diff options
Diffstat (limited to 'source/a/mt-st/mt-st.config.diff')
| -rw-r--r-- | source/a/mt-st/mt-st.config.diff | 172 |
1 files changed, 0 insertions, 172 deletions
diff --git a/source/a/mt-st/mt-st.config.diff b/source/a/mt-st/mt-st.config.diff deleted file mode 100644 index 756261b1..00000000 --- a/source/a/mt-st/mt-st.config.diff +++ /dev/null @@ -1,172 +0,0 @@ ---- mt-st-0.8/stinit.def.examples.configfiles 2002-09-23 19:02:21.000000000 +0200 -+++ mt-st-0.8/stinit.def.examples 2005-04-07 08:21:01.732633520 +0200 -@@ -56,3 +56,169 @@ - mode3 blocksize=0 density=1 # 800 bpi - } - -+# DLT2000 / 2000XT -+manufacturer="QUANTUM" model = "DLT2000" { -+scsi2logical=1 -+can-bsr -+auto-lock=0 -+two-fms=0 -+drive-buffering=1 -+buffer-writes -+read-ahead=1 -+async-writes=1 -+can-partitions=0 -+fast-mteom=1 -+# -+# If your stinit supports the timeouts: -+timeout=3600 # 1 hour -+long-timeout=14400 # 4 hours -+# -+mode1 blocksize=0 density=0x81 # 10GB + compression on DLTtape III, 15+ with DLTtape IIIXT in 2000XT -+mode2 blocksize=0 density=0x80 # 10GB, no compression on DLTtape III, 15 with DLTtape IIIXT in 2000XT -+mode3 blocksize=0 density=0x18 # 6GB, compression not available, on DLTtape III -+mode4 blocksize=0 density=0x17 #2.6GB, compression not available, on DLTtape III -+} -+ -+# DLT4000 -+manufacturer="QUANTUM" model = "DLT4000" { -+scsi2logical=1 -+can-bsr -+auto-lock=0 -+two-fms=0 -+drive-buffering=1 -+buffer-writes -+read-ahead=1 -+async-writes=1 -+can-partitions=0 -+fast-mteom=1 -+# -+# If your stinit supports the timeouts: -+timeout=3600 # 1 hour -+long-timeout=14400 # 4 hours -+# -+# Drive is backwards compatible, use older modes (e.g. from above) as required -+mode1 blocksize=0 density=0x83 # 20GB + compression -+mode2 blocksize=0 density=0x82 # 20GB, no compression -+mode3 blocksize=0 density=0x81 # 10GB + compression (DLT2000 mode) with DLTtape III, 15+ with DLTtape IIIXT in 2000XT -+mode4 blocksize=0 density=0x80 # 10GB, no compression (DLT2000 mode) with DLTtape III, 15 with DLTtape IIIXT in 2000XT -+} -+ -+# DLT7000 -+manufacturer="QUANTUM" model = "DLT7000" { -+scsi2logical=1 -+can-bsr -+auto-lock=0 -+two-fms=0 -+drive-buffering=1 -+buffer-writes -+read-ahead=1 -+async-writes=1 -+can-partitions=0 -+fast-mteom=1 -+# -+# If your stinit supports the timeouts: -+timeout=3600 # 1 hour -+long-timeout=14400 # 4 hours -+# -+# Drive is backwards compatible, use older modes (e.g. from above) as required. -+mode1 blocksize=0 density=0x85 # 35GB + compression -+mode2 blocksize=0 density=0x84 # 35GB, no compression -+mode3 blocksize=0 density=0x83 # 20GB + compression (DLT4000 mode) -+mode4 blocksize=0 density=0x82 # 20GB, no compression (DLT4000 mode) -+} -+ -+# DLT8000 -+manufacturer="QUANTUM" model = "DLT8000" { -+scsi2logical=1 -+can-bsr=1 -+auto-lock=0 -+two-fms=0 -+drive-buffering=1 -+buffer-writes -+read-ahead=1 -+async-writes=1 -+can-partitions=0 -+fast-mteom=1 -+# -+# If your stinit supports the timeouts: -+timeout=3600 # 1 hour -+long-timeout=14400 # 4 hours -+# -+# Drive is backwards compatible to DLT7000, use older modes (e.g. from above) as required. Modes <10GB (<0x19) not supported! -+mode1 blocksize=0 density=0x89 # 40GB + compression -+mode2 blocksize=0 density=0x88 # 40GB, no compression -+mode3 blocksize=0 density=0x85 # 35GB + compression (DLT7000 mode) -+mode4 blocksize=0 density=0x84 # 35GB, no compression (DLT7000 mode) -+} -+ -+ -+# SDLT220 -+manufacturer="QUANTUM" model = "SuperDLT1" { -+scsi2logical=1 -+can-bsr=1 -+auto-lock=0 -+two-fms=0 -+drive-buffering=1 -+buffer-writes -+read-ahead=1 -+async-writes=1 -+can-partitions=0 -+fast-mteom=1 -+# -+# If your stinit supports the timeouts: -+timeout=3600 # 1 hour -+long-timeout=14400 # 4 hours -+# -+# Drive is backwards read compatible to DLT4000/7000/8000. Mode settings are only required for writing, so no need to define any other modes here. -+mode1 blocksize=0 density=0x48 compression=1 # 110 GB + compression -+mode2 blocksize=0 density=0x48 compression=0 # 110 GB, no ompression -+} -+ -+# SDLT320 -+manufacturer="QUANTUM" model = "SDLT320" { -+scsi2logical=1 -+can-bsr=1 -+auto-lock=0 -+two-fms=0 -+drive-buffering=1 -+buffer-writes -+read-ahead=1 -+async-writes=1 -+can-partitions=0 -+fast-mteom=1 -+# -+# If your stinit supports the timeouts: -+timeout=3600 # 1 hour -+long-timeout=14400 # 4 hours -+# -+# Drive is backwards write compatible to SDLT220 and read compatible to DLT4000/7000/8000. Mode settings are only required for writing, so we need only the SDL220/320 modes here -+mode1 blocksize=0 density=0x49 compression=1 # 160 GB + compression -+mode2 blocksize=0 density=0x49 compression=0 # 160 GB, no ompression -+mode3 blocksize=0 density=0x48 compression=1 # 110 GB + compression -+mode4 blocksize=0 density=0x48 compression=0 # 110 GB, no ompression -+} -+ -+# SDLT600 -+manufacturer="QUANTUM" model = "SDLT600" { -+scsi2logical=1 -+can-bsr=1 -+auto-lock=0 -+two-fms=0 -+drive-buffering=1 -+buffer-writes -+read-ahead=1 -+async-writes=1 -+can-partitions=0 -+fast-mteom=1 -+# -+# If your stinit supports the timeouts: -+timeout=3600 # 1 hour -+long-timeout=14400 # 4 hours -+# -+# Drive is backwards read compatible to SDLT220/320 and VS160. Mode settings are only required for writing, so we need only the native SDLT600 mode here. -+mode1 blocksize=0 density=0x4a compression=1 # 300 GB + compression -+mode2 blocksize=0 density=0x4a compression=0 # 300 GB, no ompression -+mode3 blocksize=0 density=0x4a compression=1 # 300 GB + compression -+mode4 blocksize=0 density=0x4a compression=0 # 300 GB, no ompression -+} -+ |