5 files changed, 184 insertions, 0 deletions
diff --git a/patches/source/wicd/README.SLACKWARE b/patches/source/wicd/README.SLACKWARE
new file mode 100644
index 00000000..e7a374dc
--- /dev/null
+++ b/patches/source/wicd/README.SLACKWARE
@@ -0,0 +1,17 @@
+After installing this package, make sure the /etc/rc.d/rc.wicd
+script is executable; if necessary, do:
+  chmod +x /etc/rc.d/rc.wicd
+
+Results have varied, but you will probably need/want to remove
+any references to interfaces from /etc/rc.d/rc.inet1.conf - in
+other words, make that file look as if netconfig has never been
+run.
+
+When you start X, you should see a wicd icon in the system tray;
+click on it to open the gui interface and configure as desired.
+Your user account will need to be a member of the 'netdev' group 
+in order to use wicd.
+
+Note that urwid will need to be installed if you want to use the 
+curses client.  Also, if you don't have kde installed, you won't 
+have a graphical sudo client available.
diff --git a/patches/source/wicd/doinst.sh b/patches/source/wicd/doinst.sh
new file mode 100644
index 00000000..78732c5b
--- /dev/null
+++ b/patches/source/wicd/doinst.sh
@@ -0,0 +1,37 @@
+config() {
+  NEW="$1"
+  OLD="$(dirname $NEW)/$(basename $NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r $OLD ]; then
+    mv $NEW $OLD
+  elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then
+    # toss the redundant copy
+    rm $NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+# Keep same perms on rc.wicd.new:
+if [ -e etc/rc.d/rc.wicd ]; then
+  cp -a etc/rc.d/rc.wicd etc/rc.d/rc.wicd.new.incoming
+  cat etc/rc.d/rc.wicd.new > etc/rc.d/rc.wicd.new.incoming
+  mv etc/rc.d/rc.wicd.new.incoming etc/rc.d/rc.wicd.new
+fi
+
+# Update desktop menu
+if [ -x /usr/bin/update-desktop-database ]; then
+  /usr/bin/update-desktop-database -q usr/share/applications >/dev/null 2>&1
+fi
+
+# Update icon cache if one exists
+if [ -r usr/share/icons/hicolor/icon-theme.cache ]; then
+  if [ -x /usr/bin/gtk-update-icon-cache ]; then
+    /usr/bin/gtk-update-icon-cache -t -f usr/share/icons/hicolor >/dev/null 2>&1
+  fi
+fi
+
+config etc/dbus-1/system.d/wicd.conf.new
+config etc/rc.d/rc.wicd.new
+config etc/wicd/manager-settings.conf.new
+config etc/logrotate.d/wicd.logrotate.new
+
diff --git a/patches/source/wicd/slack-desc b/patches/source/wicd/slack-desc
new file mode 100644
index 00000000..47cf875f
--- /dev/null
+++ b/patches/source/wicd/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+    |-----handy-ruler-------------------------------------------------------|
+wicd: wicd (network manager for linux)
+wicd:
+wicd: wicd is a wired and wireless network manager for Linux.
+wicd: Some features include:
+wicd: - Ability to connect to wired and wireless networks
+wicd: - Profiles for each wireless network and wired network
+wicd: - Many encryption schemes, some of which include WEP/WPA/WPA2
+wicd: - Compatible with wireless-tools 
+wicd:
+wicd: Homepage: http://wicd.net
+wicd:
diff --git a/patches/source/wicd/wicd-1.7.2.4.sanitize.string.bugfix.diff b/patches/source/wicd/wicd-1.7.2.4.sanitize.string.bugfix.diff
new file mode 100644
index 00000000..4be44631
--- /dev/null
+++ b/patches/source/wicd/wicd-1.7.2.4.sanitize.string.bugfix.diff
@@ -0,0 +1,11 @@
+--- ./wicd/misc.py.orig	2012-04-30 14:20:09.000000000 -0500
++++ ./wicd/misc.py	2012-05-09 14:08:24.611298308 -0500
+@@ -430,7 +430,7 @@
+     """ Sanitize property names to be used in config-files. """
+     allowed = string.ascii_letters + '_' + string.digits
+     table = string.maketrans(allowed, ' ' * len(allowed))
+-    return s.translate(None, table)
++    return s.encode('ascii', 'replace').translate(None, table)
+ 
+ def sanitize_escaped(s):
+     """ Sanitize double-escaped unicode strings. """
diff --git a/patches/source/wicd/wicd.SlackBuild b/patches/source/wicd/wicd.SlackBuild
new file mode 100755
index 00000000..6c86ff73
--- /dev/null
+++ b/patches/source/wicd/wicd.SlackBuild
@@ -0,0 +1,100 @@
+#!/bin/sh
+
+# Copyright 2008,2009,2010,2011,2012  Robby Workman  Northport, AL, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PRGNAM=wicd
+VERSION=${VERSION:-1.7.2.4}
+BUILD=${BUILD:-2_slack13.0}
+
+# Automatically determine architecture for build & packaging:
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) export ARCH=i486 ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *)    export ARCH=$( uname -m ) ;;
+  esac
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PRGNAM
+
+if [ "$ARCH" = "i486" ]; then
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  LIBDIRSUFFIX="64"
+else
+  LIBDIRSUFFIX=""
+fi
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP
+rm -rf $PRGNAM-$VERSION
+tar xvf $CWD/$PRGNAM-$VERSION.tar.xz || exit 1
+cd $PRGNAM-$VERSION || exit 1
+chown -R root:root .
+
+zcat $CWD/wicd-1.7.2.4.sanitize.string.bugfix.diff.gz | patch -p1 --verbose || exit 1
+
+python setup.py configure \
+  --lib=/usr/lib${LIBDIRSUFFIX}/wicd \
+  --kdedir=/usr/share/autostart \
+  --backends=/usr/lib${LIBDIRSUFFIX}/wicd/backends \
+  || exit 1
+
+# Bypass the need for pybabel (thanks, dapal!)
+for pofile in $(find po/ -type f -name "*.po") ; do 
+  mkdir -p translations/$(basename ${pofile} .po)/LC_MESSAGES
+  msgfmt -o translations/$(basename ${pofile} .po)/LC_MESSAGES/wicd.mo ${pofile}
+done
+
+python setup.py install --root=$PKG || exit 1
+
+# Handle some Slackware defaults
+#   Use dhcpcd as the dhcp client
+#   Use kdesu as the graphical sudo application
+cat << EOF > $PKG/etc/wicd/manager-settings.conf.new
+[Settings]
+dhcp_client = 2
+sudo_app = 2
+EOF
+
+# Don't clobber configs on upgrade
+mv $PKG/etc/dbus-1/system.d/wicd.conf $PKG/etc/dbus-1/system.d/wicd.conf.new
+mv $PKG/etc/logrotate.d/wicd.logrotate $PKG/etc/logrotate.d/wicd.logrotate.new
+mv $PKG/etc/rc.d/rc.wicd $PKG/etc/rc.d/rc.wicd.new
+
+# Compress the man pages and add a bit to the package docs
+( cd $PKG/usr/man || exit 1
+  find . -type f -exec gzip -9 {} \;
+  for i in $(find . -type l) ; do ln -s $(readlink $i).gz $i.gz ; rm $i ; done
+)
+cat $CWD/README.SLACKWARE > $PKG/usr/doc/$PRGNAM-$VERSION/README.SLACKWARE
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
+
+cd $PKG
+/sbin/makepkg -c n -l y $TMP/$PRGNAM-$VERSION-$ARCH-$BUILD.txz