Thu Sep 13 21:41:51 UTC 201820180913214151

a/sysvinit-scripts-2.1-noarch-20.txz:  Rebuilt.
  rc.6: it was reported by birdboy that JFS is not properly unmounted unless
  the order of unmounting local filesystems followed by remounting the root
  filesystem read-only is inverted. I tried that, and although it did get rid
  of a "/ filesystem is busy" error during shutdown, the JFS / filesystem was
  still checked at boot (and found to be clean). I believe that the existing
  order of unmounting non-root filesystems followed by remounting the root
  filesystem as read-only is the correct order, and found that putting
  another sync between these also gets rid of the error on shutdown, so I've
  done that. When using JFS as the root filesystem there's still another
  similar error message that's generated earlier in the boot, though. I'm
  unable to find any way to shut down a JFS root partition in a way that
  leaves it clean enough that fsck will not check it at boot, but it is always
  found to be clean so this should only be cosmetic. I recall this behavior of
  JFS going all the way back to when it was first added to the kernel. If
  anyone has a better fix, I'll take a look at it, but in my opinion it's not
  really anything to worry about.
ap/ghostscript-9.25-x86_64-1.txz:  Upgraded.
  This release fixes problems with argument handling, some unintended
  results of the security fixes to the SAFER file access restrictions
  (specifically accessing ICC profile files), and some additional
  security issues over the recent 9.24 release.
  For more information, see:
    https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2018-16509
  (* Security fix *)
ap/squashfs-tools-20180612_6e242dc-x86_64-1.txz:  Upgraded.
  Linked against libzstd.so.1. Thanks to alienBOB.
ap/sudo-1.8.25p1-x86_64-1.txz:  Upgraded.
d/binutils-2.31.1-x86_64-4.txz:  Rebuilt.
  Since baldzhang has pointed out a valid use case for windres on Linux,
  we are restoring the "Windows only" utilities, as none of them are
  very large and there may be valid uses for the other ones as well.
l/freetype-2.9.1-x86_64-2.txz:  Rebuilt.
  Patched to build properly if windres is present on the machine.
l/sg3_utils-1.44-x86_64-1.txz:  Upgraded.
l/zstd-1.3.5-x86_64-1.txz:  Added.
  Thanks to alienBOB.
xfce/tumbler-0.2.3-x86_64-1.txz:  Upgraded.
isolinux/initrd.img:  Rebuilt.
  Use the ter-114v terminus font. It has been reported that the font we were
  using (ter-v14v) restricts the available console colors from 16 to 8 due
  to needing an extra bit for the higher number of available glyphs (though
  in testing here I couldn't see any difference). The new font covers
  ISO8859-1, ISO8859-15, and Windows-1252 codepages. I'm still not sure it's
  the best choice, so additional input is welcomed.
  Thanks to bormant.
usb-and-pxe-installers/usbboot.img:  Rebuilt.
  Use the ter-114v terminus font.

4 files changed, 185 insertions, 0 deletions

diff --git a/source/l/zstd/slack-desc b/source/l/zstd/slack-desc
new file mode 100644
index 00000000..215674d5
--- /dev/null
+++ b/source/l/zstd/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':' except on otherwise blank lines.
+
+    |-----handy-ruler------------------------------------------------------|
+zstd: zstd (real-time compression algorithm)
+zstd:
+zstd: Zstandard, or zstd for short, is a real-time compression algorithm
+zstd: providing high compression ratios. It offers a very wide range of
+zstd: compression/speed trade-off, while being backed by a very fast
+zstd: decoder. It also offers a special mode for small data, called
+zstd: dictionary compression, and can create dictionaries from any sample
+zstd: set.
+zstd:
+zstd: Homepage: http://zstd.net/
+zstd:
diff --git a/source/l/zstd/zstd.SlackBuild b/source/l/zstd/zstd.SlackBuild
new file mode 100755
index 00000000..94a2388b
--- /dev/null
+++ b/source/l/zstd/zstd.SlackBuild
@@ -0,0 +1,152 @@
+#!/bin/sh
+# Copyright 2018  Eric Hameleers, Eindhoven, Netherlands
+# Copyright 2018  Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+#   Permission to use, copy, modify, and distribute this software for
+#   any purpose with or without fee is hereby granted, provided that
+#   the above copyright notice and this permission notice appear in all
+#   copies.
+#
+#   THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED OR IMPLIED
+#   WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#   MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+#   IN NO EVENT SHALL THE AUTHORS AND COPYRIGHT HOLDERS AND THEIR
+#   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+#   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+#   USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+#   ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+#   OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+#   OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+#   SUCH DAMAGE.
+# -----------------------------------------------------------------------------
+
+
+PKGNAM=zstd
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+NUMJOBS=${NUMJOBS:-" -j7 "}
+
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+  case "$(uname -m)" in
+    i?86) ARCH=i586 ;;
+    arm*) readelf /usr/bin/file -A | egrep -q "Tag_CPU.*[4,5]" && ARCH=arm || ARCH=armv7hl ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *) ARCH=$(uname -m) ;;
+  esac
+  export ARCH
+fi
+
+# If the variable PRINT_PACKAGE_NAME is set, then this script will report what
+# the name of the created package would be, and then exit. This information
+# could be useful to other scripts.
+if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
+  echo "$PKGNAM-$VERSION-$ARCH-$BUILD.txz"
+  exit 0
+fi
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  SLKLDFLAGS=""
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  SLKLDFLAGS=""
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  SLKLDFLAGS=""
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  SLKLDFLAGS="-L/usr/lib64"
+  LIBDIRSUFFIX="64"
+elif [ "$ARCH" = "armv7hl" ]; then
+  SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16"
+  SLKLDFLAGS=""
+  LIBDIRSUFFIX=""
+else
+  SLKCFLAGS="-O2"
+  SLKLDFLAGS=""
+  LIBDIRSUFFIX=""
+fi
+
+NUMJOBS=${NUMJOBS:-" -j7 "}
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z || exit 1
+cd $PKGNAM-$VERSION || exit 1
+
+zcat $CWD/zstd.dont.link.pzstd.to.static.libzstd.a.diff.gz | patch -p1 --verbose || exit 1
+
+# Make sure ownerships and permissions are sane:
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \; -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \;
+
+# Compile it:
+make $NUMJOBS CFLAGS="$SLKCFLAGS" || exit 1
+make $NUMJOBS CFLAGS="$SLKCFLAGS" -C contrib/pzstd || exit 1
+
+# Install it:
+make \
+  prefix=/usr \
+  libdir=/usr/lib${LIBDIRSUFFIX} \
+  mandir=/usr/man \
+  DESTDIR=$PKG \
+  install || exit 1
+install -Dm755 contrib/pzstd/pzstd $PKG/usr/bin/pzstd || exit 1
+
+# Don't ship static library:
+rm -f $PKG/usr/lib${LIBDIRSUFFIX}/*.a
+
+# zstdmt as the same as zstd, so just make a symlink:
+( cd $PKG/usr/bin
+  ln -sf zstd zstdmt
+)
+
+# Strip binaries:
+find $PKG | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+find $PKG | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+
+# Compress and link manpages, if any:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+# Add a documentation directory:
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
+cp -a \
+  CONTRIBUTING* COPYING* LICENSE NEWS README* TESTING* \
+  $PKG/usr/doc/$PKGNAM-$VERSION
+
+# Add a package description:
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+# Build package:
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
diff --git a/source/l/zstd/zstd.dont.link.pzstd.to.static.libzstd.a.diff b/source/l/zstd/zstd.dont.link.pzstd.to.static.libzstd.a.diff
new file mode 100644
index 00000000..577ba7b0
--- /dev/null
+++ b/source/l/zstd/zstd.dont.link.pzstd.to.static.libzstd.a.diff
@@ -0,0 +1,13 @@
+--- ./contrib/pzstd/Makefile.orig	2017-12-21 03:16:40.000000000 -0600
++++ ./contrib/pzstd/Makefile	2018-02-12 16:25:19.626150873 -0600
+@@ -171,8 +171,8 @@
+ 	$(TESTPROG) ./test/RoundTripTest$(EXT) $(TESTFLAGS)
+ 
+ # Build the main binary
+-pzstd$(EXT): main.o Options.o Pzstd.o SkippableFrame.o $(ZSTDDIR)/libzstd.a
+-	$(LD_COMMAND)
++pzstd$(EXT): main.o Options.o Pzstd.o SkippableFrame.o
++	$(LD_COMMAND) -L ../../lib -lzstd
+ 
+ # Target that depends on all the tests
+ .PHONY: tests
diff --git a/source/l/zstd/zstd.url b/source/l/zstd/zstd.url
new file mode 100644
index 00000000..0c9a52bc
--- /dev/null
+++ b/source/l/zstd/zstd.url
@@ -0,0 +1 @@
+https://github.com/facebook/zstd/archive/v1.3.3/zstd-1.3.3.tar.gz