4 files changed, 351 insertions, 0 deletions
diff --git a/source/a/elilo/elilo.SlackBuild b/source/a/elilo/elilo.SlackBuild
new file mode 100755
index 00000000..ad2ffc14
--- /dev/null
+++ b/source/a/elilo/elilo.SlackBuild
@@ -0,0 +1,116 @@
+#!/bin/sh
+
+# Copyright 2013  Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PKGNAM=elilo
+VERSION=${VERSION:-$(echo $PKGNAM*.tar.?z* | rev | cut -f 2 -d - | rev)}
+BUILD=${BUILD:-6}
+
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i486 ;;
+    arm*) ARCH=arm ;;
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+rm -rf $PKG
+mkdir -p $TMP $PKG $OUTPUT
+cd $TMP
+rm -rf elilo
+mkdir elilo
+cd elilo
+tar xvf $CWD/${PKGNAM}-$VERSION-all.tar.?z* || exit 1
+tar xvf elilo-${VERSION}-source.tar.gz || exit 1
+chown -R root:root .
+chmod -R u+w,go+r-w,a-s .
+cd elilo
+
+sed -i "s,/usr/lib,/usr/lib${LIBDIRSUFFIX},g" Make.defaults
+sed -i "s,EFICRT0.*= /usr/lib${LIBDIRSUFFIX},EFICRT0    = /usr/lib${LIBDIRSUFFIX}/gnuefi,g" Make.defaults
+
+# We will build this from source.
+# However, we will package the pre-built EFI binaries, since we would
+# like to include both 32-bit and 64-bit x86 EFI loaders in the
+# finished package.
+
+make || exit 1
+
+# Install the files in the package directory:
+mkdir -p $PKG/usr/sbin
+cp tools/eliloalt $PKG/usr/sbin
+
+# Install eliloconfig, a simple setup script:
+cp -a $CWD/eliloconfig $PKG/usr/sbin
+chown root:root $PKG/usr/sbin/eliloconfig
+chmod 755 $PKG/usr/sbin/eliloconfig
+mkdir -p $PKG/var/log/setup
+cp -a $CWD/setup.ll.eliloconfig $PKG/var/log/setup
+chown root:root $PKG/var/log/setup/setup.ll.eliloconfig
+chmod 755 $PKG/var/log/setup/setup.ll.eliloconfig
+
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
+cp -a \
+  ChangeLog LIMITATIONS README README.gnu-efi TODO docs/* \
+  examples \
+  $PKG/usr/doc/$PKGNAM-$VERSION
+
+# Since it might not be safe to strip the EFI binaries, do this now:
+( cd $PKG
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+)
+
+cd ..
+
+# Install EFI bootloaders in /boot:
+mkdir $PKG/boot
+# The ia32 version is pretty much useless, since 32-bit UEFI is nowhere to be
+# found.  Maybe it would help old 32-bit Intel Macs though?
+cp -a elilo*ia32.efi $PKG/boot/elilo-ia32.efi
+# Itanium binary isn't needed here.
+#cp -a elilo*ia64.efi $PKG/boot/elilo-ia64.efi
+cp -a elilo*x86_64.efi $PKG/boot/elilo-x86_64.efi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/source/a/elilo/eliloconfig b/source/a/elilo/eliloconfig
new file mode 100644
index 00000000..91f66d69
--- /dev/null
+++ b/source/a/elilo/eliloconfig
@@ -0,0 +1,213 @@
+#!/bin/sh
+# Copyright 2013  Patrick Volkerding, Sebeka, Minnesota, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+
+# This script installs the elilo boot loader, the kernel, and optionally
+# an initrd into the EFI System Partition.  A boot menu entry can also be
+# installed using efibootmgr.  The kernel used will be whatever the symlink
+# /boot/vmlinuz points to, and if /boot/initrd.gz exists, that will be 
+# installed as the initrd.
+#
+# The EFI System Partition is expected to be mounted on /boot/efi before
+# running this script.
+
+TMP=/var/log/setup/tmp
+
+# Set the OS root directory (called T_PX for some unknown reason).
+# If an argument is given to this script and it is a directory, it
+# is taken to be the root directory.  First though, we check for a
+# directory named $T_PX, and that gets the first priority.
+if [ ! -d "$T_PX" ]; then
+  if [ ! "$1" = "" ]; then
+    if [ -d "$1" ]; then
+      T_PX="$1"
+    fi
+  else
+    # Are we on the installer image?
+    if [ -r /usr/lib/setup/SeTpartitions ]; then
+      T_PX=/mnt
+    # Or, are we on a running system?
+    elif [ -r /etc/slackware-version ]; then
+      T_PX=/
+    # One more installer-likely thing:
+    elif [ -r /usr/lib/setup/setup ]; then
+      T_PX=/mnt
+    else
+      # We will have to assume we're on an installed and running system.
+      T_PX=/
+    fi
+  fi
+fi
+
+# Determine the root partition (such as /dev/sda1)
+ROOT_DEVICE=$2
+if [ "$ROOT_DEVICE" = "" ]; then
+ if [ -r $TMP/SeTrootdev ]; then
+  ROOT_DEVICE="$(cat $TMP/SeTrootdev)"
+ else
+  ROOT_DEVICE="$(mount | cut -f 1 -d ' ' | head -n 1)"
+ fi
+fi
+
+# If the system is not running under EFI, skip running this script:
+if [ ! -d /sys/firmware/efi ]; then
+  if [ "$T_PX" = "/" ]; then
+    echo "ERROR:  System is not running under UEFI."
+  fi
+  exit
+fi
+
+# If there's no vfat mounted on /boot/efi or /mnt/boot/efi, forget it:
+if ! mount | grep vfat | grep -wq /boot/efi ; then
+  if ! mount | grep vfat | grep -wq /mnt/boot/efi ; then
+    if [ "$T_PX" = "/" ]; then
+      echo "ERROR:  No EFI System Partition mounted on /boot/efi."
+    fi
+    exit
+  fi
+fi
+
+# Figure out the device and partition number of the ESP:
+if mount | grep vfat | grep -wq /boot/efi ; then
+  EFI_DEVICE=$(mount | grep vfat | grep -w /boot/efi | cut -b 1-8)
+  EFI_PARTITION=$(mount | grep vfat | grep -w /boot/efi | cut -f 1 -d ' ' | cut -b 9-)
+else
+  EFI_DEVICE=$(mount | grep vfat | grep -w /mnt/boot/efi | cut -b 1-8)
+  EFI_PARTITION=$(mount | grep vfat | grep -w /mnt/boot/efi | cut -f 1 -d ' ' | cut -b 9-)
+fi
+
+# There better be a kernel:
+if [ ! -r $T_PX/boot/vmlinuz ]; then
+  if [ "$T_PX" = "/" ]; then
+    echo "ERROR:  No kernel found at /boot/vmlinuz."
+  fi
+  exit
+fi
+
+dialog --title "INSTALL ELILO" \
+--backtitle "ELILO (EFI Linux Loader) installation" \
+--menu "ELILO is a Linux boot loader for \
+EFI based systems.  Installing ELILO will allow you to boot your Linux \
+system from the hard drive after selecting it from the UEFI boot menu.  \
+Since an EFI System Partition was detected on this machine, it is \
+recommended that you install ELILO now.  Please select an option:" \
+13 70 2 \
+"install" "Install ELILO on the EFI System Partition" \
+"skip" "Do not install ELILO" 2> $TMP/reply
+if [ $? = 1 -o $? = 255 ]; then
+  exit
+fi
+REPLY="`cat $TMP/reply`"
+rm -f $TMP/reply
+if [ "$REPLY" = "skip" ]; then
+  exit
+fi
+
+mkdir -p $T_PX/boot/efi/EFI/Slackware 1> /dev/null 2> /dev/null
+cat << EOF > $T_PX/boot/efi/EFI/Slackware/elilo.conf
+chooser=simple
+delay=1
+timeout=1
+#
+EOF
+cp -a $T_PX/boot/elilo-x86_64.efi $T_PX/boot/efi/EFI/Slackware/elilo.efi 1> /dev/null 2> /dev/null
+cp $T_PX/boot/vmlinuz $T_PX/boot/efi/EFI/Slackware 1> /dev/null 2> /dev/null
+cat << EOF >> $T_PX/boot/efi/EFI/Slackware/elilo.conf
+image=vmlinuz
+        label=vmlinuz
+EOF
+touch -r $T_PX/boot/vmlinuz $T_PX/boot/efi/EFI/Slackware/vmlinuz
+if [ -r $T_PX/boot/initrd.gz ]; then
+  cp $T_PX/boot/initrd.gz $T_PX/boot/efi/EFI/Slackware 1> /dev/null 2> /dev/null
+  touch -r $T_PX/boot/initrd.gz $T_PX/boot/efi/EFI/Slackware/initrd.gz
+  cat << EOF >> $T_PX/boot/efi/EFI/Slackware/elilo.conf
+        initrd=initrd.gz
+EOF
+fi
+cat << EOF >> $T_PX/boot/efi/EFI/Slackware/elilo.conf
+        read-only
+        append="root=$ROOT_DEVICE vga=normal ro"
+EOF
+
+dialog --title "INSTALL BOOT MENU ENTRY?" \
+--backtitle "ELILO (EFI Linux Loader) installation" \
+--menu "Would you like to install \
+a boot menu entry so that you can easily select Slackware when you boot your \
+machine?  WARNING:  DO NOT install a boot menu entry on Apple hardware.  \
+Apple computers use a different type of EFI firmware, and efibootmgr has \
+been known to damage them.  On all other computers, it is recommended to add \
+a boot menu entry.  Please select an option:" \
+14 70 2 \
+"install" "Install a boot menu entry" \
+"skip" "Do not install a boot menu entry" 2> $TMP/reply
+if [ $? = 1 -o $? = 255 ]; then
+  exit
+fi
+REPLY="`cat $TMP/reply`"
+rm -f $TMP/reply
+if [ "$REPLY" = "skip" ]; then
+  exit
+fi
+
+if [ ! -d /sys/firmware/efi/vars ]; then
+  modprobe efivars 1> /dev/null 2> /dev/null
+  sleep 1 # Probably not needed, but playing it safe
+fi
+# If it's still gone, we fail silently:
+if [ ! -d /sys/firmware/efi/vars ]; then
+  exit
+fi
+
+efibootmgr -v | rev | cut -f 2- | rev | grep Boot0 | grep Slackware | while read line ; do
+  # Reject entries that don't exactly match as not our business
+  if [ ! "$(echo $line | cut -f 2- -d ' ')" = "Slackware" ]; then
+    continue
+  fi
+  ENTRY="$(efibootmgr -v | grep "^$(echo $line | cut -b1-8)")"
+  dialog --title "REMOVE OLD \"Slackware\" EFI BOOT ENTRY?" \
+  --backtitle "ELILO (EFI Linux Loader) installation" \
+  --yesno "An old Slackware boot entry has been found in your EFI boot menu. \
+Would you like to remove this before installing the new Slackware boot \
+entry?  This is recommended.\n\nOld EFI boot menu entry:\n$ENTRY" 13 70
+  if [ ! $? = 0 ]; then
+    continue
+  fi
+  # Remove the boot entry:
+  efibootmgr -q -B -b $(echo $line | cut -b5-8)
+done
+
+efibootmgr -q -c -d $EFI_DEVICE -p $EFI_PARTITION -l "\\EFI\\Slackware\\elilo.efi" -L "Slackware"
+
+efibootmgr -v | rev | cut -f 2- | rev | grep Boot0 | grep Slackware | while read line ; do
+  # Reject entries that don't exactly match as not our business
+  if [ ! "$(echo $line | cut -f 2- -d ' ')" = "Slackware" ]; then
+    continue
+  fi
+  ENTRY="$(efibootmgr -v | grep "^$(echo $line | cut -b1-8)")"
+  if echo $ENTRY | grep -q -F "\EFI\Slackware\elilo.efi" ; then
+  dialog --title "EFI BOOT ENTRY INSTALLED" \
+  --backtitle "ELILO (EFI Linux Loader) installation" \
+  --msgbox "A Slackware boot entry has been installed to your EFI boot
+menu.\n\nEFI boot menu entry:\n$ENTRY" 11 70
+  fi
+done
+
+# Done.
diff --git a/source/a/elilo/setup.ll.eliloconfig b/source/a/elilo/setup.ll.eliloconfig
new file mode 100644
index 00000000..75e56138
--- /dev/null
+++ b/source/a/elilo/setup.ll.eliloconfig
@@ -0,0 +1,3 @@
+#!/bin/sh
+#BLURB="Set up ELILO (EFI LILO) to boot Linux from your hard drive"
+sh usr/sbin/eliloconfig $*
diff --git a/source/a/elilo/slack-desc b/source/a/elilo/slack-desc
new file mode 100644
index 00000000..acacac07
--- /dev/null
+++ b/source/a/elilo/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+     |-----handy-ruler-----------------------------------------------------|
+elilo: elilo (Linux Loader for EFI-based platforms)
+elilo:
+elilo: This is elilo, a boot loader originally developed by HP for IA-64
+elilo: systems.  This is used to load the kernel and initial ramdisk on
+elilo: machines that use UEFI.  Since most UEFI implementations are 64-bit,
+elilo: the 64-bit EFI binary is generally the one to use (even for loading
+elilo: a 32-bit kernel).
+elilo:
+elilo: Homepage: http://elilo.sourceforge.net
+elilo:
+elilo: