3 files changed, 182 insertions, 0 deletions
diff --git a/slackware64/l/pygobject3/pygobject3.SlackBuild b/slackware64/l/pygobject3/pygobject3.SlackBuild
new file mode 100755
index 00000000..9eda45f3
--- /dev/null
+++ b/slackware64/l/pygobject3/pygobject3.SlackBuild
@@ -0,0 +1,162 @@
+#!/bin/bash
+
+# Copyright 2007, 2008  Erik Hanson  erik@slackbuilds.org
+# Copyright 2008, 2009, 2010, 2015, 2018  Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# Redistributions of this script must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+cd $(dirname $0) ; CWD=$(pwd)
+
+PKGNAM=pygobject3
+SRCNAM=pygobject
+VERSION=${VERSION:-$(echo $SRCNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i586 ;;
+    arm*) ARCH=arm ;;
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+# If the variable PRINT_PACKAGE_NAME is set, then this script will report what
+# the name of the created package would be, and then exit. This information
+# could be useful to other scripts.
+if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
+  echo "$PKGNAM-$VERSION-$ARCH-$BUILD.txz"
+  exit 0
+fi
+
+NUMJOBS=${NUMJOBS:-" -j$(expr $(nproc) + 1) "}
+
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+if [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+PYTHONLIB=$( python -c 'from distutils.sysconfig import get_python_lib; print(get_python_lib())' )
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP
+rm -rf $SRCNAM-$VERSION
+tar xvf $CWD/$SRCNAM-$VERSION.tar.xz || exit 1
+cd $SRCNAM-$VERSION || exit 1
+chown -R root:root .
+find -L . \
+ \( -perm 777 -o -perm 775 -o -perm 750 -o -perm 711 -o -perm 555 \
+  -o -perm 511 \) -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 640 -o -perm 600 -o -perm 444 \
+ -o -perm 440 -o -perm 400 \) -exec chmod 644 {} \;
+
+# Configure, build, and install (python3 version):
+export CFLAGS="$SLKCFLAGS"
+export CXXFLAGS="$SLKCFLAGS"
+mkdir meson-build
+cd meson-build
+meson setup \
+  --prefix=/usr \
+  --libdir=lib${LIBDIRSUFFIX} \
+  --libexecdir=/usr/libexec \
+  --bindir=/usr/bin \
+  --sbindir=/usr/sbin \
+  --includedir=/usr/include \
+  --datadir=/usr/share \
+  --mandir=/usr/man \
+  --sysconfdir=/etc \
+  --localstatedir=/var \
+  --buildtype=release \
+  -Dpython=python3 \
+  .. || exit 1
+  "${NINJA:=ninja}" $NUMJOBS || exit 1
+  DESTDIR=$PKG $NINJA install || exit 1
+cd ..
+
+# No ninja "make clean"?
+cd $TMP
+rm -rf $SRCNAM-$VERSION
+tar xvf $CWD/$SRCNAM-$VERSION.tar.xz || exit 1
+cd $SRCNAM-$VERSION || exit 1
+chown -R root:root .
+find -L . \
+ \( -perm 777 -o -perm 775 -o -perm 750 -o -perm 711 -o -perm 555 \
+  -o -perm 511 \) -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 640 -o -perm 600 -o -perm 444 \
+ -o -perm 440 -o -perm 400 \) -exec chmod 644 {} \;
+
+# Configure, build, and install (python2 version):
+export CFLAGS="$SLKCFLAGS"
+export CXXFLAGS="$SLKCFLAGS"
+mkdir meson-build
+cd meson-build
+meson setup \
+  --prefix=/usr \
+  --libdir=lib${LIBDIRSUFFIX} \
+  --libexecdir=/usr/libexec \
+  --bindir=/usr/bin \
+  --sbindir=/usr/sbin \
+  --includedir=/usr/include \
+  --datadir=/usr/share \
+  --mandir=/usr/man \
+  --sysconfdir=/etc \
+  --localstatedir=/var \
+  --buildtype=release \
+  -Dpython=python \
+  .. || exit 1
+  ninja || exit 1
+  DESTDIR=$PKG ninja install || exit 1
+cd ..
+
+find $PKG -print0 | xargs -0 file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
+cp -a INSTALL AUTHORS COPYING* NEWS README* \
+    $PKG/usr/doc/$PKGNAM-$VERSION
+( cd $PKG/usr/doc/$PKGNAM-$VERSION
+  ln -s ../../share/gtk-doc/html/pygobject html
+)
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/slackware64/l/pygobject3/pygobject3.url b/slackware64/l/pygobject3/pygobject3.url
new file mode 100644
index 00000000..d53b5218
--- /dev/null
+++ b/slackware64/l/pygobject3/pygobject3.url
@@ -0,0 +1 @@
+http://ftp.gnome.org/pub/GNOME/sources/pygobject/
diff --git a/slackware64/l/pygobject3/slack-desc b/slackware64/l/pygobject3/slack-desc
new file mode 100644
index 00000000..e573345c
--- /dev/null
+++ b/slackware64/l/pygobject3/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.
+# Line up the first '|' above the ':' following the base package name, and
+# the '|' on the right side marks the last column you can put a character in.
+# You must make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':' except on otherwise blank lines.
+
+          |-----handy-ruler------------------------------------------------------|
+pygobject3: pygobject3 (GObject bindings for Python, v3)
+pygobject3:
+pygobject3: This archive contains bindings for the GObject, to be used in Python.
+pygobject3: It is a fairly complete set of bindings, it's already rather useful,
+pygobject3: and is usable to write moderately complex programs.
+pygobject3:
+pygobject3: Homepage: https://live.gnome.org/PyGObject
+pygobject3:
+pygobject3:
+pygobject3:
+pygobject3: