diff options
Diffstat (limited to 'source/a/udev')
33 files changed, 562 insertions, 787 deletions
diff --git a/source/a/udev/config/modprobe.d/8139cp.conf b/source/a/udev/config/modprobe.d/8139cp.conf new file mode 100644 index 00000000..65f0af0d --- /dev/null +++ b/source/a/udev/config/modprobe.d/8139cp.conf @@ -0,0 +1,7 @@ +############################################################################## +# Do not edit this file; instead, copy it to /etc/modprobe.d/ and edit that +############################################################################## + +# Alternate 8139 driver. Some 8139 cards need this specific driver, though... +blacklist 8139cp + diff --git a/source/a/udev/config/modprobe.d/README b/source/a/udev/config/modprobe.d/README new file mode 100644 index 00000000..43355e82 --- /dev/null +++ b/source/a/udev/config/modprobe.d/README @@ -0,0 +1,11 @@ +# /etc/modprobe.d/README +# +# The monolithic "blacklist" file (and others) that used to be here in this +# directory have been split into several more fine-grained files and moved +# to the /lib/modprobe.d/ directory. Any file in /lib/modprobe.d/ will be +# overridden by an identically named file in this directory (/etc/modprobe.d/) +# or /run/modprobe.d/ (but since /run is on a tmpfs, it's not persistent +# across reboots, so you probably don't want to use it). +# +# See "man modprobe.d" for more information. +# diff --git a/source/a/udev/config/modprobe.d/bcm43xx.conf b/source/a/udev/config/modprobe.d/bcm43xx.conf new file mode 100644 index 00000000..55b3c2ab --- /dev/null +++ b/source/a/udev/config/modprobe.d/bcm43xx.conf @@ -0,0 +1,7 @@ +############################################################################## +# Do not edit this file; instead, copy it to /etc/modprobe.d/ and edit that +############################################################################## + +# Deprecated BCM4318 driver. +blacklist bcm43xx + diff --git a/source/a/udev/config/modprobe.d/blacklist.conf.new b/source/a/udev/config/modprobe.d/blacklist.conf.new deleted file mode 100644 index 25811703..00000000 --- a/source/a/udev/config/modprobe.d/blacklist.conf.new +++ /dev/null @@ -1,270 +0,0 @@ -# -# Listing a module here prevents the hotplug scripts from loading it. -# Usually that'd be so that some other driver will bind it instead, -# no matter which driver happens to get probed first. Sometimes user -# mode tools can also control driver binding. - -# PC Speaker support: -# This one is loaded by /etc/rc.d/rc.modules. If you don't like -# the beeps and buzz from speaker, edit /etc/rc.d/rc.modules. -blacklist pcspkr - -# tulip ... de4x5, xircom_tulip_cb, dmfe (...) handle same devices -blacklist de4x5 - -# At least 2.4.3 and later xircom_tulip doesn't have that conflict -# xircom_tulip_cb -blacklist dmfe - -#evbug is a debug tool and should be loaded explicitly -blacklist evbug - -# Alternate Intel EtherExpress Pro/100 support driver. List it -# here so it won't conflict with an already-loaded e100 module. -blacklist eepro100 - -# Alternate 8139 driver. Some 8139 cards need this specific driver, -# though... -blacklist 8139cp - -# Deprecated BCM4318 driver. -blacklist bcm43xx - -# Modules used to run a wireless adaptor as an access point. These -# conflict with the normal driver for the device, and so should be -# loaded manually. -blacklist hostap_cs -blacklist hostap_pci -blacklist hostap_plx -blacklist hostap - -# Ethernet over IEEE1394 module. In too many cases this will load -# when there's no eth1394 device present (just an IEEE1394 port) -blacklist eth1394 - -# This module has also been known to cause crashes with some hardware. -blacklist hw_random - -# The kernel lists this as "experimental", but for now it's "broken" -blacklist via-ircc - -# ALSA modules to support sound modems. These should be loaded manually -# if needed. For most people they just break sound support... -blacklist snd-atiixp-modem -blacklist snd-intel8x0m -blacklist snd-via82xx-modem - -# OSS (Open Sound System) modules. This is the old and deprecated Linux -# sound system. If you want to use OSS, remove the alsa-driver package -# and cut out (or comment out) this list. With these modules -# blacklisted ALSA will load by default. -blacklist ac97 -blacklist ac97_codec -blacklist aci -blacklist ad1816 -blacklist ad1848 -blacklist ad1889 -blacklist adlib_card -blacklist aedsp16 -blacklist ali5455 -blacklist awe_wave -blacklist btaudio -blacklist cmpci -blacklist cs4232 -blacklist cs4281 -blacklist cs46xx -blacklist emu10k1 -blacklist es1370 -blacklist es1371 -blacklist esssolo1 -blacklist forte -blacklist gus -blacklist i810_audio -blacklist kahlua -blacklist mad16 -blacklist maestro -blacklist maestro3 -blacklist maui -blacklist mpu401 -blacklist msnd -blacklist msnd_classic -blacklist msnd_pinnacle -blacklist nm256_audio -blacklist opl3 -blacklist opl3sa -blacklist opl3sa2 -blacklist pas2 -blacklist pss -blacklist rme96xx -blacklist sb -blacklist sb_lib -blacklist sgalaxy -blacklist sonicvibes -blacklist sound -blacklist sscape -blacklist trident -blacklist trix -blacklist uart401 -blacklist uart6850 -blacklist v_midi -blacklist via82cxxx_audio -blacklist wavefront -blacklist ymfpci - -# Hardware specific video framebuffer modules. If the user wants -# these, they can load them manually or de-blacklist them. Having -# them load automatically may lead to funny side effects with -# certain revisions of video hardware. -blacklist arcfb -blacklist aty128fb -blacklist atyfb -blacklist cirrusfb -blacklist clgenfb -blacklist cyber2000fb -blacklist fbcon-cfb2 -blacklist fbcon-cfb4 -blacklist fbcon-hga -blacklist fbcon-mfb -blacklist fbcon-vga-planes -blacklist fbgen -blacklist hgafb -blacklist i2c-matroxfb -blacklist i810fb -blacklist intelfb -blacklist kyrofb -blacklist matroxfb_DAC1064 -blacklist matroxfb_Ti3026 -blacklist matroxfb_accel -blacklist matroxfb_base -blacklist matroxfb_crtc2 -blacklist matroxfb_g450 -blacklist matroxfb_maven -blacklist matroxfb_misc -blacklist neofb -blacklist nvidiafb -blacklist pm2fb -blacklist pm3fb -blacklist radeonfb -blacklist rivafb -blacklist savagefb -blacklist sisfb -blacklist sstfb -blacklist tdfxfb -blacklist tridentfb -blacklist vga16fb - -# SCSI and SATA controller modules. Typically these are either -# built into the kernel or loaded with an initrd already. -blacklist 3w-xxxx -blacklist 53c7,8xx -blacklist AM53C974 -blacklist BusLogic -blacklist NCR53c406a -blacklist a100u2w -blacklist advansys -blacklist aha152x -blacklist aha1542 -blacklist aha1740 -blacklist aic79xx -blacklist aic7xxx -blacklist aic7xxx_old -blacklist aic94xx -blacklist ata_piix -blacklist atp870u -blacklist cpqfc -blacklist dc395x -blacklist dmx3191d -blacklist dpt_i2o -blacklist dtc -blacklist eata -blacklist eata_dma -blacklist eata_pio -blacklist fdomain -blacklist g_NCR5380 -blacklist g_NCR5380_mmio -blacklist gdth -blacklist ide-scsi -blacklist imm -blacklist in2000 -blacklist initio -blacklist ipr -blacklist ips -blacklist libata -blacklist megaraid -blacklist ncr53c8xx -blacklist nsp32 -blacklist osst -blacklist pas16 -blacklist pci2000 -blacklist pci2220i -blacklist ppa -blacklist psi240i -blacklist qla1280 -blacklist qla2100 -blacklist qla2200 -blacklist qla2300 -blacklist qla2322 -blacklist qla2xxx -blacklist qla6312 -blacklist qla6322 -blacklist qlogicfas -blacklist qlogicfas408 -blacklist qlogicfc -blacklist qlogicisp -blacklist seagate -blacklist sim710 -blacklist sata_promise -blacklist sata_sil -blacklist sata_sis -blacklist sata_svw -blacklist sata_sx4 -blacklist sata_via -blacklist sata_vsc -blacklist scsi_debug -blacklist scsi_transport_fc -blacklist scsi_transport_spi -blacklist sym53c416 -blacklist sym53c8xx -blacklist sym53c8xx -blacklist t128 -blacklist tmscsim -blacklist u14-34f - -# Blacklist all watchdog modules. Many motherboards hangs with them and, -# if you really need an watchdog you probably know how to load the module -blacklist acquirewdt -blacklist advantechwdt -blacklist alim1535_wdt -blacklist alim7101_wdt -blacklist cpu5wdt -blacklist eurotechwdt -blacklist hpwdt -blacklist i6300esb -blacklist iTCO_vendor_support -blacklist iTCO_wdt -blacklist ib700wdt -blacklist ibmasr -blacklist it8712f_wdt -blacklist machzwd -blacklist mixcomwd -blacklist pc87413_wdt -blacklist pcwd -blacklist pcwd_pci -blacklist pcwd_usb -blacklist sbc60xxwdt -blacklist sbc7240_wdt -blacklist sbc8360 -blacklist sbc_epx_c3 -blacklist sc1200wdt -blacklist sc520_wdt -blacklist scx200_wdt -blacklist smsc37b787_wdt -blacklist softdog -blacklist w83627hf_wdt -blacklist w83697hf_wdt -blacklist w83877f_wdt -blacklist w83977f_wdt -blacklist wafer5823wdt -blacklist wdt -blacklist wdt_pci - diff --git a/source/a/udev/config/modprobe.d/eepro100.conf b/source/a/udev/config/modprobe.d/eepro100.conf new file mode 100644 index 00000000..a7ca4aae --- /dev/null +++ b/source/a/udev/config/modprobe.d/eepro100.conf @@ -0,0 +1,8 @@ +############################################################################## +# Do not edit this file; instead, copy it to /etc/modprobe.d/ and edit that +############################################################################## + +# Alternate Intel EtherExpress Pro/100 support driver. List it +# here so it won't conflict with an already-loaded e100 module. +blacklist eepro100 + diff --git a/source/a/udev/config/modprobe.d/eth1394.conf b/source/a/udev/config/modprobe.d/eth1394.conf new file mode 100644 index 00000000..a2f475af --- /dev/null +++ b/source/a/udev/config/modprobe.d/eth1394.conf @@ -0,0 +1,8 @@ +############################################################################## +# Do not edit this file; instead, copy it to /etc/modprobe.d/ and edit that +############################################################################## + +# Ethernet over IEEE1394 module. In too many cases this will load +# when there's no eth1394 device present (just an IEEE1394 port) +blacklist eth1394 + diff --git a/source/a/udev/config/modprobe.d/evbug.conf b/source/a/udev/config/modprobe.d/evbug.conf new file mode 100644 index 00000000..0af0a83c --- /dev/null +++ b/source/a/udev/config/modprobe.d/evbug.conf @@ -0,0 +1,7 @@ +############################################################################## +# Do not edit this file; instead, copy it to /etc/modprobe.d/ and edit that +############################################################################## + +#evbug is a debug tool and should be loaded explicitly +blacklist evbug + diff --git a/source/a/udev/config/modprobe.d/framebuffers.conf b/source/a/udev/config/modprobe.d/framebuffers.conf new file mode 100644 index 00000000..770ce420 --- /dev/null +++ b/source/a/udev/config/modprobe.d/framebuffers.conf @@ -0,0 +1,48 @@ +############################################################################## +# Do not edit this file; instead, copy it to /etc/modprobe.d/ and edit that +############################################################################## + +# Hardware specific video framebuffer modules. If the user wants +# these, they can load them manually or de-blacklist them. Having +# them load automatically may lead to funny side effects with +# certain revisions of video hardware. +blacklist arcfb +blacklist aty128fb +blacklist atyfb +blacklist cirrusfb +blacklist clgenfb +blacklist cyber2000fb +blacklist fbcon-cfb2 +blacklist fbcon-cfb4 +blacklist fbcon-hga +blacklist fbcon-mfb +blacklist fbcon-vga-planes +blacklist fbgen +blacklist hgafb +blacklist i2c-matroxfb +blacklist i810fb +blacklist intelfb +blacklist kyrofb +blacklist matroxfb_DAC1064 +blacklist matroxfb_Ti3026 +blacklist matroxfb_accel +blacklist matroxfb_base +blacklist matroxfb_crtc2 +blacklist matroxfb_g450 +blacklist matroxfb_maven +blacklist matroxfb_misc +blacklist neofb +blacklist nvidiafb +blacklist pm2fb +blacklist pm3fb +blacklist radeonfb +blacklist rivafb +blacklist savagefb +blacklist sisfb +blacklist sstfb +blacklist tdfxfb +blacklist tridentfb +blacklist vga16fb +blacklist viafb +blacklist virgefb + diff --git a/source/a/udev/config/modprobe.d/hostap.conf b/source/a/udev/config/modprobe.d/hostap.conf new file mode 100644 index 00000000..4254d3da --- /dev/null +++ b/source/a/udev/config/modprobe.d/hostap.conf @@ -0,0 +1,12 @@ +############################################################################## +# Do not edit this file; instead, copy it to /etc/modprobe.d/ and edit that +############################################################################## + +# Modules used to run a wireless adapter as an access point. These +# conflict with the normal driver for the device, and so should be +# loaded manually. +blacklist hostap_cs +blacklist hostap_pci +blacklist hostap_plx +blacklist hostap + diff --git a/source/a/udev/config/modprobe.d/hw_random.conf b/source/a/udev/config/modprobe.d/hw_random.conf new file mode 100644 index 00000000..b912e012 --- /dev/null +++ b/source/a/udev/config/modprobe.d/hw_random.conf @@ -0,0 +1,7 @@ +############################################################################## +# Do not edit this file; instead, copy it to /etc/modprobe.d/ and edit that +############################################################################## + +# This module has also been known to cause crashes with some hardware. +blacklist hw_random + diff --git a/source/a/udev/config/modprobe.d/isapnp.conf b/source/a/udev/config/modprobe.d/isapnp.conf new file mode 100644 index 00000000..a89ad6bb --- /dev/null +++ b/source/a/udev/config/modprobe.d/isapnp.conf @@ -0,0 +1,24 @@ +############################################################################## +# Do not edit this file; instead, copy it to /etc/modprobe.d/ and edit that +############################################################################## + +# These aliases are here because many PnP modules do not provide them. +# +# NOTE: Commented out due to noise pollution from udev. +# In the unlikely event that your machine needs these aliases, copy this +# file to /etc/modprobe.d/isapnp.conf and uncomment them there. + +#alias pnp:dPNP0400 parport_pc +#alias pnp:dPNP0401 parport_pc +#alias pnp:dPNP0510 irtty-sir +#alias pnp:dPNP0511 irtty-sir +#alias pnp:dPNP0700 floppy +#alias pnp:dPNP0B00 rtc +#alias acpi:PNP0B00: rtc-cmos +#alias acpi:PNP0B01: rtc-cmos +#alias acpi:PNP0B02: rtc-cmos +#alias pnp:dPNPB02F analog +#alias pnp:dPNP0F13 psmouse +#alias pnp:dPNP0800 pcspkr +#alias pnp:dPNP0303 atkbd + diff --git a/source/a/udev/config/modprobe.d/isapnp.conf.new b/source/a/udev/config/modprobe.d/isapnp.conf.new deleted file mode 100644 index 2ed9305e..00000000 --- a/source/a/udev/config/modprobe.d/isapnp.conf.new +++ /dev/null @@ -1,15 +0,0 @@ -# These aliases are here because many PnP modules do not -# provide aliases for them. -alias pnp:dPNP0400 parport_pc -alias pnp:dPNP0401 parport_pc -alias pnp:dPNP0510 irtty-sir -alias pnp:dPNP0511 irtty-sir -alias pnp:dPNP0700 floppy -alias pnp:dPNP0B00 rtc -alias acpi:PNP0B00: rtc-cmos -alias acpi:PNP0B01: rtc-cmos -alias acpi:PNP0B02: rtc-cmos -alias pnp:dPNPB02F analog -alias pnp:dPNP0F13 psmouse -alias pnp:dPNP0800 pcspkr -alias pnp:dPNP0303 atkbd diff --git a/source/a/udev/config/modprobe.d/isdn.conf b/source/a/udev/config/modprobe.d/isdn.conf new file mode 100644 index 00000000..7f736753 --- /dev/null +++ b/source/a/udev/config/modprobe.d/isdn.conf @@ -0,0 +1,11 @@ +############################################################################## +# Do not edit this file; instead, copy it to /etc/modprobe.d/ and edit that +############################################################################## + +# These two come from the hwdata project +# Bug numbers are Fedora/RH specific + +# ISDN - see bugs 154799, 159068 +blacklist hisax +blacklist hisax_fcpcipnp + diff --git a/source/a/udev/config/modprobe.d/oss.conf b/source/a/udev/config/modprobe.d/oss.conf new file mode 100644 index 00000000..52ed2f59 --- /dev/null +++ b/source/a/udev/config/modprobe.d/oss.conf @@ -0,0 +1,61 @@ +############################################################################## +# Do not edit this file; instead, copy it to /etc/modprobe.d/ and edit that +############################################################################## + +# OSS (Open Sound System) modules. This is the old and deprecated Linux +# sound system. If you want to use OSS, remove the alsa-driver package +# and cut out (or comment out) this list. With these modules +# blacklisted ALSA will load by default. +blacklist ac97 +blacklist ac97_codec +blacklist aci +blacklist ad1816 +blacklist ad1848 +blacklist ad1889 +blacklist adlib_card +blacklist aedsp16 +blacklist ali5455 +blacklist awe_wave +blacklist btaudio +blacklist cmpci +blacklist cs4232 +blacklist cs4281 +blacklist cs46xx +blacklist emu10k1 +blacklist es1370 +blacklist es1371 +blacklist esssolo1 +blacklist forte +blacklist gus +blacklist i810_audio +blacklist kahlua +blacklist mad16 +blacklist maestro +blacklist maestro3 +blacklist maui +blacklist mpu401 +blacklist msnd +blacklist msnd_classic +blacklist msnd_pinnacle +blacklist nm256_audio +blacklist opl3 +blacklist opl3sa +blacklist opl3sa2 +blacklist pas2 +blacklist pss +blacklist rme96xx +blacklist sb +blacklist sb_lib +blacklist sgalaxy +blacklist sonicvibes +blacklist sound +blacklist sscape +blacklist trident +blacklist trix +blacklist uart401 +blacklist uart6850 +blacklist v_midi +blacklist via82cxxx_audio +blacklist wavefront +blacklist ymfpci + diff --git a/source/a/udev/config/modprobe.d/pcspkr.conf b/source/a/udev/config/modprobe.d/pcspkr.conf new file mode 100644 index 00000000..66de6b74 --- /dev/null +++ b/source/a/udev/config/modprobe.d/pcspkr.conf @@ -0,0 +1,9 @@ +############################################################################## +# Do not edit this file; instead, copy it to /etc/modprobe.d/ and edit that +############################################################################## + +# PC Speaker support: +# This one is loaded by /etc/rc.d/rc.modules. If you don't like +# the beeps and buzz from speaker, edit /etc/rc.d/rc.modules. +blacklist pcspkr + diff --git a/source/a/udev/config/modprobe.d/psmouse.conf.new b/source/a/udev/config/modprobe.d/psmouse.conf index 70c0d819..cc414141 100644 --- a/source/a/udev/config/modprobe.d/psmouse.conf.new +++ b/source/a/udev/config/modprobe.d/psmouse.conf @@ -1,3 +1,7 @@ +############################################################################## +# Do not edit this file; instead, copy it to /etc/modprobe.d/ and edit that +############################################################################## + # PS/2 mouse support: # The default options when the psmouse module can cause problems with KVM # switches. If you experience this, you may want to uncomment the line diff --git a/source/a/udev/config/modprobe.d/scsi-sata-controllers.conf b/source/a/udev/config/modprobe.d/scsi-sata-controllers.conf new file mode 100644 index 00000000..61470416 --- /dev/null +++ b/source/a/udev/config/modprobe.d/scsi-sata-controllers.conf @@ -0,0 +1,81 @@ +############################################################################## +# Do not edit this file; instead, copy it to /etc/modprobe.d/ and edit that +############################################################################## + +# SCSI and SATA controller modules. Typically these are either +# built into the kernel or loaded with an initrd already. +blacklist 3w-xxxx +blacklist 53c7,8xx +blacklist AM53C974 +blacklist BusLogic +blacklist NCR53c406a +blacklist a100u2w +blacklist advansys +blacklist aha152x +blacklist aha1542 +blacklist aha1740 +blacklist aic79xx +blacklist aic7xxx +blacklist aic7xxx_old +blacklist aic94xx +blacklist ata_piix +blacklist atp870u +blacklist cpqfc +blacklist dc395x +blacklist dmx3191d +blacklist dpt_i2o +blacklist dtc +blacklist eata +blacklist eata_dma +blacklist eata_pio +blacklist fdomain +blacklist g_NCR5380 +blacklist g_NCR5380_mmio +blacklist gdth +blacklist ide-scsi +blacklist imm +blacklist in2000 +blacklist initio +blacklist ipr +blacklist ips +blacklist libata +blacklist megaraid +blacklist ncr53c8xx +blacklist nsp32 +blacklist osst +blacklist pas16 +blacklist pci2000 +blacklist pci2220i +blacklist ppa +blacklist psi240i +blacklist qla1280 +blacklist qla2100 +blacklist qla2200 +blacklist qla2300 +blacklist qla2322 +blacklist qla2xxx +blacklist qla6312 +blacklist qla6322 +blacklist qlogicfas +blacklist qlogicfas408 +blacklist qlogicfc +blacklist qlogicisp +blacklist seagate +blacklist sim710 +blacklist sata_promise +blacklist sata_sil +blacklist sata_sis +blacklist sata_svw +blacklist sata_sx4 +blacklist sata_via +blacklist sata_vsc +blacklist scsi_debug +blacklist scsi_transport_fc +blacklist scsi_transport_spi +blacklist sym53c416 +blacklist sym53c8xx +blacklist sym53c8xx +blacklist t128 +blacklist tmscsim +blacklist u14-34f + diff --git a/source/a/udev/config/modprobe.d/sound-modems.conf b/source/a/udev/config/modprobe.d/sound-modems.conf new file mode 100644 index 00000000..f458346d --- /dev/null +++ b/source/a/udev/config/modprobe.d/sound-modems.conf @@ -0,0 +1,10 @@ +############################################################################## +# Do not edit this file; instead, copy it to /etc/modprobe.d/ and edit that +############################################################################## + +# ALSA modules to support sound modems. These should be loaded manually +# if needed. For most people they just break sound support... +blacklist snd-atiixp-modem +blacklist snd-intel8x0m +blacklist snd-via82xx-modem + diff --git a/source/a/udev/config/modprobe.d/tulip.conf b/source/a/udev/config/modprobe.d/tulip.conf new file mode 100644 index 00000000..64b6a5ca --- /dev/null +++ b/source/a/udev/config/modprobe.d/tulip.conf @@ -0,0 +1,11 @@ +############################################################################## +# Do not edit this file; instead, copy it to /etc/modprobe.d/ and edit that +############################################################################## + +# tulip ... de4x5, xircom_tulip_cb, dmfe (...) handle same devices +blacklist de4x5 + +# At least 2.4.3 and later xircom_tulip doesn't have that conflict +# xircom_tulip_cb +blacklist dmfe + diff --git a/source/a/udev/config/modprobe.d/usb-controller.conf b/source/a/udev/config/modprobe.d/usb-controller.conf new file mode 100644 index 00000000..f5e4e502 --- /dev/null +++ b/source/a/udev/config/modprobe.d/usb-controller.conf @@ -0,0 +1,9 @@ +############################################################################## +# Do not edit this file; instead, copy it to /etc/modprobe.d/ and edit that +############################################################################## + +# The EHCI driver should be loaded before the ones for low speed controllers +# or some devices may be confused when they are disconnected and reconnected. +softdep uhci-hcd pre: ehci-hcd +softdep ohci-hcd pre: ehci-hcd + diff --git a/source/a/udev/config/modprobe.d/usb-controller.conf.new b/source/a/udev/config/modprobe.d/usb-controller.conf.new deleted file mode 100644 index 4b77fd82..00000000 --- a/source/a/udev/config/modprobe.d/usb-controller.conf.new +++ /dev/null @@ -1,4 +0,0 @@ -# Make sure that ehci-hcd is always loaded before uhci-hci -# # or ohci-hcd to prevent a kernel warning: -install uhci-hcd /sbin/modprobe ehci-hcd ; /sbin/modprobe -i uhci-hcd -install ohci-hcd /sbin/modprobe ehci-hcd ; /sbin/modprobe -i ohci-hcd diff --git a/source/a/udev/config/modprobe.d/via-ircc.conf b/source/a/udev/config/modprobe.d/via-ircc.conf new file mode 100644 index 00000000..3dfa5731 --- /dev/null +++ b/source/a/udev/config/modprobe.d/via-ircc.conf @@ -0,0 +1,7 @@ +############################################################################## +# Do not edit this file; instead, copy it to /etc/modprobe.d/ and edit that +############################################################################## + +# The kernel lists this as "experimental", but for now it's "broken" +blacklist via-ircc + diff --git a/source/a/udev/config/modprobe.d/watchdog.conf b/source/a/udev/config/modprobe.d/watchdog.conf new file mode 100644 index 00000000..66d1f837 --- /dev/null +++ b/source/a/udev/config/modprobe.d/watchdog.conf @@ -0,0 +1,43 @@ +############################################################################## +# Do not edit this file; instead, copy it to /etc/modprobe.d/ and edit that +############################################################################## + +# Blacklist all watchdog modules. Many motherboards hang with them, and +# if you really need a watchdog, you probably know how to load the module +blacklist acquirewdt +blacklist advantechwdt +blacklist alim1535_wdt +blacklist alim7101_wdt +blacklist cpu5wdt +blacklist eurotechwdt +blacklist hpwdt +blacklist i6300esb +blacklist i8xx_tco +blacklist iTCO_vendor_support +blacklist iTCO_wdt +blacklist ib700wdt +blacklist ibmasr +blacklist it8712f_wdt +blacklist machzwd +blacklist mixcomwd +blacklist pc87413_wdt +blacklist pcwd +blacklist pcwd_pci +blacklist pcwd_usb +blacklist sbc60xxwdt +blacklist sbc7240_wdt +blacklist sbc8360 +blacklist sbc_epx_c3 +blacklist sc1200wdt +blacklist sc520_wdt +blacklist scx200_wdt +blacklist smsc37b787_wdt +blacklist softdog +blacklist w83627hf_wdt +blacklist w83697hf_wdt +blacklist w83877f_wdt +blacklist w83977f_wdt +blacklist wafer5823wdt +blacklist wdt +blacklist wdt_pci + diff --git a/source/a/udev/config/rc.d/rc.udev.new b/source/a/udev/config/rc.d/rc.udev.new index 6a6218f6..2bbd9819 100644 --- a/source/a/udev/config/rc.d/rc.udev.new +++ b/source/a/udev/config/rc.d/rc.udev.new @@ -4,7 +4,6 @@ # appropriate kernel modules, and configures the devices. PATH="/sbin:/bin" -OPT="" . /etc/udev/udev.conf @@ -25,26 +24,38 @@ mount_devpts() { case "$1" in start) - # Sanity check #1, udev requires that the kernel support tmpfs: + # Sanity check #1, udev requires that the kernel support devtmpfs: + if ! grep -wq devtmpfs /proc/filesystems ; then + echo "Sorry, but you need devtmpfs support in the kernel to use udev." + echo "Both of these options are needed: CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y" + echo + echo "FATAL: Refusing to run /etc/rc.d/rc.udev." + sleep 10 + exit 1 + fi + + # Sanity check #2, udev requires that the kernel support tmpfs: if ! grep -wq tmpfs /proc/filesystems ; then echo "Sorry, but you need tmpfs support in the kernel to use udev." echo echo "FATAL: Refusing to run /etc/rc.d/rc.udev." + sleep 10 exit 1 fi - # Sanity check #2, make sure that a 2.6.x kernel is new enough: + # Sanity check #3, make sure that a 2.6.x kernel is new enough: if [ "$(uname -r | cut -f 1,2 -d .)" = "2.6" ]; then if [ "$(uname -r | cut -f 3 -d . | sed 's/[^[:digit:]].*//')" -lt "32" ]; then echo "Sorry, but you need a 2.6.32+ kernel to use this udev." echo "Your kernel version is only $(uname -r)." echo echo "FATAL: Refusing to run /etc/rc.d/rc.udev." + sleep 10 exit 1 fi fi - # Sanity check #3, make sure the udev package was not removed. If udevd + # Sanity check #4, make sure the udev package was not removed. If udevd # is not there, this will also shut off this script to prevent further # problems: if [ ! -x /sbin/udevd ]; then @@ -52,6 +63,7 @@ case "$1" in echo "No udevd daemon found." echo "Turning off udev: chmod 644 /etc/rc.d/rc.udev" echo "FATAL: Refusing to run /etc/rc.d/rc.udev." + sleep 10 exit 1 fi @@ -90,47 +102,41 @@ case "$1" in # Mount devpts mount_devpts - # Start udevd. - /sbin/udevd --daemon 2>/dev/null - - # If udevd was already running, then it will return !=0 exit code, - # so we'll try to re-run failed events - if [ $? != 0 ]; then - OPT="--type=failed $OPT" - ( cd ${UDEV_ROOT}/.udev - for TMPFILE in tmp-rules-*.rules ; do - mv $TMPFILE /etc/udev/rules.d/${TMPFILE/tmp-rules--/} 2>/dev/null - done - ) - else # udev is just now being started, so we'll do some initial setup: - - # Create rootdev rules - DEVICENUMBER=$( /bin/stat -c %d / ) - MAJORNUMBER=$(($DEVICENUMBER / 256)) - MINORNUMBER=$(($DEVICENUMBER % 256)) - - echo 'ACTION!="remove", SUBSYSTEM=="block", ENV{MAJOR}=="'$MAJORNUMBER'", ENV{MINOR}=="'$MINORNUMBER'", SYMLINK+="root"' > /dev/.udev/rules.d/61-dev-root-link.rules - - # Set OPT="--action=add" to generate add events on coldplug - OPT="--action=add" - - fi - - echo "Triggering udev events: /sbin/udevadm trigger $OPT" - # Call udevtrigger and udevsettle to do the device configuration: - /sbin/udevadm trigger $OPT && /sbin/udevadm settle --timeout=120 - - ;; + if ! /sbin/pidof udevd 1>/dev/null 2>/dev/null; then # start udevd + echo "Starting udevd: /sbin/udevd --daemon" + /sbin/udevd --daemon + # Since udev is just now being started we want to use add events: + echo "Triggering udev events: /sbin/udevadm trigger --action=add" + # Call udevtrigger and udevsettle to do the device configuration: + /sbin/udevadm trigger --type=subsystems --action=add + /sbin/udevadm trigger --type=devices --action=add + else # trigger changes for already running udevd + # If the persistent rules files do not exist, trigger an add event: + if [ ! -r /etc/udev/rules.d/70-persistent-net.rules ]; then + # Test that we can actually write to the directory first: + if touch /etc/udev/rules.d/testfile 2> /dev/null ; then + rm -f /etc/udev/rules.d/testfile + # This should add persistent net/cd rules: + echo "Triggering udev to write persistent rules to /etc/udev/rules.d/" + /sbin/udevadm trigger --type=devices --action=add + sleep 3 + fi + fi + # Since udevd is running, most of the time we only need change events: + echo "Triggering udev events: /sbin/udevadm trigger --action=change" + /sbin/udevadm trigger --type=subsystems --action=change + /sbin/udevadm trigger --type=devices --action=change + fi + /sbin/udevadm settle --timeout=120 + ;; stop) echo "Stopping udevd is STRONGLY discouraged and not supported." echo "If you are sure you want to do this, use 'force-stop' instead." ;; force-stop) echo "Stopping udevd" - if [ -e /proc/sys/kernel/hotplug ]; then - echo /sbin/hotplug > /proc/sys/kernel/hotplug - fi - killall udevd + udevadm control --exit + killall udevd 2>/dev/null ;; restart) echo "Restarting udevd is STRONGLY discouraged and not supported." @@ -138,18 +144,18 @@ case "$1" in ;; force-restart) echo "Restarting udevd" - killall udevd - sleep 5 + udevadm control --exit + sleep 3 udevd --daemon ;; reload) echo "Reloading udev rules" - udevadm control --reload-rules + udevadm control --reload cp --preserve=all --recursive --update /lib/udev/devices/* $UDEV_ROOT ;; force-reload) echo "Updating all available device nodes in $UDEV_ROOT" - udevadm control --reload-rules + udevadm control --reload rm -rf $UDEV_ROOT/.udev $UDEV_ROOT/disk cp --preserve=all --recursive --update /lib/udev/devices/* $UDEV_ROOT ;; diff --git a/source/a/udev/config/rules.d/40-slackware.rules b/source/a/udev/config/rules.d/40-slackware.rules index 6883f526..9e8c6342 100644 --- a/source/a/udev/config/rules.d/40-slackware.rules +++ b/source/a/udev/config/rules.d/40-slackware.rules @@ -17,3 +17,6 @@ KERNEL=="mice", SYMLINK+="mouse" # Set rfkill device writable by netdev group KERNEL=="rfkill", GROUP:="netdev", MODE:="0664" +# Mount fusectl filesystem +KERNEL=="fuse", ACTION=="add", RUN+="/bin/mount -t fusectl fusectl /sys/fs/fuse/connections" + diff --git a/source/a/udev/config/rules.d/90-network.rules b/source/a/udev/config/rules.d/90-network.rules deleted file mode 100644 index 03f2ddc7..00000000 --- a/source/a/udev/config/rules.d/90-network.rules +++ /dev/null @@ -1,5 +0,0 @@ -# This file will be overwritten in next upgrade. Please put your -# custom rules somewhere else (90-local.rules is a good idea) - -SUBSYSTEM=="net", NAME=="?*", ACTION=="add", RUN+="nethelper.sh $env{INTERFACE} start" -SUBSYSTEM=="net", NAME=="?*", ACTION=="remove", RUN+="nethelper.sh $env{INTERFACE} stop" diff --git a/source/a/udev/config/scripts/nethelper.sh b/source/a/udev/config/scripts/nethelper.sh deleted file mode 100755 index 9e172027..00000000 --- a/source/a/udev/config/scripts/nethelper.sh +++ /dev/null @@ -1,62 +0,0 @@ -#!/bin/sh -DEVNAME="$1" -COMMAND="$2" - -testwrite() { - if touch /var/run/checkrw 2>/dev/null ; then - rm -rf /var/run/checkrw - RW=1 - fi -} - -case $DEVNAME in - eth*|ath*|wlan*|ra*|sta*|ctc*|lcs*|hsi*) - case $COMMAND in - 'start') - testwrite - - if [ $RW ]; then - if [ -x /etc/rc.d/rc.inet1 ]; then - if ! /sbin/ifconfig | /bin/grep -q "^${DEVNAME} "; then - /etc/rc.d/rc.inet1 ${DEVNAME}_start - fi - fi - exit 0 - else - exit 1 - fi - ;; - 'stop') - if [ -x /etc/rc.d/rc.inet1 ]; then - if /sbin/ifconfig | /bin/grep -q "^${DEVNAME} "; then - /etc/rc.d/rc.inet1 ${DEVNAME}_stop - fi - fi - # Does dhcpcd appear to still be running on the - # interface? If so, try to stop it. - if [ -r /etc/dhcpc/dhcpcd-$DEVNAME.pid -o -r /var/run/dhcpcd-$DEVNAME.pid ]; then - /sbin/dhcpcd -k -d $DEVNAME - # Force garbage removal, if needed: - if [ -r /etc/dhcpc/dhcpcd-$DEVNAME.pid ]; then - /bin/rm -f /etc/dhcpc/dhcpcd-$DEVNAME.pid - elif [ -r /var/run/dhcpcd-$DEVNAME.pid ]; then - /bin/rm -f /var/run/dhcpcd-$DEVNAME.pid - fi - fi - # If the interface is now down, exit with a status of 0: - if /sbin/ifconfig | /bin/grep -q "^${DEVNAME} " ; then - exit 0 - fi - ;; - *) - echo "usage $0 interface start|stop" - exit 1 - ;; - esac - ;; - *) - echo "Interface $DEVNAME not supported." - exit 1 - ;; -esac -exit 0 diff --git a/source/a/udev/doinst.sh b/source/a/udev/doinst.sh index 5b7f5f90..2912e5c8 100644 --- a/source/a/udev/doinst.sh +++ b/source/a/udev/doinst.sh @@ -25,17 +25,12 @@ fi # This should catch *all* files in /etc/modprobe.d/ and move them over to # have .conf extensions for modfile in $(ls etc/modprobe.d/ | grep -v "\.\(conf\|bak\|orig\|new\)"); do - if [ -e etc/modprobe.d/$modfile -a ! -e etc/modprobe.d/$modfile.conf ]; then + if [ "$modfile" = README ]; then + true # do nothing + elif [ -e etc/modprobe.d/$modfile -a ! -e etc/modprobe.d/$modfile.conf ]; then mv etc/modprobe.d/$modfile etc/modprobe.d/$modfile.conf elif [ -e etc/modprobe.d/$modfile -a -e etc/modprobe.d/$modfile.conf ]; then mv etc/modprobe.d/$modfile etc/modprobe.d/$modfile.bak fi done -config etc/modprobe.d/blacklist.conf.new -config etc/modprobe.d/isapnp.conf.new -config etc/modprobe.d/psmouse.conf.new -config etc/modprobe.d/usb-controller.conf.new - -/sbin/udevadm info --convert-db 1>/dev/null 2>/dev/null - diff --git a/source/a/udev/fix-42-usb-hid-pm.rules.diff b/source/a/udev/fix-42-usb-hid-pm.rules.diff new file mode 100644 index 00000000..2a1d529f --- /dev/null +++ b/source/a/udev/fix-42-usb-hid-pm.rules.diff @@ -0,0 +1,18 @@ +diff -u -r --new-file udev-182.orig/rules/42-usb-hid-pm.rules udev-182/rules/42-usb-hid-pm.rules +--- udev-182.orig/rules/42-usb-hid-pm.rules 2012-03-12 16:40:40.569534100 -0500 ++++ udev-182/rules/42-usb-hid-pm.rules 2012-09-10 13:36:44.171054934 -0500 +@@ -43,7 +43,13 @@ + ACTION=="add", SUBSYSTEM=="usb", ATTRS{idVendor}=="04b3", ATTR{idProduct}=="4012", TEST=="power/control", ATTR{power/control}="auto" + + # Raritan Computer, Inc KVM. +-ACTION=="add", SUBSYSTEM=="usb", ATTR{idVendor}=="14dd", ATTR{idProduct}="0002", TEST=="power/control", ATTR{power/control}="auto" ++ACTION=="add", SUBSYSTEM=="usb", ATTR{idVendor}=="14dd", ATTR{idProduct}=="0002", TEST=="power/control", ATTR{power/control}="auto" + + # USB HID devices that are internal to the machine should also be safe to autosuspend ++ ++ACTION=="add", SUBSYSTEM=="usb", SUBSYSTEMS=="usb", ATTRS{removable}=="removable", GOTO="usb_hid_pm_end" ++ACTION=="add", SUBSYSTEM=="usb", SUBSYSTEMS=="usb", ATTRS{removable}=="unknown", GOTO="usb_hid_pm_end" ++ + ACTION=="add", SUBSYSTEM=="usb", ATTR{bInterfaceClass}=="03", ATTRS{removable}=="fixed", TEST=="../power/control", ATTR{../power/control}="auto" ++ ++LABEL="usb_hid_pm_end" diff --git a/source/a/udev/rule_generator.diff b/source/a/udev/rule_generator.diff index 212c09f1..25c72b84 100644 --- a/source/a/udev/rule_generator.diff +++ b/source/a/udev/rule_generator.diff @@ -1,6 +1,6 @@ -diff -Nur udev-159.orig//extras/rule_generator/write_cd_rules udev-159/extras/rule_generator/write_cd_rules ---- udev-159.orig//extras/rule_generator/write_cd_rules 2010-06-25 04:37:36.000000000 -0500 -+++ udev-159/extras/rule_generator/write_cd_rules 2010-07-07 02:44:14.501947041 -0500 +diff -Nur udev-182.orig/src/rule_generator/write_cd_rules udev-182/src/rule_generator/write_cd_rules +--- udev-182.orig/src/rule_generator/write_cd_rules 2012-03-24 22:47:53.138527732 -0500 ++++ udev-182/src/rule_generator/write_cd_rules 2012-03-24 22:59:42.595889830 -0500 @@ -3,7 +3,8 @@ # This script is run if an optical drive lacks a rule for persistent naming. # @@ -21,58 +21,58 @@ diff -Nur udev-159.orig//extras/rule_generator/write_cd_rules udev-159/extras/ru comment="$ID_MODEL ($ID_PATH)" - - write_rule "$match" "cdrom$link_num" "$comment" + write_rule "$match" "cdrom$link_num" "$comment" -[ "$ID_CDROM_CD_R" -o "$ID_CDROM_CD_RW" ] && \ -- write_rule "$match" "cdrw$link_num" +- write_rule "$match" "cdrw$link_num" -[ "$ID_CDROM_DVD" ] && \ -- write_rule "$match" "dvd$link_num" +- write_rule "$match" "dvd$link_num" -[ "$ID_CDROM_DVD_R" -o "$ID_CDROM_DVD_RW" -o "$ID_CDROM_DVD_RAM" ] && \ -- write_rule "$match" "dvdrw$link_num" -+ if [ "$(find_all_rules 'SYMLINK+=' cdrom)" = "" ]; then -+ write_rule "$match" "cdrom" -+ fi +- write_rule "$match" "dvdrw$link_num" ++ if [ "$(find_all_rules 'SYMLINK+=' cdrom)" = "" ]; then ++ write_rule "$match" "cdrom" ++ fi + -+ if [ "$ID_CDROM_CD_R" ]; then -+ write_rule "$match" "cdr$link_num" -+ if [ "$(find_all_rules 'SYMLINK+=' cdr)" = "" ]; then -+ write_rule "$match" "cdr" -+ fi ++ if [ "$ID_CDROM_CD_R" ]; then ++ write_rule "$match" "cdr$link_num" ++ if [ "$(find_all_rules 'SYMLINK+=' cdr)" = "" ]; then ++ write_rule "$match" "cdr" ++ fi + -+ write_rule "$match" "cdwriter$link_num" -+ if [ "$(find_all_rules 'SYMLINK+=' cdwriter)" = "" ]; then -+ write_rule "$match" "cdwriter" -+ fi ++ write_rule "$match" "cdwriter$link_num" ++ if [ "$(find_all_rules 'SYMLINK+=' cdwriter)" = "" ]; then ++ write_rule "$match" "cdwriter" ++ fi + -+ if [ "$ID_CDROM_CD_RW" ]; then -+ write_rule "$match" "cdrw$link_num" -+ if [ "$(find_all_rules 'SYMLINK+=' cdrw)" = "" ]; then -+ write_rule "$match" "cdrw" -+ fi -+ fi ++ if [ "$ID_CDROM_CD_RW" ]; then ++ write_rule "$match" "cdrw$link_num" ++ if [ "$(find_all_rules 'SYMLINK+=' cdrw)" = "" ]; then ++ write_rule "$match" "cdrw" ++ fi ++ fi + -+ if [ "$(find_all_rules 'SYMLINK+=' writer)" = "" ]; then -+ write_rule "$match" "writer" -+ fi -+ fi ++ if [ "$(find_all_rules 'SYMLINK+=' writer)" = "" ]; then ++ write_rule "$match" "writer" ++ fi ++ fi + -+ if [ "$ID_CDROM_DVD" ]; then -+ write_rule "$match" "dvd$link_num" -+ if [ "$(find_all_rules 'SYMLINK+=' dvd)" = "" ]; then -+ write_rule "$match" "dvd" -+ fi ++ if [ "$ID_CDROM_DVD" ]; then ++ write_rule "$match" "dvd$link_num" ++ if [ "$(find_all_rules 'SYMLINK+=' dvd)" = "" ]; then ++ write_rule "$match" "dvd" ++ fi + -+ if [ "$ID_CDROM_DVD_R" -o "$ID_CDROM_DVD_RW" -o "$ID_CDROM_DVD_RAM" ]; then -+ write_rule "$match" "dvdrw$link_num" -+ if [ "$(find_all_rules 'SYMLINK+=' dvdrw)" = "" ]; then -+ write_rule "$match" "dvdrw" -+ fi ++ if [ "$ID_CDROM_DVD_R" -o "$ID_CDROM_DVD_RW" -o "$ID_CDROM_DVD_RAM" ]; then ++ write_rule "$match" "dvdrw$link_num" ++ if [ "$(find_all_rules 'SYMLINK+=' dvdrw)" = "" ]; then ++ write_rule "$match" "dvdrw" ++ fi + -+ write_rule "$match" "dvdwriter$link_num" -+ if [ "$(find_all_rules 'SYMLINK+=' dvdwriter)" = "" ]; then -+ write_rule "$match" "dvdwriter" -+ fi -+ fi -+ fi ++ write_rule "$match" "dvdwriter$link_num" ++ if [ "$(find_all_rules 'SYMLINK+=' dvdwriter)" = "" ]; then ++ write_rule "$match" "dvdwriter" ++ fi ++ fi ++ fi echo >> $RULES_FILE unlock_rules_file diff --git a/source/a/udev/udev-ata_id-fixup-all-8-not-only-6-bytes-of-the-fw_rev.patch b/source/a/udev/udev-ata_id-fixup-all-8-not-only-6-bytes-of-the-fw_rev.patch new file mode 100644 index 00000000..bfa0c76a --- /dev/null +++ b/source/a/udev/udev-ata_id-fixup-all-8-not-only-6-bytes-of-the-fw_rev.patch @@ -0,0 +1,27 @@ +Adapted from the following patch (path and actual line number changes): + +From daa9cf546ce7265645ced9592dd54c6b2fc04302 Mon Sep 17 00:00:00 2001 +From: Kay Sievers <kay@vrfy.org> +Date: Thu, 5 Jul 2012 16:53:08 +0200 +Subject: [PATCH] udev: ata_id - fixup all 8 not only 6 bytes of the fw_rev + string + +The last two digits are in the wrong order: + $ hdparm -I /dev/sda | grep Revision + 4PC10362 + + $ /lib/udev/ata_id -x /dev/sda | grep REVISION + 4PC10326 + +diff -Nur udev-182.orig/src/ata_id/ata_id.c udev-182/src/ata_id/ata_id.c +--- udev-182.orig/src/ata_id/ata_id.c 2012-03-13 19:00:51.220734316 -0500 ++++ udev-182/src/ata_id/ata_id.c 2012-07-14 19:48:34.224478831 -0500 +@@ -511,7 +511,7 @@ + * use and copy it into the hd_driveid struct for convenience + */ + disk_identify_fixup_string (identify, 10, 20); /* serial */ +- disk_identify_fixup_string (identify, 23, 6); /* fwrev */ ++ disk_identify_fixup_string (identify, 23, 8); /* fwrev */ + disk_identify_fixup_string (identify, 27, 40); /* model */ + disk_identify_fixup_uint16 (identify, 0); /* configuration */ + disk_identify_fixup_uint16 (identify, 75); /* queue depth */ diff --git a/source/a/udev/udev.SlackBuild b/source/a/udev/udev.SlackBuild index c6f83a0e..183c6667 100755 --- a/source/a/udev/udev.SlackBuild +++ b/source/a/udev/udev.SlackBuild @@ -1,6 +1,6 @@ #!/bin/sh -# Copyright 2006, 2008, 2009, 2010, 2011 Patrick J. Volkerding, Sebeka, MN, USA +# Copyright 2006, 2008, 2009, 2010, 2011, 2012 Patrick J. Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -21,7 +21,7 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. VERSION=${VERSION:-$(echo udev-*.tar.* | cut -d - -f 2 | rev | cut -f 3- -d . | rev)} -BUILD=${BUILD:-2} +BUILD=${BUILD:-5} NUMJOBS=${NUMJOBS:-" -j7 "} @@ -58,29 +58,35 @@ find . \ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ -exec chmod 644 {} \; -# So this is a major bug. At least, it triggers one in the kernel. -# We'll revert it for now. If left in place, machines using ATA -# (especially PATA) are liable to randomly crash on reboot. -# The last little bit of this patch fails to reverse but it won't matter. -if [ $VERSION = 165 ]; then - zcat $CWD/udev.git-560de575148b7efda3b34a7f7073abd483c5f08e.patch.gz | patch -p1 -R -fi +# Fix ata_id (remove with udev-186+) +zcat $CWD/udev-ata_id-fixup-all-8-not-only-6-bytes-of-the-fw_rev.patch.gz | patch -p1 || exit 1 + +# Fix 42-usb-hid-pm.rules (remove with udev-187+) +zcat $CWD/fix-42-usb-hid-pm.rules.diff.gz | patch -p1 --verbose || exit 1 # Fixup the rule generator for our use -zcat $CWD/rule_generator.diff.gz | patch -p1 || exit 1 +zcat $CWD/rule_generator.diff.gz | patch -p1 --verbose || exit 1 # static libudev is needed for lvm2 +# --enable-udev_acl was removed (will be part of future CK release) +# --enable-floppy support was also disabled by default in 173 +# --enable-rule_generator was disabled by default in 175 ./configure \ - --enable-static \ --prefix=/usr \ - --sysconfdir=/etc \ - --sbindir=/sbin \ + --with-rootprefix=/ \ --libdir=/usr/lib${LIBDIRSUFFIX} \ --with-rootlibdir=/lib${LIBDIRSUFFIX} \ - --libexecdir=/lib/udev \ - --disable-introspection \ + --with-firmware-path=/lib/firmware/updates:/lib/firmware \ + --sysconfdir=/etc \ + --bindir=/sbin \ + --sbindir=/sbin \ + --libexecdir=/lib \ + --enable-introspection \ --mandir=/usr/man \ --docdir=/usr/doc/udev-$VERSION \ + --enable-floppy \ + --enable-static \ + --enable-rule_generator \ --build=$ARCH-slackware-linux || exit 1 make $NUMJOBS || make || exit 1 @@ -92,8 +98,13 @@ find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ # scsi_id is needed by multipath ( cd $PKG/sbin ; ln -s ../lib/udev/scsi_id scsi_id ) +# Put udevd back in /sbin +mv $PKG/lib/udev/udevd $PKG/sbin +ln -s /sbin/udevd $PKG/lib/udev/udevd + mkdir -p \ - $PKG/etc/modprobe.d \ + $PKG/run \ + $PKG/{etc,lib}/modprobe.d \ $PKG/etc/rc.d \ $PKG/etc/udev/rules.d \ $PKG/lib/firmware @@ -106,32 +117,23 @@ cp -a $CWD/config/rules.d/* $PKG/lib/udev/rules.d/ # Now the init script and module-init-tools stuff cp -a $CWD/config/rc.d/rc.udev.new $PKG/etc/rc.d/rc.udev.new -cp -a $CWD/config/modprobe.d/* $PKG/etc/modprobe.d +cp -a $CWD/config/modprobe.d/*.conf $PKG/lib/modprobe.d/ +cp -a $CWD/config/modprobe.d/README $PKG/etc/modprobe.d/ -chown -R root:root $PKG/etc -find $PKG/etc -type f -exec chmod 644 {} \; +chown -R root:root $PKG/etc $PKG/lib/modprobe.d +find $PKG/etc $PKG/lib/modprobe.d -type f -exec chmod 644 {} \; find $PKG/etc -type d -exec chmod 755 {} \; chmod 0755 $PKG/etc/rc.d/rc.udev.new # Add extra device nodes to the package that udev doesn't make: -# As of 156, some of these aren't be needed any more: -# removed core@ fd@ stderr@ stdin@ stdout@ tar xvf $CWD/udev-fixed-devices.tar.gz -C $PKG -# Add various helper scripts: -for file in $CWD/config/scripts/* ; do - cp -a $file $PKG/lib/udev/ -done chown -R root:root $PKG/lib/udev chmod 0755 $PKG/lib/udev/* -# Move the pkgconfig file to where we expect it -mv $PKG/usr/share/pkgconfig/* $PKG/usr/lib${LIBDIRSUFFIX}/pkgconfig -rmdir $PKG/usr/share/pkgconfig - mkdir -p $PKG/usr/doc/udev-$VERSION cp -a \ - COPYING* README* TODO extras/keymap/README.keymap.txt \ + COPYING* README* TODO \ $PKG/usr/doc/udev-$VERSION # Don't package the API docs: diff --git a/source/a/udev/udev.git-560de575148b7efda3b34a7f7073abd483c5f08e.patch b/source/a/udev/udev.git-560de575148b7efda3b34a7f7073abd483c5f08e.patch deleted file mode 100644 index fc991b9a..00000000 --- a/source/a/udev/udev.git-560de575148b7efda3b34a7f7073abd483c5f08e.patch +++ /dev/null @@ -1,305 +0,0 @@ -From 560de575148b7efda3b34a7f7073abd483c5f08e Mon Sep 17 00:00:00 2001 -From: David Zeuthen <davidz@redhat.com> -Date: Thu, 4 Nov 2010 08:55:58 -0400 -Subject: [PATCH 1/1] Use ata_id, not scsi_id, on ATAPI devices - -The major benefit here, is that we get the ATAPI device serial -number. With SCSI ID we didn't get this since it's not part of the -SCSI INQUIRY command. Specifically this means that we get symlinks to -empty optical drives, e.g. - - /dev/disk/by-id/ata-VBOX_CD-ROM_VB2-01700376 - -which we didn't get earlier. So this is a major win. - -Also make ata_id work on CD-ROM devices when using /dev/bsg nodes so -this works on both the scsi_device as well as the block device. We do -this, basically, by issuing the ATA IDENTIFY PACKET DEVICE command -instead of the ATA IDENTIFY command. We also use 16-byte pass-through -ATA passthrough instead of 12-byte passthrough to avoid clashing with -the MMC BLANK command. - -This means that we get this output - - # udevadm info -q all -p /sys/devices/pci0000:00/0000:00:01.1/host3/target3:0:0/3:0:0:0 - P: /devices/pci0000:00/0000:00:01.1/host3/target3:0:0/3:0:0:0 - E: UDEV_LOG=3 - E: DEVPATH=/devices/pci0000:00/0000:00:01.1/host3/target3:0:0/3:0:0:0 - E: DEVTYPE=scsi_device - E: DRIVER=sr - E: MODALIAS=scsi:t-0x05 - E: SUBSYSTEM=scsi - E: ID_ATA=1 - E: ID_TYPE=cd - E: ID_BUS=ata - E: ID_MODEL=VBOX_CD-ROM - E: ID_MODEL_ENC=VBOX\x20CD-ROM\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x 20\x20\x20\x20\x20\x20\x20 - E: ID_REVISION=1.0 - E: ID_SERIAL=VBOX_CD-ROM_VB2-01700376 - E: ID_SERIAL_SHORT=VB2-01700376 - -instead of just - - # udevadm info -q all -p /sys/devices/pci0000:00/0000:00:01.1/host3/target3:0:0/3:0:0:0 - P: /devices/pci0000:00/0000:00:01.1/host3/target3:0:0/3:0:0:0 - E: UDEV_LOG=3 - E: DEVPATH=/devices/pci0000:00/0000:00:01.1/host3/target3:0:0/3:0:0:0 - E: DEVTYPE=scsi_device - E: DRIVER=sr - E: MODALIAS=scsi:t-0x05 - E: SUBSYSTEM=scsi - E: ID_SCSI=1 - E: ID_VENDOR=VBOX - E: ID_VENDOR_ENC=VBOX\x20\x20\x20\x20 - E: ID_MODEL=CD-ROM - E: ID_MODEL_ENC=CD-ROM\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20 - E: ID_REVISION=1.0 - E: ID_TYPE=cd - -Signed-off-by: David Zeuthen <davidz@redhat.com> ---- - extras/ata_id/ata_id.c | 122 ++++++++++++++++++++++++++--- - rules/rules.d/60-persistent-storage.rules | 4 + - 2 files changed, 114 insertions(+), 12 deletions(-) - -diff --git a/extras/ata_id/ata_id.c b/extras/ata_id/ata_id.c -index 41544e9..92387e5 100644 ---- a/extras/ata_id/ata_id.c -+++ b/extras/ata_id/ata_id.c -@@ -202,6 +202,89 @@ static int disk_identify_command(int fd, - return ret; - } - -+static int disk_identify_packet_device_command(int fd, -+ void *buf, -+ size_t buf_len) -+{ -+ struct sg_io_v4 io_v4; -+ uint8_t cdb[16]; -+ uint8_t sense[32]; -+ uint8_t *desc = sense+8; -+ int ret; -+ -+ /* -+ * ATA Pass-Through 16 byte command, as described in -+ * -+ * T10 04-262r8 ATA Command Pass-Through -+ * -+ * from http://www.t10.org/ftp/t10/document.04/04-262r8.pdf -+ */ -+ memset(cdb, 0, sizeof(cdb)); -+ cdb[0] = 0x85; /* OPERATION CODE: 16 byte pass through */ -+ cdb[1] = 4 << 1; /* PROTOCOL: PIO Data-in */ -+ cdb[2] = 0x2e; /* OFF_LINE=0, CK_COND=1, T_DIR=1, BYT_BLOK=1, T_LENGTH=2 */ -+ cdb[3] = 0; /* FEATURES */ -+ cdb[4] = 0; /* FEATURES */ -+ cdb[5] = 0; /* SECTORS */ -+ cdb[6] = 1; /* SECTORS */ -+ cdb[7] = 0; /* LBA LOW */ -+ cdb[8] = 0; /* LBA LOW */ -+ cdb[9] = 0; /* LBA MID */ -+ cdb[10] = 0; /* LBA MID */ -+ cdb[11] = 0; /* LBA HIGH */ -+ cdb[12] = 0; /* LBA HIGH */ -+ cdb[13] = 0; /* DEVICE */ -+ cdb[14] = 0xA1; /* Command: ATA IDENTIFY PACKET DEVICE */; -+ cdb[15] = 0; /* CONTROL */ -+ memset(sense, 0, sizeof(sense)); -+ -+ memset(&io_v4, 0, sizeof(struct sg_io_v4)); -+ io_v4.guard = 'Q'; -+ io_v4.protocol = BSG_PROTOCOL_SCSI; -+ io_v4.subprotocol = BSG_SUB_PROTOCOL_SCSI_CMD; -+ io_v4.request_len = sizeof (cdb); -+ io_v4.request = (uintptr_t) cdb; -+ io_v4.max_response_len = sizeof (sense); -+ io_v4.response = (uintptr_t) sense; -+ io_v4.din_xfer_len = buf_len; -+ io_v4.din_xferp = (uintptr_t) buf; -+ io_v4.timeout = COMMAND_TIMEOUT_MSEC; -+ -+ ret = ioctl(fd, SG_IO, &io_v4); -+ if (ret != 0) { -+ /* could be that the driver doesn't do version 4, try version 3 */ -+ if (errno == EINVAL) { -+ struct sg_io_hdr io_hdr; -+ -+ memset(&io_hdr, 0, sizeof(struct sg_io_hdr)); -+ io_hdr.interface_id = 'S'; -+ io_hdr.cmdp = (unsigned char*) cdb; -+ io_hdr.cmd_len = sizeof (cdb); -+ io_hdr.dxferp = buf; -+ io_hdr.dxfer_len = buf_len; -+ io_hdr.sbp = sense; -+ io_hdr.mx_sb_len = sizeof (sense); -+ io_hdr.dxfer_direction = SG_DXFER_FROM_DEV; -+ io_hdr.timeout = COMMAND_TIMEOUT_MSEC; -+ -+ ret = ioctl(fd, SG_IO, &io_hdr); -+ if (ret != 0) -+ goto out; -+ } else { -+ goto out; -+ } -+ } -+ -+ if (!(sense[0] == 0x72 && desc[0] == 0x9 && desc[1] == 0x0c)) { -+ errno = EIO; -+ ret = -1; -+ goto out; -+ } -+ -+ out: -+ return ret; -+} -+ - /** - * disk_identify_get_string: - * @identify: A block of IDENTIFY data -@@ -256,31 +339,36 @@ static void disk_identify_fixup_uint16 (uint8_t identify[512], unsigned int offs - * @udev: The libudev context. - * @fd: File descriptor for the block device. - * @out_identify: Return location for IDENTIFY data. -+ * @out_is_packet_device: Return location for whether returned data is from a IDENTIFY PACKET DEVICE. - * -- * Sends the IDENTIFY DEVICE command to the device represented by -- * @fd. If successful, then the result will be copied into -- * @out_identify. -+ * Sends the IDENTIFY DEVICE or IDENTIFY PACKET DEVICE command to the -+ * device represented by @fd. If successful, then the result will be -+ * copied into @out_identify and @out_is_packet_device. - * - * This routine is based on code from libatasmart, Copyright 2008 - * Lennart Poettering, LGPL v2.1. - * -- * Returns: 0 if the IDENTIFY data was successfully obtained, -- * otherwise non-zero with errno set. -+ * Returns: 0 if the data was successfully obtained, otherwise -+ * non-zero with errno set. - */ - static int disk_identify (struct udev *udev, - int fd, -- uint8_t out_identify[512]) -+ uint8_t out_identify[512], -+ int *out_is_packet_device) - { - int ret; - uint8_t inquiry_buf[36]; - int peripheral_device_type; - int all_nul_bytes; - int n; -+ int is_packet_device; - - assert (out_identify != NULL); -+ - /* init results */ - ret = -1; - memset (out_identify, '\0', 512); -+ is_packet_device = 0; - - /* If we were to use ATA PASS_THROUGH (12) on an ATAPI device - * we could accidentally blank media. This is because MMC's BLANK -@@ -309,6 +397,12 @@ static int disk_identify (struct udev *udev, - - /* SPC-4, section 6.4.2: Standard INQUIRY data */ - peripheral_device_type = inquiry_buf[0] & 0x1f; -+ if (peripheral_device_type == 0x05) -+ { -+ is_packet_device = 1; -+ ret = disk_identify_packet_device_command(fd, out_identify, 512); -+ goto check_nul_bytes; -+ } - if (peripheral_device_type != 0x00) { - ret = -1; - errno = EIO; -@@ -320,6 +414,7 @@ static int disk_identify (struct udev *udev, - if (ret != 0) - goto out; - -+ check_nul_bytes: - /* Check if IDENTIFY data is all NUL bytes - if so, bail */ - all_nul_bytes = 1; - for (n = 0; n < 512; n++) { -@@ -336,6 +431,8 @@ static int disk_identify (struct udev *udev, - } - - out: -+ if (out_is_packet_device != NULL) -+ *out_is_packet_device = is_packet_device; - return ret; - } - -@@ -350,7 +447,7 @@ int main(int argc, char *argv[]) - { - struct udev *udev; - struct hd_driveid id; -- uint8_t identify[512]; -+ uint8_t identify[512]; - char model[41]; - char model_enc[256]; - char serial[21]; -@@ -358,8 +455,9 @@ int main(int argc, char *argv[]) - const char *node = NULL; - int export = 0; - int fd; -- uint16_t word; -+ uint16_t word; - int rc = 0; -+ int is_packet_device = 0; - static const struct option options[] = { - { "export", no_argument, NULL, 'x' }, - { "help", no_argument, NULL, 'h' }, -@@ -408,7 +506,7 @@ int main(int argc, char *argv[]) - goto exit; - } - -- if (disk_identify(udev, fd, identify) == 0) { -+ if (disk_identify(udev, fd, identify, &is_packet_device) == 0) { - /* - * fix up only the fields from the IDENTIFY data that we are going to - * use and copy it into the hd_driveid struct for convenience -@@ -416,7 +514,7 @@ int main(int argc, char *argv[]) - disk_identify_fixup_string (identify, 10, 20); /* serial */ - disk_identify_fixup_string (identify, 23, 6); /* fwrev */ - disk_identify_fixup_string (identify, 27, 40); /* model */ -- disk_identify_fixup_uint16 (identify, 0); /* configuration */ -+ disk_identify_fixup_uint16 (identify, 0); /* configuration */ - disk_identify_fixup_uint16 (identify, 75); /* queue depth */ - disk_identify_fixup_uint16 (identify, 75); /* SATA capabilities */ - disk_identify_fixup_uint16 (identify, 82); /* command set supported */ -@@ -457,8 +555,8 @@ int main(int argc, char *argv[]) - udev_util_replace_chars(revision, NULL); - - if (export) { -- /* Set this to convey the disk speaks the ATA protocol */ -- printf("ID_ATA=1\n"); -+ /* Set this to convey the disk speaks the ATA protocol */ -+ printf("ID_ATA=1\n"); - - if ((id.config >> 8) & 0x80) { - /* This is an ATAPI device */ -diff --git a/rules/rules.d/60-persistent-storage.rules b/rules/rules.d/60-persistent-storage.rules -index d3f2f73..8baabc2 100644 ---- a/rules/rules.d/60-persistent-storage.rules -+++ b/rules/rules.d/60-persistent-storage.rules -@@ -12,6 +12,8 @@ ACTION=="remove", GOTO="persistent_storage_end" - - # run scsi_id and ata_id on the actual SCSI device - SUBSYSTEM=="scsi", ENV{DEVTYPE}=="scsi_device", ENV{ID_SERIAL}!="?*", ATTR{vendor}=="ATA", IMPORT{program}="ata_id --export $root/bsg/$kernel" -+# ATA/ATAPI devices is of type 0x05 and vendor is usually not ATA -+SUBSYSTEM=="scsi", ENV{DEVTYPE}=="scsi_device", ENV{ID_SERIAL}!="?*", ATTR{type}=="5", IMPORT{program}="ata_id --export $root/bsg/$kernel" - SUBSYSTEM=="scsi", ENV{DEVTYPE}=="scsi_device", ENV{ID_SERIAL}!="?*", IMPORT{program}="scsi_id --whitelisted --export --device $root/bsg/$kernel" - - # from this point on, only care about block devices -@@ -40,6 +42,8 @@ KERNEL=="sd*[!0-9]|sr*", ENV{ID_SERIAL}!="?*", SUBSYSTEMS=="usb", IMPORT{program - KERNEL=="sd*[!0-9]|sr*", ENV{ID_SERIAL}!="?*", SUBSYSTEMS=="ata", IMPORT{program}="ata_id --export $tempnode" - # ATA devices using the "scsi" subsystem - KERNEL=="sd*[!0-9]|sr*", ENV{ID_SERIAL}!="?*", SUBSYSTEMS=="scsi", ATTRS{vendor}=="ATA", IMPORT{program}="ata_id --export $tempnode" -+# ATA/ATAPI devices using the "scsi" subsystem -+KERNEL=="sd*[!0-9]|sr*", ENV{ID_SERIAL}!="?*", SUBSYSTEMS=="scsi", ATTRS{type}=="5", IMPORT{program}="ata_id --export $tempnode" - # scsi devices - KERNEL=="sd*[!0-9]|sr*", ENV{ID_SERIAL}!="?*", IMPORT{program}="scsi_id --export --whitelisted -d $tempnode", ENV{ID_BUS}="scsi" - KERNEL=="cciss*", ENV{DEVTYPE}=="disk", ENV{ID_SERIAL}!="?*", IMPORT{program}="scsi_id --export --whitelisted -d $tempnode", ENV{ID_BUS}="cciss" --- -1.7.3.4 - |