Slackware 13.0slackware-13.0

Wed Aug 26 10:00:38 CDT 2009
Slackware 13.0 x86_64 is released as stable!  Thanks to everyone who
helped make this release possible -- see the RELEASE_NOTES for the
credits.  The ISOs are off to the replicator.  This time it will be a
6 CD-ROM 32-bit set and a dual-sided 32-bit/64-bit x86/x86_64 DVD.
We're taking pre-orders now at store.slackware.com.  Please consider
picking up a copy to help support the project.  Once again, thanks to
the entire Slackware community for all the help testing and fixing
things and offering suggestions during this development cycle.
As always, have fun and enjoy!  -P.

5 files changed, 250 insertions, 0 deletions

diff --git a/source/n/proftpd/doinst.sh b/source/n/proftpd/doinst.sh
new file mode 100644
index 00000000..37fe02dd
--- /dev/null
+++ b/source/n/proftpd/doinst.sh
@@ -0,0 +1,18 @@
+config() {
+  NEW="$1"
+  OLD="`dirname $NEW`/`basename $NEW .new`"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r $OLD ]; then
+    mv $NEW $OLD
+  elif [ "`cat $OLD | md5sum`" = "`cat $NEW | md5sum`" ]; then # toss the redundant copy
+    rm $NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+config etc/ftpusers.new
+config etc/proftpd.conf.new
+
+# Remove any old proftpd files:
+rm -f var/run/proftpd/proftpd*
+
diff --git a/source/n/proftpd/etc/ftpusers b/source/n/proftpd/etc/ftpusers
new file mode 100644
index 00000000..d08f2a1f
--- /dev/null
+++ b/source/n/proftpd/etc/ftpusers
@@ -0,0 +1,22 @@
+#
+# ftpusers	This file describes the names of the users that may
+#		_*NOT*_ log into the system via the FTP server.
+#		This usually includes "root", "uucp", "news" and the
+#		like, because those users have too much power to be
+#		allowed to do "just" FTP...
+#
+#
+# Version:	@(#)/etc/ftpusers	3.00	02/25/2001 volkerdi
+#
+# Original Author:  Fred N. van Kempen, <waltje@uwalt.nl.mugnet.org>
+#
+# The entire line gets matched, so no comments or extra characters on
+# lines containing a username.
+#
+# To enable anonymous FTP, remove the "ftp" user:
+ftp
+root
+uucp
+news
+
+# End of ftpusers.
diff --git a/source/n/proftpd/etc/proftpd.conf b/source/n/proftpd/etc/proftpd.conf
new file mode 100644
index 00000000..ffb0df3f
--- /dev/null
+++ b/source/n/proftpd/etc/proftpd.conf
@@ -0,0 +1,74 @@
+# This is a basic ProFTPD configuration file.
+# It establishes a single server and a single anonymous login.
+# It assumes that you have a user/group "nobody" and "ftp" 
+# for normal/anonymous operation.
+
+ServerName			"ProFTPD Default Installation"
+#ServerType			standalone
+ServerType			inetd
+DefaultServer			on
+
+# Port 21 is the standard FTP port.
+Port				21
+# Umask 022 is a good standard umask to prevent new dirs and files
+# from being group and world writable.
+Umask				022
+
+# To prevent DoS attacks, set the maximum number of child processes
+# to 30.  If you need to allow more than 30 concurrent connections
+# at once, simply increase this value.  Note that this ONLY works
+# in standalone mode, in inetd mode you should use an inetd server
+# that allows you to limit maximum number of processes per service
+# (such as xinetd)
+MaxInstances			30
+
+# Set the user and group that the server normally runs at.
+User				nobody
+Group				nogroup
+
+# This next option is required for NIS or NIS+ to work properly:
+#PersistentPasswd off
+
+SystemLog			/var/log/proftpd.log
+TransferLog			/var/log/xferlog
+
+# Normally, we want files to be overwriteable.
+<Directory /*>
+  AllowOverwrite		on
+</Directory>
+
+# A basic anonymous FTP server configuration.
+# To enable this, remove the user ftp from /etc/ftpusers.
+<Anonymous ~ftp>
+  RequireValidShell		off
+  User				ftp
+  Group				ftp
+  # We want clients to be able to login with "anonymous" as well as "ftp"
+  UserAlias			anonymous ftp
+
+  # Limit the maximum number of anonymous logins
+  MaxClients			50
+
+  # We want 'welcome.msg' displayed at login, and '.message' displayed
+  # in each newly chdired directory.
+  DisplayLogin			welcome.msg
+  DisplayChdir			.message
+
+  # Limit WRITE everywhere in the anonymous chroot
+  <Limit WRITE>
+    DenyAll
+  </Limit>
+
+  # An upload directory that allows storing files but not retrieving
+  # or creating directories.
+#  <Directory incoming/*>
+#    <Limit READ>
+#      DenyAll
+#    </Limit>
+#
+#    <Limit STOR>
+#      AllowAll
+#    </Limit>
+#  </Directory>
+
+</Anonymous>
diff --git a/source/n/proftpd/proftpd.SlackBuild b/source/n/proftpd/proftpd.SlackBuild
new file mode 100755
index 00000000..b004745a
--- /dev/null
+++ b/source/n/proftpd/proftpd.SlackBuild
@@ -0,0 +1,117 @@
+#!/bin/sh
+
+# Copyright 2008, 2009  Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+VERSION=1.3.2
+DIRVER=1.3.2
+ARCH=${ARCH:-x86_64}
+BUILD=${BUILD:-2}
+
+NUMJOBS=${NUMJOBS:-" -j7 "}
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-proftpd
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+cd $TMP
+rm -rf proftpd-$VERSION
+tar xvf $CWD/proftpd-$VERSION.tar.bz2 || exit 1
+cd proftpd-$DIRVER || exit 1
+
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \; -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \;
+
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --mandir=/usr/man \
+  --sysconfdir=/etc \
+  --enable-autoshadow \
+  --enable-ctrls \
+  --enable-ipv6 \
+  --localstatedir=/var/run \
+  --with-modules=mod_readme:mod_ratio:mod_tls:mod_wrap:mod_ctrls_admin \
+  --build=$ARCH-slackware-linux
+# This caused funny messages about "Quotas off" with every FTP command,
+# and mod_wrap gets a compile error:
+# --with-modules= ... mod_quota ...
+
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+# With no library to link against, these are useless:
+rm -rf $PKG/usr/include
+rm -f $PKG/etc/*
+rmdir $PKG/usr/libexec 2> /dev/null
+
+cat $CWD/etc/proftpd.conf > $PKG/etc/proftpd.conf.new
+cat $CWD/etc/ftpusers > $PKG/etc/ftpusers.new
+mkdir -p $PKG/home/ftp
+
+gzip -9 $PKG/usr/man/man?/*.?
+
+mkdir -p $PKG/usr/doc/proftpd-$VERSION
+cp -a COPYING CREDITS INSTALL NEWS README* \
+  contrib/README.mod_wrap contrib/README.ratio \
+  $PKG/usr/doc/proftpd-$VERSION
+head -c 93 ChangeLog > $PKG/usr/doc/proftpd-$VERSION/ChangeLog
+touch -r ChangeLog $PKG/usr/doc/proftpd-$VERSION/ChangeLog
+cp -a contrib/README $PKG/usr/doc/proftpd-$VERSION/README.contrib
+cp -a doc sample-configurations $PKG/usr/doc/proftpd-$VERSION
+# Bloat removal:
+( cd $PKG/usr/doc
+  find . -name "*.sgml" -exec rm {} \;
+  find . -name "*.pdf" -exec rm {} \;
+)
+rmdir $PKG/usr/share/locale
+rmdir $PKG/usr/share
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" \
+  | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+
+mkdir -p $PKG/install
+zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/proftpd-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/source/n/proftpd/slack-desc b/source/n/proftpd/slack-desc
new file mode 100644
index 00000000..5ed80ca9
--- /dev/null
+++ b/source/n/proftpd/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+       |-----handy-ruler------------------------------------------------------|
+proftpd: proftpd (FTP server daemon)
+proftpd:
+proftpd: ProFTPD is the Professional File Transfer Protocol (FTP) server
+proftpd: daemon.  ProFTPD grew out of the desire to have a secure and
+proftpd: configurable FTP server, and out of a significant admiration of the
+proftpd: Apache web server.
+proftpd:
+proftpd:
+proftpd:
+proftpd:
+proftpd: