Slackware 13.0slackware-13.0

Wed Aug 26 10:00:38 CDT 2009
Slackware 13.0 x86_64 is released as stable!  Thanks to everyone who
helped make this release possible -- see the RELEASE_NOTES for the
credits.  The ISOs are off to the replicator.  This time it will be a
6 CD-ROM 32-bit set and a dual-sided 32-bit/64-bit x86/x86_64 DVD.
We're taking pre-orders now at store.slackware.com.  Please consider
picking up a copy to help support the project.  Once again, thanks to
the entire Slackware community for all the help testing and fixing
things and offering suggestions during this development cycle.
As always, have fun and enjoy!  -P.

16 files changed, 1461 insertions, 0 deletions

diff --git a/source/n/network-scripts/scripts/HOSTNAME b/source/n/network-scripts/scripts/HOSTNAME
new file mode 100644
index 00000000..409452f7
--- /dev/null
+++ b/source/n/network-scripts/scripts/HOSTNAME
@@ -0,0 +1 @@
+darkstar.example.net
diff --git a/source/n/network-scripts/scripts/host.conf b/source/n/network-scripts/scripts/host.conf
new file mode 100644
index 00000000..a659e913
--- /dev/null
+++ b/source/n/network-scripts/scripts/host.conf
@@ -0,0 +1,2 @@
+order hosts, bind
+multi on
diff --git a/source/n/network-scripts/scripts/hosts b/source/n/network-scripts/scripts/hosts
new file mode 100644
index 00000000..2c26f958
--- /dev/null
+++ b/source/n/network-scripts/scripts/hosts
@@ -0,0 +1,19 @@
+#
+# hosts		This file describes a number of hostname-to-address
+#		mappings for the TCP/IP subsystem.  It is mostly
+#		used at boot time, when no name servers are running.
+#		On small systems, this file can be used instead of a
+#		"named" name server.  Just add the names, addresses
+#		and any aliases to this file...
+#
+# By the way, Arnt Gulbrandsen <agulbra@nvg.unit.no> says that 127.0.0.1
+# should NEVER be named with the name of the machine.  It causes problems
+# for some (stupid) programs, irc and reputedly talk. :^)
+#
+
+# For loopbacking.
+127.0.0.1		localhost
+127.0.0.1	 	darkstar.example.net darkstar
+
+# End of hosts.
+
diff --git a/source/n/network-scripts/scripts/hosts.allow b/source/n/network-scripts/scripts/hosts.allow
new file mode 100644
index 00000000..d375b5f8
--- /dev/null
+++ b/source/n/network-scripts/scripts/hosts.allow
@@ -0,0 +1,12 @@
+#
+# hosts.allow	This file describes the names of the hosts which are
+#		allowed to use the local INET services, as decided by
+#		the '/usr/sbin/tcpd' server.
+#
+# Version:	@(#)/etc/hosts.allow	1.00	05/28/93
+#
+# Author:	Fred N. van Kempen, <waltje@uwalt.nl.mugnet.org
+#
+#
+
+# End of hosts.allow.
diff --git a/source/n/network-scripts/scripts/hosts.deny b/source/n/network-scripts/scripts/hosts.deny
new file mode 100644
index 00000000..c0db7e91
--- /dev/null
+++ b/source/n/network-scripts/scripts/hosts.deny
@@ -0,0 +1,12 @@
+#
+# hosts.deny	This file describes the names of the hosts which are
+#		*not* allowed to use the local INET services, as decided
+#		by the '/usr/sbin/tcpd' server.
+#
+# Version:	@(#)/etc/hosts.deny	1.00	05/28/93
+#
+# Author:	Fred N. van Kempen, <waltje@uwalt.nl.mugnet.org
+#
+#
+
+# End of hosts.deny.
diff --git a/source/n/network-scripts/scripts/hosts.equiv b/source/n/network-scripts/scripts/hosts.equiv
new file mode 100644
index 00000000..cb371ea3
--- /dev/null
+++ b/source/n/network-scripts/scripts/hosts.equiv
@@ -0,0 +1,14 @@
+#
+# hosts.equiv	This file describes the names of the hosts which are
+#		to be considered "equivalent", i.e. which are to be
+#		trusted enought for allowing rsh(1) commands.
+#
+# Version:	@(#)/etc/hosts.equiv	2.00	04/30/93
+#
+# Author:	Fred N. van Kempen, <waltje@uwalt.nl.mugnet.org>
+#
+#
+
+localhost
+
+# End of hosts.equiv.
diff --git a/source/n/network-scripts/scripts/netconfig b/source/n/network-scripts/scripts/netconfig
new file mode 100644
index 00000000..04afd698
--- /dev/null
+++ b/source/n/network-scripts/scripts/netconfig
@@ -0,0 +1,632 @@
+#!/bin/sh
+# A script to do basic network configuration.
+# Mostly written by Patrick Volkerding <volkerdi@slackware.com>.
+# Modified to use /etc/rc.d/rc.inet1.conf Tue Aug 26 16:51:48 PDT 2003 <pjv>
+
+write_config_files() {
+#
+############################################################################
+#			  The rc.inet1.conf file.
+############################################################################
+#
+
+# If we're doing loopback, we don't want 127.0.0.1 and 255.255.255.0 in
+# rc.inet1.conf... it's better to leave the values null.  However, since
+# we use the IP in other places, we need to make a copy for here.
+RCIPCOPY=$IPADDR
+RCMASKCOPY=$NETMASK
+if [ "$RCIPCOPY" = "127.0.0.1" ]; then
+  RCIPCOPY=""
+  RCMASKCOPY=""
+fi
+
+# echo "Creating /$RC..."
+/bin/cat << ENDFILE > $RC
+# /etc/rc.d/rc.inet1.conf
+#
+# This file contains the configuration settings for network interfaces.
+# If USE_DHCP[interface] is set to "yes", this overrides any other settings.
+# If you don't have an interface, leave the settings null ("").
+
+# You can configure network interfaces other than eth0,eth1... by setting
+# IFNAME[interface] to the interface's name. If IFNAME[interface] is unset
+# or empty, it is assumed you're configuring eth<interface>.
+
+# Several other parameters are available, the end of this file contains a
+# comprehensive set of examples.
+
+# =============================================================================
+
+# Config information for eth0:
+IPADDR[0]="$RCIPCOPY"
+NETMASK[0]="$RCMASKCOPY"
+USE_DHCP[0]="$USE_DHCP"
+DHCP_HOSTNAME[0]="$DHCP_HOSTNAME"
+
+# Config information for eth1:
+IPADDR[1]=""
+NETMASK[1]=""
+USE_DHCP[1]=""
+DHCP_HOSTNAME[1]=""
+
+# Config information for eth2:
+IPADDR[2]=""
+NETMASK[2]=""
+USE_DHCP[2]=""
+DHCP_HOSTNAME[2]=""
+
+# Config information for eth3:
+IPADDR[3]=""
+NETMASK[3]=""
+USE_DHCP[3]=""
+DHCP_HOSTNAME[3]=""
+
+# Default gateway IP address:
+GATEWAY="$GATEWAY"
+
+# Change this to "yes" for debugging output to stdout.  Unfortunately,
+# /sbin/hotplug seems to disable stdout so you'll only see debugging output
+# when rc.inet1 is called directly.
+DEBUG_ETH_UP="no"
+
+## Example config information for wlan0.  Uncomment the lines you need and fill
+## in your info.  (You may not need all of these for your wireless network)
+#IFNAME[4]="wlan0"
+#IPADDR[4]=""
+#NETMASK[4]=""
+#USE_DHCP[4]="yes"
+#DHCP_HOSTNAME[4]="icculus-wireless"
+#DHCP_KEEPRESOLV[4]="yes"
+#DHCP_KEEPNTP[4]="yes"
+#DHCP_KEEPGW[4]="yes"
+#DHCP_IPADDR[4]=""
+#WLAN_ESSID[4]=BARRIER05
+#WLAN_MODE[4]=Managed
+##WLAN_RATE[4]="54M auto"
+##WLAN_CHANNEL[4]="auto"
+##WLAN_KEY[4]="D5AD1F04ACF048EC2D0B1C80C7"
+##WLAN_IWPRIV[4]="set AuthMode=WPAPSK | set EncrypType=TKIP | set WPAPSK=96389dc66eaf7e6efd5b5523ae43c7925ff4df2f8b7099495192d44a774fda16"
+#WLAN_WPA[4]="wpa_supplicant"
+#WLAN_WPADRIVER[4]="ndiswrapper"
+
+## Some examples of additional network parameters that you can use.
+## Config information for wlan0:
+#IFNAME[4]="wlan0"              # Use a different interface name nstead of
+                                # the default 'eth4'
+#HWADDR[4]="00:01:23:45:67:89"  # Overrule the card's hardware MAC address
+#MTU[4]=""                      # The default MTU is 1500, but you might need
+                                # 1360 when you use NAT'ed IPSec traffic.
+#DHCP_KEEPRESOLV[4]="yes"       # If you dont want /etc/resolv.conf overwritten
+#DHCP_KEEPNTP[4]="yes"          # If you don't want ntp.conf overwritten
+#DHCP_KEEPGW[4]="yes"           # If you don't want the DHCP server to change
+                                # your default gateway
+#DHCP_IPADDR[4]=""              # Request a specific IP address from the DHCP
+                                # server
+#WLAN_ESSID[4]=DARKSTAR         # Here, you can override _any_ parameter
+                                # defined in rc.wireless.conf, by prepending
+                                # 'WLAN_' to the parameter's name. Useful for
+                                # those with multiple wireless interfaces.
+#WLAN_IWPRIV[4]="set AuthMode=WPAPSK | set EncrypType=TKIP | set WPAPSK=thekey"
+                                # Some drivers require a private ioctl to be
+                                # set through the iwpriv command. If more than
+                                # one is required, you can place them in the
+                                # IWPRIV parameter (separated with the pipe (|)
+                                # character, see the example).
+ENDFILE
+#
+############################################################################
+#			  The networks file.
+############################################################################
+#
+#echo "Creating /$ETCNETWORKS..."
+/bin/cat <<EOF >$ETCNETWORKS
+#
+# networks	This file describes a number of netname-to-address
+#		mappings for the TCP/IP subsystem.  It is mostly
+#		used at boot time, when no name servers are running.
+#
+
+loopback	127.0.0.0
+localnet	$NETWORK
+
+# End of networks.
+EOF
+chmod 644 $ETCNETWORKS
+#
+############################################################################
+#			   The hosts file.
+############################################################################
+#
+#echo "Creating /$HOSTS..."
+/bin/cat << EOF > $HOSTS
+#
+# hosts		This file describes a number of hostname-to-address
+#		mappings for the TCP/IP subsystem.  It is mostly
+#		used at boot time, when no name servers are running.
+#		On small systems, this file can be used instead of a
+#		"named" name server.  Just add the names, addresses
+#		and any aliases to this file...
+#
+# By the way, Arnt Gulbrandsen <agulbra@nvg.unit.no> says that 127.0.0.1
+# should NEVER be named with the name of the machine.  It causes problems
+# for some (stupid) programs, irc and reputedly talk. :^)
+#
+
+# For loopbacking.
+127.0.0.1		localhost
+$IPADDR		$HOSTNM.$DOMAIN $HOSTNM
+
+# End of hosts.
+
+EOF
+chmod 644 $HOSTS
+#
+############################################################################
+#			The resolv.conf file.
+############################################################################
+#
+if [ ! "$NAMESERVER" = "" ]; then
+  echo "search $DOMAIN" >$RESOLV
+  echo "nameserver $NAMESERVER" >>$RESOLV
+else
+  echo "search $DOMAIN" >$RESOLV
+fi
+if [ -f $RESOLV ]; then
+  chmod 644 $RESOLV
+fi
+#
+############################################################################
+#			The rc.netdevice file.
+############################################################################
+#
+if [ -r /cardfound ]; then
+  if [ ! "`cat /cardfound`" = "" ]; then
+    cat << EOF > etc/rc.d/rc.netdevice
+# Load module for network device.
+# This script is automatically generated during the installation.
+
+/sbin/modprobe `cat /cardfound`
+
+EOF
+    chmod 755 etc/rc.d/rc.netdevice
+  fi
+fi
+rm -f $TMP/tempmsg /cardfound
+} # end write_config_files
+
+TMP=/var/log/setup/tmp
+if [ ! -d $TMP ]; then
+ mkdir -p $TMP
+ chmod 700 $TMP
+fi
+
+# This checks IP address syntax.
+# usage: syntax_check ADDRESS #-OF-EXPECTED-SEGMENTS (up to 4)
+# example: syntax_check 123.22.43.1 4
+# returns: 0=found correct  1=too many fields  2=non numeric field found
+syntax_check_color() {
+  RET_CODE=0 
+  SCRATCH=$1
+  SCRATCH=`echo $SCRATCH | tr "." "/"`
+  INDEX=$2
+  while [ ! "$INDEX" = "0" ]; do
+    # OK, so I'm a LISP-head :^)
+    FIELD=`basename $SCRATCH`
+    SCRATCH=`dirname $SCRATCH`
+    if expr $FIELD + 1 1> /dev/null 2> /dev/null; then
+      true
+    else
+      RET_CODE=2; # non-numeric field
+    fi
+    INDEX=`expr $INDEX - 1`
+  done
+  if [ ! "$SCRATCH" = "." ]; then
+    RET_CODE=1; # too many arguments
+  fi
+  if [ "$3" = "WARN" -a ! "$RET_CODE" = "0" ]; then
+    cat << EOF > $TMP/tempmsg
+
+The address you have entered seems to be non-standard. We were expecting
+$2 groups of numbers seperated by dots, like: 127.0.0.1
+Are you absolutely sure you want to use the address $1?
+
+EOF
+    dialog --title "WARNING" --yesno "`cat $TMP/tempmsg`" 9 72
+    if [ $? = 0 ]; then
+      RET_CODE = 0;
+    fi
+    rm -r $TMP/tempmsg
+  else
+    if [ "$3" = "ECHO" ]; then
+      echo $RET_CODE;
+    fi
+  fi
+  return $RET_CODE;
+}
+
+# Figure out where we are...  cheap hack.
+if [ ! -e etc/slackware-version -a ! -e /etc/installer -a ! -e bin/bash ]; then
+  cd /
+fi;
+
+# IMPORTANT!!! NO LEADING '/' in the paths below, or this script will not
+# function from the bootdisk.
+RC=etc/rc.d/rc.inet1.conf		# Where rc.inet1.conf file is.
+RESOLV=etc/resolv.conf			# Where resolv.conf file is.
+HOSTS=etc/hosts			 	# Where hosts file is.
+ETCNETWORKS=etc/networks		# Where networks file is.
+USE_DHCP=""                             # Use DHCP?  "" == no.
+DHCP_HOSTNAME=""                        # This is our DHCP hostname.
+#
+# defaults:
+NETWORK=127.0.0.0
+IPADDR=127.0.0.1
+NETMASK=255.255.255.0
+
+
+# Main loop:
+while [ 0 ]; do
+cat << EOF > $TMP/tempmsg
+First, we'll need the name you'd like to give your host.
+Only the base hostname is needed right now. (not the domain)
+
+Enter hostname:
+EOF
+ dialog --title "ENTER HOSTNAME" --inputbox "`cat $TMP/tempmsg`" 11 65 \
+ $HOSTNM 2> $TMP/SeThost
+ if [ $? = 1 -o $? = 255 ]; then
+  rm -f $TMP/SeThost $TMP/tempmsg
+  exit
+ fi
+ HOSTNM="`cat $TMP/SeThost`"
+ rm -f $TMP/SeThost $TMP/tempmsg
+ if [ ! "$HOSTNM" = "" ]; then
+  break;
+ fi
+done
+
+while [ 0 ]; do
+cat << EOF > $TMP/tempmsg
+Now, we need the domain name for this machine, such as:
+
+example.org
+
+Do not supply a leading '.'
+
+Enter domain name for $HOSTNM: 
+EOF
+ dialog --title "ENTER DOMAINNAME FOR '$HOSTNM'" --inputbox \
+"`cat $TMP/tempmsg`" \
+14 64 $DOMAIN 2> $TMP/SeTdom
+ if [ $? = 1 -o $? = 255 ]; then
+  rm -f $TMP/SeTdom $TMP/tempmsg
+  exit
+ fi
+ DOMAIN="`cat $TMP/SeTdom`"
+ rm -f $TMP/SeTdom $TMP/tempmsg
+ if [ ! "$DOMAIN" = "" ]; then
+  break;
+ fi
+done
+
+echo $HOSTNM.$DOMAIN > etc/HOSTNAME
+
+dialog --title "SETUP IP ADDRESS FOR '$HOSTNM.$DOMAIN'" \
+--default-item DHCP \
+--menu \
+"Now we need to know how your machine connects to the network.\n\
+If you have an internal network card and an assigned IP address, gateway, \
+and DNS, use the 'static IP' choice to enter these values.  If your IP \
+address is assigned by a DHCP server (commonly used by cable modem and DSL \
+services), select 'DHCP'.  If you do not have a network card, select \
+the 'loopback' choice.  'loopback' is also the correct choice if your \
+only connection to the network will be through a serial modem \
+(with SLIP or PPP), or if you are using a laptop network card (these \
+are configured in /etc/pcmcia/). What type of network connection \
+best describes your machine?" 20 70 3 \
+"static IP" "Use a static IP address to configure ethernet" \
+"DHCP" "Use a DHCP server to configure ethernet" \
+"loopback" "Set up a loopback connection (modem or no net)" 2> $TMP/reply
+if [ $? = 1 -o $? = 255 ]; then
+  rm -f $TMP/reply
+  exit
+fi
+REPLY=`cat $TMP/reply`
+rm -f $TMP/reply
+
+if [ "$REPLY" = "DHCP" ]; then
+  USE_DHCP="yes"
+  dialog --title "SET DHCP HOSTNAME"  --inputbox "Some network providers require \
+that the DHCP hostname be set in order to connect.  If so, they'll have assigned \
+a hostname to your machine, which may look something like CC-NUMBER-A (this \
+depends on your ISP).  If you were assigned a DHCP hostname, please enter it \
+below.  If you do not have a DHCP hostname, just hit ENTER or Cancel." 13 62 \
+2> $TMP/SeTDHCPHOST
+  NEW_DHCPHOST="`cat $TMP/SeTDHCPHOST`"
+  rm -f $TMP/SeTDHCPHOST
+  # OK, if we actually got something, use it.
+  DHCP_HOSTNAME="$NEW_DHCPHOST"
+elif [ "$REPLY" = "loopback" ]; then
+  LOOPBACK="yes"
+else
+  LOOPBACK="no"
+fi
+
+if [ "$LOOPBACK" = "no" -a ! "$USE_DHCP" = "yes" ]; then
+
+ while [ 0 ]; do
+  if [ -r $TMP/SeTIP ]; then
+   IPADDR=`cat $TMP/SeTIP`
+  fi
+  cat << EOF > $TMP/tempmsg
+Enter your IP address for the local machine.  Example: 
+111.112.113.114
+Enter IP address for $HOSTNM (aaa.bbb.ccc.ddd): 
+EOF
+  dialog --title "ENTER IP ADDRESS FOR '$HOSTNM.$DOMAIN'" --inputbox \
+"`cat $TMP/tempmsg`" \
+10 68 $IPADDR 2> $TMP/SeTlip
+  if [ $? = 1 -o $? = 255 ]; then
+   rm -f $TMP/SeTlip $TMP/tempmsg
+   exit
+  fi
+  IPADDR="`cat $TMP/SeTlip`"
+  rm -f $TMP/SeTlip $TMP/tempmsg
+  if [ "$IPADDR" = "" ]; then
+   continue;
+  fi
+  syntax_check_color $IPADDR 4 WARN
+  if [ $? = 0 ]; then
+   echo $IPADDR > $TMP/SeTIP
+   break;
+  fi
+ done
+
+ while [ 0 ]; do
+  if [ -r $TMP/SeTnetmask ]; then
+   NETMASK=`cat $TMP/SeTnetmask`
+  fi
+  cat << EOF > $TMP/tempmsg
+Enter your netmask.  This will generally look something
+like this: 255.255.255.0
+Enter netmask (aaa.bbb.ccc.ddd):
+EOF
+  dialog --title "ENTER NETMASK FOR LOCAL NETWORK" --inputbox \
+"`cat $TMP/tempmsg`" \
+10 65 $NETMASK 2> $TMP/SeTnmask
+  if [ $? = 1 -o $? = 255 ]; then
+   rm -f $TMP/SeTnmask $TMP/tempmsg
+   exit
+  fi
+  NETMASK="`cat $TMP/SeTnmask`"
+  rm -f $TMP/SeTnmask $TMP/tempmsg
+  if [ "$NETMASK" = "" ]; then
+   continue;
+  fi
+  syntax_check_color $NETMASK 4 WARN
+  if [ $? = 0 ]; then
+   echo $NETMASK > $TMP/SeTnetmask
+   break;
+  fi
+ done
+ 
+ # Set broadcast/network addresses automatically:
+ BROADCAST=`ipmask $NETMASK $IPADDR | cut -f 1 -d ' '`
+ NETWORK=`ipmask $NETMASK $IPADDR | cut -f 2 -d ' '`
+
+ while [ 0 ]; do
+  if [ -r $TMP/SeTgateway ]; then
+   GATEWAY=`cat $TMP/SeTgateway`
+  fi
+  cat << EOF > $TMP/tempmsg
+Enter the address for the gateway on your network, such as:
+`echo $IPADDR | cut -f 1-3 -d .`.1
+
+If you don't have a gateway on your network just hit ENTER
+without entering a gateway IP address.
+
+Enter gateway address (aaa.bbb.ccc.ddd):
+EOF
+  dialog --title "ENTER GATEWAY ADDRESS" --inputbox "`cat $TMP/tempmsg`" \
+  14 64 $GATEWAY 2> $TMP/SeTgate
+  if [ $? = 1 -o $? = 255 ]; then
+   rm -f $TMP/SeTgate $TMP/tempmsg
+   exit
+  fi
+  GATEWAY="`cat $TMP/SeTgate`"
+  rm -f $TMP/SeTgate $TMP/tempmsg
+  if [ "$GATEWAY" = "" ]; then
+    echo > $TMP/SeTgateway
+    break;
+  fi
+  syntax_check_color $GATEWAY 4 WARN
+  if [ $? = 0 ]; then
+    echo $GATEWAY > $TMP/SeTgateway
+    break;
+  fi
+ done
+fi
+
+if [ "$LOOPBACK" = "no" ]; then
+ dialog --title "USE A NAMESERVER?" --yesno "Will you be accessing a \
+nameserver?" 5 42
+ if [ $? = 0 ]; then
+  if [ ! "`cat $TMP/SeTns 2> /dev/null`" = "" ]; then
+    DNSSAMPLE="`cat $TMP/SeTns 2> /dev/null`"
+  elif [ "$GATEWAY" = "" ]; then
+    DNSSAMPLE=`echo $IPADDR | cut -f 1-3 -d .`
+  else
+    DNSSAMPLE=$GATEWAY
+  fi
+  while [ "$NAMESERVER" = "" ]; do
+   cat << EOF > $TMP/tempmsg
+Here is your current IP address, full hostname, and base hostname:
+$IPADDR       $HOSTNM.$DOMAIN    $HOSTNM
+
+Please give the IP address of the name server to use,
+such as $DNSSAMPLE.
+
+You can add more Domain Name Servers later by editing /$RESOLV.
+
+Primary name server to use (aaa.bbb.ccc.ddd): 
+EOF
+   dialog --title "SELECT NAMESERVER" --inputbox \
+"`cat $TMP/tempmsg`" 17 72 $DNSSAMPLE 2> $TMP/SeTns
+   if [ $? = 1 -o $? = 255 ]; then
+    rm -f $TMP/tempmsg $TMP/SeTns 
+    break
+   fi
+   NAMESERVER="`cat $TMP/SeTns`"
+   rm -f $TMP/tempmsg $TMP/SeTns 
+  done
+ fi
+fi
+
+# Check for existing network driver:
+unset DONOTPROBE
+if cat /proc/net/dev | grep eth0 1> /dev/null 2> /dev/null ; then
+  DONOTPROBE=true 
+fi
+
+# Really, this rc.netdevice thing is mostly obsolete except for
+# handmade local scripts anyway, these days with udev...
+# So, we'll skip it:
+DONOTPROBE=true
+
+if [ -d lib/modules/`uname -r` \
+     -a ! "$LOOPBACK" = "yes" \
+     -a ! -x etc/rc.d/rc.hotplug \
+     -a ! "$DONOTPROBE" = "true" \
+     -a ! -r /cardfound ]; then
+  dialog --title "PROBE FOR NETWORK CARD?" --menu "If you like, we \
+can look to see what kind of network card you have in your machine, and \
+if we find one create an /etc/rc.d/rc.netdevice script to load the module \
+for it at boot time.  There's a slight bit of danger that the probing \
+can cause problems, but it almost always works.  If you'd rather configure \
+your system manually, you can skip the probing process and edit \
+/etc/rc.d/rc.modules or /etc/modules.conf later to have it load the right module." \
+16 68 2 \
+"probe" "look for network cards to set up" \
+"skip" "skip probe;  edit /etc/rc.d/rc.modules later" 2> $TMP/reply
+  if [ $? = 1 -o $? = 255 ]; then
+    rm -f $TMP/reply
+    exit
+  fi
+  REPLY=`cat $TMP/reply`
+  rm -f $TMP/reply
+  if [ ! "$REPLY" = "skip" ]; then
+    for card in 3c59x 82596 dgrs eepro100 e1000 epic100 hp100 lance \
+    ne2k-pci olympic pcnet32 rcpci 8139too 8139cp tlan tulip via-rhine \
+    yellowfin natsemi ; do
+      chroot . /sbin/modprobe $card 2> /dev/null
+      if [ $? = 0 ]; then
+        dialog --title "CARD DETECTED" --msgbox "A networking card using \
+the $card.o module has been detected." 5 72
+        echo "$card" > /cardfound
+        break;
+      fi
+     done
+     if [ ! -r /cardfound ]; then
+       # Don't probe for com20020, because it doesn't check and will always load.
+       # Don't probe for arlan, because it needs irq= to work.
+       # Don't probe for com90io or com90xx because they taint the kernel.
+       for card in depca ibmtr 3c359 3c501 3c503 3c505 3c507 3c509 3c515 ac3200 \
+         abyss acenic at1700 cosa cs89x0 de4x5 de600 \
+         de620 dmfe dl2k e2100 eepro eexpress eth16i ewrk3 fealnx hamachi hostess_sv11 \
+         hp-plus hp lanstreamer ni5010 ni52 ni65 ns83820 sb1000 sealevel sis900 sk98lin skfp smc-ultra \
+         smc9194 smctr starfire sungem sunhme tg3 wd e100 iph5526 lp486e tmspci winbond-840 ; do
+         chroot . /sbin/modprobe $card 2> /dev/null
+         if [ $? = 0 ]; then
+           dialog --title "CARD DETECTED" --msgbox "A networking card using \
+the $card.o module has been detected." 5 72
+           echo "$card" > /cardfound
+           break
+         fi
+       done
+     fi
+     if [ ! -r /cardfound ]; then
+       dialog --title "NO CARD DETECTED" --msgbox "Sorry, but no network \
+card could be probed for on your system.  Some cards (like non-PCI NE2000s) \
+must be supplied with the I/O address to use and can't be probed for safely. \
+You'll have to try to configure the card later by editing \
+/etc/rc.d/rc.modules or recompiling your kernel." 9 70
+     fi
+  fi
+fi
+
+if [ "$LOOPBACK" = "yes" ]; then
+  dialog --title "NETWORK SETUP COMPLETE" --yesno "Your networking \
+system is now configured to use loopback:
+
+IP address: 127.0.0.1
+Netmask: 255.255.255.0
+
+Is this correct?  Press 'Yes' to continue, or 'No' to reconfigure." 0 0
+  RETVAL=$?
+elif [ "$USE_DHCP" = "" ]; then
+  while [ 0 ]; do
+    dialog --title "CONFIRM NETWORK SETUP" \
+--ok-label Accept \
+--extra-label Edit \
+--cancel-label Restart \
+--inputmenu \
+"These are the settings you have entered.  To accept them and complete \
+the networking setup, press enter.  If you need to make any changes, you \
+can do that now (or reconfigure later using 'netconfig')." \
+22 60 12 \
+"Hostname:" "$HOSTNM" \
+"Domain name:" "$DOMAIN" \
+"IP address:" "$IPADDR" \
+"Netmask:" "$NETMASK" \
+"Gateway:" "$GATEWAY" \
+"Nameserver:" "$NAMESERVER" 2> $TMP/tempmsg
+    RETVAL=$?
+    if [ "$RETVAL" = "3" ]; then
+      FIELD=`cat $TMP/tempmsg | cut -f 1 -d : | cut -f 2- -d ' '`
+      NEWVAL=`cat $TMP/tempmsg | cut -f 2 -d : | cut -f 2- -d ' '`
+      if [ "$FIELD" = "Hostname" ]; then
+        HOSTNM=$NEWVAL
+      elif [ "$FIELD" = "Domain name" ]; then
+        DOMAIN=$NEWVAL
+      elif [ "$FIELD" = "IP address" ]; then
+        IPADDR=$NEWVAL
+      elif [ "$FIELD" = "Netmask" ]; then
+        NETMASK=$NEWVAL
+      elif [ "$FIELD" = "Gateway" ]; then
+        GATEWAY=$NEWVAL
+      elif [ "$FIELD" = "Nameserver" ]; then
+        NAMESERVER=$NEWVAL
+      fi
+    else
+      break
+    fi
+  done
+else # DHCP was used
+  dialog --title "CONFIRM SETUP COMPLETE" \
+--yesno "Your networking system is now configured to use DHCP:
+
+  Hostname:     $HOSTNM
+  Domain name:  $DOMAIN
+  IP address:   (use DHCP server)
+  Netmask:      (use DHCP server)
+  Gateway:      (use DHCP server)
+  Nameserver:   (use DHCP server)
+
+Is this correct?  Press 'Yes' to continue, or 'No' to reconfigure." 0 0
+  RETVAL=$?
+fi
+
+if [ "$RETVAL" = "0" ]; then
+  echo $HOSTNM.$DOMAIN > etc/HOSTNAME
+  write_config_files
+  if [ "$1" = "" ]; then
+    dialog --msgbox "Settings accepted.  Basic network configuration is complete." 6 40
+  fi
+else
+  if [ "$1" = "" ]; then
+    dialog --msgbox "Settings discarded.  Run the 'netconfig' command again if you need to reconfigure your network settings." 6 60
+  fi
+fi
+
+exit $RETVAL
+
diff --git a/source/n/network-scripts/scripts/networks b/source/n/network-scripts/scripts/networks
new file mode 100644
index 00000000..50d5162e
--- /dev/null
+++ b/source/n/network-scripts/scripts/networks
@@ -0,0 +1,10 @@
+#
+# networks	This file describes a number of netname-to-address
+#		mappings for the TCP/IP subsystem.  It is mostly
+#		used at boot time, when no name servers are running.
+#
+
+loopback	127.0.0.0
+localnet	127.0.0.0
+
+# End of networks.
diff --git a/source/n/network-scripts/scripts/nntpserver b/source/n/network-scripts/scripts/nntpserver
new file mode 100644
index 00000000..3fa9a61b
--- /dev/null
+++ b/source/n/network-scripts/scripts/nntpserver
@@ -0,0 +1 @@
+news.my_news_server.com
diff --git a/source/n/network-scripts/scripts/protocols b/source/n/network-scripts/scripts/protocols
new file mode 100644
index 00000000..db3254c9
--- /dev/null
+++ b/source/n/network-scripts/scripts/protocols
@@ -0,0 +1,146 @@
+#
+# Internet protocols
+#
+# $FreeBSD: src/etc/protocols,v 1.16 2002/02/10 08:19:58 dd Exp $
+#	from: @(#)protocols	5.1 (Berkeley) 4/17/89
+#
+# See also http://www.iana.org/assignments/protocol-numbers
+#
+ip	0	IP		# internet protocol, pseudo protocol number
+#hopopt	0	HOPOPT		# hop-by-hop options for ipv6
+icmp	1	ICMP		# internet control message protocol
+igmp	2	IGMP		# internet group management protocol
+ggp	3	GGP		# gateway-gateway protocol
+ipencap	4	IP-ENCAP	# IP encapsulated in IP (officially ``IP'')
+st2	5	ST2		# ST2 datagram mode (RFC 1819)
+tcp	6	TCP		# transmission control protocol
+cbt	7	CBT		# CBT, Tony Ballardie <A.Ballardie@cs.ucl.ac.uk>
+egp	8	EGP		# exterior gateway protocol
+igp	9	IGP		# any private interior gateway (Cisco: for IGRP)
+bbn-rcc	10	BBN-RCC-MON	# BBN RCC Monitoring
+nvp	11	NVP-II		# Network Voice Protocol
+pup	12	PUP		# PARC universal packet protocol
+argus	13	ARGUS		# ARGUS
+emcon	14	EMCON		# EMCON
+xnet	15	XNET		# Cross Net Debugger
+chaos	16	CHAOS		# Chaos
+udp	17	UDP		# user datagram protocol
+mux	18	MUX		# Multiplexing protocol
+dcn	19	DCN-MEAS	# DCN Measurement Subsystems
+hmp	20	HMP		# host monitoring protocol
+prm	21	PRM		# packet radio measurement protocol
+xns-idp	22	XNS-IDP		# Xerox NS IDP
+trunk-1	23	TRUNK-1		# Trunk-1
+trunk-2	24	TRUNK-2		# Trunk-2
+leaf-1	25	LEAF-1		# Leaf-1
+leaf-2	26	LEAF-2		# Leaf-2
+rdp	27	RDP		# "reliable datagram" protocol
+irtp	28	IRTP		# Internet Reliable Transaction Protocol
+iso-tp4	29	ISO-TP4		# ISO Transport Protocol Class 4
+netblt	30	NETBLT		# Bulk Data Transfer Protocol
+mfe-nsp	31	MFE-NSP		# MFE Network Services Protocol
+merit-inp	32	MERIT-INP	# MERIT Internodal Protocol
+sep	33	SEP		# Sequential Exchange Protocol
+3pc	34	3PC		# Third Party Connect Protocol
+idpr	35	IDPR		# Inter-Domain Policy Routing Protocol
+xtp	36	XTP		# Xpress Tranfer Protocol
+ddp	37	DDP		# Datagram Delivery Protocol
+idpr-cmtp	38	IDPR-CMTP	# IDPR Control Message Transport Proto
+tp++	39	TP++		# TP++ Transport Protocol
+il	40	IL		# IL Transport Protocol
+ipv6	41	IPV6		# ipv6
+sdrp	42	SDRP		# Source Demand Routing Protocol
+ipv6-route	43	IPV6-ROUTE	# routing header for ipv6
+ipv6-frag	44	IPV6-FRAG	# fragment header for ipv6
+idrp	45	IDRP		# Inter-Domain Routing Protocol
+rsvp	46	RSVP		# Resource ReSerVation Protocol
+gre	47	GRE		# Generic Routing Encapsulation
+mhrp	48	MHRP		# Mobile Host Routing Protocol
+bna	49	BNA		# BNA
+esp	50	ESP		# encapsulating security payload
+ah	51	AH		# authentication header
+i-nlsp	52	I-NLSP		# Integrated Net Layer Security TUBA
+swipe	53	SWIPE		# IP with Encryption
+narp	54	NARP		# NBMA Address Resolution Protocol
+mobile	55	MOBILE		# IP Mobility
+tlsp	56	TLSP		# Transport Layer Security Protocol
+skip	57	SKIP		# SKIP
+ipv6-icmp	58	IPV6-ICMP	# ICMP for IPv6
+ipv6-nonxt	59	IPV6-NONXT	# no next header for ipv6
+ipv6-opts	60	IPV6-OPTS	# destination options for ipv6
+#	61			# any host internal protocol
+cftp	62	CFTP		# CFTP
+#	63			# any local network
+sat-expak	64	SAT-EXPAK	# SATNET and Backroom EXPAK
+kryptolan	65	KRYPTOLAN	# Kryptolan
+rvd	66	RVD		# MIT Remote Virtual Disk Protocol
+ippc	67	IPPC		# Internet Pluribus Packet Core
+#	68			# any distributed file system
+sat-mon	69	SAT-MON		# SATNET Monitoring
+visa	70	VISA		# VISA Protocol
+ipcv	71	IPCV		# Internet Packet Core Utility
+cpnx	72	CPNX		# Computer Protocol Network Executive
+cphb	73	CPHB		# Computer Protocol Heart Beat
+wsn	74	WSN		# Wang Span Network
+pvp	75	PVP		# Packet Video Protocol
+br-sat-mon	76	BR-SAT-MON	# Backroom SATNET Monitoring
+sun-nd	77	SUN-ND		# SUN ND PROTOCOL-Temporary
+wb-mon	78	WB-MON		# WIDEBAND Monitoring
+wb-expak	79	WB-EXPAK	# WIDEBAND EXPAK
+iso-ip	80	ISO-IP		# ISO Internet Protocol
+vmtp	81	VMTP		# Versatile Message Transport
+secure-vmtp	82	SECURE-VMTP	# SECURE-VMTP
+vines	83	VINES		# VINES
+ttp	84	TTP		# TTP
+nsfnet-igp	85	NSFNET-IGP	# NSFNET-IGP
+dgp	86	DGP		# Dissimilar Gateway Protocol
+tcf	87	TCF		# TCF
+eigrp	88	EIGRP		# Enhanced Interior Routing Protocol (Cisco)
+ospf	89	OSPFIGP		# Open Shortest Path First IGP
+sprite-rpc	90	Sprite-RPC	# Sprite RPC Protocol
+larp	91	LARP		# Locus Address Resolution Protocol
+mtp	92	MTP		# Multicast Transport Protocol
+ax.25	93	AX.25		# AX.25 Frames
+ipip	94	IPIP		# Yet Another IP encapsulation
+micp	95	MICP		# Mobile Internetworking Control Pro.
+scc-sp	96	SCC-SP		# Semaphore Communications Sec. Pro.
+etherip	97	ETHERIP		# Ethernet-within-IP Encapsulation
+encap	98	ENCAP		# Yet Another IP encapsulation
+#	99			# any private encryption scheme
+gmtp	100	GMTP		# GMTP
+ifmp	101	IFMP		# Ipsilon Flow Management Protocol
+pnni	102	PNNI		# PNNI over IP
+pim	103	PIM		# Protocol Independent Multicast
+aris	104	ARIS		# ARIS
+scps	105	SCPS		# SCPS
+qnx	106	QNX		# QNX
+a/n	107	A/N		# Active Networks
+ipcomp	108	IPComp		# IP Payload Compression Protocol
+snp	109	SNP		# Sitara Networks Protocol
+compaq-peer	110	Compaq-Peer	# Compaq Peer Protocol
+ipx-in-ip	111	IPX-in-IP	# IPX in IP
+vrrp	112	VRRP		# Virtual Router Redundancy Protocol
+pgm	113	PGM		# PGM Reliable Transport Protocol
+#	114			# any 0-hop protocol
+l2tp	115	L2TP		# Layer Two Tunneling Protocol
+ddx	116	DDX		# D-II Data Exchange
+iatp	117	IATP		# Interactive Agent Transfer Protocol
+st	118	ST		# Schedule Transfer
+srp	119	SRP		# SpectraLink Radio Protocol
+uti	120	UTI		# UTI
+smp	121	SMP		# Simple Message Protocol
+sm	122	SM		# SM
+ptp	123	PTP		# Performance Transparency Protocol
+isis	124	ISIS		# ISIS over IPv4
+fire	125	FIRE
+crtp	126	CRTP		# Combat Radio Transport Protocol
+crudp	127	CRUDP		# Combat Radio User Datagram
+sscopmce	128	SSCOPMCE
+iplt	129	IPLT
+sps	130	SPS		# Secure Packet Shield
+pipe	131	PIPE		# Private IP Encapsulation within IP
+sctp	132	SCTP		# Stream Control Transmission Protocol
+fc	133	FC		# Fibre Channel
+#	134-254			# Unassigned
+divert	254	DIVERT		# Divert pseudo-protocol [non IANA]
+#	255			# Reserved
diff --git a/source/n/network-scripts/scripts/rc.inet1 b/source/n/network-scripts/scripts/rc.inet1
new file mode 100644
index 00000000..0080f7da
--- /dev/null
+++ b/source/n/network-scripts/scripts/rc.inet1
@@ -0,0 +1,276 @@
+#! /bin/sh
+# /etc/rc.d/rc.inet1
+# This script is used to bring up the various network interfaces.
+#
+# @(#)/etc/rc.d/rc.inet1 10.2  Sun Jul 24 12:45:56 PDT 2005  (pjv)
+
+############################
+# READ NETWORK CONFIG FILE #
+############################
+
+# Get the configuration information from /etc/rc.d/rc.inet1.conf:
+. /etc/rc.d/rc.inet1.conf
+
+###########
+# LOGGING #
+###########
+
+# If possible, log events in /var/log/messages:
+if [ -f /var/run/syslogd.pid -a -x /usr/bin/logger ]; then
+  LOGGER=/usr/bin/logger
+else # output to stdout/stderr:
+  LOGGER=/bin/cat
+fi
+
+############################
+# DETERMINE INTERFACE LIST #
+############################
+
+# Compose a list of interfaces from /etc/rc.d/rc.inet1.conf (with a maximum
+# of 6 interfaces, but you can easily enlarge the interface limit
+# - send me a picture of such a box :-).
+# If a value for IFNAME[n] is not set, we assume it is an eth'n' interface.
+# This way, the new script is compatible with older rc.inet1.conf files.
+# The IFNAME array will be used to determine which interfaces to bring up/down.
+MAXNICS=${MAXNICS:-6}
+i=0
+while [ $i -lt $MAXNICS ];
+do
+  IFNAME[$i]=${IFNAME[$i]:=eth${i}}
+  i=$(($i+1))
+done
+if [ "$DEBUG_ETH_UP" = "yes" ]; then
+  echo "/etc/rc.d/rc.inet1:  List of interfaces: '${IFNAME[@]}'" | $LOGGER
+fi
+
+######################
+# LOOPBACK FUNCTIONS #
+######################
+
+# Function to bring up the loopback interface.  If loopback is
+# already up, do nothing.
+lo_up() {
+  if grep lo: /proc/net/dev 1> /dev/null ; then
+    if ! /sbin/ifconfig | grep "^lo" 1> /dev/null ; then
+      echo "/etc/rc.d/rc.inet1:  /sbin/ifconfig lo 127.0.0.1" | $LOGGER
+      /sbin/ifconfig lo 127.0.0.1
+      echo "/etc/rc.d/rc.inet1:  /sbin/route add -net 127.0.0.0 netmask 255.0.0.0 lo" | $LOGGER
+      /sbin/route add -net 127.0.0.0 netmask 255.0.0.0 lo
+    fi
+  fi
+}
+
+# Function to take down the loopback interface:
+lo_down() {
+  if grep lo: /proc/net/dev 1> /dev/null ; then
+    echo "/etc/rc.d/rc.inet1:  /sbin/ifconfig lo down" | $LOGGER
+    /sbin/ifconfig lo down
+  fi
+}
+
+#######################
+# INTERFACE FUNCTIONS #
+#######################
+
+# Function to bring up a network interface.  If the interface is
+# already up or does not yet exist (perhaps because the kernel driver
+# is not loaded yet), do nothing.
+if_up() {
+  # Determine position 'i' of this interface in the IFNAME array:
+  i=0
+  while [ $i -lt $MAXNICS ]; do
+    [ "${IFNAME[$i]}" = "${1}" ] && break
+    i=$(($i+1))
+  done
+  # If the interface isn't in the kernel yet (but there's an alias for it in
+  # modules.conf), then it should be loaded first:
+  if ! grep `echo ${1}: | cut -f 1 -d :`: /proc/net/dev 1> /dev/null ; then # no interface yet
+    if /sbin/modprobe -c | grep -v "^#" | grep -w "alias ${1}" | grep -vw "alias ${1} off" > /dev/null ; then
+      echo "/etc/rc.d/rc.inet1:  /sbin/modprobe ${1}" | $LOGGER
+      /sbin/modprobe ${1}
+    fi
+  fi
+  if grep `echo ${1}: | cut -f 1 -d :`: /proc/net/dev 1> /dev/null ; then # interface exists
+    if ! /sbin/ifconfig | grep -w "${1}" 1>/dev/null || \
+      ! /sbin/ifconfig ${1} | grep "inet addr" 1> /dev/null ; then # interface not up or not configured
+      if [ ! "${HWADDR[$i]}" = "" ]; then # Set hardware address _before_ the interface goes up:
+        echo "/etc/rc.d/rc.inet1:  /sbin/ifconfig ${1} hw ether ${HWADDR[$i]}" | $LOGGER
+        /sbin/ifconfig ${1} hw ether ${HWADDR[$i]}
+      fi
+      if [ ! "${MTU[$i]}" = "" ]; then # Set MTU to something else than 1500
+        echo "/etc/rc.d/rc.inet1:  /sbin/ifconfig ${1} mtu ${MTU[$i]}" | $LOGGER
+        /sbin/ifconfig ${1} mtu ${MTU[$i]}
+      fi
+      if [ -x /etc/rc.d/rc.wireless ]; then
+        . /etc/rc.d/rc.wireless ${1} start # Initialize any wireless parameters
+      fi
+      if [ "${USE_DHCP[$i]}" = "yes" ]; then # use DHCP to bring interface up
+        [ ${DHCP_HOSTNAME[$i]} ] && DHCP_OPTIONS="-h ${DHCP_HOSTNAME[$i]}"
+        [ "${DHCP_KEEPRESOLV[$i]}" = "yes" ] && DHCP_OPTIONS="$DHCP_OPTIONS -R"
+        [ "${DHCP_KEEPNTP[$i]}" = "yes" ] && DHCP_OPTIONS="$DHCP_OPTIONS -N"
+        [ "${DHCP_KEEPGW[$i]}" = "yes" ] && DHCP_OPTIONS="$DHCP_OPTIONS -G"
+        [ "${DHCP_DEBUG[$i]}" = "yes" ] && DHCP_OPTIONS="$DHCP_OPTIONS -d"
+        [ "${DHCP_NOIPV4LL[$i]}" = "yes" ] && DHCP_OPTIONS="$DHCP_OPTIONS -L"
+        [ ${DHCP_IPADDR[$i]} ] && DHCP_OPTIONS="$DHCP_OPTIONS -s ${DHCP_IPADDR[$i]}"
+        echo "Polling for DHCP server on interface ${1}:"
+        # If you set a timeout, you get one, even if the kernel doesn't think that
+        # your device is connected, in case /sys isn't right (which it usually isn't
+        # except right after the device is loaded, when it usually is):
+        #### (start commented out)
+        # This is deactivated for now since the kernel has been returning incorrect
+        # results concerning whether the interface carrier is detected.
+        #if [ "${DHCP_TIMEOUT[$i]}" = "" ]; then
+        #  ifconfig ${1} up && sleep 1
+        #  CONNSTATUS="$(cat /sys/class/net/${1}/carrier 2> /dev/null)"
+        #  ifconfig ${1} down
+        #  if [ "$CONNSTATUS" = "0" ]; then
+        #    # The kernel has just told us the cable isn't even plugged in, but we will
+        #    # give any DHCP server a short chance to reply anyway:
+        #    echo "No carrier detected on ${1}.  Reducing DHCP timeout to 10 seconds."
+        #    DHCP_TIMEOUT[$i]=10
+        #  fi
+        #fi
+        #### (end commented out)
+        # 10 seconds should be a reasonable default DHCP timeout.  30 was too much.
+        echo "/etc/rc.d/rc.inet1:  /sbin/dhcpcd -t ${DHCP_TIMEOUT[$i]:-10} ${DHCP_OPTIONS} ${1}" | $LOGGER
+        /sbin/dhcpcd -t ${DHCP_TIMEOUT[$i]:-10} ${DHCP_OPTIONS} ${1}
+      else # bring up interface using a static IP address
+        if [ ! "${IPADDR[$i]}" = "" ]; then # skip unconfigured interfaces
+          # Determine broadcast address from the IP address and netmask:
+          BROADCAST[$i]=`/bin/ipmask ${NETMASK[$i]} ${IPADDR[$i]}|cut -f1 -d' '`
+          # Set up the network card:
+          echo "/etc/rc.d/rc.inet1:  /sbin/ifconfig ${1} ${IPADDR[$i]} broadcast ${BROADCAST[$i]} netmask ${NETMASK[$i]}" | $LOGGER
+          /sbin/ifconfig ${1} ${IPADDR[$i]} broadcast ${BROADCAST[$i]} netmask ${NETMASK[$i]}
+        else
+          if [ "$DEBUG_ETH_UP" = "yes" ]; then
+            echo "/etc/rc.d/rc.inet1:  ${1} interface is not configured in /etc/rc.d/rc.inet1.conf" | $LOGGER
+          fi
+        fi
+      fi
+    else
+      if [ "$DEBUG_ETH_UP" = "yes" ]; then
+        echo "/etc/rc.d/rc.inet1:  ${1} is already up, skipping" | $LOGGER
+      fi
+    fi 
+  else
+    if [ "$DEBUG_ETH_UP" = "yes" ]; then
+      echo "/etc/rc.d/rc.inet1:  ${1} interface does not exist (yet)" | $LOGGER
+    fi
+  fi
+}
+
+# Function to take down a network interface:
+if_down() {
+  # Determine position 'i' of this interface in the IFNAME array:
+  i=0
+  while [ $i -lt $MAXNICS ]; do
+    [ "${IFNAME[$i]}" = "${1}" ] && break
+    i=$(($i+1))
+  done
+  if grep `echo ${1}: | cut -f 1 -d :`: /proc/net/dev 1> /dev/null ; then
+    if [ "${USE_DHCP[$i]}" = "yes" ]; then
+      echo "/etc/rc.d/rc.inet1:  /sbin/dhcpcd -k -d ${1}" | $LOGGER
+      /sbin/dhcpcd -k -d ${1} 2> /dev/null || /sbin/ifconfig ${1} down
+      sleep 1
+    else
+      echo "/etc/rc.d/rc.inet1:  /sbin/ifconfig ${1} down" | $LOGGER
+      /sbin/ifconfig ${1} down
+    fi
+    if [ -x /etc/rc.d/rc.wireless ]; then
+      . /etc/rc.d/rc.wireless ${1} stop # Kill wireless daemons if any.
+    fi
+  fi
+}
+
+#####################
+# GATEWAY FUNCTIONS #
+#####################
+
+# Function to bring up the gateway if there is not yet a default route:
+gateway_up() {
+  if ! /sbin/route -n | grep "^0.0.0.0" 1> /dev/null ; then
+    if [ ! "$GATEWAY" = "" ]; then
+      echo "/etc/rc.d/rc.inet1:  /sbin/route add default gw ${GATEWAY} metric 1" | $LOGGER
+      /sbin/route add default gw ${GATEWAY} metric 1 2>&1 | $LOGGER
+    fi
+  fi
+}
+
+# Function to take down an existing default gateway:
+gateway_down() {
+  if /sbin/route -n | grep "^0.0.0.0" 1> /dev/null ; then
+    echo "/etc/rc.d/rc.inet1:  /sbin/route del default" | $LOGGER
+    /sbin/route del default
+  fi
+}
+
+# Function to start the network:
+start() {
+  lo_up
+  for i in ${IFNAME[@]} ; do
+    if_up $i
+  done
+  gateway_up
+}
+
+# Function to stop the network:
+stop() {
+  gateway_down
+  for i in ${IFNAME[@]} ; do
+    if_down $i
+  done
+  lo_down
+}
+
+
+############
+### MAIN ###
+############
+
+case "$1" in
+'start') # "start" brings up all configured interfaces:
+  start
+  ;;
+'stop') # "stop" takes down all configured interfaces:
+  stop
+  ;;
+'restart') # "restart" restarts the network:
+  stop
+  start
+  ;;
+*_start) # Example: "eth1_start" will start the specified interface 'eth1'
+  INTERFACE=`echo $1 | /bin/cut -d '_' -f 1`
+  if_up $INTERFACE
+  gateway_up
+  ;;
+*_stop) # Example: "eth0_stop" will stop the specified interface 'eth0'
+  INTERFACE=`echo $1 | /bin/cut -d '_' -f 1`
+  if_down $INTERFACE
+  ;;
+*_restart) # Example: "wlan0_restart" will take 'wlan0' down and up again
+  INTERFACE=`echo $1 | /bin/cut -d '_' -f 1`
+  if_down $INTERFACE
+  sleep 1
+  if_up $INTERFACE
+  gateway_up
+  ;;
+'up') # "up" does the same thing as "start"
+  start
+  ;;
+'down') # "down" does the same thing as "stop"
+  stop
+  ;;
+*_up) # "*_up" does the same thing as "*_start"
+  INTERFACE=`echo $1 | /bin/cut -d '_' -f 1`
+  if_up $INTERFACE
+  gateway_up
+  ;;
+*_down) # "*_down" does the same thing as "*_stop"
+  INTERFACE=`echo $1 | /bin/cut -d '_' -f 1`
+  if_down $INTERFACE
+  ;;
+*) # The default is to bring up all configured interfaces:
+  start
+esac
+
+# End of /etc/rc.d/rc.inet1
diff --git a/source/n/network-scripts/scripts/rc.inet1.conf b/source/n/network-scripts/scripts/rc.inet1.conf
new file mode 100644
index 00000000..555210c4
--- /dev/null
+++ b/source/n/network-scripts/scripts/rc.inet1.conf
@@ -0,0 +1,107 @@
+# /etc/rc.d/rc.inet1.conf
+#
+# This file contains the configuration settings for network interfaces.
+# If USE_DHCP[interface] is set to "yes", this overrides any other settings.
+# If you don't have an interface, leave the settings null ("").
+
+# You can configure network interfaces other than eth0,eth1... by setting
+# IFNAME[interface] to the interface's name. If IFNAME[interface] is unset
+# or empty, it is assumed you're configuring eth<interface>.
+
+# Several other parameters are available, the end of this file contains a
+# comprehensive set of examples.
+
+# =============================================================================
+
+# Config information for eth0:
+IPADDR[0]=""
+NETMASK[0]=""
+USE_DHCP[0]=""
+DHCP_HOSTNAME[0]=""
+
+# Config information for eth1:
+IPADDR[1]=""
+NETMASK[1]=""
+USE_DHCP[1]=""
+DHCP_HOSTNAME[1]=""
+
+# Config information for eth2:
+IPADDR[2]=""
+NETMASK[2]=""
+USE_DHCP[2]=""
+DHCP_HOSTNAME[2]=""
+
+# Config information for eth3:
+IPADDR[3]=""
+NETMASK[3]=""
+USE_DHCP[3]=""
+DHCP_HOSTNAME[3]=""
+
+# Default gateway IP address:
+GATEWAY=""
+
+# Change this to "yes" for debugging output to stdout.  Unfortunately,
+# /sbin/hotplug seems to disable stdout so you'll only see debugging output
+# when rc.inet1 is called directly.
+DEBUG_ETH_UP="no"
+
+## Example config information for wlan0.  Uncomment the lines you need and fill
+## in your data.  (You may not need all of these for your wireless network)
+#IFNAME[4]="wlan0"
+#IPADDR[4]=""
+#NETMASK[4]=""
+#USE_DHCP[4]="yes"
+#DHCP_HOSTNAME[4]="icculus-wireless"
+#DHCP_KEEPRESOLV[4]="yes"
+#DHCP_KEEPNTP[4]="yes"
+#DHCP_KEEPGW[4]="yes"
+#DHCP_IPADDR[4]=""
+#WLAN_ESSID[4]=DARKSTAR
+#WLAN_MODE[4]=Managed
+#WLAN_RATE[4]="54M auto"
+#WLAN_CHANNEL[4]="auto"
+#WLAN_KEY[4]="D5A31F54ACF0487C2D0B1C10D2"
+#WLAN_IWPRIV[4]="set AuthMode=WPAPSK | set EncrypType=TKIP | set WPAPSK=96389dc66eaf7e6efd5b5523ae43c7925ff4df2f8b7099495192d44a774fda16"
+#WLAN_WPA[4]="wpa_supplicant"
+#WLAN_WPADRIVER[4]="wext"
+#WLAN_WPAWAIT[4]=30
+
+## Some examples of additional network parameters that you can use.
+## Config information for wlan0:
+#IFNAME[4]="wlan0"              # Use a different interface name instead of
+                                # the default 'eth4'
+#IFNAME[4]="eth0:1"             # Set up an IP alias.
+#HWADDR[4]="00:01:23:45:67:89"  # Overrule the card's hardware MAC address
+#MTU[4]=""                      # The default MTU is 1500, but you might need
+                                # 1360 when you use NAT'ed IPSec traffic.
+#DHCP_TIMEOUT[4]=15             # The default timeout for the DHCP client to
+                                # wait for server resonse is 10 seconds, but
+                                # you might want a shorter or longer wait.
+#DHCP_KEEPRESOLV[4]="yes"       # If you dont want /etc/resolv.conf overwritten
+#DHCP_KEEPNTP[4]="yes"          # If you don't want ntp.conf overwritten
+#DHCP_KEEPGW[4]="yes"           # If you don't want the DHCP server to change
+                                # your default gateway
+#DHCP_IPADDR[4]=""              # Request a specific IP address from the DHCP
+                                # server
+#DHCP_DEBUG[4]="yes"            # Make dhcpcd show verbose diagnostics
+#DHCP_NOIPV4LL[4]="yes"         # Do not assign an ipv4ll address when a DHCP
+                                # server is not found (ipv4ll link-local
+                                # adresses in the IP range 169.254.0.0/16 are
+                                # also known as "zeroconf" addresses)
+#WLAN_ESSID[4]=DARKSTAR         # An example of how you can override _any_
+                                # parameter defined in rc.wireless.conf, by
+                                # prepending 'WLAN_' to the parameter's name.
+                                # Useful with multiple wireless interfaces.
+#WLAN_IWPRIV[4]="set AuthMode=WPAPSK | set EncrypType=TKIP | set WPAPSK=thekey"
+                                # Some drivers require a private ioctl to be
+                                # set through the iwpriv command. If more than
+                                # one is required, you can place them in the
+                                # IWPRIV parameter (separated with the pipe (|)
+                                # character, see the example).
+#WLAN_WPA[4]="wpa_supplicant"   # Run wpa_supplicant for WPA support
+#WLAN_WPADRIVER[4]="ndiswrapper"# Tell wpa_supplicant to specifically use the
+                                # ndiswrapper driver (if you leave this empty
+                                # the 'wext' driver is used by default)
+#WLAN_WPAWAIT[4]=30             # In case it takes long for the WPA association
+                                # to finish, you can increase the wait time
+                                # (defaults to 10 seconds)
diff --git a/source/n/network-scripts/scripts/rc.inet2 b/source/n/network-scripts/scripts/rc.inet2
new file mode 100644
index 00000000..232d93ec
--- /dev/null
+++ b/source/n/network-scripts/scripts/rc.inet2
@@ -0,0 +1,137 @@
+#!/bin/sh
+#
+# rc.inet2	This shell script boots up the entire network system.
+#		Note, that when this script is used to also fire
+#		up any important remote NFS disks (like the /usr
+#		directory), care must be taken to actually
+#		have all the needed binaries online _now_ ...
+#
+#               Uncomment or comment out sections depending on which
+#               services your site requires.
+#
+# Author:	Fred N. van Kempen, <waltje@uwalt.nl.mugnet.org>
+# Modified for Slackware by Patrick Volkerding <volkerdi@slackware.com>
+
+
+# At this point, we are ready to talk to The World...
+
+
+# Mount remote (NFS) filesystems:
+if cat /etc/fstab | grep -v '^#' | grep -w nfs 1> /dev/null 2> /dev/null ; then
+  # Start rpc.portmap, /sbin/rpc.lockd, and /sbin/rpc.statd if we find NFS
+  # volumes defined in /etc/fstab since these will need to be running in order
+  # to mount them.  If they are not running, attempting to mount an NFS
+  # partition will cause mount to hang, or at least result in unreliable
+  # operation.  Keep this in mind if you plan to mount unlisted NFS
+  # partitions... 
+  # If you have uncommented NFS partitions in your /etc/fstab, rc.rpc is run
+  # whether it is set as executable or not.  If you don't want to run it,
+  # comment the NFS partitions out in /etc/fstab or erase/rename rc.rpc.
+  if [ -r /etc/rc.d/rc.rpc ]; then
+    sh /etc/rc.d/rc.rpc start
+  fi
+  echo "Mounting remote (NFS) file systems:  /sbin/mount -a -t nfs"
+  /sbin/mount -a -t nfs          # This may be our /usr runtime!
+  # Show the mounted volumes:
+  /sbin/mount -v -t nfs
+fi
+
+# If /etc/rc.d/rc.rpc is executable, run it to load rpc.portmap, rpc.lockd,
+# and rpc.statd.  This might be needed to mount NFS partitions that are not
+# listed in /etc/fstab.  Starting this twice won't hurt as the script will
+# check if things are already running before trying to start them.
+if [ -x /etc/rc.d/rc.rpc ]; then
+  sh /etc/rc.d/rc.rpc start
+fi
+
+# Mount remote CIFS filesystems.  Note that where possible, using CIFS is
+# preferred over SMBFS.  SMBFS is no longer actively maintained.
+if cat /etc/fstab | grep -v '^#' | grep -w cifs 1> /dev/null 2> /dev/null ; then
+  echo "Mounting remote CIFS file systems:  /sbin/mount -a -t cifs"
+  /sbin/mount -a -t cifs
+  # Show the mounted volumes:
+  /sbin/mount -v -t cifs
+fi
+
+# Mount remote SMB filesystems:
+if cat /etc/fstab | grep -v '^#' | grep -w smbfs 1> /dev/null 2> /dev/null ; then
+  echo "Mounting remote SMBFS file systems:  /sbin/mount -a -t smbfs"
+  /sbin/mount -a -t smbfs
+  # Show the mounted volumes:
+  /sbin/mount -v -t smbfs
+fi
+
+# Start the system logger if it is not already running (maybe because /usr
+# is on a network partition).
+if [ -x /etc/rc.d/rc.syslog -a -d /var/log -a ! -r /var/run/syslogd.pid ]; then
+  . /etc/rc.d/rc.syslog start
+fi
+
+# If there is a firewall script, run it before enabling packet forwarding.
+# See the HOWTOs on http://www.netfilter.org/ for documentation on
+# setting up a firewall or NAT on Linux.  In some cases this might need to
+# be moved past the section below dealing with IP packet forwarding.
+if [ -x /etc/rc.d/rc.firewall ]; then
+  /etc/rc.d/rc.firewall start
+fi
+
+# Turn on IPv4 packet forwarding support.
+if [ -x /etc/rc.d/rc.ip_forward ]; then
+  . /etc/rc.d/rc.ip_forward start
+fi
+
+# Start the inetd server:
+if [ -x /etc/rc.d/rc.inetd ]; then
+  /etc/rc.d/rc.inetd start
+fi
+
+# Start the OpenSSH SSH daemon:
+if [ -x /etc/rc.d/rc.sshd ]; then
+  echo "Starting OpenSSH SSH daemon:  /usr/sbin/sshd"
+  /etc/rc.d/rc.sshd start
+fi
+
+# Start the BIND name server daemon:
+if [ -x /etc/rc.d/rc.bind ]; then
+  /etc/rc.d/rc.bind start
+fi
+
+# Start NIS (the Network Information Service):
+if [ -x /etc/rc.d/rc.yp ]; then
+  . /etc/rc.d/rc.yp start
+fi
+
+# Start the NFS server.  Note that for this to work correctly, you'll
+# need nfsd support in the kernel (the startup script will try to load
+# the module for you).
+# You'll also need to set up some shares in /etc/exports.
+# Starting the NFS server:
+if [ -x /etc/rc.d/rc.nfsd ]; then
+  /etc/rc.d/rc.nfsd start
+fi
+
+# Stuff you won't need follows.  ;-)
+
+# # Start the network routing daemon:
+# if [ -x /usr/sbin/routed ]; then
+#   echo "Starting network routing daemon:  /usr/sbin/routed"
+#   /usr/sbin/routed -g -s
+# fi
+
+# # Start the system status server:
+# if [ -x /usr/sbin/rwhod ]; then
+#   echo "Starting system status server:  /usr/sbin/rwhod"
+#   /usr/sbin/rwhod
+# fi
+
+#  # Fire up the PC-NFS daemon(s).  This is a primarily obsolete system, and may
+#  # not be very secure.  It's not at all needed for normal NFS server support.
+#  # You probably should not run this.
+#  if [ -x /usr/sbin/rpc.pcnfsd ]; then
+#    echo "Starting PC-NFS daemons:  /usr/sbin/rpc.pcnfsd /usr/sbin/rpc.bwnfsd"
+#    /usr/sbin/rpc.pcnfsd /var/spool/lpd
+#  fi
+#  if [ -x /usr/sbin/rpc.bwnfsd ]; then
+#    /usr/sbin/rpc.bwnfsd /var/spool/lpd
+#  fi
+
diff --git a/source/n/network-scripts/scripts/rc.ip_forward b/source/n/network-scripts/scripts/rc.ip_forward
new file mode 100644
index 00000000..8940dc2c
--- /dev/null
+++ b/source/n/network-scripts/scripts/rc.ip_forward
@@ -0,0 +1,78 @@
+#!/bin/sh
+# /etc/rc.d/rc.ip_forward:  start/stop IP packet forwarding
+#
+# If you intend to run your Linux box as a router, i.e. as a
+# computer that forwards and redistributes network packets, you
+# will need to enable IP packet forwarding in your kernel.
+#
+# To activate IP packet forwarding at boot time, make this
+# script executable:  chmod 755 /etc/rc.d/rc.ip_forward
+#
+# To disable IP packet forwarding at boot time, make this
+# script non-executable:  chmod 644 /etc/rc.d/rc.ip_forward
+
+# Start IP packet forwarding:
+ip_forward_start() {
+  if [ -f /proc/sys/net/ipv4/ip_forward ]; then
+    echo "Activating IPv4 packet forwarding."
+    echo 1 > /proc/sys/net/ipv4/ip_forward
+    # Changing /proc/sys/net/ipv4/ip_forward results in resetting all
+    # non-default ipv4 parameters for the interface as mentioned in
+    # /usr/src/linux/Documentation/networking/ip-sysctl.txt.  So, we
+    # will reapply any ipv4 sysctl parameters now:
+    if [ -r /etc/sysctl.conf ]; then
+      /bin/grep ipv4 /etc/sysctl.conf | sysctl -p - 1> /dev/null 2> /dev/null
+    fi
+  fi
+  # When using IPv4 packet forwarding, you will also get the
+  # rp_filter, which automatically rejects incoming packets if the
+  # routing table entry for their source address doesn't match the
+  # network interface they're arriving on.  This has security
+  # advantages because it prevents the so-called IP spoofing,
+  # however it can pose problems if you use asymmetric routing
+  # (packets from you to a host take a different path than packets
+  # from that host to you) or if you operate a non-routing host
+  # which has several IP addresses on different interfaces.  To
+  # turn rp_filter off, uncomment the lines below:
+  #if [ -r /proc/sys/net/ipv4/conf/all/rp_filter ]; then
+  #  echo "Disabling rp_filter."
+  #  echo 0 > /proc/sys/net/ipv4/conf/all/rp_filter
+  #fi
+}
+
+# Stop IP packet forwarding:
+ip_forward_stop() {
+  if [ -f /proc/sys/net/ipv4/ip_forward ]; then
+    echo "Disabling IPv4 packet forwarding."
+    echo 0 > /proc/sys/net/ipv4/ip_forward
+    # Changing /proc/sys/net/ipv4/ip_forward results in resetting all
+    # non-default ipv4 parameters for the interface as mentioned in
+    # /usr/src/linux/Documentation/networking/ip-sysctl.txt.  So, we
+    # will reapply any ipv4 sysctl parameters now:
+    if [ -r /etc/sysctl.conf ]; then
+      /bin/grep ipv4 /etc/sysctl.conf | sysctl -p - 1> /dev/null 2> /dev/null
+    fi
+  fi
+}
+
+# Restart IP packet forwarding:
+ip_forward_restart() {
+  ip_forward_stop
+  sleep 1
+  ip_forward_start
+}
+
+case "$1" in
+'start')
+  ip_forward_start
+  ;;
+'stop')
+  ip_forward_stop
+  ;;
+'restart')
+  ip_forward_restart
+  ;;
+*)
+  echo "usage $0 start|stop|restart"
+esac
+
diff --git a/source/n/network-scripts/scripts/resolv.conf b/source/n/network-scripts/scripts/resolv.conf
new file mode 100644
index 00000000..96726f01
--- /dev/null
+++ b/source/n/network-scripts/scripts/resolv.conf
@@ -0,0 +1 @@
+search example.net
diff --git a/source/n/network-scripts/scripts/setup.netconfig b/source/n/network-scripts/scripts/setup.netconfig
new file mode 100644
index 00000000..7165a4a9
--- /dev/null
+++ b/source/n/network-scripts/scripts/setup.netconfig
@@ -0,0 +1,13 @@
+#!/bin/sh
+#BLURB="Configure basic network settings"
+TMP=/var/log/setup/tmp
+dialog --title "CONFIGURE NETWORK?" --yesno "Would you like to \
+configure your network?" 5 60
+if [ $? = 0 ]; then
+  while [ 0 ]; do # we're gonna do this until we get it right :-)
+    sh sbin/netconfig $*
+    if [ "$?" = "0" ]; then # success
+      break;
+    fi
+  done
+fi