3 files changed, 150 insertions, 0 deletions
diff --git a/patches/packages/rsync-3.2.5-x86_64-1_slack15.0.txt b/patches/packages/rsync-3.2.5-x86_64-1_slack15.0.txt
new file mode 100644
index 00000000..85206558
--- /dev/null
+++ b/patches/packages/rsync-3.2.5-x86_64-1_slack15.0.txt
@@ -0,0 +1,11 @@
+rsync: rsync (remote file sync)
+rsync:
+rsync: rsync is a replacement for rcp that has many more features. It
+rsync: uses the "rsync algorithm" which provides a very fast method for
+rsync: bringing remote files into sync. It does this by sending just the
+rsync: differences in the files across the link, without requiring that both
+rsync: sets of files are present at one of the ends of the link beforehand.
+rsync: rsync was written by Andrew Tridgell and Paul Mackerras.
+rsync:
+rsync: Homepage: http://rsync.samba.org
+rsync:
diff --git a/patches/source/rsync/rsync.SlackBuild b/patches/source/rsync/rsync.SlackBuild
new file mode 100755
index 00000000..e958127b
--- /dev/null
+++ b/patches/source/rsync/rsync.SlackBuild
@@ -0,0 +1,120 @@
+#!/bin/bash
+
+# Copyright 2008, 2009, 2010, 2011, 2018  Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+cd $(dirname $0) ; CWD=$(pwd)
+
+PKGNAM=rsync
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1_slack15.0}
+
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) export ARCH=i586 ;;
+    arm*) export ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+       *) export ARCH=$( uname -m ) ;;
+  esac
+fi
+
+# If the variable PRINT_PACKAGE_NAME is set, then this script will report what
+# the name of the created package would be, and then exit. This information
+# could be useful to other scripts.
+if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
+  echo "$PKGNAM-$VERSION-$ARCH-$BUILD.txz"
+  exit 0
+fi
+
+NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
+
+if [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+else
+  SLKCFLAGS="-O2"
+fi
+
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-rsync
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+cd $TMP
+rm -rf rsync-$VERSION
+tar xvf $CWD/rsync-$VERSION.tar.?z || exit 1
+cd rsync-$VERSION || exit 1
+
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \+ -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \+
+
+CFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --build=$ARCH-slackware-linux || exit 1
+
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit
+
+mv $PKG/usr/share/man $PKG/usr
+rmdir $PKG/usr/share
+
+# Compress and link manpages, if any:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1 | grep -v '\.gz$') ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+mkdir -p $PKG/usr/doc/rsync-$VERSION/popt
+cp -a \
+  COPYING* INSTALL NEWS README* TODO tech_report.tex \
+  support \
+  $PKG/usr/doc/rsync-$VERSION
+( cd popt
+  cp -a CHANGES COPYING README README.rsync $PKG/usr/doc/rsync-$VERSION/popt
+)
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" \
+  | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+# Build the package:
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/rsync-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/patches/source/rsync/slack-desc b/patches/source/rsync/slack-desc
new file mode 100644
index 00000000..1b04b3b7
--- /dev/null
+++ b/patches/source/rsync/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':'.
+
+     |-----handy-ruler------------------------------------------------------|
+rsync: rsync (remote file sync)
+rsync:
+rsync: rsync is a replacement for rcp that has many more features. It
+rsync: uses the "rsync algorithm" which provides a very fast method for
+rsync: bringing remote files into sync. It does this by sending just the
+rsync: differences in the files across the link, without requiring that both
+rsync: sets of files are present at one of the ends of the link beforehand.
+rsync: rsync was written by Andrew Tridgell and Paul Mackerras.
+rsync:
+rsync: Homepage: http://rsync.samba.org
+rsync: