diff options
Diffstat (limited to 'source/a/sysvinit-scripts/scripts/rc.M')
| -rw-r--r-- | source/a/sysvinit-scripts/scripts/rc.M | 355 |
1 files changed, 355 insertions, 0 deletions
diff --git a/source/a/sysvinit-scripts/scripts/rc.M b/source/a/sysvinit-scripts/scripts/rc.M new file mode 100644 index 00000000..fe2c9b6f --- /dev/null +++ b/source/a/sysvinit-scripts/scripts/rc.M @@ -0,0 +1,355 @@ +#!/bin/sh +# +# rc.M This file is executed by init(8) when the system is being +# initialized for one of the "multi user" run levels (i.e. +# levels 1 through 6). It usually does mounting of file +# systems et al. +# +# Version: @(#)/etc/rc.d/rc.M 2.23 Wed Feb 26 19:20:58 PST 2003 +# +# Author: Fred N. van Kempen, <waltje@uwalt.nl.mugnet.org> +# Heavily modified by Patrick Volkerding <volkerdi@slackware.com> +# + +# Tell the viewers what's going to happen. +echo "Going multiuser..." + +# Update all the shared library links: +if [ -x /sbin/ldconfig ]; then + echo "Updating shared library links: /sbin/ldconfig &" + /sbin/ldconfig & +fi + +# Screen blanks after 15 minutes idle time, and powers down in one hour +# if the kernel supports APM or ACPI power management: +/bin/setterm -blank 15 -powersave powerdown -powerdown 60 + +# Set the hostname. +if [ -r /etc/HOSTNAME ]; then + /bin/hostname $(cat /etc/HOSTNAME | cut -f1 -d .) +else + # fall back on this old default: + echo "darkstar.example.net" > /etc/HOSTNAME + /bin/hostname darkstar +fi + +# Save the contents of 'dmesg': +/bin/dmesg -s 65536 > /var/log/dmesg + +# Initialize PCMCIA devices: +# +# NOTE: This used to be started near the top of rc.S so that PCMCIA devices +# could be fsck'ed along with the other drives. This had some unfortunate +# side effects, however, since root isn't yet read-write, and /var might not +# even be mounted the .pid files can't be correctly written in /var/run and +# the pcmcia system can't be correctly shut down. If you want some PCMCIA +# partition to be mounted at boot (or when the card is inserted) then add +# the appropriate lines to /etc/pcmcia/scsi.opts. +# +# Note that the stuff in /etc/pcmcia/ is only for 2.4.x kernels using +# 16-bit PCMCIA cards (not 32-bit Cardbus cards!). For example, with a +# wireless card you might need to set options in /etc/pcmcia OR in +# /etc/rc.d/rc.wireless.conf, or even in /etc/rc.d/rc.inet1.conf (with +# extra options if needed for the encryption key, ESSID, etc.) +# +# Hopefully this situation will be unified in the future, but for now +# that's how it is... +# +if [ -x /etc/rc.d/rc.pcmcia ]; then + . /etc/rc.d/rc.pcmcia start + # The cards might need a little extra time here to initialize. + sleep 5 +fi + +# Start the system logger. +if [ -x /etc/rc.d/rc.syslog -a -x /usr/sbin/syslogd -a -d /var/log ]; then + . /etc/rc.d/rc.syslog start +fi + +# Update the X font indexes: +if [ -x /usr/bin/fc-cache ]; then + echo "Updating X font indexes: /usr/bin/fc-cache -f &" + /usr/bin/fc-cache -f & +fi + +# If we are returning from single-user mode we will need to restart +# udevd on systems that use udev: +if grep -wq sysfs /proc/mounts && grep -wq tmpfs /proc/filesystems ; then + if ! grep -wq nohotplug /proc/cmdline ; then + if [ -x /etc/rc.d/rc.udev ]; then + /bin/sh /etc/rc.d/rc.udev start + fi + fi +fi + +# Initialize the networking hardware. +if [ -x /etc/rc.d/rc.inet1 ]; then + . /etc/rc.d/rc.inet1 +fi + +# Look for additional USB/SCSI/IEEE1394/etc devices on multiple LUNs: +if [ -x /etc/rc.d/rc.scanluns ]; then + . /etc/rc.d/rc.scanluns +fi + +# Start networking daemons: +if [ -x /etc/rc.d/rc.inet2 ]; then + . /etc/rc.d/rc.inet2 +fi + +# Mount any additional filesystem types that haven't already been mounted: +mount -a -v 2> /dev/null | grep -v "already mounted" + +# Start the Network Time Protocol daemon: +if [ -x /etc/rc.d/rc.ntpd ]; then + sh /etc/rc.d/rc.ntpd start +fi + +# Remove stale locks and junk files (must be done after mount -a!) +/bin/rm -f /var/lock/* /var/spool/uucp/LCK..* /tmp/.X*lock /tmp/core /core 2> /dev/null + +# Remove stale hunt sockets so the game can start. +if [ -r /tmp/hunt -o -r /tmp/hunt.stats ]; then + echo "Removing your stale hunt sockets from /tmp." + /bin/rm -f /tmp/hunt* +fi + +# Ensure basic filesystem permissions sanity. +chmod 755 / 2> /dev/null +chmod 1777 /tmp /var/tmp + +# Start APM or ACPI daemon. +# If APM is enabled in the kernel, start apmd: +if [ -e /proc/apm ]; then + if [ -x /usr/sbin/apmd ]; then + echo "Starting APM daemon: /usr/sbin/apmd" + /usr/sbin/apmd + fi +elif [ -x /etc/rc.d/rc.acpid ]; then # otherwise, start acpid: + . /etc/rc.d/rc.acpid start +fi + +# Update any existing icon cache files: +if find /usr/share/icons 2> /dev/null | grep -q icon-theme.cache ; then + for theme_dir in /usr/share/icons/* ; do + if [ -r ${theme_dir}/icon-theme.cache ]; then + echo "Updating icon-theme.cache in ${theme_dir}..." + /usr/bin/gtk-update-icon-cache -t -f ${theme_dir} 1> /dev/null 2> /dev/null & + fi + done + # This would be a large file and probably shouldn't be there. + if [ -r /usr/share/icons/icon-theme.cache ]; then + echo "Deleting icon-theme.cache in /usr/share/icons..." + #/usr/bin/gtk-update-icon-cache -t -f /usr/share/icons 1> /dev/null 2> /dev/null & + rm -f /usr/share/icons/icon-theme.cache + fi +fi + +# Update mime database: +if [ -x /usr/bin/update-mime-database -a -d /usr/share/mime ]; then + echo "Updating MIME database: /usr/bin/update-mime-database /usr/share/mime &" + /usr/bin/update-mime-database /usr/share/mime 1> /dev/null 2> /dev/null & +fi + +# Start D-Bus: +if [ -x /etc/rc.d/rc.messagebus ]; then + sh /etc/rc.d/rc.messagebus start +fi + +# Start HAL: +if [ -x /etc/rc.d/rc.hald ]; then + sh /etc/rc.d/rc.hald start +fi + +# Start Bluetooth: +if [ -x /etc/rc.d/rc.bluetooth ]; then + sh /etc/rc.d/rc.bluetooth start +fi + +# Start wicd: +if [ -x /etc/rc.d/rc.wicd ]; then + sh /etc/rc.d/rc.wicd start +fi + +# These GTK+/pango files need to be kept up to date for +# proper input method, pixbuf loaders, and font support. +if [ -x /usr/bin/update-gtk-immodules ]; then + /usr/bin/update-gtk-immodules --verbose +fi +if [ -x /usr/bin/update-gdk-pixbuf-loaders ]; then + /usr/bin/update-gdk-pixbuf-loaders --verbose +fi +if [ -x /usr/bin/update-pango-querymodules ]; then + /usr/bin/update-pango-querymodules --verbose +fi + +# Start dnsmasq, a simple DHCP/DNS server: +if [ -x /etc/rc.d/rc.dnsmasq ]; then + /etc/rc.d/rc.dnsmasq start +fi + +# Start snmpd: +if [ -x /etc/rc.d/rc.snmpd ]; then + /etc/rc.d/rc.snmpd start +fi + +# Start the print spooling system. This will usually be LPRng (lpd) or CUPS. +if [ -x /etc/rc.d/rc.cups ]; then + # Start CUPS: + /etc/rc.d/rc.cups start +elif [ -x /etc/rc.d/rc.lprng ]; then + # Start LPRng (lpd): + . /etc/rc.d/rc.lprng start +fi + +# Start netatalk. (a file/print server for Macs using Appletalk) +if [ -x /etc/rc.d/rc.atalk ]; then + /etc/rc.d/rc.atalk +fi + +# Start smartd, which monitors the status of S.M.A.R.T. compatible +# hard drives and reports any problems. Note some devices (which aren't +# smart, I guess ;) will hang if probed by smartd, so it's commented out +# by default. +#if [ -x /usr/sbin/smartd ]; then +# /usr/sbin/smartd +#fi + +# If we're using udev, make /dev/cdrom and any other optical drive symlinks +# if some udev rule hasn't made them already: +if grep -wq sysfs /proc/mounts && grep -wq tmpfs /proc/filesystems; then + if ! grep -wq nohotplug /proc/cmdline ; then + if [ -x /lib/udev/rc.optical-symlinks -a -x /etc/rc.d/rc.udev ]; then + /bin/sh /lib/udev/rc.optical-symlinks + fi + fi +fi + +# Monitor the UPS with genpowerd. +# To use this, uncomment this section and edit your settings in +# /etc/genpowerd.conf (serial device, UPS type, etc). For more information, +# see "man genpowerd" or the extensive documentation in the +# /usr/doc/genpower-*/ directory. +# You'll also need to configure a similar block in /etc/rc.d/rc.6 if you want +# support for stopping the UPS's inverter after the machine halts. +#if [ -x /sbin/genpowerd ]; then +# echo "Starting genpowerd daemon..." +# /sbin/genpowerd +#fi + +# Turn on process accounting. To enable process accounting, make sure the +# option for BSD process accounting is enabled in your kernel, and then +# create the file /var/log/pacct (touch /var/log/pacct). By default, process +# accounting is not enabled (since /var/log/pacct does not exist). This is +# because the log file can get VERY large. +if [ -x /sbin/accton -a -r /var/log/pacct ]; then + chmod 640 /var/log/pacct + /sbin/accton /var/log/pacct +fi + +# Start crond (Dillon's crond): +# If you want cron to actually log activity to /var/log/cron, then change +# -l10 to -l8 to increase the logging level. +if [ -x /usr/sbin/crond ]; then + /usr/sbin/crond -l10 >>/var/log/cron 2>&1 +fi + +# Start atd (manages jobs scheduled with 'at'): +if [ -x /usr/sbin/atd ]; then + /usr/sbin/atd -b 15 -l 1 +fi + +# Slackware-Mini-Quota-HOWTO: +# To really activate quotas, you'll need to add 'usrquota' and/or 'grpquota' to +# the appropriate partitions as listed in /etc/fstab. Here's an example: +# +# /dev/hda2 /home ext3 defaults,usrquota 1 1 +# +# You'll then need to setup initial quota files at the top of the partitions +# to support quota, like this: +# touch /home/aquota.user /home/aquota.group +# chmod 600 /home/aquota.user /home/aquota.group +# +# Then, reboot to activate the system. +# To edit user quotas, use 'edquota'. See 'man edquota'. Also, the +# official Quota Mini-HOWTO has lots of useful information. That can be found +# here: /usr/doc/Linux-HOWTOs/Quota + +# Check quotas and then turn quota system on: +if grep -q quota /etc/fstab ; then + for quotafs in $(awk '/quota/ {print $2}' /etc/fstab) ; do + /bin/rm -f $quotafs/{a,}quota.{group,user}.new + done + if [ -x /sbin/quotacheck ]; then + echo "Checking filesystem quotas: /sbin/quotacheck -avugm" + /sbin/quotacheck -avugm + fi + if [ -x /sbin/quotaon ]; then + echo "Activating filesystem quotas: /sbin/quotaon -avug" + /sbin/quotaon -avug + fi +fi + +# Start the SASL authentication server. This provides SASL +# authentication services for sendmail: +if [ -x /etc/rc.d/rc.saslauthd ]; then + . /etc/rc.d/rc.saslauthd start +fi + +# Start the sendmail daemon: +if [ -x /etc/rc.d/rc.sendmail ]; then + . /etc/rc.d/rc.sendmail start +fi + +# Load ALSA (sound) defaults: +if [ -x /etc/rc.d/rc.alsa ]; then + . /etc/rc.d/rc.alsa +fi + +# Load a custom screen font if the user has an rc.font script. +if [ -x /etc/rc.d/rc.font ]; then + . /etc/rc.d/rc.font +fi + +# Load a custom keymap if the user has an rc.keymap script. +if [ -x /etc/rc.d/rc.keymap ]; then + . /etc/rc.d/rc.keymap +fi + +# Start the MySQL database: +if [ -x /etc/rc.d/rc.mysqld ]; then + . /etc/rc.d/rc.mysqld start +fi + +# Start Apache web server: +if [ -x /etc/rc.d/rc.httpd ]; then + . /etc/rc.d/rc.httpd start +fi + +# Start OpenLDAP: +if [ -x /etc/rc.d/rc.openldap ]; then + . /etc/rc.d/rc.openldap start +fi + +# Start Samba (a file/print server for Win95/NT machines). +# Samba can be started in /etc/inetd.conf instead. +if [ -x /etc/rc.d/rc.samba ]; then + . /etc/rc.d/rc.samba start +fi + +# Start the GPM mouse server: +if [ -x /etc/rc.d/rc.gpm ]; then + . /etc/rc.d/rc.gpm start +fi + +# If there are SystemV init scripts for this runlevel, run them. +if [ -x /etc/rc.d/rc.sysvinit ]; then + . /etc/rc.d/rc.sysvinit +fi + +# Start the local setup procedure. +if [ -x /etc/rc.d/rc.local ]; then + . /etc/rc.d/rc.local +fi + +# All done. |