Slackware 13.0slackware-13.0

Wed Aug 26 10:00:38 CDT 2009
Slackware 13.0 x86_64 is released as stable!  Thanks to everyone who
helped make this release possible -- see the RELEASE_NOTES for the
credits.  The ISOs are off to the replicator.  This time it will be a
6 CD-ROM 32-bit set and a dual-sided 32-bit/64-bit x86/x86_64 DVD.
We're taking pre-orders now at store.slackware.com.  Please consider
picking up a copy to help support the project.  Once again, thanks to
the entire Slackware community for all the help testing and fixing
things and offering suggestions during this development cycle.
As always, have fun and enjoy!  -P.

4 files changed, 252 insertions, 0 deletions

diff --git a/source/n/openssh/doinst.sh b/source/n/openssh/doinst.sh
new file mode 100644
index 00000000..d696245d
--- /dev/null
+++ b/source/n/openssh/doinst.sh
@@ -0,0 +1,35 @@
+config() {
+  NEW="$1"
+  OLD="`dirname $NEW`/`basename $NEW .new`"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r $OLD ]; then
+    mv $NEW $OLD
+  elif [ "`cat $OLD | md5sum`" = "`cat $NEW | md5sum`" ]; then # toss the redundant copy
+    rm $NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+config etc/ssh/ssh_config.new
+config etc/ssh/sshd_config.new
+config etc/rc.d/rc.sshd.new
+
+# If the sshd user/group/shadow don't exist, add them:
+
+if ! grep -q "^sshd:" etc/passwd ; then
+  echo "sshd:x:33:33:sshd:/:" >> etc/passwd
+fi
+
+if ! grep -q "^sshd:" etc/group ; then
+  echo "sshd::33:sshd" >> etc/group
+fi
+
+if ! grep -q "^sshd:" etc/shadow ; then
+  echo "sshd:*:9797:0:::::" >> etc/shadow
+fi
+
+# Add a btmp file to store login failure if one doesn't exist:
+if [ ! -r var/log/btmp ]; then
+  ( cd var/log ; umask 077 ; touch btmp )
+fi
+
diff --git a/source/n/openssh/openssh.SlackBuild b/source/n/openssh/openssh.SlackBuild
new file mode 100755
index 00000000..4a661132
--- /dev/null
+++ b/source/n/openssh/openssh.SlackBuild
@@ -0,0 +1,145 @@
+#!/bin/sh
+
+# Copyright 2000 BSDi, Inc. Concord, CA, USA
+# Copyright 2001, 2002, 2003, 2004  Slackware Linux, Inc. Concord, CA, USA
+# Copyright 2006, 2007, 2008, 2009  Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+# Set initial variables:
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-openssh
+
+VERSION=${VERSION:-5.2p1}
+ARCH=${ARCH:-x86_64}
+BUILD=${BUILD:-2}
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+elif [ "$ARCH" = "arm" ]; then
+  SLKCFLAGS="-O2 -march=armv4 -mtune=xscale"
+elif [ "$ARCH" = "armel" ]; then
+  SLKCFLAGS="-O2 -march=armv4t"
+fi
+
+# Clean target location:
+rm -rf $PKG
+mkdir -p $PKG
+
+# Prepare the framework and extract the package:
+cd $TMP
+rm -rf $PKG openssh-$VERSION
+tar xjvf $CWD/openssh-$VERSION.tar.bz2 || exit 1
+cd openssh-$VERSION
+chown -R root:root .
+
+# Compile package:
+CFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --mandir=/usr/man \
+  --sysconfdir=/etc/ssh \
+  --without-pam \
+  --with-md5-passwords \
+  --with-tcp-wrappers \
+  --with-default-path=/usr/local/sbin:/usr/sbin:/sbin:/usr/local/bin:/usr/bin:/bin \
+  --with-ipv4-default \
+  --with-privsep-path=/var/empty \
+  --with-privsep-user=sshd \
+  --build=$ARCH-slackware-linux
+
+make -j4 || exit 1
+
+# Install the package:
+make install DESTDIR=$PKG
+
+( cd $PKG
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+)
+
+# Compress and if needed symlink the man pages:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+# Install directory used with PrivilegeSeparation option:
+mkdir -p $PKG/var/empty
+chmod 755 $PKG/var/empty
+
+# Install docs:
+mkdir -p $PKG/usr/doc/openssh-$VERSION
+cp -a \
+  CREDITS ChangeLog INSTALL LICENCE OVERVIEW \
+  README README.privsep README.smartcard RFC.nroff TODO WARNING.RNG \
+  $PKG/usr/doc/openssh-$VERSION
+chmod 644 $PKG/usr/doc/openssh-$VERSION/*
+
+# Install also 'ssh-copy-id' and its manpage from contrib:
+( cd contrib
+  cp -a ssh-copy-id $PKG/usr/bin/ssh-copy-id
+  chmod 755 $PKG/usr/bin/ssh-copy-id
+  cat ssh-copy-id.1 | gzip -9c > $PKG/usr/man/man1/ssh-copy-id.1.gz
+)
+
+( cd $PKG
+
+  # Ditch the new host keys, since these have to be uniquely prepared on each machine:
+  rm -f etc/ssh/ssh_host_dsa_key
+  rm -f etc/ssh/ssh_host_dsa_key.pub
+  rm -f etc/ssh/ssh_host_rsa_key
+  rm -f etc/ssh/ssh_host_rsa_key.pub
+  rm -f etc/ssh/ssh_host_key
+  rm -f etc/ssh/ssh_host_key.pub
+
+  # Set up the config script installation:
+  mv etc/ssh/ssh_config etc/ssh/ssh_config.new
+  mv etc/ssh/sshd_config etc/ssh/sshd_config.new
+
+  # Add the init script:
+  mkdir -p etc/rc.d
+  cat $CWD/rc.sshd > etc/rc.d/rc.sshd.new
+  chmod 755 etc/rc.d/rc.sshd.new
+
+  # Copy runtime installation files:
+  mkdir -p install
+  zcat $CWD/doinst.sh.gz > install/doinst.sh
+  cat $CWD/slack-desc > install/slack-desc
+)
+
+# Create the package itself:
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/openssh-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/source/n/openssh/rc.sshd b/source/n/openssh/rc.sshd
new file mode 100644
index 00000000..8b496568
--- /dev/null
+++ b/source/n/openssh/rc.sshd
@@ -0,0 +1,53 @@
+#!/bin/sh
+# Start/stop/restart the secure shell server:
+
+sshd_start() {
+  # Create host keys if needed.
+  if [ ! -r /etc/ssh/ssh_host_key ]; then
+    /usr/bin/ssh-keygen -t rsa1 -f /etc/ssh/ssh_host_key -N '' 
+  fi
+  if [ ! -f /etc/ssh/ssh_host_dsa_key ]; then
+    /usr/bin/ssh-keygen -t dsa -f /etc/ssh/ssh_host_dsa_key -N ''
+  fi
+  if [ ! -f /etc/ssh/ssh_host_rsa_key ]; then
+    /usr/bin/ssh-keygen -t rsa -f /etc/ssh/ssh_host_rsa_key -N ''
+  fi
+  /usr/sbin/sshd
+}
+
+sshd_stop() {
+  killall sshd
+}
+
+sshd_restart() {
+  if [ -r /var/run/sshd.pid ]; then
+    echo "WARNING: killing listener process only.  To kill every sshd process, you must"
+    echo "         use 'rc.sshd stop'.  'rc.sshd restart' kills only the parent sshd to"
+    echo "         allow an admin logged in through sshd to use 'rc.sshd restart' without"
+    echo "         being cut off.  If sshd has been upgraded, new connections will now"
+    echo "         use the new version, which should be a safe enough approach."
+    kill `cat /var/run/sshd.pid`
+  else
+    echo "WARNING: There does not appear to be a parent instance of sshd running."
+    echo "         If you really want to kill all running instances of sshd (including"
+    echo "         any sessions currently in use), run '/etc/rc.d/rc.sshd stop' instead."
+    exit 1
+  fi
+  sleep 1
+  sshd_start
+}
+
+case "$1" in
+'start')
+  sshd_start
+  ;;
+'stop')
+  sshd_stop
+  ;;
+'restart')
+  sshd_restart
+  ;;
+*)
+  echo "usage $0 start|stop|restart"
+esac
+
diff --git a/source/n/openssh/slack-desc b/source/n/openssh/slack-desc
new file mode 100644
index 00000000..04277a72
--- /dev/null
+++ b/source/n/openssh/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+       |-----handy-ruler------------------------------------------------------|
+openssh: openssh (Secure Shell daemon and clients)
+openssh:
+openssh: ssh (Secure Shell) is a program for logging into a remote machine and
+openssh: for executing commands on a remote machine.  It is intended to replace
+openssh: rlogin and rsh, and provide secure encrypted communications between
+openssh: two untrusted hosts over an insecure network.  sshd (SSH Daemon) is
+openssh: the daemon program for ssh.  OpenSSH is based on the last free version
+openssh: of Tatu Ylonen's SSH, further enhanced and cleaned up by Aaron
+openssh: Campbell, Bob Beck, Markus Friedl, Niels Provos, Theo de Raadt, and
+openssh: Dug Song.  It has a homepage at http://www.openssh.com/
+openssh: