Slackware 13.0slackware-13.0

Wed Aug 26 10:00:38 CDT 2009
Slackware 13.0 x86_64 is released as stable!  Thanks to everyone who
helped make this release possible -- see the RELEASE_NOTES for the
credits.  The ISOs are off to the replicator.  This time it will be a
6 CD-ROM 32-bit set and a dual-sided 32-bit/64-bit x86/x86_64 DVD.
We're taking pre-orders now at store.slackware.com.  Please consider
picking up a copy to help support the project.  Once again, thanks to
the entire Slackware community for all the help testing and fixing
things and offering suggestions during this development cycle.
As always, have fun and enjoy!  -P.

1 files changed, 134 insertions, 0 deletions

diff --git a/source/n/netatalk/netatalk.SlackBuild b/source/n/netatalk/netatalk.SlackBuild
new file mode 100755
index 00000000..1bffea9f
--- /dev/null
+++ b/source/n/netatalk/netatalk.SlackBuild
@@ -0,0 +1,134 @@
+#!/bin/sh
+
+# Copyright 2008, 2009  Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+VERSION=2.0.4
+ARCH=${ARCH:-x86_64}
+BUILD=${BUILD:-2}
+
+NUMJOBS=${NUMJOBS:-" -j7 "}
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-netatalk
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+cd $TMP
+rm -rf netatalk-$VERSION
+tar xvf $CWD/netatalk-$VERSION.tar.xz || exit 1
+cd netatalk-$VERSION || exit 1
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \; -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \;
+
+# Fixup some paths in etc2ps.sh
+zcat $CWD/netatalk.etc2ps.diff.gz | patch -p1 || exit 1
+
+# Allow building without xfs quota support
+zcat $CWD/netatalk-2.0.4-without_xfs.diff.gz | patch -p1 || exit 1
+
+# Disallow transmission of passwords via cleartext and with old version 1 of
+# the Diffie-Hellman protocol
+zcat $CWD/netatalk-2.0.4-afpdconf.diff.gz | patch -p1 || exit 1
+
+autoreconf -vif
+CFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --mandir=/usr/man \
+  --sysconfdir=/etc \
+  --libexecdir=/usr/sbin \
+  --localstatedir=/var \
+  --disable-static \
+  --with-shadow \
+  --without-xfs \
+  --build=$ARCH-slackware-linux
+
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" \
+  | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+
+gzip -9 $PKG/usr/man/man?/*
+
+# This is normally installed setuid root, but I'm not 100% sure I trust it yet.
+# I see it uses strcpy() in a few places...
+chmod 755 $PKG/usr/bin/afppasswd
+
+# Install the afppasswd config file
+mkdir -p $PKG/etc/netatalk
+cat $CWD/afppasswd > $PKG/etc/netatalk/afppasswd
+
+# Install an init script
+mkdir -p $PKG/etc/rc.d
+cat $CWD/rc.atalk.new > $PKG/etc/rc.d/rc.atalk.new
+chmod 644 $PKG/etc/rc.d/rc.atalk.new
+
+mkdir -p $PKG/install
+zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+( cd $PKG/etc/netatalk
+  for file in AppleVolumes.default AppleVolumes.system afpd.conf afppasswd atalkd.conf netatalk.conf papd.conf ; do
+    mv $file ${file}.new
+    echo "config etc/netatalk/${file}.new" >> $PKG/install/doinst.sh
+  done
+)
+echo "rm -f etc/netatalk/afppasswd.new" >> $PKG/install/doinst.sh
+
+mkdir -p $PKG/usr/doc/netatalk-$VERSION
+cp -a \
+  CONTRIBUTORS COPYING COPYRIGHT NEWS README TODO VERSION doc/* \
+  $PKG/usr/doc/netatalk-$VERSION
+# -1, Redundant
+rm -rf $PKG/usr/doc/netatalk-$VERSION/doc/Makefile* \
+       $PKG/usr/doc/netatalk-$VERSION/doc/htmldocs \
+       $PKG/usr/doc/netatalk-$VERSION/doc/*.pdf
+
+# "make install" creates this directory with chmod 0777
+# I'd rather use 755, but I'll assume since this is a
+# new directory that it is needed for something.  This
+# will help it a bit anyway...
+chmod 1777 $PKG/var/spool/netatalk
+# If anyone can confirm that 755 would still work let me know.
+
+# Build the package:
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/netatalk-$VERSION-$ARCH-$BUILD.txz
+