile_host" != "x$host" ]; then
+  echo "Host mismatch: compile='$compile_host', SlackBuild='$host'" && exit 1
+fi
+
+make install DESTDIR=$PKG || exit 1
+
+# Install wrapper for pango-querymodules:
+cp $CWD/update-pango-querymodules $PKG/usr/bin/update-pango-querymodules
+chmod 0755 $PKG/usr/bin/update-pango-querymodules
+
+# Do not remove pangox.aliases
+rm -f $PKG/etc/pango/pango.modules
+mkdir -p $PKG/etc/pango/$host
+touch $PKG/etc/pango/$host/pango.modules
+
+# We need to have separate 32-bit and 64-bit binaries
+# for places where we have two copies of the GTK+ package installed.
+# (we might have x86_64 and i486 packages on the same system, for example.)
+case "$host" in
+  s390x*|x86_64*)
+   mv $PKG/usr/bin/pango-querymodules $PKG/usr/bin/pango-querymodules-64
+   ( cd $PKG/usr/bin ; ln -sf pango-querymodules-64 pango-querymodules )
+   ;;
+  *)
+   mv $PKG/usr/bin/pango-querymodules $PKG/usr/bin/pango-querymodules-32
+   ( cd $PKG/usr/bin ; ln -sf pango-querymodules-32 pango-querymodules )
+   ;;
+esac
+
+mkdir -p $PKG/install
+cat <<EOF > $PKG/install/doinst.sh
+# Updating the pango.modules file:
+chroot . /sbin/ldconfig 2> /dev/null
+if [ -x /usr/bin/update-pango-querymodules ]; then
+  /usr/bin/update-pango-querymodules
+fi
+EOF
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+
+( cd $PKG/usr/man
+  find . -type f -exec gzip -9 {} \;
+  for i in $(find . -type l) ; do ln -s $(readlink $i).gz $i.gz ; rm $i ; done
+)
+
+mkdir -p $PKG/usr/doc/pango-$VERSION
+cp -a \
+  AUTHORS COPYING* NEWS README TODO \
+  $PKG/usr/doc/pango-$VERSION
+ln -s /usr/share/gtk-doc/html/pango $PKG/usr/doc/pango-$VERSION/html
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n --prepend $TMP/pango-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/source/l/pango/pango.etc.host.location.diff b/source/l/pango/pango.etc.host.location.diff
new file mode 100644
index 00000000..bb5a26db
--- /dev/null
+++ b/source/l/pango/pango.etc.host.location.diff
@@ -0,0 +1,33 @@
+diff -uarN pango-1.22.4.orig/pango/Makefile.am pango-1.22.4/pango/Makefile.am
+--- pango-1.22.4.orig/pango/Makefile.am	2008-12-16 07:14:00.000000000 +0100
++++ pango-1.22.4/pango/Makefile.am	2009-03-04 23:58:26.000000000 +0100
+@@ -19,6 +19,7 @@
+ 	-DPANGO_ENABLE_BACKEND				\
+ 	-DPANGO_ENABLE_ENGINE				\
+ 	-DSYSCONFDIR=\"$(sysconfdir)\"			\
++	-DHOST=\"$(host_triplet)\"                      \
+ 	-DLIBDIR=\"$(libdir)\"				\
+ 	-I$(top_srcdir)					\
+ 	$(PANGO_DEBUG_FLAGS)				\
+diff -uarN pango-1.22.4.orig/pango/Makefile.in pango-1.22.4/pango/Makefile.in
+--- pango-1.22.4.orig/pango/Makefile.in	2008-12-16 07:14:36.000000000 +0100
++++ pango-1.22.4/pango/Makefile.in	2009-03-04 23:58:26.000000000 +0100
+@@ -427,6 +427,7 @@
+ 	-DPANGO_ENABLE_BACKEND				\
+ 	-DPANGO_ENABLE_ENGINE				\
+ 	-DSYSCONFDIR=\"$(sysconfdir)\"			\
++	-DHOST=\"$(host_triplet)\"                      \
+ 	-DLIBDIR=\"$(libdir)\"				\
+ 	-I$(top_srcdir)					\
+ 	$(PANGO_DEBUG_FLAGS)				\
+diff -uarN pango-1.22.4.orig/pango/modules.c pango-1.22.4/pango/modules.c
+--- pango-1.22.4.orig/pango/modules.c	2008-12-16 07:14:00.000000000 +0100
++++ pango-1.22.4/pango/modules.c	2009-03-04 23:58:26.000000000 +0100
+@@ -508,6 +508,7 @@
+ 
+   if (!file_str)
+     file_str = g_build_filename (pango_get_sysconf_subdirectory (),
++				 HOST,
+ 				 "pango.modules",
+ 				 NULL);
+ 
diff --git a/source/l/pango/slack-desc b/source/l/pango/slack-desc
new file mode 100644
index 00000000..31be0ffe
--- /dev/null
+++ b/source/l/pango/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+     |-----handy-ruler------------------------------------------------------|
+pango: pango (library for layout and rendering of text)
+pango:
+pango: Pango is a library for layout and rendering of text, with an emphasis
+pango: on internationalization. Pango can be used anywhere that text layout
+pango: is needed; however, most of the work on Pango was done using the GTK+
+pango: widget toolkit as a test platform. Pango forms the core of text and
+pango: font handling for GTK+-2.
+pango:
+pango:
+pango:
+pango:
diff --git a/source/l/pango/update-pango-querymodules b/source/l/pango/update-pango-querymodules
new file mode 100644
index 00000000..5aefa034
--- /dev/null
+++ b/source/l/pango/update-pango-querymodules
@@ -0,0 +1,85 @@
+#! /bin/sh
+# Updates the pango.modules in /etc/pango/$host
+
+umask 022
+
+# Get the machine type from uname:
+host=$(uname -m)-slackware-linux
+
+# Fix $host for arm arch:
+case "$host" in
+  arm*) host=arm-slackware-linux-gnueabi ;;
+esac
+ 
+# Deriving /etc/pango/$host location
+#
+# We have had problems in the past with build systems
+# changing host from i386 to i686 and appending/dropping
+# the -gnu suffix, so try to match up the $host we got
+# with whats actually there.
+if [ ! -d /etc/pango/$host ]; then
+   case "$host" in
+     i?86*)
+         for d in $(ls -d /etc/pango/i?86*); do
+           host=$(basename $d)
+           break
+         done
+     ;;
+   esac
+fi
+
+FILE=/etc/pango/$host/pango.modules
+
+case "$host" in
+  s390x*|x86_64*)
+   if [ -x /usr/bin/pango-querymodules-64 ]; then
+     if [ "$1" = "--verbose" ]; then
+       echo "Updating pango.modules for ${host}:"
+       echo "  /usr/bin/pango-querymodules-64 \\"
+       echo "  > $FILE"
+     fi
+     /usr/bin/pango-querymodules-64 > $FILE
+     # Check for x86_64 multilib:
+     if ls -d /etc/pango/i?86* 1> /dev/null 2> /dev/null ; then
+       for d in $(ls -d /etc/pango/i?86*); do
+         mlhost=$(basename $d)
+         break
+       done
+       if [ -r /etc/pango/$mlhost/pango.modules -a -x /usr/bin/pango-querymodules-32 ]; then
+         FILE=/etc/pango/$mlhost/pango.modules
+         if [ "$1" = "--verbose" ]; then
+           echo "Updating pango.modules for ${mlhost}:"
+           echo "  /usr/bin/pango-querymodules-32 \\"
+           echo "  > $FILE"
+         fi
+         /usr/bin/pango-querymodules-32 > $FILE
+       fi
+     fi
+   else
+     if [ "$1" = "--verbose" ]; then
+       echo "Updating pango.modules for ${host}:"
+       echo "  /usr/bin/pango-querymodules \\"
+       echo "  > $FILE"
+     fi
+     /usr/bin/pango-querymodules > $FILE
+   fi
+   ;;
+  *)
+   if [ -x /usr/bin/pango-querymodules-32 ]; then
+     if [ "$1" = "--verbose" ]; then
+       echo "Updating pango.modules for ${host}:"
+       echo "  /usr/bin/pango-querymodules-32 \\"
+       echo "  > $FILE"
+     fi
+     /usr/bin/pango-querymodules-32 > $FILE
+   else
+     if [ "$1" = "--verbose" ]; then
+       echo "Updating pango.modules for ${host}:"
+       echo "  /usr/bin/pango-querymodules \\"
+       echo "  > $FILE"
+     fi
+     /usr/bin/pango-querymodules > $FILE
+   fi
+   ;;
+esac
+