10 files changed, 0 insertions, 450 deletions
diff --git a/pasture/source/gxine/gxine.SlackBuild b/pasture/source/gxine/gxine.SlackBuild
deleted file mode 100755
index 172d17aa..00000000
--- a/pasture/source/gxine/gxine.SlackBuild
+++ /dev/null
@@ -1,111 +0,0 @@
-#!/bin/sh
-
-# Copyright 2008, 2009, 2010  Patrick J. Volkerding, Sebeka, MN, USA
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
-#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
-#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-VERSION=0.5.905
-BUILD=${BUILD:-1}
-
-# Automatically determine the architecture we're building on:
-if [ -z "$ARCH" ]; then
-  case "$( uname -m )" in
-    i?86) export ARCH=i486 ;;
-    arm*) export ARCH=arm ;;
-    # Unless $ARCH is already set, use uname -m for all other archs:
-       *) export ARCH=$( uname -m ) ;;
-  esac
-fi
-
-if [ "$ARCH" = "i486" ]; then
-  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
-  LIBDIRSUFFIX=""
-elif [ "$ARCH" = "s390" ]; then
-  SLKCFLAGS="-O2"
-  LIBDIRSUFFIX=""
-elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2 -fPIC"
-  LIBDIRSUFFIX="64"
-else
-  SLKCFLAGS="-O2"
-  LIBDIRSUFFIX=""
-fi
-
-NUMJOBS=${NUMJOBS:-" -j7 "}
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-gxine
-rm -rf $PKG
-mkdir -p $TMP $PKG
-
-cd $TMP
-rm -rf gxine-$VERSION
-tar xvf $CWD/gxine-$VERSION.tar.bz2 || exit 1
-cd gxine-$VERSION || exit 1
-chown -R root:root .
-find . \
-  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
-  -exec chmod 755 {} \; -o \
-  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
-  -exec chmod 644 {} \;
-
-CFLAGS="$SLKCFLAGS" \
-./configure \
-  --prefix=/usr \
-  --libdir=/usr/lib${LIBDIRSUFFIX} \
-  --sysconfdir=/etc \
-  --localstatedir=/var/lib \
-  --mandir=/usr/man \
-  --disable-static \
-  --with-browser-plugin \
-  --build=$ARCH-slackware-linux
-
-make $NUMJOBS || make || exit 1
-make install DESTDIR=$PKG || exit 1
-
-#zcat $CWD/gxine.desktop.gz > $PKG/usr/share/applications/gxine.desktop
-#if [ ! -r $PKG/usr/share/pixmaps/gxine.png ]; then
-#  exit 1
-#fi
-
-# I'm sorry, but making this link was the worst suggestion I ever
-# went along with.  I'll continue to include it (for now), but having
-# (buggy) gxine pop up without prompting all the time is ANNOYING!!!
-#mkdir -p $PKG/usr/lib${LIBDIRSUFFIX}/mozilla/plugins
-#( cd $PKG/usr/lib${LIBDIRSUFFIX}/mozilla/plugins
-#  ln -sf /usr/lib${LIBDIRSUFFIX}/gxine/gxineplugin.so .
-#)
-
-find $PKG | xargs file | grep -e "executable" -e "shared object" \
-  | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
-
-find $PKG/usr/man -type f -exec gzip -9 {} \;
-
-mkdir -p $PKG/usr/doc/gxine-$VERSION
-cp -a \
-  ABOUT-NLS AUTHORS COPYING* INSTALL NEWS README TODO \
-  $PKG/usr/doc/gxine-$VERSION
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-
-cd $PKG
-/sbin/makepkg -l y -c n $TMP/gxine-$VERSION-$ARCH-$BUILD.txz
-
diff --git a/pasture/source/gxine/gxine.desktop b/pasture/source/gxine/gxine.desktop
deleted file mode 100644
index 54e5e6c2..00000000
--- a/pasture/source/gxine/gxine.desktop
+++ /dev/null
@@ -1,14 +0,0 @@
-[Desktop Entry]
-Version=1.0
-Encoding=UTF-8
-Name=gxine
-GenericName=Video Player
-Comment=Play films and songs, or watch digital TV
-Exec=gxine
-MultipleArgs=true
-Icon=/usr/share/pixmaps/gxine.png
-Terminal=false
-Type=Application
-StartupNotify=true
-Categories=GTK;Application;AudioVideo;
-MimeType=video/mpeg;video/msvideo;video/quicktime;video/x-avi;video/x-ms-asf;video/x-ms-wmv;video/x-msvideo;application/x-ogg;application/ogg;audio/x-mp3;audio/x-mpeg;video/x-mpeg;video/x-fli;audio/x-wav;audio/x-mpegurl;audio/x-scpls;audio/x-ms-asx;application/vnd.rn-realmedia;audio/x-real-audio;audio/x-pn-realaudio;application/x-flac;audio/x-flac;application/x-shockwave-flash;audio/mpeg;audio/x-ms-asf;audio/x-m4a;audio/x-ms-wax;video/dv;video/x-anim;video/x-flc;misc/ultravox;application/x-matroska;audio/vnd.rn-realaudio;audio/x-pn-aiff;audio/x-pn-au;audio/x-pn-wav;audio/x-pn-windows-acm;image/vnd.rn-realpix;video/vnd.rn-realvideo
diff --git a/pasture/source/gxine/slack-desc b/pasture/source/gxine/slack-desc
deleted file mode 100644
index 18f7cef4..00000000
--- a/pasture/source/gxine/slack-desc
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-     |-----handy-ruler------------------------------------------------------|
-gxine: gxine (GTK+ media player based on Xine)
-gxine:
-gxine: Xine is a free multimedia player.  It plays back CDs, DVDs, and VCDs,
-gxine: multimedia files, and multimedia streamed over a network.
-gxine:
-gxine: The gxine package contains a GTK+ graphical user interface for the
-gxine: Xine multimedia player.
-gxine:
-gxine:
-gxine:
-gxine:
diff --git a/pasture/source/make/make.SlackBuild b/pasture/source/make/make.SlackBuild
deleted file mode 100755
index 32e4b250..00000000
--- a/pasture/source/make/make.SlackBuild
+++ /dev/null
@@ -1,98 +0,0 @@
-#!/bin/sh
-
-# Copyright 2005-2010  Patrick J. Volkerding, Sebeka, Minnesota, USA
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
-#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
-#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-
-VERSION=3.81
-BUILD=${BUILD:-3}
-
-# Automatically determine the architecture we're building on:
-if [ -z "$ARCH" ]; then
-  case "$( uname -m )" in
-    i?86) export ARCH=i486 ;;
-    arm*) export ARCH=arm ;;
-    # Unless $ARCH is already set, use uname -m for all other archs:
-       *) export ARCH=$( uname -m ) ;;
-  esac
-fi
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-make
-
-if [ "$ARCH" = "i386" ]; then
-  SLKCFLAGS="-O2 -march=i386 -mcpu=i686"
-elif [ "$ARCH" = "i486" ]; then
-  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
-elif [ "$ARCH" = "s390" ]; then
-  SLKCFLAGS="-O2"
-elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2 -fPIC"
-else
-  SLKCFLAGS="-O2"
-fi
-
-rm -rf $PKG
-mkdir -p $TMP $PKG
-
-cd $TMP
-rm -rf make-$VERSION
-tar xjvf $CWD/make-$VERSION.tar.bz2 || exit 1
-cd make-$VERSION || exit 1
-chown -R root:root .
-find . \
-  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
-  -exec chmod 755 {} \; -o \
-  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
-  -exec chmod 644 {} \;
-
-CFLAGS="$SLKCFLAGS" \
-./configure \
-  --prefix=/usr \
-  --libdir=/usr/lib${LIBDIRSUFFIX} \
-  --mandir=/usr/man \
-  --infodir=/usr/info \
-  --build=$ARCH-slackware-linux
-make || exit 1
-make install DESTDIR=$PKG || exit 1
-( cd $PKG
-  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
-  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
-)
-gzip -9 $PKG/usr/man/man1/*
-rm $PKG/usr/info/dir
-gzip -9 $PKG/usr/info/*
-# This has been here so long that it should probably stay.
-# Trying to get rid of ginstall didn't go well, so...  :-)
-( cd $PKG/usr/bin
-  rm -f gmake
-  ln -sf make gmake )
-mkdir -p $PKG/usr/doc/make-$VERSION
-cp -a \
-  ABOUT-NLS AUTHORS COPYING NEWS README* \
-  $PKG/usr/doc/make-$VERSION/
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-
-# Build the package:
-cd $PKG
-makepkg -l y -c n $TMP/make-$VERSION-$ARCH-$BUILD.txz
-
diff --git a/pasture/source/make/slack-desc b/pasture/source/make/slack-desc
deleted file mode 100644
index ef19ca33..00000000
--- a/pasture/source/make/slack-desc
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-    |-----handy-ruler------------------------------------------------------|
-make: make (GNU make utility to maintain groups of programs)
-make:
-make: This is the GNU implementation of make, which was written by Richard
-make: Stallman and Roland McGrath.  The purpose of the make utility is to
-make: determine automatically which pieces of a large program need to be 
-make: recompiled, and issue the commands to recompile them.  
-make:
-make: This is needed to compile just about any major C program, including
-make: the Linux kernel.
-make:
-make:
diff --git a/pasture/source/mesa-7.8.2/README.GIT b/pasture/source/mesa-7.8.2/README.GIT
deleted file mode 100644
index 4e79f374..00000000
--- a/pasture/source/mesa-7.8.2/README.GIT
+++ /dev/null
@@ -1,16 +0,0 @@
-Anonymous git Access
-
-   To get the Mesa sources anonymously (read-only):
-
-    1. Install the git software on your computer if needed.
-
-    2. Get an initial, local copy of the repository with:
-
-     git clone git://anongit.freedesktop.org/git/mesa/mesa
-
-
-    3. Later, you can update your tree from the master repository with:
-
-     git pull origin
-
-
diff --git a/pasture/source/mesa-7.8.2/get-mesa.sh b/pasture/source/mesa-7.8.2/get-mesa.sh
deleted file mode 100644
index 710043c6..00000000
--- a/pasture/source/mesa-7.8.2/get-mesa.sh
+++ /dev/null
@@ -1,8 +0,0 @@
-rm -rf mesa
-git clone git://anongit.freedesktop.org/git/mesa/mesa
-# package the source archive and clean up:
-( cd mesa ; find . -type d -name .git -exec rm -rf {} \; 2> /dev/null )
-DATE=$(date +%Y%m%d)
-mv mesa mesa-${DATE}_git
-tar cjf mesa-${DATE}_git.tar.bz2 mesa-${DATE}_git
-rm -rf mesa-${DATE}_git
diff --git a/pasture/source/mesa-7.8.2/mesa.SlackBuild b/pasture/source/mesa-7.8.2/mesa.SlackBuild
deleted file mode 100755
index d4579625..00000000
--- a/pasture/source/mesa-7.8.2/mesa.SlackBuild
+++ /dev/null
@@ -1,145 +0,0 @@
-#!/bin/sh
-
-# Copyright 2006, 2007, 2008, 2009, 2010  Patrick J. Volkerding, Sebeka, MN, USA
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
-#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
-#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-PKGNAM=mesa
-VERSION=${VERSION:-$(echo MesaLib-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
-BUILD=${BUILD:-1}
-
-PKG_VERSION=${VERSION}
-
-# Automatically determine the architecture we're building on:
-if [ -z "$ARCH" ]; then
-  case "$( uname -m )" in
-    i?86) export ARCH=i486 ;;
-    arm*) export ARCH=arm ;;
-    # Unless $ARCH is already set, use uname -m for all other archs:
-       *) export ARCH=$( uname -m ) ;;
-  esac
-fi
-
-# Be sure this list is up-to-date:
-DRI_DRIVERS="i810,i915,i965,mach64,mga,r128,r200,r300,r600,radeon,savage,sis,tdfx,unichrome,swrast"
-
-NUMJOBS=${NUMJOBS:--j8}
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp}
-PKG=$TMP/package-mesa
-
-if [ "$ARCH" = "i486" ]; then
-  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
-  LIBDIRSUFFIX=""
-elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2 -fPIC"
-  LIBDIRSUFFIX="64"
-else
-  SLKCFLAGS="-O2"
-  LIBDIRSUFFIX=""
-fi
-
-rm -rf $PKG
-mkdir -p $TMP $PKG
-cd $TMP
-rm -rf Mesa-${VERSION}
-tar xvf $CWD/MesaLib-${PKG_VERSION}.tar.?z* || exit 1
-tar xvf $CWD/MesaGLUT-${PKG_VERSION}.tar.?z* || exit 1
-tar xvf $CWD/MesaDemos-${PKG_VERSION}.tar.?z* || exit 1
-cd Mesa-$VERSION
-
-# Make sure ownerships and permissions are sane:
-chown -R root:root .
-find . \
-  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
-  -exec chmod 755 {} \; -o \
-  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
-  -exec chmod 644 {} \;
-
-CFLAGS="$SLKCFLAGS" \
-./configure \
-  --prefix=/usr \
-  --sysconfdir=/etc \
-  --libdir=/usr/lib${LIBDIRSUFFIX} \
-  --mandir=/usr/man \
-  --docdir=/usr/doc/mesa-$VERSION \
-  --with-dri-driverdir=/usr/lib${LIBDIRSUFFIX}/xorg/modules/dri \
-  --with-dri-drivers="$DRI_DRIVERS" \
-  --build=$ARCH-slackware-linux
-
-# Nobody else is enabling this.  Seems like it's asking for trouble.
-#  --enable-xcb
-
-# This doesn't seem to build - maybe it needs something else...
-#  --enable-gallium-nouveau 
-
-make $NUMJOBS || make || exit 1
-make install DESTDIR=$PKG || exit 1
-
-# Install gears and glinfo:
-mkdir -p $PKG/usr/bin
-cp -a progs/demos/gears $PKG/usr/bin/gears
-cp -a progs/demos/glinfo $PKG/usr/bin/glinfo
-
-# Install some "demos":
-( cd progs/xdemos
-  cp glthreads glxcontexts glxdemo glxgears glxgears_fbconfig glxheads \
-    glxinfo glxpbdemo glxpixmap \
-    $PKG/usr/bin
-)
-
-# Strip binaries:
-find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
-  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
-
-# Compress and link manpages, if any:
-if [ -d $PKG/usr/man ]; then
-  ( cd $PKG/usr/man
-    for manpagedir in $(find . -type d -name "man*") ; do
-      ( cd $manpagedir
-        for eachpage in $( find . -type l -maxdepth 1) ; do
-          ln -s $( readlink $eachpage ).gz $eachpage.gz
-          rm $eachpage
-        done
-        gzip -9 *.?
-      )
-    done
-  )
-fi
-
-# Compress info files, if any:
-if [ -d $PKG/usr/info ]; then
-  ( cd $PKG/usr/info
-    rm -f dir
-    gzip -9 *
-  )
-fi
-
-mkdir -p $PKG/usr/doc/Mesa-$PKG_VERSION/html
-cp -a COPYING docs/relnotes-$VERSION.html $PKG/usr/doc/Mesa-$PKG_VERSION
-rm -f docs/relnotes*.html docs/RELNOTES*
-cp -a docs/*.html $PKG/usr/doc/Mesa-$PKG_VERSION/html
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-
-cd $PKG
-/sbin/makepkg -l y -c n $TMP/${PKGNAM}-$PKG_VERSION-$ARCH-$BUILD.txz
-
diff --git a/pasture/source/mesa-7.8.2/mesa.url b/pasture/source/mesa-7.8.2/mesa.url
deleted file mode 100644
index f4efeae6..00000000
--- a/pasture/source/mesa-7.8.2/mesa.url
+++ /dev/null
@@ -1 +0,0 @@
-ftp://ftp.freedesktop.org/pub/mesa/
diff --git a/pasture/source/mesa-7.8.2/slack-desc b/pasture/source/mesa-7.8.2/slack-desc
deleted file mode 100644
index 113964bd..00000000
--- a/pasture/source/mesa-7.8.2/slack-desc
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
-# make exactly 11 lines for the formatting to be correct.  It's also
-# customary to leave one space after the ':'.
-
-    |-----handy-ruler------------------------------------------------------|
-mesa: mesa (a 3-D graphics library)
-mesa:
-mesa: Mesa is a 3-D graphics library with an API very similar to that of
-mesa: another well-known 3-D graphics library.  :-)  The Mesa libraries are
-mesa: used by X to provide both software and hardware accelerated graphics.
-mesa:
-mesa: Mesa was written by Brian Paul.
-mesa:
-mesa:
-mesa:
-mesa: