diff options
Diffstat (limited to 'extra/source/recordmydesktop/recordmydesktop.SlackBuild')
| -rwxr-xr-x | extra/source/recordmydesktop/recordmydesktop.SlackBuild | 267 |
1 files changed, 0 insertions, 267 deletions
diff --git a/extra/source/recordmydesktop/recordmydesktop.SlackBuild b/extra/source/recordmydesktop/recordmydesktop.SlackBuild deleted file mode 100755 index 1b3f10b5..00000000 --- a/extra/source/recordmydesktop/recordmydesktop.SlackBuild +++ /dev/null @@ -1,267 +0,0 @@ -#!/bin/sh -# $Id: recordmydesktop.SlackBuild,v 1.8 2009/05/12 22:14:43 root Exp root $ -# Copyright (c) 2008 Eric Hameleers <alien@slackware.com> -# Copyright 2018 Patrick J. Volkerding, Sebeka, Minnesota, USA -# All rights reserved. -# -# Permission to use, copy, modify, and distribute this software for -# any purpose with or without fee is hereby granted, provided that -# the above copyright notice and this permission notice appear in all -# copies. -# -# THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED OR IMPLIED -# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. -# IN NO EVENT SHALL THE AUTHORS AND COPYRIGHT HOLDERS AND THEIR -# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, -# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT -# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF -# USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -# ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, -# OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT -# OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF -# SUCH DAMAGE. -# ----------------------------------------------------------------------------- -# -# Slackware SlackBuild script -# =========================== -# By: Eric Hameleers <alien@slackware.com> -# For: recordmydesktop -# Descr: record desktop sessions with audio and video -# URL: http://recordmydesktop.sourceforge.net/ -# Needs: -# Changelog: -# 0.3.8.1-1: 17/Dec/2008 by Eric Hameleers <alien@slackware.com> -# * Initial build. -# 0.3.8.1-2: 13/may/2009 by Eric Hameleers <alien@slackware.com> -# * Rebuilt for python 2.6.2. -# -# Run 'sh recordmydesktop.SlackBuild --cleanup' to build a Slackware package. -# The package (.txz) and .txt file as well as build logs are created in /tmp . -# Install it using 'installpkg'. -# -# ----------------------------------------------------------------------------- - -# Set initial variables: - -PKGNAM=recordmydesktop -VERSION=${VERSION:-0.3.8.1} -QTVER=${QTVER:-0.3.8} -BUILD=${BUILD:-4} -NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "} - -# Automatically determine the architecture we're building on: -if [ -z "$ARCH" ]; then - case "$(uname -m)" in - i?86) ARCH=i586 ;; - arm*) readelf /usr/bin/file -A | egrep -q "Tag_CPU.*[4,5]" && ARCH=arm || ARCH=armv7lh ;; - # Unless $ARCH is already set, use uname -m for all other archs: - *) ARCH=$(uname -m) ;; - esac - export ARCH -fi - -# If the variable PRINT_PACKAGE_NAME is set, then this script will report what -# the name of the created package would be, and then exit. This information -# could be useful to other scripts. -if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then - echo "$PKGNAM-$VERSION-$ARCH-$BUILD.txz" - exit 0 -fi - -DOCS="AUTHORS COPYING README ChangeLog" -QTDOCS="AUTHORS COPYING README ChangeLog" - -# Where do we look for sources? -cd $(dirname $0) ; SRCDIR=$(pwd) - -# Place to build (TMP) package (PKG) and output (OUTPUT) the program: -TMP=${TMP:-/tmp/build} -PKG=$TMP/package-$PKGNAM -OUTPUT=${OUTPUT:-/tmp} - -SOURCE[0]="$SRCDIR/${PKGNAM}-${VERSION}.tar.gz" -SRCURL[0]="http://downloads.sourceforge.net/${PKGNAM}/${PKGNAM}-${VERSION}.tar.gz" - -SOURCE[1]="$SRCDIR/qt-${PKGNAM}-${QTVER}.tar.gz" -SRCURL[1]="http://downloads.sourceforge.net/${PKGNAM}/qt-${PKGNAM}-${QTVER}.tar.gz" - -## -## --- with a little luck, you won't have to edit below this point --- ## -## - -# Exit the script on errors: -set -e -trap 'echo "$0 FAILED at line ${LINENO}" | tee $OUTPUT/error-${PKGNAM}.log' ERR -# Catch unitialized variables: -set -u -P1=${1:-1} - -case "$ARCH" in - i586) SLKCFLAGS="-O2 -march=i586 -mtune=i686" - SLKLDFLAGS=""; LIBDIRSUFFIX="" - ;; - s390) SLKCFLAGS="-O2" - SLKLDFLAGS=""; LIBDIRSUFFIX="" - ;; - powerpc) SLKCFLAGS="-O2" - SLKLDFLAGS=""; LIBDIRSUFFIX="" - ;; - x86_64) SLKCFLAGS="-O2 -fPIC" - SLKLDFLAGS="-L/usr/lib64"; LIBDIRSUFFIX="64" - ;; - athlon-xp) SLKCFLAGS="-march=athlon-xp -O3 -pipe -fomit-frame-pointer" - SLKLDFLAGS=""; LIBDIRSUFFIX="" - ;; -esac - -# Create working directories: -mkdir -p $OUTPUT # place for the package to be saved -mkdir -p $TMP/tmp-$PKGNAM # location to build the source -mkdir -p $PKG # place for the package to be built -rm -rf $PKG/* # always erase old package's contents -rm -rf $TMP/tmp-$PKGNAM/* # remove the remnants of previous build -rm -rf $OUTPUT/{configure,make,install,error,makepkg}-$PKGNAM.log - # remove old log files - -# Source file availability: -for (( i = 0; i < ${#SOURCE[*]}; i++ )) ; do - if ! [ -f ${SOURCE[$i]} ]; then - if ! [ "x${SRCURL[$i]}" == "x" ]; then - # Check if the $SRCDIR is writable at all - if not, download to $OUTPUT - [ -w "$SRCDIR" ] || SOURCE[$i]="$OUTPUT/$(basename ${SOURCE[$i]})" - echo "Source '$(basename ${SOURCE[$i]})' not available yet..." - echo "Will download file to $(dirname $SOURCE[$i])" - wget -nv -T 20 -O "${SOURCE[$i]}" "${SRCURL[$i]}" || true - if [ $? -ne 0 -o ! -s "${SOURCE[$i]}" ]; then - echo "Downloading '$(basename ${SOURCE[$i]})' failed.. aborting the build." - mv -f "${SOURCE[$i]}" "${SOURCE[$i]}".FAIL - exit 1 - fi - else - echo "File '$(basename ${SOURCE[$i]})' not available.. aborting the build." - exit 1 - fi - fi -done - -if [ "$P1" == "--download" ]; then - echo "Download complete." - exit 0 -fi - -# --- PACKAGE BUILDING --- - -echo "++" -echo "|| $PKGNAM-$VERSION" -echo "++" - -cd $TMP/tmp-$PKGNAM -echo "Extracting the source archive(s) for $PKGNAM..." -for (( i = 0; i < ${#SOURCE[*]}; i++ )) ; do -tar -xvf ${SOURCE[$i]} -done -chown -R root:root * -chmod -R u+w,go+r-w,a-s * - -echo Building ... - -# First, the commandline program: -cd ${PKGNAM}-${VERSION} - # Apply bugfix patches from Arch: - zcat $SRCDIR/recordmydesktop-bitrate.patch.gz | patch -p1 --verbose || exit 1 - zcat $SRCDIR/shmstr-to-shmproto.patch.gz | patch -p0 --verbose || exit 1 - LDFLAGS="$SLKLDFLAGS" \ - CXXFLAGS="$SLKCFLAGS" \ - CFLAGS="$SLKCFLAGS" \ - ./configure --prefix=/usr \ - --libdir=/usr/lib${LIBDIRSUFFIX} \ - --localstatedir=/var \ - --sysconfdir=/etc \ - --mandir=/usr/man \ - --program-prefix= \ - --program-suffix= \ - --build=$ARCH-slackware-linux \ - 2>&1 | tee $OUTPUT/configure-${PKGNAM}.log - make 2>&1 | tee $OUTPUT/make-${PKGNAM}.log - - if $(which installwatch > /dev/null 2>&1); then - installwatch -o $OUTPUT/install-${PKGNAM}.log make DESTDIR=$PKG install - else - make DESTDIR=$PKG install 2>&1 |tee $OUTPUT/install-${PKGNAM}.log - fi -cd .. - -# Next, the QT4 GUI program: -cd qt-${PKGNAM}-${QTVER} - LDFLAGS="$SLKLDFLAGS" \ - CXXFLAGS="$SLKCFLAGS" \ - CFLAGS="$SLKCFLAGS" \ - ./configure --prefix=/usr \ - --libdir=/usr/lib${LIBDIRSUFFIX} \ - --localstatedir=/var \ - --sysconfdir=/etc \ - --mandir=/usr/man \ - --program-prefix= \ - --program-suffix= \ - --build=$ARCH-slackware-linux \ - 2>&1 | tee $OUTPUT/configure-qt-${PKGNAM}.log - make 2>&1 | tee $OUTPUT/make-qt-${PKGNAM}.log - - if $(which installwatch > /dev/null 2>&1); then - installwatch -o $OUTPUT/install-${PKGNAM}.log make DESTDIR=$PKG install - else - make DESTDIR=$PKG install 2>&1 |tee $OUTPUT/install-${PKGNAM}.log - fi -cd .. - -# Add this to the doinst.sh: -! [ -d $PKG/install ] && mkdir -p $PKG/install -cat <<EOT >> $PKG/install/doinst.sh -# Update the desktop database: -if [ -x usr/bin/update-desktop-database ]; then - chroot . /usr/bin/update-desktop-database /usr/share/applications > /dev/null 2>&1 -fi - -EOT - -# Add documentation: -mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION/qt-${PKGNAM} -( cd ${PKGNAM}-${VERSION} - cp -a $DOCS $PKG/usr/doc/$PKGNAM-$VERSION || true -) -( cd qt-${PKGNAM}-${QTVER} - cp -a $QTDOCS $PKG/usr/doc/$PKGNAM-$VERSION/qt-${PKGNAM} || true -) -cp -a $SRCDIR/$(basename $0) $PKG/usr/doc/$PKGNAM-$VERSION/$PKGNAM.SlackBuild -chown -R root:root $PKG/usr/doc/$PKGNAM-$VERSION -find $PKG/usr/doc -type f -exec chmod 644 {} \+ - -# Compress the man page(s): -if [ -d $PKG/usr/man ]; then - find $PKG/usr/man -type f -name "*.?" -exec gzip -9f {} \+ - for i in $(find $PKG/usr/man -type l -name "*.?") ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done -fi - -# Strip binaries: -find $PKG | xargs file | grep -e "executable" -e "shared object" \ - | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null - -# Add a package description: -mkdir -p $PKG/install -cat $SRCDIR/slack-desc > $PKG/install/slack-desc -if [ -f $SRCDIR/doinst.sh ]; then - cat $SRCDIR/doinst.sh >> $PKG/install/doinst.sh -fi - -# Build the package: -cd $PKG -makepkg --linkadd y --chown n $OUTPUT/${PKGNAM}-${VERSION}-${ARCH}-${BUILD}.txz 2>&1 | tee $OUTPUT/makepkg-${PKGNAM}.log -cd $OUTPUT -md5sum ${PKGNAM}-${VERSION}-${ARCH}-${BUILD}.txz > ${PKGNAM}-${VERSION}-${ARCH}-${BUILD}.txz.md5 -cd - -cat $PKG/install/slack-desc | grep "^${PKGNAM}" > $OUTPUT/${PKGNAM}-${VERSION}-${ARCH}-${BUILD}.txt -if [ -f $PKG/install/slack-required ]; then - cat $PKG/install/slack-required > $OUTPUT/${PKGNAM}-${VERSION}-${ARCH}-${BUILD}.dep -fi - |