Fri May 21 19:33:21 UTC 202120210521193321

a/exfatprogs-1.1.2-x86_64-1.txz:  Upgraded.
a/kmod-29-x86_64-1.txz:  Upgraded.
a/logrotate-3.18.1-x86_64-1.txz:  Upgraded.
a/pkgtools-15.0-noarch-41.txz:  Rebuilt.
  installpkg, upgradepkg: skip the install script when doing upgradepkg's
  pre-install. In cases where the script operations are expensive this can
  nearly double the speed of upgrading a package. Thanks to Stuart Winter.
ap/texinfo-6.7-x86_64-5.txz:  Rebuilt.
  Recompiled against perl-5.34.0.
ap/vim-8.2.2876-x86_64-1.txz:  Upgraded.
  Compiled against perl-5.34.0.
d/perl-5.34.0-x86_64-1.txz:  Upgraded.
d/sassc-3.6.2-x86_64-1.txz:  Upgraded.
d/subversion-1.14.1-x86_64-3.txz:  Rebuilt.
  Recompiled against perl-5.34.0.
l/libsass-3.6.5-x86_64-1.txz:  Upgraded.
l/libsigc++3-3.0.7-x86_64-1.txz:  Upgraded.
n/bind-9.16.16-x86_64-1.txz:  Upgraded.
n/epic5-2.1.4-x86_64-2.txz:  Rebuilt.
  Recompiled against perl-5.34.0.
n/irssi-1.2.3-x86_64-2.txz:  Rebuilt.
  Recompiled against perl-5.34.0.
n/libndp-1.8-x86_64-1.txz:  Upgraded.
n/net-snmp-5.9-x86_64-6.txz:  Rebuilt.
  Recompiled against perl-5.34.0.
n/ntp-4.2.8p15-x86_64-8.txz:  Rebuilt.
  Recompiled against perl-5.34.0.
n/openldap-2.4.58-x86_64-2.txz:  Rebuilt.
  Recompiled against perl-5.34.0.
x/mesa-21.1.1-x86_64-1.txz:  Upgraded.
xap/hexchat-2.14.3-x86_64-8.txz:  Rebuilt.
  Recompiled against perl-5.34.0.
xap/rxvt-unicode-9.26-x86_64-2.txz:  Rebuilt.
  Recompiled against perl-5.34.0.
xap/vim-gvim-8.2.2876-x86_64-1.txz:  Upgraded.
  Compiled against perl-5.34.0.

23 files changed, 97 insertions, 31 deletions

diff --git a/source/a/kmod/kmod.SlackBuild b/source/a/kmod/kmod.SlackBuild
index 5898846a..4a01bd78 100755
--- a/source/a/kmod/kmod.SlackBuild
+++ b/source/a/kmod/kmod.SlackBuild
@@ -26,8 +26,8 @@
 cd $(dirname $0) ; CWD=$(pwd)
 
 PKGNAM=kmod
-VERSION=${VERSION:-28}
-BUILD=${BUILD:-3}
+VERSION=${VERSION:-29}
+BUILD=${BUILD:-1}
 
 if [ -z "$ARCH" ]; then
   case "$( uname -m )" in
diff --git a/source/a/logrotate/logrotate.SlackBuild b/source/a/logrotate/logrotate.SlackBuild
index 6e750fc3..24674094 100755
--- a/source/a/logrotate/logrotate.SlackBuild
+++ b/source/a/logrotate/logrotate.SlackBuild
@@ -24,7 +24,7 @@ cd $(dirname $0) ; CWD=$(pwd)
 
 PKGNAM=logrotate
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.xz | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-3}
+BUILD=${BUILD:-1}
 
 NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
 
diff --git a/source/a/pkgtools/pkgtools.SlackBuild b/source/a/pkgtools/pkgtools.SlackBuild
index f0eca658..c34f82f5 100755
--- a/source/a/pkgtools/pkgtools.SlackBuild
+++ b/source/a/pkgtools/pkgtools.SlackBuild
@@ -30,7 +30,7 @@ PKGNAM=pkgtools
 # *** UPDATE THESE WITH EACH BUILD:
 VERSION=15.0
 ARCH=${ARCH:-noarch}
-BUILD=${BUILD:-40}
+BUILD=${BUILD:-41}
 
 # If the variable PRINT_PACKAGE_NAME is set, then this script will report what
 # the name of the created package would be, and then exit. This information
diff --git a/source/a/pkgtools/scripts/installpkg b/source/a/pkgtools/scripts/installpkg
index e7fa21c0..ee76cf13 100644
--- a/source/a/pkgtools/scripts/installpkg
+++ b/source/a/pkgtools/scripts/installpkg
@@ -1,7 +1,7 @@
 #!/bin/bash
 # Copyright 1994, 1998, 2000  Patrick Volkerding, Concord, CA, USA 
 # Copyright 2001, 2003  Slackware Linux, Inc., Concord, CA, USA
-# Copyright 2007, 2009, 2011, 2017, 2018, 2019, 2020  Patrick Volkerding, Sebeka, MN, USA 
+# Copyright 2007, 2009, 2011, 2017, 2018, 2019, 2020, 2021  Patrick Volkerding, Sebeka, MN, USA 
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -21,6 +21,17 @@
 #  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
 #  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 #
+# Thu May 20 18:55:21 UTC 2021
+# Add support for the flag ALWAYS_RUN_INSTALL_SCRIPT in doinst.sh. If it
+# appears, then the install script will always be run, even in the pre-install
+# pass.
+#
+# Wed May 19 18:11:44 UTC 2021
+# Don't run the install script if this is a pre-install pass as indicated by
+# upgradepkg setting PRE_INSTALL_PASS="true". Some of the install scripts can
+# take a significant amount of time to process, and there aren't any known
+# cases where they actually need to be run twice.
+#
 # Wed Apr  1 21:59:41 UTC 2020
 # If the package contains /install/douninst.sh, copy the uninstall script to
 # $ADM_DIR/douninst.sh/$shortname and add the filename to the package list
@@ -667,7 +678,20 @@ EOF
     ) 9> $INSTLOCKDIR/ldconfig.lock
   fi
 
+  # If we see ALWAYS_RUN_INSTALL_SCRIPT in the install script, then we'll
+  # unset PRE_INSTALL_PASS to ensure that the install script will be run even
+  # in a pre-install pass. We haven't found any case yet where skipping the
+  # install script in the pre-install pass breaks a package upgrade, but we'll
+  # add the ability to not skip it so there's a workaround if any corner cases
+  # emerge. Sorry to violate YAGNI like this. ;-)
   if [ -f $ROOT/$INSTDIR/doinst.sh ]; then
+    if grep -q ALWAYS_RUN_INSTALL_SCRIPT $ROOT/$INSTDIR/doinst.sh ; then
+      unset PRE_INSTALL_PASS
+    fi
+  fi
+
+  # Run the install script if one exists and this isn't a pre-install pass:
+  if [ -f $ROOT/$INSTDIR/doinst.sh -a ! "$PRE_INSTALL_PASS" = "true" ]; then
     if [ "$MODE" = "install" ]; then
       echo "Executing install script for $(basename $package)."
     fi
diff --git a/source/a/pkgtools/scripts/upgradepkg b/source/a/pkgtools/scripts/upgradepkg
index d71ca4b0..9ae3ce20 100644
--- a/source/a/pkgtools/scripts/upgradepkg
+++ b/source/a/pkgtools/scripts/upgradepkg
@@ -1,7 +1,7 @@
 #!/bin/bash
 # Copyright 1999  Patrick Volkerding, Moorhead, Minnesota, USA 
 # Copyright 2001, 2002, 2003  Slackware Linux, Inc., Concord, California, USA
-# Copyright 2009, 2015  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2009, 2015, 2021  Patrick J. Volkerding, Sebeka, MN, USA
 # Copyright 2015  Michal Nazarewicz <mina86@mina86.com>
 # All rights reserved.
 #
@@ -22,6 +22,11 @@
 #  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
 #  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 #
+# Wed May 19 04:46:53 UTC 2021
+# export PRE_INSTALL_PASS="true" if we'll be running installpkg a second time
+# for each package. Perhaps then we could skip some expensive install script
+# functions until the final pass. Thanks to Stuart Winter.
+#
 # Mon Jun  4 21:17:58 UTC 2018
 # Use /var/lib/pkgtools, not /var/log.
 #
@@ -353,7 +358,14 @@ EOF
 +==============================================================================
 EOF
   fi
+
   # Next, the new package is pre-installed:
+
+  # Signal to the install script that this is a pre-install, in case it cares:
+  if [ ! "$NOT_PARANOID" = "true" ]; then
+     export PRE_INSTALL_PASS="true"
+  fi
+
   if [ "$VERBOSE" = "verbose" ]; then
     if ! [ $TERSE ]; then
       /sbin/installpkg $INCOMINGDIR/$NNAME
@@ -379,6 +391,17 @@ EOF
       RETCODE=$?
     fi
   fi
+
+  # At this stage, if the operator supplied --no-paranoia, the package
+  # installation process (as far as unpacking content and running setup scripts
+  # is concerned) is complete.
+  # By default there will be a second and final installation pass, and to avoid
+  # executing expensive actions (such as re-generating data files or creating
+  # a large number of symlinks) installpkg skips running the install script on
+  # that first pass. Now we'll unset the PRE_INSTALL_PASS environment variable
+  # so that installpkg will run the install script.
+  unset PRE_INSTALL_PASS
+
   # Make sure that worked:
   if [ ! $RETCODE = 0 ]; then
     echo "ERROR: Package $INCOMINGDIR/$NNAME did not install"
diff --git a/source/ap/texinfo/texinfo.SlackBuild b/source/ap/texinfo/texinfo.SlackBuild
index 30a5055d..3e9e409b 100755
--- a/source/ap/texinfo/texinfo.SlackBuild
+++ b/source/ap/texinfo/texinfo.SlackBuild
@@ -24,7 +24,7 @@ cd $(dirname $0) ; CWD=$(pwd)
 
 PKGNAM=texinfo
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.xz | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-4}
+BUILD=${BUILD:-5}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
diff --git a/source/ap/vim/vim-gvim.SlackBuild b/source/ap/vim/vim-gvim.SlackBuild
index 8091411e..19d5060b 100755
--- a/source/ap/vim/vim-gvim.SlackBuild
+++ b/source/ap/vim/vim-gvim.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/bash
 
-# Copyright 2008, 2009, 2010, 2013, 2016, 2018, 2019  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# Copyright 2008, 2009, 2010, 2013, 2016, 2018, 2019, 2021  Patrick J. Volkerding, Sebeka, Minnesota, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -34,6 +34,11 @@ VIMBRANCH=8.2
 VERSION=$(echo vim-${VIMBRANCH}*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)
 BUILD=${BUILD:-1}
 
+# The possible settings for this are yes/no/dynamic. We've been using dynamic,
+# but that's not currently compiling against perl-5.34.0. So we'll use "yes"
+# until "dynamic" works again, which probably won't take long.
+PERLINTERP=${PERLINTERP:-yes}
+
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
   case "$( uname -m )" in
@@ -87,7 +92,7 @@ CFLAGS="$SLKCFLAGS" LDFLAGS="$SLKLDFLAGS" \
   --prefix=/usr \
   --with-python-config-dir=/usr/lib${LIBDIRSUFFIX}/python$PYVER/config \
   --with-python3-config-dir=$(python3-config --configdir) \
-  --enable-perlinterp=dynamic \
+  --enable-perlinterp=$PERLINTERP \
   --enable-pythoninterp=dynamic \
   --enable-python3interp=dynamic \
   --enable-rubyinterp${RUBYDYNAMIC} \
diff --git a/source/ap/vim/vim.SlackBuild b/source/ap/vim/vim.SlackBuild
index 1ef6744b..437ab495 100755
--- a/source/ap/vim/vim.SlackBuild
+++ b/source/ap/vim/vim.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/bash
 
-# Copyright 2008, 2009, 2010, 2013, 2016, 2018, 2019, 2020  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# Copyright 2008, 2009, 2010, 2013, 2016, 2018, 2019, 2020, 2021  Patrick J. Volkerding, Sebeka, Minnesota, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -27,6 +27,11 @@ VIMBRANCH=8.2
 CTAGSVER=5.8
 BUILD=${BUILD:-1}
 
+# The possible settings for this are yes/no/dynamic. We've been using dynamic,
+# but that's not currently compiling against perl-5.34.0. So we'll use "yes"
+# until "dynamic" works again, which probably won't take long.
+PERLINTERP=${PERLINTERP:-yes}
+
 if [ -r vim-${VIMBRANCH}*.tar.?z ]; then # if there's a source archive already, use the version number from it:
   VERSION=$(echo vim-${VIMBRANCH}*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)
 else # need to fetch the latest source archive for this branch:
@@ -123,7 +128,7 @@ CFLAGS="$SLKCFLAGS" \
   --prefix=/usr \
   --with-python-config-dir=/usr/lib${LIBDIRSUFFIX}/python$PYVER/config \
   --with-python3-config-dir=$(python3-config --configdir) \
-  --enable-perlinterp=dynamic \
+  --enable-perlinterp=$PERLINTERP \
   --enable-pythoninterp=dynamic \
   --enable-python3interp=dynamic \
   --enable-rubyinterp${RUBYDYNAMIC} \
diff --git a/source/d/perl/perl.SlackBuild b/source/d/perl/perl.SlackBuild
index 6b7899d4..01df02a1 100755
--- a/source/d/perl/perl.SlackBuild
+++ b/source/d/perl/perl.SlackBuild
@@ -26,8 +26,8 @@
 cd $(dirname $0) ; CWD=$(pwd)
 
 PKGNAM=perl
-VERSION=5.32.1
-BUILD=${BUILD:-2}
+VERSION=5.34.0
+BUILD=${BUILD:-1}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
@@ -68,7 +68,7 @@ GETTEXT=1.07
 # https://metacpan.org/release/TermReadKey
 TERMREADKEY=2.38
 # https://metacpan.org/release/URI
-URI=5.06
+URI=5.09
 # https://metacpan.org/release/XML-Parser
 XMLPARSER=2.46
 # https://metacpan.org/release/XML-Simple
@@ -78,7 +78,7 @@ AUTHENSASL=2.16
 # https://metacpan.org/release/MIME-Base64
 MIMEBASE64=3.16
 # https://metacpan.org/release/IO-Socket-SSL
-IOSOCKETSSL=2.069
+IOSOCKETSSL=2.070
 # https://metacpan.org/release/Net-SSLeay
 NETSSLEAY=1.90
 # https://metacpan.org/release/libnet
@@ -86,11 +86,11 @@ LIBNET=3.13
 # https://metacpan.org/release/Parse-Yapp
 PARSEYAPP=1.21
 # https://metacpan.org/release/Path-Tiny (freecell-solver)
-PATHTINY=0.116
+PATHTINY=0.118
 # https://metacpan.org/release/Template-Toolkit (freecell-solver)
 TEMPLATETOOLKIT=3.009
 # https://metacpan.org/release/Moo (freecell-solver)
-MOO=2.004004
+MOO=2.005004
 # https://metacpan.org/pod/Module::Runtime (freecell-solver)
 MODULERUNTIME=0.016
 # https://metacpan.org/pod/Sub::Quote (freecell-solver)
diff --git a/source/d/perl/slack-desc b/source/d/perl/slack-desc
index cd05fa75..ebbe2956 100644
--- a/source/d/perl/slack-desc
+++ b/source/d/perl/slack-desc
@@ -15,5 +15,5 @@ perl: information. It's also a good language for many system management
 perl: tasks. The language is intended to be practical (easy to use,
 perl: efficient, complete) rather than beautiful (tiny, elegant, minimal).
 perl:
-perl: Homepage: http://www.perl.org
+perl: Homepage: https://www.perl.org
 perl:
diff --git a/source/d/sassc/sassc.SlackBuild b/source/d/sassc/sassc.SlackBuild
index 4ef8bf23..f32a0c18 100755
--- a/source/d/sassc/sassc.SlackBuild
+++ b/source/d/sassc/sassc.SlackBuild
@@ -25,7 +25,7 @@ cd $(dirname $0) ; CWD=$(pwd)
 
 PKGNAM=sassc
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-3}
+BUILD=${BUILD:-1}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
diff --git a/source/d/subversion/subversion.SlackBuild b/source/d/subversion/subversion.SlackBuild
index 8ccc268d..a3d59afd 100755
--- a/source/d/subversion/subversion.SlackBuild
+++ b/source/d/subversion/subversion.SlackBuild
@@ -24,7 +24,7 @@ cd $(dirname $0) ; CWD=$(pwd)
 
 PKGNAM=subversion
 VERSION=${VERSION:-$(echo subversion-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-2}
+BUILD=${BUILD:-3}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
diff --git a/source/l/libsass/libsass.SlackBuild b/source/l/libsass/libsass.SlackBuild
index d27dadf3..b5f0ce85 100755
--- a/source/l/libsass/libsass.SlackBuild
+++ b/source/l/libsass/libsass.SlackBuild
@@ -25,7 +25,7 @@ cd $(dirname $0) ; CWD=$(pwd)
 
 PKGNAM=libsass
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-3}
+BUILD=${BUILD:-1}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
diff --git a/source/n/epic5/epic5.SlackBuild b/source/n/epic5/epic5.SlackBuild
index 7a8943b4..777e424b 100755
--- a/source/n/epic5/epic5.SlackBuild
+++ b/source/n/epic5/epic5.SlackBuild
@@ -26,7 +26,7 @@ PKGNAM=epic5
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.xz | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
 EPICVER=5
 HELPFILE=current
-BUILD=${BUILD:-1}
+BUILD=${BUILD:-2}
 
 ## Default to no Ruby support, since it seems that ruby-2.7.0 is not compatible.
 ## Patches to fix this are welcome, otherwise we'll keep an eye on upstream.
diff --git a/source/n/irssi/irssi.SlackBuild b/source/n/irssi/irssi.SlackBuild
index db34640d..4437ed25 100755
--- a/source/n/irssi/irssi.SlackBuild
+++ b/source/n/irssi/irssi.SlackBuild
@@ -28,7 +28,7 @@ PKG=$TMP/package-irssi
 
 VERSION=${VERSION:-$(echo irssi-*.tar.xz | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
 DIRCD=${VERSION}
-BUILD=${BUILD:-1}
+BUILD=${BUILD:-2}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
diff --git a/source/n/libndp/libndp.SlackBuild b/source/n/libndp/libndp.SlackBuild
index 89a718c9..06688174 100755
--- a/source/n/libndp/libndp.SlackBuild
+++ b/source/n/libndp/libndp.SlackBuild
@@ -3,7 +3,7 @@
 # Slackware build script for libndp
 
 # Copyright 2014  Robby Workman, Northport, Alabama, USA
-# Copyright 2015, 2016, 2018  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2015, 2016, 2018, 2021  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -27,7 +27,7 @@ cd $(dirname $0) ; CWD=$(pwd)
 
 PKGNAM=libndp
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-3}
+BUILD=${BUILD:-1}
 
 if [ -z "$ARCH" ]; then
   case "$( uname -m )" in
@@ -77,6 +77,14 @@ find -L . \
  \( -perm 666 -o -perm 664 -o -perm 640 -o -perm 600 -o -perm 444 \
  -o -perm 440 -o -perm 400 \) -exec chmod 644 {} \+
 
+if [ ! -r configure ]; then
+  if [ -x ./autogen.sh ]; then
+    NOCONFIGURE=1 ./autogen.sh
+  else
+    autoreconf -vif
+  fi
+fi
+
 CFLAGS="$SLKCFLAGS" \
 CXXFLAGS="$SLKCFLAGS" \
 ./configure \
diff --git a/source/n/libndp/libndp.url b/source/n/libndp/libndp.url
new file mode 100644
index 00000000..b67f7297
--- /dev/null
+++ b/source/n/libndp/libndp.url
@@ -0,0 +1 @@
+https://github.com/jpirko/libndp
diff --git a/source/n/net-snmp/net-snmp.SlackBuild b/source/n/net-snmp/net-snmp.SlackBuild
index 222ab0cf..2058700b 100755
--- a/source/n/net-snmp/net-snmp.SlackBuild
+++ b/source/n/net-snmp/net-snmp.SlackBuild
@@ -24,7 +24,7 @@ cd $(dirname $0) ; CWD=$(pwd)
 
 PKGNAM=net-snmp
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-5}
+BUILD=${BUILD:-6}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
diff --git a/source/n/ntp/ntp.SlackBuild b/source/n/ntp/ntp.SlackBuild
index 7f8be710..e68125b8 100755
--- a/source/n/ntp/ntp.SlackBuild
+++ b/source/n/ntp/ntp.SlackBuild
@@ -24,7 +24,7 @@ cd $(dirname $0) ; CWD=$(pwd)
 
 PKGNAM=ntp
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-7}
+BUILD=${BUILD:-8}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
diff --git a/source/n/openldap/openldap.SlackBuild b/source/n/openldap/openldap.SlackBuild
index 3b6171c6..4c64439c 100755
--- a/source/n/openldap/openldap.SlackBuild
+++ b/source/n/openldap/openldap.SlackBuild
@@ -25,7 +25,7 @@ cd $(dirname $0) ; CWD=$(pwd)
 
 PKGNAM=openldap
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-1}
+BUILD=${BUILD:-2}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
diff --git a/source/x/mesa/mesa.SlackBuild b/source/x/mesa/mesa.SlackBuild
index f5c37a40..b64311c5 100755
--- a/source/x/mesa/mesa.SlackBuild
+++ b/source/x/mesa/mesa.SlackBuild
@@ -25,7 +25,7 @@ cd $(dirname $0) ; CWD=$(pwd)
 PKGNAM=mesa
 VERSION=${VERSION:-$(echo $PKGNAM-[0-9]*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
 DEMOVERS=${DEMOVERS:-8.4.0}
-BUILD=${BUILD:-2}
+BUILD=${BUILD:-1}
 BUILD_DEMOS=${BUILD_DEMOS:-YES}
 
 NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
diff --git a/source/xap/hexchat/hexchat.SlackBuild b/source/xap/hexchat/hexchat.SlackBuild
index 2a59163b..22e43886 100755
--- a/source/xap/hexchat/hexchat.SlackBuild
+++ b/source/xap/hexchat/hexchat.SlackBuild
@@ -24,7 +24,7 @@ cd $(dirname $0) ; CWD=$(pwd)
 
 PKGNAM=hexchat
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-7}
+BUILD=${BUILD:-8}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
diff --git a/source/xap/rxvt-unicode/rxvt-unicode.SlackBuild b/source/xap/rxvt-unicode/rxvt-unicode.SlackBuild
index fa213eaf..7bc90c33 100755
--- a/source/xap/rxvt-unicode/rxvt-unicode.SlackBuild
+++ b/source/xap/rxvt-unicode/rxvt-unicode.SlackBuild
@@ -24,7 +24,7 @@ cd $(dirname $0) ; CWD=$(pwd)
 
 PKGNAM=rxvt-unicode
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-1}
+BUILD=${BUILD:-2}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then