Sun Jan 23 01:17:39 UTC 202220220123011739

ap/ddrescue-1.26-x86_64-1.txz:  Upgraded.
d/parallel-20220122-noarch-1.txz:  Upgraded.
l/libimobiledevice-20211124_2c6121d-x86_64-2.txz:  Rebuilt.
  Don't include compatibility pkgconfig symlink. It's unlikely that
  anything requires it.
l/libimobiledevice-glue-20211125_3cb687b-x86_64-2.txz:  Rebuilt.
  Removed broken pkgconfig symlink. Thanks to marav.
isolinux/initrd.img:  Rebuilt.
usb-and-pxe-installers/usbboot.img:  Rebuilt.

6 files changed, 328 insertions, 955 deletions

diff --git a/source/ap/ddrescue/ddrescue.SlackBuild b/source/ap/ddrescue/ddrescue.SlackBuild
index e37c9a15..26940981 100755
--- a/source/ap/ddrescue/ddrescue.SlackBuild
+++ b/source/ap/ddrescue/ddrescue.SlackBuild
@@ -24,7 +24,7 @@ cd $(dirname $0) ; CWD=$(pwd)
 
 PKGNAM=ddrescue
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.lz | rev | cut -f 3- -d . | rev | cut -f 2- -d -)}
-BUILD=${BUILD:-3}
+BUILD=${BUILD:-1}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
diff --git a/source/installer/ChangeLog.txt b/source/installer/ChangeLog.txt
index 5282ea36..cc5c2610 100644
--- a/source/installer/ChangeLog.txt
+++ b/source/installer/ChangeLog.txt
@@ -1,3 +1,13 @@
+Sat Jan 22 21:34:07 UTC 2022
+  Reverted to an older simpler version of rescan-scsi-bus that does what we
+  need it to on the installer. Apparently the one we upgraded to requires the
+  real version of "find" and has additional requirements resulting in it being
+  broken for almost a year. Since nobody noticed until now, I wonder to what
+  extent this functionality is still important on modern hardware, but we'll
+  fix it anyway just in case. Thanks to almope.
+  Added sg.ko kernel module (rescan-scsi-bus has always wanted this but never
+  previously got it, so we'll add it and hope it helps).
++--------------------------+
 Tue Jan 18 11:42:59 UTC 2022
   /usr/lib/setup/setup: If a Slackware USB stick was used as the package
   source, prompt user to unplug the USB stick when the installation
diff --git a/source/installer/build_installer.sh b/source/installer/build_installer.sh
index c46d0bb1..42bb2353 100755
--- a/source/installer/build_installer.sh
+++ b/source/installer/build_installer.sh
@@ -1571,6 +1571,7 @@ for ind in $(seq 0 $((${#KERNELS[*]} -1)) ); do
          rm -rf${VERBOSE1} cdrom ide md scsi
          mkdir scsi
          mv scsi.orig/hv_storvsc.ko scsi
+         mv scsi.orig/sg.ko scsi
          rm -rf${VERBOSE1} scsi.orig
          mkdir md
          mv md.orig/dm-bufio.ko md
diff --git a/source/installer/sources/initrd/sbin/rescan-scsi-bus b/source/installer/sources/initrd/sbin/rescan-scsi-bus
index 077cadba..4be8f01e 100755
--- a/source/installer/sources/initrd/sbin/rescan-scsi-bus
+++ b/source/installer/sources/initrd/sbin/rescan-scsi-bus
@@ -1,10 +1,10 @@
 #!/bin/bash
-# Script to rescan SCSI bus, using the scsi add-single-device mechanism.
+# Skript to rescan SCSI bus, using the 
+# scsi add-single-device mechanism
 # (c) 1998--2010 Kurt Garloff <kurt@garloff.de>, GNU GPL v2 or v3
-# (c) 2006--2018 Hannes Reinecke, GNU GPL v2 or later
-# $Id: rescan-scsi-bus.sh,v 1.57 2012/03/31 14:08:48 garloff Exp $
+# (c) 2006--2008 Hannes Reinecke, GNU GPL v2 or later
+# $Id: rescan-scsi-bus.sh,v 1.56 2012/01/14 22:23:53 garloff Exp $
 
-VERSION="20180615"
 SCAN_WILD_CARD=4294967295
 
 setcolor ()
@@ -16,19 +16,12 @@ setcolor ()
   norm="\e[0;0m"
 }
 
-unsetcolor ()
+unsetcolor () 
 {
   red=""; green=""
   yellow=""; norm=""
 }
 
-echo_debug()
-{
-  if [ "$debug" -eq 1 ] ; then
-     echo "$1"
-  fi
-}
-
 # Output some text and return cursor to previous position
 # (only works for simple strings)
 # Stores length of string in LN and returns it
@@ -38,43 +31,44 @@ print_and_scroll_back ()
   LN=${#STRG}
   BK=""
   declare -i cntr=0
-  while [ $cntr -lt "$LN" ] ; do BK="$BK\e[D"; let cntr+=1; done
+  while test $cntr -lt $LN; do BK="$BK\e[D"; let cntr+=1; done
   echo -en "$STRG$BK"
-  return "$LN"
+  return $LN
 }
 
-# Overwrite a text of length $LN with whitespace
+# Overwrite a text of length $1 (fallback to $LN) with whitespace
 white_out ()
 {
   BK=""; WH=""
+  if test -n "$1"; then LN=$1; fi
   declare -i cntr=0
-  while [ $cntr -lt "$LN" ] ; do BK="$BK\e[D"; WH="$WH "; let cntr+=1; done
+  while test $cntr -lt $LN; do BK="$BK\e[D"; WH="$WH "; let cntr+=1; done
   echo -en "$WH$BK"
 }
 
 # Return hosts. sysfs must be mounted
 findhosts_26 ()
 {
-  hosts=
-  for hostdir in /sys/class/scsi_host/host* ; do
-    [ -e "$hostdir" ] || continue
+  hosts=`find /sys/class/scsi_host/host* -maxdepth 4 -type d -o -type l 2> /dev/null | awk -F'/' '{print $5}' | sed -e 's~host~~' | sort -nu` 
+  scsi_host_data=`echo "$hosts" | sed -e 's~^~/sys/class/scsi_host/host~'` 
+  for hostdir in $scsi_host_data; do 
     hostno=${hostdir#/sys/class/scsi_host/host}
-    if [ -f "$hostdir/isp_name" ] ; then
+    if [ -f $hostdir/isp_name ] ; then
       hostname="qla2xxx"
-    elif [ -f "$hostdir/lpfc_drvr_version" ] ; then
+    elif [ -f $hostdir/lpfc_drvr_version ] ; then
       hostname="lpfc"
     else
-      hostname=$(cat "$hostdir/proc_name")
+      hostname=`cat $hostdir/proc_name`
     fi
-    hosts="$hosts $hostno"
-    echo_debug "Host adapter $hostno ($hostname) found."
-  done
+    #hosts="$hosts $hostno"
+    echo "Host adapter $hostno ($hostname) found."
+  done  
   if [ -z "$hosts" ] ; then
     echo "No SCSI host adapters found in sysfs"
     exit 1;
   fi
   # Not necessary just use double quotes around variable to preserve new lines
-  #hosts=$(echo $hosts | tr ' ' '\n')
+  #hosts=`echo $hosts | tr ' ' '\n'`
 }
 
 # Return hosts. /proc/scsi/HOSTADAPTER/? must exist
@@ -83,15 +77,15 @@ findhosts ()
   hosts=
   for driverdir in /proc/scsi/*; do
     driver=${driverdir#/proc/scsi/}
-    if [ "$driver" = scsi ] || [ "$driver" = sg ] || [ "$driver" = dummy ] || [ "$driver" = device_info  ] ; then continue; fi
+    if test $driver = scsi -o $driver = sg -o $driver = dummy -o $driver = device_info; then continue; fi
     for hostdir in $driverdir/*; do
       name=${hostdir#/proc/scsi/*/}
-      if [ "$name" = add_map ] || [ "$name" = map ]  || [ "$name" = mod_parm ] ; then continue; fi
+      if test $name = add_map -o $name = map -o $name = mod_parm; then continue; fi
       num=$name
       driverinfo=$driver
-      if [ -r "$hostdir/status" ] ; then
-        num=$(printf '%d\n' "$(sed -n 's/SCSI host number://p' "$hostdir/status")")
-        driverinfo="$driver:$name"
+      if test -r $hostdir/status; then
+	num=$(printf '%d\n' `sed -n 's/SCSI host number://p' $hostdir/status`)
+	driverinfo="$driver:$name"
       fi
       hosts="$hosts $num"
       echo "Host adapter $num ($driverinfo) found."
@@ -104,28 +98,28 @@ printtype ()
   local type=$1
 
   case "$type" in
-    0) echo "Direct-Access" ;;
+    0) echo "Direct-Access    " ;;
     1) echo "Sequential-Access" ;;
-    2) echo "Printer" ;;
-    3) echo "Processor" ;;
-    4) echo "WORM" ;;
-    5) echo "CD-ROM" ;;
-    6) echo "Scanner" ;;
-    7) echo "Optical-Device" ;;
-    8) echo "Medium-Changer" ;;
-    9) echo "Communications" ;;
-    10) echo "Unknown" ;;
-    11) echo "Unknown" ;;
-    12) echo "RAID" ;;
-    13) echo "Enclosure" ;;
+    2) echo "Printer          " ;;
+    3) echo "Processor        " ;;
+    4) echo "WORM             " ;;
+    5) echo "CD-ROM           " ;;
+    6) echo "Scanner          " ;;
+    7) echo "Optical Device   " ;;
+    8) echo "Medium Changer   " ;;
+    9) echo "Communications   " ;;
+    10) echo "Unknown          " ;;
+    11) echo "Unknown          " ;;
+    12) echo "RAID             " ;;
+    13) echo "Enclosure        " ;;
     14) echo "Direct-Access-RBC" ;;
-    *) echo "Unknown" ;;
+    *) echo "Unknown          " ;;
   esac
 }
 
 print02i()
 {
-    if [ "$1" = "*" ] ; then
+    if [ "$1" = "*" ] ; then 
         echo "00"
     else
         printf "%02i" "$1"
@@ -133,36 +127,32 @@ print02i()
 }
 
 # Get /proc/scsi/scsi info for device $host:$channel:$id:$lun
-# Optional parameter: Number of lines after first (default = 2),
+# Optional parameter: Number of lines after first (default = 2), 
 # result in SCSISTR, return code 1 means empty.
 procscsiscsi ()
-{
-  if [ -z "$1" ] ; then
-    LN=2
-  else
-    LN=$1
-  fi
-  CHANNEL=$(print02i "$channel")
-  ID=$(print02i "$id")
-  LUN=$(print02i "$lun")
+{  
+  if test -z "$1"; then LN=2; else LN=$1; fi
+  CHANNEL=`print02i "$channel"`
+  ID=`print02i "$id"`
+  LUN=`print02i "$lun"`
   if [ -d /sys/class/scsi_device ]; then
     SCSIPATH="/sys/class/scsi_device/${host}:${channel}:${id}:${lun}"
     if [ -d  "$SCSIPATH" ] ; then
       SCSISTR="Host: scsi${host} Channel: $CHANNEL Id: $ID Lun: $LUN"
       if [ "$LN" -gt 0 ] ; then
-        IVEND=$(cat "${SCSIPATH}/device/vendor")
-        IPROD=$(cat "${SCSIPATH}/device/model")
-        IPREV=$(cat "${SCSIPATH}/device/rev")
-        SCSIDEV=$(printf '  Vendor: %-08s Model: %-16s Rev: %-4s' "$IVEND" "$IPROD" "$IPREV")
-        SCSISTR="$SCSISTR
+	IVEND=$(cat ${SCSIPATH}/device/vendor)
+	IPROD=$(cat ${SCSIPATH}/device/model)
+	IPREV=$(cat ${SCSIPATH}/device/rev)
+	SCSIDEV=$(printf '  Vendor: %-08s Model: %-16s Rev: %-4s' "$IVEND" "$IPROD" "$IPREV")
+	SCSISTR="$SCSISTR
 $SCSIDEV"
       fi
       if [ "$LN" -gt 1 ] ; then
-        ILVL=$(cat "${SCSIPATH}/device/scsi_level")
-        type=$(cat "${SCSIPATH}/device/type")
-        ITYPE=$(printtype "$type")
-        SCSITMP=$(printf '  Type:   %-17s                ANSI SCSI revision: %02d' "$ITYPE" "$((ILVL - 1))")
-        SCSISTR="$SCSISTR
+	ILVL=$(cat ${SCSIPATH}/device/scsi_level)
+	type=$(cat ${SCSIPATH}/device/type)
+	ITYPE=$(printtype $type)
+	SCSITMP=$(printf '  Type:   %-16s                ANSI SCSI revision: %02d' "$ITYPE" "$((ILVL - 1))")
+	SCSISTR="$SCSISTR
 $SCSITMP"
       fi
     else
@@ -170,39 +160,33 @@ $SCSITMP"
     fi
   else
     grepstr="scsi$host Channel: $CHANNEL Id: $ID Lun: $LUN"
-    SCSISTR=$(grep -A "$LN" -e "$grepstr" /proc/scsi/scsi)
-  fi
-  if [ -z "$SCSISTR" ] ; then
-    return 1
-  else
-    return 0
+    SCSISTR=`cat /proc/scsi/scsi | grep -A$LN -e"$grepstr"`
   fi
+  if test -z "$SCSISTR"; then return 1; else return 0; fi
 }
 
 # Find sg device with 2.6 sysfs support
 sgdevice26 ()
 {
-  local gendev
-
-  gendev=/sys/class/scsi_device/${host}:${channel}:${id}:${lun}/device/generic
-  if [ -e "$gendev" ] ; then
-    SGDEV=$(basename "$(readlink "$gendev")")
+  if test -e /sys/class/scsi_device/$host\:$channel\:$id\:$lun/device/generic; then	
+    SGDEV=`readlink /sys/class/scsi_device/$host\:$channel\:$id\:$lun/device/generic`
+    SGDEV=`basename $SGDEV`
   else
     for SGDEV in /sys/class/scsi_generic/sg*; do
-      DEV=$(readlink "$SGDEV/device")
-      if [ "${DEV##*/}" = "$host:$channel:$id:$lun" ] ; then
-        SGDEV=$(basename "$SGDEV"); return
+      DEV=`readlink $SGDEV/device`
+      if test "${DEV##*/}" = "$host:$channel:$id:$lun"; then
+	SGDEV=`basename $SGDEV`; return
       fi
     done
     SGDEV=""
-  fi
+  fi  
 }
 
 # Find sg device with 2.4 report-devs extensions
 sgdevice24 ()
 {
   if procscsiscsi 3; then
-    SGDEV=$(echo "$SCSISTR" | grep 'Attached drivers:' | sed 's/^ *Attached drivers: \(sg[0-9]*\).*/\1/')
+    SGDEV=`echo "$SCSISTR" | grep 'Attached drivers:' | sed 's/^ *Attached drivers: \(sg[0-9]*\).*/\1/'`
   fi
 }
 
@@ -211,17 +195,17 @@ sgdevice24 ()
 sgdevice ()
 {
   SGDEV=
-  if [ -d /sys/class/scsi_device ] ; then
+  if test -d /sys/class/scsi_device; then
     sgdevice26
-  else
-    DRV=$(grep 'Attached drivers:' /proc/scsi/scsi 2>/dev/null)
+  else  
+    DRV=`grep 'Attached drivers:' /proc/scsi/scsi 2>/dev/null`
     repdevstat=$((1-$?))
     if [ $repdevstat = 0 ]; then
       echo "scsi report-devs 1" >/proc/scsi/scsi
-      DRV=$(grep 'Attached drivers:' /proc/scsi/scsi 2>/dev/null)
-      [ $? -eq 1 ] && return
+      DRV=`grep 'Attached drivers:' /proc/scsi/scsi 2>/dev/null`
+      if [ $? = 1 ]; then return; fi
     fi
-    if ! echo "$DRV" | grep -q 'drivers: sg'; then
+    if ! `echo $DRV | grep 'drivers: sg' >/dev/null`; then
       modprobe sg
     fi
     sgdevice24
@@ -231,129 +215,70 @@ sgdevice ()
   fi
 }
 
-# Whether or not the RMB (removable) bit has been set in the INQUIRY response.
-# Uses ${host}, ${channel}, ${id} and ${lun}. Assumes that sg_device() has
-# already been called. How to test this function: copy/paste this function
-# in a shell and run
-# (cd /sys/class/scsi_device && for d in *; do set ${d//:/ }; echo -n "$d $(</sys/class/scsi_device/${d}/device/block/*/removable) <> "; SGDEV=bsg/$d host=$1 channel=$2 id=$3 lun=$4 is_removable; done)
-is_removable ()
-{
-  local b p
-
-  p=/sys/class/scsi_device/${host}:${channel}:${id}:${lun}/device/inquiry
-  # Extract the second byte of the INQUIRY response and check bit 7 (mask 0x80).
-  b=$(hexdump -n1 -e '/1 "%02X"' "$p" 2>/dev/null)
-  if [ -n "$b" ]; then
-    echo $(((0x$b & 0x80) != 0))
-  else
-    sg_inq /dev/$SGDEV 2>/dev/null | sed -n 's/^.*RMB=\([0-9]*\).*$/\1/p'
-  fi
-}
-
 # Test if SCSI device is still responding to commands
-# Return values:
-#   0 device is present
-#   1 device has changed
-#   2 device has been removed
 testonline ()
 {
-  local ctr RC RMB
-
   : testonline
-  ctr=0
   RC=0
-  # Set default values
-  IPTYPE=31
-  IPQUAL=3
-  [ ! -x /usr/bin/sg_turs ] && return 0
+  if test ! -x /usr/bin/sg_turs; then return 0; fi
   sgdevice
-  [ -z "$SGDEV" ] && return 0
+  if test -z "$SGDEV"; then return 0; fi
   sg_turs /dev/$SGDEV >/dev/null 2>&1
   RC=$?
-
-  # Handle in progress of becoming ready and unit attention
-  while [ $RC = 2 -o $RC = 6 ] && [ $ctr -le 30 ] ; do
-    if [ $RC = 2 ] && [ "$RMB" != "1" ] ; then
-      echo -n "."
-      let LN+=1
-      sleep 1
-    else
-      sleep 0.02
-    fi
+  # Handle in progress of becoming ready and unit attention -- wait at max 11s
+  declare -i ctr=0
+  if test $RC = 2 -o $RC = 6; then 
+    RMB=`sg_inq /dev/$SGDEV | grep 'RMB=' | sed 's/^.*RMB=\(.\).*$/\1/'`
+    print_and_scroll_back "$host:$channel:$id:$lun $SGDEV ($RMB) "
+  fi
+  while test $RC = 2 -o $RC = 6 && test $ctr -le 8; do
+    if test $RC = 2 -a "$RMB" != "1"; then echo -n "."; let $LN+=1; sleep 1
+    else usleep 20000; fi
     let ctr+=1
     sg_turs /dev/$SGDEV >/dev/null 2>&1
     RC=$?
-    # Check for removable device; TEST UNIT READY obviously will
-    # fail for a removable device with no medium
-    RMB=$(is_removable)
-    print_and_scroll_back "$host:$channel:$id:$lun $SGDEV ($RMB) "
-    [ $RC = 2 ] && [ "$RMB" = "1" ] && break
   done
-  if [ $ctr != 0 ] ; then
-    white_out
-  fi
+  if test $ctr != 0; then white_out; fi
   # echo -e "\e[A\e[A\e[A${yellow}Test existence of $SGDEV = $RC ${norm} \n\n\n"
-  [ $RC = 1 ] && return $RC
+  if test $RC = 1; then return $RC; fi
   # Reset RC (might be !=0 for passive paths)
   RC=0
   # OK, device online, compare INQUIRY string
-  INQ=$(sg_inq "$sg_len_arg" /dev/$SGDEV 2>/dev/null)
-  if [ -z "$INQ" ] ; then
-    echo -e "\e[A\e[A\e[A\e[A${red}$SGDEV changed: ${bold}INQUIRY failed${norm}    \n\n\n"
-    return 2
-  fi
-  IVEND=$(echo "$INQ" | grep 'Vendor identification:' | sed 's/^[^:]*: \(.*\)$/\1/')
-  IPROD=$(echo "$INQ" | grep 'Product identification:' | sed 's/^[^:]*: \(.*\)$/\1/')
-  IPREV=$(echo "$INQ" | grep 'Product revision level:' | sed 's/^[^:]*: \(.*\)$/\1/')
-  STR=$(printf "  Vendor: %-08s Model: %-16s Rev: %-4s" "$IVEND" "$IPROD" "$IPREV")
-  IPTYPE=$(echo "$INQ" | sed -n 's/.* Device_type=\([0-9]*\) .*/\1/p')
-  IPQUAL=$(echo "$INQ" | sed -n 's/ *PQual=\([0-9]*\)  Device.*/\1/p')
+  INQ=`sg_inq $sg_len_arg /dev/$SGDEV 2>/dev/null`
+  IVEND=`echo "$INQ" | grep 'Vendor identification:' | sed 's/^[^:]*: \(.*\)$/\1/'`
+  IPROD=`echo "$INQ" | grep 'Product identification:' | sed 's/^[^:]*: \(.*\)$/\1/'`
+  IPREV=`echo "$INQ" | grep 'Product revision level:' | sed 's/^[^:]*: \(.*\)$/\1/'`
+  STR=`printf "  Vendor: %-08s Model: %-16s Rev: %-4s" "$IVEND" "$IPROD" "$IPREV"`
+  IPTYPE=`echo "$INQ" | sed -n 's/.* Device_type=\([0-9]*\) .*/\1/p'`
+  IPQUAL=`echo "$INQ" | sed -n 's/ *PQual=\([0-9]*\)  Device.*/\1/p'`
   if [ "$IPQUAL" != 0 ] ; then
-    [ -z "$IPQUAL" ] && IPQUAL=3
-    [ -z "$IPTYPE" ] && IPTYPE=31
     echo -e "\e[A\e[A\e[A\e[A${red}$SGDEV changed: ${bold}LU not available (PQual $IPQUAL)${norm}    \n\n\n"
     return 2
   fi
 
   TYPE=$(printtype $IPTYPE)
-  if ! procscsiscsi ; then
-    echo -e "\e[A\e[A\e[A\e[A${red}$SGDEV removed.\n\n\n"
-    return 2
-  fi
-  TMPSTR=$(echo "$SCSISTR" | grep 'Vendor:')
-  if [ "$ignore_rev" -eq 0 ] ; then
-      if [ "$TMPSTR" != "$STR" ]; then
-        echo -e "\e[A\e[A\e[A\e[A${red}$SGDEV changed: ${bold}\nfrom:${SCSISTR#* } \nto: $STR ${norm} \n\n\n"
-        return 1
-      fi
-  else
-      # Ignore disk revision change
-      local old_str_no_rev=
-      local new_str_no_rev=
-
-      old_str_no_rev=${TMPSTR%Rev:*}
-      new_str_no_rev=${STR%Rev:*}
-      if [ "$old_str_no_rev" != "$new_str_no_rev" ]; then
-        echo -e "\e[A\e[A\e[A\e[A${red}$SGDEV changed: ${bold}\nfrom:${SCSISTR#* } \nto: $STR ${norm} \n\n\n"
-        return 1
-      fi
+  procscsiscsi
+  TMPSTR=`echo "$SCSISTR" | grep 'Vendor:'`
+  if [ "$TMPSTR" != "$STR" ]; then
+    echo -e "\e[A\e[A\e[A\e[A${red}$SGDEV changed: ${bold}\nfrom:${SCSISTR#* } \nto: $STR ${norm} \n\n\n"
+    return 1
   fi
-  TMPSTR=$(echo "$SCSISTR" | sed -n 's/.*Type: *\(.*\) *ANSI.*/\1/p' | sed 's/ *$//g')
-  if [ "$TMPSTR" != "$TYPE" ] ; then
+  TMPSTR=`echo "$SCSISTR" | sed -n 's/.*Type: *\(.*\) *ANSI.*/\1/p'`
+  if [ $TMPSTR != $TYPE ] ; then
     echo -e "\e[A\e[A\e[A\e[A${red}$SGDEV changed: ${bold}\nfrom:${TMPSTR} \nto: $TYPE ${norm} \n\n\n"
     return 1
   fi
   return $RC
 }
 
-# Test if SCSI device $host $channel $id $lun exists
+# Test if SCSI device $host $channen $id $lun exists
 # Outputs description from /proc/scsi/scsi (unless arg passed)
 # Returns SCSISTR (empty if no dev)
 testexist ()
 {
   : testexist
   SCSISTR=
-  if procscsiscsi && [ -z "$1" ] ; then
+  if procscsiscsi && test -z "$1"; then
     echo "$SCSISTR" | head -n1
     echo "$SCSISTR" | tail -n2 | pr -o4 -l1
   fi
@@ -368,55 +293,47 @@ chanlist ()
   local tmpchan
 
   for dev in /sys/class/scsi_device/${host}:* ; do
-    [ -d "$dev" ] || continue;
+    [ -d $dev ] || continue;
     hcil=${dev##*/}
     cil=${hcil#*:}
     chan=${cil%%:*}
     for tmpchan in $channelsearch ; do
-      if [ "$chan" -eq "$tmpchan" ] ; then
-        chan=
+      if test "$chan" -eq $tmpchan ; then
+	chan=
       fi
     done
-    if [ -n "$chan" ] ; then
+    if test -n "$chan" ; then
       channelsearch="$channelsearch $chan"
     fi
   done
-  if [ -z "$channelsearch" ] ; then
-    channelsearch="0"
-  fi
+  if test -z "$channelsearch"; then channelsearch="0"; fi
 }
 
 # Returns the list of existing targets per host
 idlist ()
 {
+  local hcil
+  local cil
+  local il
+  local target
   local tmpid
-  local newid
-  local oldid
 
-  oldlist=$(find /sys/class/scsi_device -name "${host}:${channel}:*" -printf "%f\n")
-  # Rescan LUN 0 to check if we found new targets
-  echo "${channel} - -" > "/sys/class/scsi_host/host${host}/scan"
-  newlist=$(find /sys/class/scsi_device -name "${host}:${channel}:*" -printf "%f\n")
-  for newid in $newlist ; do
-    oldid=$newid
-    for tmpid in $oldlist ; do
-      if [ "$newid" = "$tmpid" ] ; then
-        oldid=
-        break
+  for dev in /sys/class/scsi_device/${host}:${channel}:* ; do
+    [ -d $dev ] || continue;
+    hcil=${dev##*/}
+    cil=${hcil#*:}
+    il=${cil#*:}
+    target=${il%%:*}
+    for tmpid in $idsearch ; do
+      if test "$target" -eq $tmpid ; then
+	target=
+	break
       fi
     done
-    if [ -n "$oldid" ] ; then
-      if [ -d /sys/class/scsi_device/$oldid ] ; then
-	hcil=${oldid}
-        printf "\r${green}NEW: %s" "$norm"
-        testexist
-        if [ "$SCSISTR" ] ; then
-          incrfound "$hcil"
-        fi
-      fi
+    if test -n "$target" ; then
+      idsearch="$idsearch $target"
     fi
   done
-  idsearch=$(find /sys/bus/scsi/devices -name "target${host}:${channel}:*" -printf "%f\n" | cut -f 3 -d :)
 }
 
 # Returns the list of existing LUNs from device $host $channel $id $lun
@@ -424,25 +341,19 @@ idlist ()
 getluns()
 {
   sgdevice
-  [ -z "$SGDEV" ] && return 1
-  if [ ! -x /usr/bin/sg_luns ] ; then
-    echo 0
-    return 1
-  fi
-  LLUN=$(sg_luns /dev/$SGDEV 2>/dev/null | sed -n 's/    \(.*\)/\1/p')
-  # Added -z $LLUN condition because $? gets the RC from sed, not sg_luns
-  if [ $? -ne 0 ] || [ -z "$LLUN" ] ; then
-    echo 0
-    return 1
-  fi
+  if test -z "$SGDEV"; then return 1; fi
+  if test ! -x /usr/bin/sg_luns; then echo 0; return 1; fi
+  LLUN=`sg_luns /dev/$SGDEV 2>/dev/null | sed -n 's/    \(.*\)/\1/p'`
+  if test $? != 0; then echo 0; return 1; fi
+  #echo "$LLUN" | sed -n 's/.*lun=\(.*\)/\1/p'
   for lun in $LLUN ; do
       # Swap LUN number
-      l0=0x$lun
-      l1=$(( (l0 >> 48) & 0xffff ))
-      l2=$(( (l0 >> 32) & 0xffff ))
-      l3=$(( (l0 >> 16) & 0xffff ))
-      l4=$(( l0 & 0xffff ))
-      l0=$(( ( ( (l4 * 0xffff) + l3 ) * 0xffff + l2 ) * 0xffff + l1 ))
+      l0=$(printf '%u' 0x$lun)
+      l1=$(( ($l0 >> 48) & 0xffff ))
+      l2=$(( ($l0 >> 32) & 0xffff )) 
+      l3=$(( ($l0 >> 16) & 0xffff ))
+      l4=$(( $l0 & 0xffff ))
+      l0=$(( ( ( ($l4 * 0xffff) + $l3 ) * 0xffff + $l2 ) * 0xffff + $l1 ))
       printf "%u\n" $l0
   done
   return 0
@@ -451,134 +362,92 @@ getluns()
 # Wait for udev to settle (create device nodes etc.)
 udevadm_settle()
 {
-  local tmo=60
-  if [ -x /sbin/udevadm ] ; then
+  if test -x /sbin/udevadm; then 
     print_and_scroll_back " Calling udevadm settle (can take a while) "
-    # Loop for up to 60 seconds if sd devices still are settling..
-    # This allows us to continue if udev events are stuck on multipaths in recovery mode
-    while [ $tmo -gt 0 ] ; do
-      if ! /sbin/udevadm settle --timeout=1 | egrep -q sd[a-z]+ ; then
-        break;
-      fi
-      let tmo=$tmo-1
-    done
+    /sbin/udevadm settle
     white_out
-  elif [ -x /sbin/udevsettle ] ; then
+  elif test -x /sbin/udevsettle; then
     print_and_scroll_back " Calling udevsettle (can take a while) "
     /sbin/udevsettle
     white_out
   else
-    sleep 0.02
+    usleep 20000
   fi
 }
 
 # Perform scan on a single lun $host $channel $id $lun
 dolunscan()
 {
-  local remappedlun0=
-  local devpath
   SCSISTR=
   devnr="$host $channel $id $lun"
   echo -e " Scanning for device $devnr ... "
-  printf "${yellow}OLD: %s" "$norm"
+  printf "${yellow}OLD: $norm"
   testexist
-  # Device exists: Test whether it's still online
-  # (testonline returns 2 if it's gone and 1 if it has changed)
-  devpath="/sys/class/scsi_device/${host}:${channel}:${id}:${lun}/device"
-  if [ "$SCSISTR" ] ; then
-    testonline
-    RC=$?
-    # Well known lun transition case. Only for Direct-Access devs (type 0)
-    # If block directory exists && and PQUAL != 0, we unmapped lun0 and just have a well-known lun
-    # If block directory doesn't exist && PQUAL == 0, we mapped a real lun0
-    if [ "$lun" -eq 0 ] && [ $IPTYPE -eq 0 ] ; then
-      if [ $RC = 2 ] ; then
-        if [ -e "$devpath" ] ; then
-          if [ -d "$devpath/block" ] ; then
-            remappedlun0=2  # Transition from real lun 0 to well-known
-          else
-            RC=0   # Set this so the system leaves the existing well known lun alone. This is a lun 0 with no block directory
-          fi
-        fi
-      elif [ $RC = 0 ] && [ $IPTYPE -eq 0 ] ; then
-        if [ -e "$devpath" ] ; then
-          if [ ! -d "$devpath/block" ] ; then
-            remappedlun0=1  # Transition from well-known to real lun 0
-          fi
-        fi
-      fi
-    fi
-  fi
-
   # Special case: lun 0 just got added (for reportlunscan),
   # so make sure we correctly treat it as new
-  if [ "$lun" = "0" ] && [ "$1" = "1" ] && [ -z "$remappedlun0" ] ; then
+  if test "$lun" = "0" -a "$1"; then
     SCSISTR=""
     printf "\r\e[A\e[A\e[A"
   fi
-
-  : f "$remove" s $SCSISTR
-  if [ "$remove" ] && [ "$SCSISTR" -o "$remappedlun0" = "1" ] ; then
-    if [ $RC != 0 ] || [ ! -z "$forceremove" ] || [ -n "$remappedlun0" ] ; then
-      if [ "$remappedlun0" != "1" ] ; then
-        echo -en "\r\e[A\e[A\e[A${red}REM: "
-        echo "$SCSISTR" | head -n1
-        echo -e "${norm}\e[B\e[B"
-      fi
-      if [ -e "$devpath" ] ; then
-        # have to preemptively do this so we can figure out the mpath device
-        # Don't do this if we're deleting a well known lun to replace it
-        if [ "$remappedlun0" != "1" ] ; then
-          incrrmvd "$host:$channel:$id:$lun"
-        fi
-        echo 1 > "$devpath/delete"
-        sleep 0.02
+  : f $remove s $SCSISTR
+  if test "$remove" -a "$SCSISTR"; then
+    # Device exists: Test whether it's still online
+    # (testonline returns 1 if it's gone or has changed)
+    testonline
+    RC=$?
+    if test $RC != 0 -o ! -z "$forceremove"; then
+      echo -en "\r\e[A\e[A\e[A${red}REM: "
+      echo "$SCSISTR" | head -n1
+      echo -e "${norm}\e[B\e[B"
+      if test -e /sys/class/scsi_device/${host}:${channel}:${id}:${lun}/device; then
+        echo 1 > /sys/class/scsi_device/${host}:${channel}:${id}:${lun}/device/delete
+	# FIXME: Can we skip udevadm settle for removal?
+	#udevadm_settle
+	usleep 20000
       else
         echo "scsi remove-single-device $devnr" > /proc/scsi/scsi
-        if [ $RC -eq 1 ] || [ "$lun" -eq 0 ] ; then
+	if test $RC -eq 1 -o $lun -eq 0 ; then
           # Try readding, should fail if device is gone
           echo "scsi add-single-device $devnr" > /proc/scsi/scsi
-        fi
+	fi
       fi
     fi
-    if [ $RC = 0 ] || [ "$forcerescan" ] ; then
-      if [ -e "$devpath" ] ; then
-        echo 1 > "$devpath/rescan"
+    if test $RC = 0 -o "$forcerescan" ; then
+      if test -e /sys/class/scsi_device/${host}:${channel}:${id}:${lun}/device; then
+        echo 1 > /sys/class/scsi_device/${host}:${channel}:${id}:${lun}/device/rescan
+	udevadm_settle
       fi
     fi
-    printf "\r\e[A\e[A\e[A${yellow}OLD: %s" "$norm"
+    printf "\r\e[A\e[A\e[A${yellow}OLD: $norm"
     testexist
-    if [ -z "$SCSISTR" ] && [ $RC != 1 ] && [ "$remappedlun0" != "1" ] ; then
-      printf "\r${red}DEL: %s\r\n\n" "$norm"
-      # In the event we're replacing with a well known node, we need to let it continue, to create the replacement node
-      [ "$remappedlun0" != "2" ] && return 2
+    if test -z "$SCSISTR"; then
+      printf "\r${red}DEL: $norm\r\n\n"
+      let rmvd+=1;
+      return 1
     fi
   fi
-  if [ -z "$SCSISTR" ] || [ -n "$remappedlun0" ] ; then
-    if [ "$remappedlun0" != "2" ] ; then
-      # Device does not exist, try to add
-      printf "\r${green}NEW: %s" "$norm"
-    fi
-    if [ -e "/sys/class/scsi_host/host${host}/scan" ] ; then
-      echo "$channel $id $lun" > "/sys/class/scsi_host/host${host}/scan" 2> /dev/null
+  if test -z "$SCSISTR"; then
+    # Device does not exist, try to add
+    printf "\r${green}NEW: $norm"
+    if test -e /sys/class/scsi_host/host${host}/scan; then
+      echo "$channel $id $lun" > /sys/class/scsi_host/host${host}/scan 2> /dev/null
+      udevadm_settle
     else
       echo "scsi add-single-device $devnr" > /proc/scsi/scsi
     fi
     testexist
-    if [ -z "$SCSISTR" ] ; then
+    if test -z "$SCSISTR"; then
       # Device not present
       printf "\r\e[A";
-      # Optimization: if lun==0, stop here (only if in non-remove mode)
-      if [ "$lun" = 0 ] && [ -z "$remove" ] && [ "$optscan" = 1 ] ; then
-        return 1;
-      fi
-    else
-      if [ "$remappedlun0" != "2" ] ; then
-        incrfound "$host:$channel:$id:$lun"
-      fi
+      ## COMMENTED OUT as the "break" below is broken.
+      ## Optimization: if lun==0, stop here (only if in non-remove mode)
+      #if test $lun = 0 -a -z "$remove" -a $optscan = 1; then 
+      #  break;
+      #fi
+    else 
+      let found+=1; 
     fi
   fi
-  return 0;
 }
 
 # Perform report lun scan on $host $channel $id using REPORT_LUNS
@@ -589,20 +458,20 @@ doreportlun()
   devnr="$host $channel $id $lun"
   echo -en " Scanning for device $devnr ...\r"
   lun0added=
-  #printf "${yellow}OLD: %s" "$norm"
+  #printf "${yellow}OLD: $norm"
   # Phase one: If LUN0 does not exist, try to add
   testexist -q
-  if [ -z "$SCSISTR" ] ; then
+  if test -z "$SCSISTR"; then
     # Device does not exist, try to add
-    #printf "\r${green}NEW: %s" "$norm"
-    if [ -e "/sys/class/scsi_host/host${host}/scan" ] ; then
-      echo "$channel $id $lun" > "/sys/class/scsi_host/host${host}/scan" 2> /dev/null
+    #printf "\r${green}NEW: $norm"
+    if test -e /sys/class/scsi_host/host${host}/scan; then
+      echo "$channel $id $lun" > /sys/class/scsi_host/host${host}/scan 2> /dev/null
       udevadm_settle
     else
       echo "scsi add-single-device $devnr" > /proc/scsi/scsi
     fi
     testexist -q
-    if [ -n "$SCSISTR" ] ; then
+    if test -n "$SCSISTR"; then
       lun0added=1
       #testonline
     else
@@ -611,34 +480,35 @@ doreportlun()
       # Find alternative LUN to send getluns to
       for dev in /sys/class/scsi_device/${host}:${channel}:${id}:*; do
         [ -d "$dev" ] || continue
-        lun=${dev##*:}
+	lun=${dev##*:}
         break
       done
     fi
   fi
-  targetluns=$(getluns)
+  targetluns=`getluns`
   REPLUNSTAT=$?
   lunremove=
   #echo "getluns reports " $targetluns
-  olddev=$(find /sys/class/scsi_device/ -name "$host:$channel:$id:*" 2>/dev/null | sort -t: -k4 -n)
+  olddev=`find /sys/class/scsi_device/ -name $host:$channel:$id:* 2>/dev/null`
+  oldluns=`echo "$olddev" | awk -F'/' '{print $5}' | awk -F':' '{print $4}'`
   oldtargets="$targetluns"
   # OK -- if we don't have a LUN to send a REPORT_LUNS to, we could
   # fall back to wildcard scanning. Same thing if the device does not
   # support REPORT_LUNS
-  # TODO: We might be better off to ALWAYS use wildcard scanning if
+  # TODO: We might be better off to ALWAYS use wildcard scanning if 
   # it works
-  if [ "$REPLUNSTAT" = "1" ] ; then
-    if [ -e "/sys/class/scsi_host/host${host}/scan" ] ; then
-      echo "$channel $id -" > "/sys/class/scsi_host/host${host}/scan" 2> /dev/null
+  if test "$REPLUNSTAT" = "1"; then
+    if test -e /sys/class/scsi_host/host${host}/scan; then
+      echo "$channel $id -" > /sys/class/scsi_host/host${host}/scan 2> /dev/null
       udevadm_settle
     else
       echo "scsi add-single-device $host $channel $id $SCAN_WILD_CARD" > /proc/scsi/scsi
     fi
-    targetluns=$(find /sys/class/scsi_device/ -name "$host:$channel:$id:*" -printf "%f\n" | cut -d : -f 4)
-    let found+=$(echo "$targetluns" | wc -l)
-    let found-=$(echo "$olddev" | wc -l)
+    targetluns=`find /sys/class/scsi_device/ -name $host:$channel:$id:* 2>/dev/null | awk -F'/' '{print $5}' | awk -F':' '{print $4}' | sort -n`
+    let found+=`echo "$targetluns" | wc -l`
+    let found-=`echo "$olddev" | wc -l`
   fi
-  [ -z "$targetluns" ] && targetluns="$oldtargets"
+  if test -z "$targetluns"; then targetluns="$oldtargets"; fi
   # Check existing luns
   for dev in $olddev; do
     [ -d "$dev" ] || continue
@@ -647,687 +517,216 @@ doreportlun()
     inlist=
     # OK, is existing $lun (still) in reported list
     for tmplun in $targetluns; do
-      if [ "$tmplun" = "$lun" ] ; then
-        inlist=1
-        dolunscan $lun0added
-        [ $? -eq 1 ] && break
+      if test $tmplun -eq $lun ; then
+	inlist=1
+	dolunscan $lun0added
       else
-        newsearch="$newsearch $tmplun"
+	newsearch="$newsearch $tmplun"
       fi
     done
-    # OK, we have now done a lunscan on $lun and
+    # OK, we have now done a lunscan on $lun and 
     # $newsearch is the old $targetluns without $lun
     if [ -z "$inlist" ]; then
       # Stale lun
       lunremove="$lunremove $lun"
     fi
-    # $lun removed from $lunsearch
-    targetluns=${newsearch# }
+    # $lun removed from $lunsearch (echo for whitespace cleanup)
+    targetluns=`echo $newsearch`
   done
   # Add new ones and check stale ones
   for lun in $targetluns $lunremove; do
     dolunscan $lun0added
-    [ $? -eq 1 ] && break
   done
 }
 
 # Perform search (scan $host)
 dosearch ()
 {
-  if [ -z "$channelsearch" ] ; then
+  if test -z "$channelsearch" ; then
     chanlist
   fi
   for channel in $channelsearch; do
-    if [ -z "$idsearch" ] ; then
-      if [ -z "$lunsearch" ] ; then
-	idlist
-      else
-	idsearch=$(find /sys/bus/scsi/devices -name "target${host}:${channel}:*" -printf "%f\n" | cut -f 3 -d :)
-      fi
+    if test -z "$idsearch" ; then
+      idlist
     fi
     for id in $idsearch; do
-      if [ -z "$lunsearch" ] ; then
-        doreportlun
+      if test -z "$lunsearch" ; then
+	doreportlun
       else
-        for lun in $lunsearch; do
+	for lun in $lunsearch; do
           dolunscan
-          [ $? -eq 1 ] && break
         done
       fi
     done
   done
 }
-
+ 
 expandlist ()
 {
   list=$1
   result=""
   first=${list%%,*}
   rest=${list#*,}
-  while [ ! -z "$first" ] ; do
+  while test ! -z "$first"; do 
     beg=${first%%-*};
-    if [ "$beg" = "$first" ] ; then
+    if test "$beg" = "$first"; then
       result="$result $beg";
     else
       end=${first#*-}
-      result="$result $(seq $beg $end)"
+      result="$result `seq $beg $end`"
     fi
-    [ "$rest" = "$first" ] && rest=""
+    test "$rest" = "$first" && rest=""
     first=${rest%%,*}
     rest=${rest#*,}
   done
-  echo "$result"
-}
-
-searchexisting()
-{
-  local tmpch;
-  local tmpid
-  local match=0
-  local targets=
-
-  targets=$(find /sys/bus/scsi/devices -name "target${host}:*" -printf "%f\n" | cut -d : -f 2-3)
-  # Nothing came back on this host, so we should skip it
-  [ -z "$targets" ] && return
-
-  local target=;
-  for target in $targets ; do
-    channel=${target%:*}
-    id=${target#*:}
-    if [ -n "$channelsearch" ] ; then
-      for tmpch in $channelsearch ; do
-        [ $tmpch -eq "$channel" ] && match=1
-      done
-    else
-      match=1
-    fi
-
-    [ $match -eq 0 ] && continue
-    match=0
-
-    if [ "$filter_ids" -eq 1 ] ; then
-      for tmpid in $idsearch ; do
-        if [ "$tmpid" = "$id" ] ; then
-          match=1
-        fi
-      done
-    else
-      match=1
-    fi
-
-    [ $match -eq 0 ] && continue
-
-    if [ -z "$lunsearch" ] ; then
-      doreportlun
-    else
-      for lun in $lunsearch ; do
-        dolunscan
-        [ $? -eq 1 ] && break
-      done
-    fi
-  done
-}
-
-# Go through all of the existing devices and figure out any that have been remapped
-findremapped()
-{
-  local hctl=;
-  local devs=
-  local sddev=
-  local id_serial=
-  local id_serial_old=
-  local remapped=
-  mpaths=""
-  local tmpfile=
-
-  tmpfile=$(mktemp /tmp/rescan-scsi-bus.XXXXXXXX 2> /dev/null)
-  if [ -z "$tmpfile" ] ; then
-    tmpfile="/tmp/rescan-scsi-bus.$$"
-    rm -f $tmpfile
-  fi
-
-  # Get all of the ID_SERIAL attributes, after finding their sd node
-  devs=$(ls /sys/class/scsi_device/)
-  for hctl in $devs ; do
-    if [ -d "/sys/class/scsi_device/$hctl/device/block" ] ; then
-      sddev=$(ls "/sys/class/scsi_device/$hctl/device/block")
-      id_serial_old=$(udevadm info -q all -n "$sddev" | grep "ID_SERIAL=" | cut -d"=" -f2)
-      [ -z "$id_serial_old" ] && id_serial_old="none"
-      echo "$hctl $sddev $id_serial_old" >> $tmpfile
-    fi
-  done
-
-  # Trigger udev to update the info
-  echo -n "Triggering udev to update device information... "
-  /sbin/udevadm trigger
-  udevadm_settle 2>&1 /dev/null
-  echo "Done"
-
-  # See what changed and reload the respective multipath device if applicable
-  while read -r hctl sddev id_serial_old ; do
-    remapped=0
-    id_serial=$(udevadm info -q all -n "$sddev" | grep "ID_SERIAL=" | cut -d"=" -f2)
-    [ -z "$id_serial" ] && id_serial="none"
-    if [ "$id_serial_old" != "$id_serial" ] ; then
-      remapped=1
-    fi
-    # If udev events updated the disks already, but the multipath device isn't update
-    # check for old devices to make sure we found remapped luns
-    if [ -n "$mp_enable" ] && [ $remapped -eq 0 ]; then
-      findmultipath "$sddev" $id_serial
-      if [ $? -eq 1 ] ; then
-        remapped=1
-      fi
-    fi
-
-    # if uuid is 1, it's unmapped, so we don't want to treat it as a remap
-    # if remapped flag is 0, just skip the rest of the logic
-    if [ "$id_serial" = "1" ] || [ $remapped -eq 0 ] ; then
-      continue
-    fi
-    printf "${yellow}REMAPPED: %s" "$norm"
-    host=$(echo "$hctl" | cut -d":" -f1)
-    channel=$(echo "$hctl" | cut -d":" -f2)
-    id=$(echo "$hctl" | cut -d":" -f3)
-    lun=$(echo "$hctl" | cut -d":" -f4)
-    procscsiscsi
-    echo "$SCSISTR"
-    incrchgd "$hctl"
-  done < $tmpfile
-  rm -f $tmpfile
-
-  if [ -n "$mp_enable" ] && [ -n "$mpaths" ] ; then
-    echo "Updating multipath device mappings"
-    flushmpaths
-    $MULTIPATH | grep "create:" 2> /dev/null
-  fi
-}
-
-incrfound()
-{
-  local hctl="$1"
-  if [ -n "$hctl" ] ; then
-    let found+=1
-    FOUNDDEVS="$FOUNDDEVS\t[$hctl]\n"
-  else
-    return
-  fi
-}
-
-incrchgd()
-{
-  local hctl="$1"
-  if [ -n "$hctl" ] ; then
-    if ! echo "$CHGDEVS" | grep -q "\[$hctl\]"; then
-      let updated+=1
-      CHGDEVS="$CHGDEVS\t[$hctl]\n"
-    fi
-  else
-    return
-  fi
-
-  if [ -n "$mp_enable" ] ; then
-    local sdev
-
-    sdev=$(findsddev "$hctl")
-    if [ -n "$sdev" ] ; then
-      findmultipath "$sdev"
-    fi
-  fi
-}
-
-incrrmvd()
-{
-  local hctl="$1"
-  if [ -n "$hctl" ] ; then
-    let rmvd+=1;
-    RMVDDEVS="$RMVDDEVS\t[$hctl]\n"
-  else
-    return
-  fi
-
-  if [ -n "$mp_enable" ] ; then
-    local sdev
-
-    sdev=$(findsddev "$hctl")
-    if [ -n "$sdev" ] ; then
-      findmultipath "$sdev"
-    fi
-  fi
-}
-
-findsddev()
-{
-  local hctl="$1"
-  local sddev=
-  local blkpath
-
-  blkpath="/sys/class/scsi_device/$hctl/device/block"
-  if [ -e "$blkpath" ] ; then
-    sddev=$(ls "$blkpath")
-    echo "$sddev"
-  fi
-}
-
-addmpathtolist()
-{
-  local mp="$1"
-  local mp2=
-
-  for mp2 in $mpaths ; do
-    # The multipath device is already in the list
-    if [ "$mp2" = "$mp" ] ; then
-      return
-    fi
-  done
-  mpaths="$mpaths $mp"
-}
-
-findmultipath()
-{
-  local dev="$1"
-  local find_mismatch="$2"
-  local mp=
-  local mp2=
-  local found_dup=0
-  local maj_min=
-
-  # Need a sdev, and executable multipath and dmsetup command here
-  if [ -z "$dev" ] || [ ! -x "$DMSETUP" ] || [ ! -x "$MULTIPATH" ] ; then
-    return 1
-  fi
-
-  maj_min=$(cat "/sys/block/$dev/dev")
-  for mp in $($DMSETUP ls --target=multipath | cut -f 1) ; do
-    [ "$mp" = "No" ] && break;
-    if "$DMSETUP" status "$mp" | grep -q " $maj_min "; then
-      # With two arguments, look up current uuid from sysfs
-      # if it doesn't match what was passed, this multipath
-      # device is not updated, so this is a remapped LUN
-      if [ -n "$find_mismatch" ] ; then
-        mp2=$($MULTIPATH -l "$mp" | egrep -o "dm-[0-9]+")
-        mp2=$(cut -f2 -d- "/sys/block/$mp2/dm/uuid")
-        if [ "$find_mismatch" != "$mp2" ] ; then
-          addmpathtolist "$mp"
-          found_dup=1
-        fi
-        continue
-      fi
-      # Normal mode: Find the first multipath with the sdev
-      # and add it to the list
-      addmpathtolist "$mp"
-      return
-    fi
-  done
-
-  # Return 1 to signal that a duplicate was found to the calling function
-  if [ $found_dup -eq 1 ] ; then
-    return 1
-  else
-    return 0
-  fi
+  echo $result
 }
 
-reloadmpaths()
-{
-  local mpath
-  if [ ! -x "$MULTIPATH" ] ; then
-    echo "no -x multipath"
-    return
-  fi
-
-  # Pass 1 as the argument to reload all mpaths
-  if [ "$1" = "1" ] ; then
-    echo "Reloading all multipath devices"
-    $MULTIPATH -r > /dev/null 2>&1
-    return
-  fi
-
-  # Reload the multipath devices
-  for mpath in $mpaths ; do
-    echo -n "Reloading multipath device $mpath... "
-    if $MULTIPATH -r "$mpath" > /dev/null 2>&1 ; then
-      echo "Done"
-    else
-      echo "Fail"
-    fi
-  done
-}
-
-resizempaths()
-{
-  local mpath
-
-  for mpath in $mpaths ; do
-    echo -n "Resizing multipath map $mpath ..."
-    multipathd -k"resize map $mpath"
-    let updated+=1
-  done
-}
-
-flushmpaths()
-{
-  local mpath
-  local remove=""
-  local i
-  local flush_retries=5
-
-  if [ -n "$1" ] ; then
-    for mpath in $($DMSETUP ls --target=multipath | cut -f 1) ; do
-      [ "$mpath" = "No" ] && break
-      num=$($DMSETUP status "$mpath" | awk 'BEGIN{RS=" ";active=0}/[0-9]+:[0-9]+/{dev=1}/A/{if (dev == 1) active++; dev=0} END{ print active }')
-      if [ "$num" -eq 0 ] ; then
-        remove="$remove $mpath"
-      fi
-    done
-  else
-    remove="$mpaths"
-  fi
-
-  for mpath in $remove ; do
-    i=0
-    echo -n "Flushing multipath device $mpath... "
-    while [ $i -lt $flush_retries ] ; do
-      $DMSETUP message "$mpath" 0 fail_if_no_path > /dev/null 2>&1
-      if $MULTIPATH -f "$mpath" > /dev/null 2>&1 ; then
-        echo "Done ($i retries)"
-        break
-      elif [ $i -eq $flush_retries ] ; then
-        echo "Fail"
-      fi
-      sleep 0.02
-      let i=$i+1
-    done
-  done
-}
-
-
-# Find resized luns
-findresized()
-{
-  local devs=
-  local size=
-  local new_size=
-  local sysfs_path=
-  local sddev=
-  local i=
-  local m=
-  local mpathsize=
-  declare -a mpathsizes
-
-  if [ -z "$lunsearch" ] ; then
-    devs=$(ls /sys/class/scsi_device/)
-  else
-    for lun in $lunsearch ; do
-      devs="$devs $(cd /sys/class/scsi_device/ && ls -d *:${lun})"
-    done
-  fi
-
-  for hctl in $devs ; do
-    sysfs_path="/sys/class/scsi_device/$hctl/device"
-    if [ -d "$sysfs_path/block" ] ; then
-      sddev=$(ls "$sysfs_path/block")
-      size=$(cat "$sysfs_path/block/$sddev/size")
-
-      echo 1 > "$sysfs_path/rescan"
-      new_size=$(cat "$sysfs_path/block/$sddev/size")
-
-      if [ "$size" != "$new_size" ] && [ "$size" != "0" ] && [ "$new_size" != "0" ] ; then
-        printf "${yellow}RESIZED: %s" "$norm"
-        host=$(echo "$hctl" | cut -d":" -f1)
-        channel=$(echo "$hctl" | cut -d":" -f2)
-        id=$(echo "$hctl" | cut -d":" -f3)
-        lun=$(echo "$hctl" | cut -d":" -f4)
-
-        procscsiscsi
-        echo "$SCSISTR"
-        incrchgd "$hctl"
-      fi
-    fi
-  done
-
-  if [ -n "$mp_enable" ] && [ -n "$mpaths" ] ; then
-    i=0
-    for m in $mpaths ; do
-      mpathsizes[$i]="$($MULTIPATH -l "$m" | egrep -o [0-9]+.[0-9]+[KMGT])"
-      let i=$i+1
-    done
-    resizempaths
-    i=0
-    for m in $mpaths ; do
-      mpathsize="$($MULTIPATH -l "$m" | egrep -o [0-9\.]+[KMGT])"
-      echo "$m ${mpathsizes[$i]} => $mpathsize"
-      let i=$i+1
-    done
-  fi
-}
-
-FOUNDDEVS=""
-CHGDEVS=""
-RMVDDEVS=""
-
 # main
-if [ "@$1" = @--help ] || [ "@$1" = @-h ] || [ "@$1" = "@-?" ] ; then
+if test @$1 = @--help -o @$1 = @-h -o @$1 = @-?; then
     echo "Usage: rescan-scsi-bus.sh [options] [host [host ...]]"
     echo "Options:"
-    echo " -a      scan all targets, not just currently existing [default: disabled]"
-    echo " -c      enables scanning of channels 0 1   [default: 0 / all detected ones]"
-    echo " -d      enable debug                       [default: 0]"
-    echo " -f      flush failed multipath devices     [default: disabled]"
-    echo " -h      help: print this usage message then exit"
-    echo " -i      issue a FibreChannel LIP reset     [default: disabled]"
-    echo " -I SECS issue a FibreChannel LIP reset and wait for SECS seconds [default: disabled]"
     echo " -l      activates scanning for LUNs 0--7   [default: 0]"
     echo " -L NUM  activates scanning for LUNs 0--NUM [default: 0]"
-    echo " -m      update multipath devices           [default: disabled]"
-    echo " -r      enables removing of devices        [default: disabled]"
-    echo " -s      look for resized disks and reload associated multipath devices, if applicable"
-    echo " -u      look for existing disks that have been remapped"
-    echo " -V      print version date then exit"
     echo " -w      scan for target device IDs 0--15   [default: 0--7]"
-    echo "--alltargets:    same as -a"
-    echo "--attachpq3:     Tell kernel to attach sg to LUN 0 that reports PQ=3"
-    echo "--channels=LIST: Scan only channel(s) in LIST"
+    echo " -c      enables scanning of channels 0 1   [default: 0 / all detected ones]"
+    echo " -r      enables removing of devices        [default: disabled]"
+    echo " -i      issue a FibreChannel LIP reset     [default: disabled]"
+    echo "--remove:        same as -r"
+    echo "--issue-lip:     same as -i"
+    echo "--forcerescan:   Rescan existing devices"
+    echo "--forceremove:   Remove and readd every device (DANGEROUS)"
+    echo "--nooptscan:     don't stop looking for LUNs is 0 is not found"
     echo "--color:         use coloured prefixes OLD/NEW/DEL"
-    echo "--flush:         same as -f"
-    echo "--forceremove:   Remove stale devices (DANGEROUS)"
-    echo "--forcerescan:   Remove and readd existing devices (DANGEROUS)"
-    echo "--help:          print this usage message then exit"
     echo "--hosts=LIST:    Scan only host(s) in LIST"
+    echo "--channels=LIST: Scan only channel(s) in LIST"
     echo "--ids=LIST:      Scan only target ID(s) in LIST"
-    echo "--ignore-rev:    Ignore the revision change"
-    echo "--issue-lip:     same as -i"
-    echo "--issue-lip-wait=SECS:     same as -I"
-    echo "--largelun:      Tell kernel to support LUNs > 7 even on SCSI2 devs"
-    echo "--luns=LIST:     Scan only lun(s) in LIST"
-    echo "--multipath:     same as -m"
-    echo "--nooptscan:     don't stop looking for LUNs if 0 is not found"
-    echo "--remove:        same as -r"
+    echo "--luns=LIST:     Scan only lun(s) in LIST"  
+    echo "--sync/nosync:   Issue a sync / no sync [default: sync if remove]"
+    echo "--attachpq3:     Tell kernel to attach sg to LUN 0 that reports PQ=3"
     echo "--reportlun2:    Tell kernel to try REPORT_LUN even on SCSI2 devices"
-    echo "--resize:        same as -s"
+    echo "--largelun:      Tell kernel to support LUNs > 7 even on SCSI2 devs"
     echo "--sparselun:     Tell kernel to support sparse LUN numbering"
-    echo "--sync/nosync:   Issue a sync / no sync [default: sync if remove]"
-    echo "--update:        same as -u"
-    echo "--version:       same as -V"
-    echo "--wide:          same as -w"
-    echo ""
-    echo "Host numbers may thus be specified either directly on cmd line (deprecated)"
-    echo "or with the --hosts=LIST parameter (recommended)."
+    echo " Host numbers may thus be specified either directly on cmd line (deprecated) or"
+    echo " or with the --hosts=LIST parameter (recommended)."
     echo "LIST: A[-B][,C[-D]]... is a comma separated list of single values and ranges"
-    echo "(No spaces allowed.)"
-    exit 0
-fi
-
-if [ "@$1" = @--version ] || [ "@$1" = @-V ] ; then
-    echo ${VERSION}
+    echo " (No spaces allowed.)"
     exit 0
 fi
 
-if [ ! -d /sys/class/scsi_host/ ] && [ ! -d /proc/scsi/ ] ; then
+if test ! -d /sys/class/scsi_host/ -a ! -d /proc/scsi/; then
   echo "Error: SCSI subsystem not active"
   exit 1
-fi
+fi	
 
 # Make sure sg is there
 modprobe sg >/dev/null 2>&1
 
-if [ -x /usr/bin/sg_inq ] ; then
-  sg_version=$(sg_inq -V 2>&1 | cut -d " " -f 3)
-  if [ -n "$sg_version" ] ; then
-    sg_ver_maj=${sg_version:0:1}
-    sg_version=${sg_version##?.}
-    let sg_version+=$((100 * sg_ver_maj))
-  fi
-  sg_version=${sg_version##0.}
-  #echo "\"$sg_version\""
-  if [ -z "$sg_version" ] || [ "$sg_version" -lt 70 ] ; then
-    sg_len_arg="-36"
-  else
-    sg_len_arg="--len=36"
-  fi
-else
-  echo "WARN: /usr/bin/sg_inq not present -- please install sg3_utils"
-  echo " or rescan-scsi-bus.sh might not fully work."
-fi
+if test -x /usr/bin/sg_inq; then
+    sg_version=$(sg_inq -V 2>&1 | cut -d " " -f 3)
+    sg_version=${sg_version##0.}
+    #echo "\"$sg_version\""
+    #if [ -z "$sg_version" -o "$sg_version" -lt 70 ] ; then
+        #sg_len_arg="-36"
+    #else
+        sg_len_arg="--len=36"
+    #fi
+#else
+#    # Slackware note: it may not "fully work", but it works well enough for
+#    # what we need here in the installer. If that turns out not to be the
+#    # case, let volkerdi know on the Slackware Linux Questions forum.
+#    echo "WARN: /usr/bin/sg_inq not present -- please install sg3_utils"
+#    echo " or rescan-scsi-bus.sh might not fully work."     
+fi    
 
 # defaults
 unsetcolor
-debug=0
 lunsearch=
-opt_idsearch=$(seq 0 7)
-filter_ids=0
+opt_idsearch=`seq 0 7`
 opt_channelsearch=
 remove=
-updated=0
-update=0
-resize=0
 forceremove=
 optscan=1
 sync=1
-existing_targets=1
-mp_enable=
-lipreset=-1
 declare -i scan_flags=0
-ignore_rev=0
+if test -d /sys/class/scsi_host; then 
+  findhosts_26
+else  
+  findhosts
+fi  
 
 # Scan options
 opt="$1"
-while [ ! -z "$opt" ] && [ -z "${opt##-*}" ] ; do
+while test ! -z "$opt" -a -z "${opt##-*}"; do
   opt=${opt#-}
   case "$opt" in
-    a) existing_targets=;;  #Scan ALL targets when specified
+    l) lunsearch=`seq 0 7` ;;
+    L) lunsearch=`seq 0 $2`; shift ;;
+    w) opt_idsearch=`seq 0 15` ;;
     c) opt_channelsearch="0 1" ;;
-    d) debug=1 ;;
-    f) flush=1 ;;
-    i) lipreset=0 ;;
-    I) shift; lipreset=$opt ;;
-    l) lunsearch=$(seq 0 7) ;;
-    L) lunsearch=$(seq 0 "$2"); shift ;;
-    m) mp_enable=1 ;;
     r) remove=1 ;;
-    s) resize=1; mp_enable=1 ;;
-    u) update=1 ;;
-    w) opt_idsearch=$(seq 0 15) ;;
-    -alltargets)  existing_targets=;;
-    -attachpq3) scan_flags=$((scan_flags|0x1000000)) ;;
-    -channels=*)  arg=${opt#-channels=};opt_channelsearch=$(expandlist "$arg") ;;
-    -color) setcolor ;;
-    -flush)       flush=1 ;;
-    -forceremove) remove=1; forceremove=1 ;;
+    i) lipreset=1 ;;
+    -remove)      remove=1 ;;
     -forcerescan) remove=1; forcerescan=1 ;;
-    -hosts=*)     arg=${opt#-hosts=};   hosts=$(expandlist "$arg") ;;
-    -ids=*)   arg=${opt#-ids=};         opt_idsearch=$(expandlist "$arg") ; filter_ids=1;;
-    -ignore-rev) ignore_rev=1;;
-    -issue-lip) lipreset=0 ;;
-    -issue-lip-wait) lipreset=${opt#-issue-lip-wait=};;
-    -largelun) scan_flags=$((scan_flags|0x200)) ;;
-    -luns=*)  arg=${opt#-luns=};        lunsearch=$(expandlist "$arg") ;;
-    -multipath) mp_enable=1 ;;
+    -forceremove) remove=1; forceremove=1 ;;
+    -hosts=*)     arg=${opt#-hosts=};   hosts=`expandlist $arg` ;;
+    -channels=*)  arg=${opt#-channels=};opt_channelsearch=`expandlist $arg` ;; 
+    -ids=*)   arg=${opt#-ids=};         opt_idsearch=`expandlist $arg` ;; 
+    -luns=*)  arg=${opt#-luns=};        lunsearch=`expandlist $arg` ;; 
+    -color) setcolor ;;
     -nooptscan) optscan=0 ;;
+    -issue-lip) lipreset=1 ;;
+    -sync) sync=2 ;;
     -nosync) sync=0 ;;
-    -remove)      remove=1 ;;
-    -reportlun2) scan_flags=$((scan_flags|0x20000)) ;;
-    -resize) resize=1;;
+    -attachpq3) scan_flags=$(($scan_flags|0x1000000)) ;;
+    -reportlun2) scan_flags=$(($scan_flags|0x20000)) ;;
+    -largelun) scan_flags=$(($scan_flags|0x200)) ;;
     -sparselun) scan_flags=$((scan_flags|0x40)) ;;
-    -sync) sync=2 ;;
-    -update) update=1;;
-    -wide) opt_idsearch=$(seq 0 15) ;;
     *) echo "Unknown option -$opt !" ;;
   esac
   shift
   opt="$1"
-done
+done    
 
-if [ -z "$hosts" ] ; then
-  if [ -d /sys/class/scsi_host ] ; then
-    findhosts_26
-  else
-    findhosts
-  fi
+# Hosts given ?
+if test "@$1" != "@"; then 
+  hosts=$*
 fi
 
-if [ -d /sys/class/scsi_host ] && [ ! -w /sys/class/scsi_host ]; then
+if [ -d /sys/class/scsi_host -a ! -w /sys/class/scsi_host ]; then
   echo "You need to run scsi-rescan-bus.sh as root"
   exit 2
-fi
-[ "$sync" = 1 ] && [ "$remove" = 1 ] && sync=2
-if [ "$sync" = 2 ] ; then
-  echo "Syncing file systems"
-  sync
-fi
-if [ -w /sys/module/scsi_mod/parameters/default_dev_flags ] && [ $scan_flags != 0 ] ; then
-  OLD_SCANFLAGS=$(cat /sys/module/scsi_mod/parameters/default_dev_flags)
-  NEW_SCANFLAGS=$((OLD_SCANFLAGS|scan_flags))
-  if [ "$OLD_SCANFLAGS" != "$NEW_SCANFLAGS" ] ; then
+fi  
+if test "$sync" = 1 -a "$remove" = 1; then sync=2; fi
+if test "$sync" = 2; then echo "Syncing file systems"; sync; fi
+if test -w /sys/module/scsi_mod/parameters/default_dev_flags -a $scan_flags != 0; then
+  OLD_SCANFLAGS=`cat /sys/module/scsi_mod/parameters/default_dev_flags`
+  NEW_SCANFLAGS=$(($OLD_SCANFLAGS|$scan_flags))
+  if test "$OLD_SCANFLAGS" != "$NEW_SCANFLAGS"; then
     echo -n "Temporarily setting kernel scanning flags from "
-    printf "0x%08x to 0x%08x\n" "$OLD_SCANFLAGS" "$NEW_SCANFLAGS"
+    printf "0x%08x to 0x%08x\n" $OLD_SCANFLAGS $NEW_SCANFLAGS
     echo $NEW_SCANFLAGS > /sys/module/scsi_mod/parameters/default_dev_flags
   else
     unset OLD_SCANFLAGS
   fi
-fi
-DMSETUP=$(which dmsetup)
-[ -z "$DMSETUP" ] && flush= && mp_enable=
-MULTIPATH=$(which multipath 2> /dev/null)
-[ -z "$MULTIPATH" ] && flush= && mp_enable=
-
-echo -n "Scanning SCSI subsystem for new devices"
-[ -z "$flush" ] || echo -n ", flush failed multipath devices,"
-[ -z "$remove" ] || echo -n " and remove devices that have disappeared"
-echo
+fi  
+echo "Scanning SCSI subsystem for new devices"
+test -z "$remove" || echo " and remove devices that have disappeared"
 declare -i found=0
-declare -i updated=0
 declare -i rmvd=0
-
-if [ -n "$flush" ] ; then
-  if [ -x "$MULTIPATH" ] ; then
-    flushmpaths 1
-  fi
-fi
-
-# Update existing mappings
-if [ $update -eq 1 ] ; then
-  echo "Searching for remapped LUNs"
-  findremapped
-  # If you've changed the mapping, there's a chance it's a different size
-  mpaths=""
-  findresized
-# Search for resized LUNs
-elif [ $resize -eq 1 ] ; then
-  echo "Searching for resized LUNs"
-  findresized
-# Normal rescan mode
-else
-  for host in $hosts; do
+for host in $hosts; do
   echo -n "Scanning host $host "
-  if [ -e "/sys/class/fc_host/host$host" ] ; then
+  if test -e /sys/class/fc_host/host$host ; then
     # It's pointless to do a target scan on FC
-    issue_lip=/sys/class/fc_host/host$host/issue_lip
-    if [ -e "$issue_lip" ] && [ "$lipreset" -ge 0 ] ; then
-      echo 1 > "$issue_lip" 2> /dev/null;
+    if test -n "$lipreset" ; then
+      echo 1 > /sys/class/fc_host/host$host/issue_lip 2> /dev/null;
       udevadm_settle
-      [ "$lipreset" -gt 0 ] && sleep "$lipreset"
     fi
+    # We used to always trigger a rescan for FC to update channels and targets
+    # Commented out -- as discussed with Hannes we should rely
+    # on the main loop doing the scan, no need to do it here.
+    #echo "- - -" > /sys/class/scsi_host/host$host/scan 2> /dev/null;
+    #udevadm_settle
     channelsearch=
     idsearch=
   else
@@ -1337,57 +736,22 @@ else
   [ -n "$channelsearch" ] && echo -n "channels $channelsearch "
   echo -n "for "
   if [ -n "$idsearch" ] ; then
-    echo -n " SCSI target IDs $idsearch" | tr '\n' ' '
+    echo -n " SCSI target IDs " $idsearch
   else
     echo -n " all SCSI target IDs"
   fi
   if [ -n "$lunsearch" ] ; then
-    echo ", LUNs $lunsearch"
+    echo ", LUNs " $lunsearch
   else
     echo ", all LUNs"
   fi
-
-  if [ -n "$existing_targets" ] ; then
-    searchexisting
-  else
-    dosearch
-  fi
-  done
-  if [ -n "$OLD_SCANFLAGS" ] ; then
-    echo "$OLD_SCANFLAGS" > /sys/module/scsi_mod/parameters/default_dev_flags
-  fi
-fi
-
-let rmvd_found=$rmvd+$found
-if [ -n "$mp_enable" ] && [ $rmvd_found -gt 0 ] ; then
-  echo "Attempting to update multipath devices..."
-  if [ $rmvd -gt 0 ] ; then
-    udevadm_settle
-    echo "Removing multipath mappings for removed devices if all paths are now failed... "
-    flushmpaths 1
-  fi
-  if [ $found -gt 0 ] ; then
-    /sbin/udevadm trigger --sysname-match=sd*
-    udevadm_settle
-    if [ -x "$MULTIPATH" ] ; then
-      echo "Trying to discover new multipath mappings for newly discovered devices... "
-      $MULTIPATH | grep "create:" 2> /dev/null
-    fi
-  fi
-fi
-
-echo "$found new or changed device(s) found.          "
-if [ ! -z "$FOUNDDEVS" ] ; then
-  printf "%s" "$FOUNDDEVS"
-fi
-echo "$updated remapped or resized device(s) found."
-if [ ! -z "$CHGDEVS" ] ; then
-  printf "%s" "$CHGDEVS"
+  dosearch
+done
+if test -n "$OLD_SCANFLAGS"; then
+  echo $OLD_SCANFLAGS > /sys/module/scsi_mod/parameters/default_dev_flags
 fi
+echo "$found new device(s) found.               "
 echo "$rmvd device(s) removed.                 "
-if [ ! -z "$RMVDDEVS" ] ; then
-  printf "%s" "$RMVDDEVS"
-fi
 
 # Local Variables:
 # sh-basic-offset: 2
diff --git a/source/l/libimobiledevice-glue/libimobiledevice-glue.SlackBuild b/source/l/libimobiledevice-glue/libimobiledevice-glue.SlackBuild
index 6f8a9967..2ee69caf 100755
--- a/source/l/libimobiledevice-glue/libimobiledevice-glue.SlackBuild
+++ b/source/l/libimobiledevice-glue/libimobiledevice-glue.SlackBuild
@@ -24,7 +24,7 @@ cd $(dirname $0) ; CWD=$(pwd)
 
 PKGNAM=libimobiledevice-glue
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-1}
+BUILD=${BUILD:-2}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
@@ -101,11 +101,6 @@ make install DESTDIR=$PKG || exit 1
 # Don't ship .la files:
 rm -f $PKG/{,usr/}lib${LIBDIRSUFFIX}/*.la
 
-# Provide a symlink from the old pkgconfig name:
-( cd $PKG/usr/lib${LIBDIRSUFFIX}/pkgconfig
-  ln -sf libimobiledevice-1.*.pc libimobiledevice.pc
-)
-
 # Strip binaries:
 find $PKG | xargs file | grep -e "executable" -e "shared object" \
   | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
diff --git a/source/l/libimobiledevice/libimobiledevice.SlackBuild b/source/l/libimobiledevice/libimobiledevice.SlackBuild
index c8d0e373..e48aff64 100755
--- a/source/l/libimobiledevice/libimobiledevice.SlackBuild
+++ b/source/l/libimobiledevice/libimobiledevice.SlackBuild
@@ -1,6 +1,6 @@
 #!/bin/bash
 
-# Copyright 2015, 2017, 2018  Patrick J. Volkerding, Sebeka, MN, USA
+# Copyright 2015, 2017, 2018, 2022  Patrick J. Volkerding, Sebeka, MN, USA
 # All rights reserved.
 #
 # Redistribution and use of this script, with or without modification, is
@@ -24,7 +24,7 @@ cd $(dirname $0) ; CWD=$(pwd)
 
 PKGNAM=libimobiledevice
 VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-1}
+BUILD=${BUILD:-2}
 
 # Automatically determine the architecture we're building on:
 if [ -z "$ARCH" ]; then
@@ -101,10 +101,13 @@ make install DESTDIR=$PKG || exit 1
 # Don't ship .la files:
 rm -f $PKG/{,usr/}lib${LIBDIRSUFFIX}/*.la
 
-# Provide a symlink from the old pkgconfig name:
-( cd $PKG/usr/lib${LIBDIRSUFFIX}/pkgconfig
-  ln -sf libimobiledevice-1.*.pc libimobiledevice.pc
-)
+## COMMENTED OUT - I doubt this is needed any more.
+## Provide a symlink from the old pkgconfig name:
+#if [ -r $PKG/usr/lib${LIBDIRSUFFIX}/pkgconfig/libimobiledevice-1.0.pc -a ! -r $PKG/usr/lib${LIBDIRSUFFIX}/pkgconfig/libimobiledevice.pc ]; then
+#  ( cd $PKG/usr/lib${LIBDIRSUFFIX}/pkgconfig
+#    ln -sf libimobiledevice-1.0.pc libimobiledevice.pc
+#  )
+#fi
 
 # Strip binaries:
 find $PKG | xargs file | grep -e "executable" -e "shared object" \