diff options
Diffstat (limited to 'source/a/util-linux-ng/util-linux-ng.SlackBuild')
| -rwxr-xr-x | source/a/util-linux-ng/util-linux-ng.SlackBuild | 310 |
1 files changed, 0 insertions, 310 deletions
diff --git a/source/a/util-linux-ng/util-linux-ng.SlackBuild b/source/a/util-linux-ng/util-linux-ng.SlackBuild deleted file mode 100755 index 386487ab..00000000 --- a/source/a/util-linux-ng/util-linux-ng.SlackBuild +++ /dev/null @@ -1,310 +0,0 @@ -#!/bin/sh - -# Copyright 2008, 2009, 2010 Patrick J. Volkerding, Sebeka, MN, USA -# All rights reserved. -# -# Redistribution and use of this script, with or without modification, is -# permitted provided that the following conditions are met: -# -# 1. Redistributions of this script must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# -# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED -# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO -# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, -# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, -# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; -# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, -# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR -# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF -# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -# Slackware build script for util-linux-ng - -VERSION=${VERSION:-$(echo util-linux-ng*.tar.?z* | cut -d - -f 4 | rev | cut -f 3- -d . | rev)} -BUILD=${BUILD:-1} - -ADJTIMEXVERS=1.23 -SETSERIALVERS=2.17 -ZIPTOOLVERS=1.4.0 - -# Automatically determine the architecture we're building on: -if [ -z "$ARCH" ]; then - case "$( uname -m )" in - i?86) export ARCH=i486 ;; - arm*) export ARCH=arm ;; - # Unless $ARCH is already set, use uname -m for all other archs: - *) export ARCH=$( uname -m ) ;; - esac -fi - -if [ "$ARCH" = "i486" ]; then - SLKCFLAGS="-O2 -march=i486 -mtune=i686" - LIBDIRSUFFIX="" -elif [ "$ARCH" = "s390" ]; then - SLKCFLAGS="-O2" - LIBDIRSUFFIX="" -elif [ "$ARCH" = "x86_64" ]; then - SLKCFLAGS="-O2 -fPIC" - LIBDIRSUFFIX="64" -else - SLKCFLAGS="-O2" - LIBDIRSUFFIX="" -fi - -CWD=$(pwd) -TMP=${TMP:-/tmp} -PKG=$TMP/package-util-linux-ng - -rm -rf $PKG -mkdir -p $TMP $PKG -cd $TMP || exit 1 -rm -rf util-linux-ng-$VERSION -tar xvf $CWD/util-linux-ng-$VERSION.tar.xz || exit 1 -cd util-linux-ng-$VERSION || exit 1 -chown -R root.root . -find . \ - \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ - -exec chmod 755 {} \; -o \ - \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ - -exec chmod 644 {} \; - -# Disabled login and init stuff from being built, as this is provided by -# shadow and sysvinit -# -# /sbin/elvtune is not built, as configure says it only works with 2.2 and -# 2.4 kernels - -# This block is handled near the bottom of the script in symlink creation -# /bin/setterm -- now located in /usr/bin/setterm -# /bin/getopt -- same as setterm -# /usr/bin/readprofile -- now in /usr/sbin -# /usr/bin/tunelp -- same as readprofile - -# Changing the fdisk -l output (this was done prior to util-linux-ng) broke -# our installation scripts, so we have changed the name of partition type -# 83 back to "Linux swap": -zcat $CWD/util-linux-ng.fdisk-no-solaris.diff.gz | patch -p1 || exit 1 - -CFLAGS="$SLKCFLAGS" \ -./configure \ - --prefix=/usr \ - --libdir=/usr/lib${LIBDIRSUFFIX} \ - --sysconfdir=/etc \ - --localstatedir=/var \ - --mandir=/usr/man \ - --infodir=/usr/info \ - --docdir=/usr/doc/util-linux-ng-$VERSION \ - --disable-static \ - --enable-arch \ - --enable-agetty \ - --disable-init \ - --enable-kill \ - --enable-rdev \ - --disable-last \ - --enable-mesg \ - --enable-raw \ - --enable-rename \ - --enable-reset \ - --disable-login-utils \ - --enable-schedutils \ - --enable-wall \ - --enable-write \ - --enable-use-tty-group \ - --enable-libblkid \ - --enable-libuuid \ - --disable-uuidd \ - --build=$ARCH-slackware-linux \ - || exit 1 - -make || exit 1 -make install DESTDIR=$PKG || make install DESTDIR=$PKG - -# Move the libblkid and libuuid libraries to /lib${LIBSUFFIX} -mkdir -p $PKG/lib${LIBDIRSUFFIX} -( cd $PKG/usr/lib${LIBDIRSUFFIX} - mv libblkid.so.1* $PKG/lib${LIBDIRSUFFIX} - mv libuuid.so.1* $PKG/lib${LIBDIRSUFFIX} - rm -f libblkid.so libuuid.so - ln -sf /lib${LIBDIRSUFFIX}/libblkid.so.1 libblkid.so - ln -sf /lib${LIBDIRSUFFIX}/libuuid.so.1 libuuid.so -) - -# Moving things around that have been in the same place -# for 15 years is, IMHO, not a wise idea AT ALL. -# If this had to be moved, some place out of /usr might -# have shown a grain of insight... -if [ -r $PKG/usr/sbin/fdformat ]; then - mkdir -p $PKG/usr/bin - mv $PKG/usr/sbin/fdformat $PKG/usr/bin/fdformat - # Now since stuff will start looking in this new place, - # we have no choice but to link these: - ( cd $PKG/usr/sbin - ln -sf ../bin/fdformat . - ) -fi - -# Install (probably obsolete) rdev manually: -cat ./sys-utils/rdev > $PKG/sbin/rdev -chown root:root $PKG/sbin/rdev -chmod 755 $PKG/sbin/rdev - -# Build ziptool -cd $TMP || exit 1 -rm -rf ziptool-$ZIPTOOLVERS -tar xvf $CWD/ziptool-$ZIPTOOLVERS.tar.xz || exit 1 -cd ziptool-$ZIPTOOLVERS || exit 1 -zcat $CWD/ziptool-fix_build.patch.gz | patch -p1 || exit 1 -mkdir scsi -cat $CWD/scsi_ioctl.h > scsi/scsi_ioctl.h -chown -R root:root . -make || exit 1 -strip ziptool -cat ziptool > $PKG/sbin/ziptool -chmod 0755 $PKG/sbin/ziptool -mkdir -p $PKG/usr/doc/ziptool-$ZIPTOOLVERS -cp -a README $PKG/usr/doc/ziptool-$ZIPTOOLVERS -chmod 644 $PKG/usr/doc/ziptool-$ZIPTOOLVERS/* -cat ziptool.1.gz > $PKG/usr/man/man1/ziptool.1.gz - -# Build bsdstrings -cd $TMP || exit 1 -rm -rf bsdstrings -tar xvf $CWD/bsdstrings.tar.gz || exit 1 -cd bsdstrings || exit 1 -make || exit 1 -strip strings -cat strings > $PKG/usr/bin/strings -chmod 0755 $PKG/usr/bin/strings -cat strings.1 | gzip -9c > $PKG/usr/man/man1/strings.1.gz - -# Add just the hostname utilities from net-tools, so that anyone -# installing just the A series will not have a hostname (null): -cd $TMP || exit 1 -rm -rf net-tools-1.60 -tar xvf $CWD/net-tools-1.60.tar.xz -cd net-tools-1.60 -zcat $CWD/net-tools_1.60-19.diff.gz | patch -p1 || exit -zcat $CWD/net-tools.diff.gz | patch -p1 || exit -make -make hostname -strip hostname -cat hostname > $PKG/bin/hostname -chmod 755 $PKG/bin/hostname -chown root:root $PKG/bin/hostname -( cd $PKG/bin - ln -sf hostname dnsdomainname - ln -sf hostname nisdomainname - ln -sf hostname ypdomainname - ln -sf hostname domainname -) -cd man/en_US -for page in hostname.1 dnsdomainname.1 nisdomainname.1 ypdomainname.1 \ -domainname.1 ; do - cat $page | gzip -9c > $PKG/usr/man/man1/$page.gz -done - -# Build adjtimex -cd $TMP || exit 1 -rm -rf adjtimex-$ADJTIMEXVERS -tar xvf $CWD/adjtimex_${ADJTIMEXVERS}.orig.tar.gz || exit 1 -cd adjtimex-$ADJTIMEXVERS || exit 1 -chown -R root:root . -zcat $CWD/adjtimex_1.23-1.diff.gz | patch -p1 || exit 1 -CFLAGS=-O2 ./configure --prefix=/usr || exit 1 -make || exit 1 -strip adjtimex -cat adjtimex > $PKG/sbin/adjtimex -chmod 0755 $PKG/sbin/adjtimex -cat adjtimex.8 | gzip -9c > $PKG/usr/man/man8/adjtimex.8.gz -mkdir -p $PKG/usr/doc/adjtimex-$ADJTIMEXVERS -cp -a COPYING COPYRIGHT README README.ru adjtimex.lsm \ - $PKG/usr/doc/adjtimex-$ADJTIMEXVERS - -# Build setserial -cd $TMP || exit 1 -rm -rf setserial-$SETSERIALVERS -tar xvf $CWD/setserial-$SETSERIALVERS.tar.gz || exit 1 -cd setserial-$SETSERIALVERS || exit 1 -chown -R root:root . -zcat $CWD/setserial-rc.serial.diff.gz | patch -E -p1 --verbose || exit 1 -zcat $CWD/setserial-undef_TIOCGHAYESESP.diff.gz | patch -E -p1 --verbose || exit 1 -# The original config.{guess,sub} do not work on x86_64 -cp -p /usr/share/libtool/config/config.{guess,sub} . -./configure --prefix=/usr || exit 1 -make || exit 1 -strip setserial -cat setserial > $PKG/sbin/setserial -chmod 0755 $PKG/sbin/setserial -mkdir -p $PKG/etc/rc.d -cat rc.serial > $PKG/etc/rc.d/rc.serial.new -cat serial.conf > $PKG/etc/serial.conf.new -cat setserial.8 | gzip -9c > $PKG/usr/man/man8/setserial.8.gz - -# These have always traditionally been available before /usr -# might be mounted: -( cd $PKG/usr/bin - mv getopt setterm $PKG/bin - cd $PKG/usr/bin - ln -s ../../bin/getopt . - ln -s ../../bin/setterm . -) - -cd $TMP/util-linux-ng-$VERSION # Go back home :) - -# Now let's add some important symlinks :) -( cd $PKG/sbin - ln -s ../bin/mount . - ln -s ../bin/umount . - ln -s ziptool jaztool - ln -s hwclock clock - cd $PKG/usr/sbin - ln -s ../../sbin/cfdisk . - ln -s ../../sbin/ctrlaltdel . - ln -s ../../sbin/sfdisk . - cd $PKG/usr/bin - ln -s ../sbin/readprofile . - ln -s ../sbin/tunelp . - ln -s ../../bin/more . - ln -s ../../sbin/raw . - cd $PKG/usr/man/man1 - ln -s ziptool.1 jaztool.1 - cd $PKG/usr/man/man8 - ln -s hwclock.8 clock.8 -) - -find $PKG | xargs file | grep -e "executable" -e "shared object" \ - | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null - -# Compress and if needed symlink the man pages: -if [ -d $PKG/usr/man ]; then - ( cd $PKG/usr/man - for manpagedir in $(find . -type d -name "man*") ; do - ( cd $manpagedir - for eachpage in $( find . -type l -maxdepth 1) ; do - ln -s $( readlink $eachpage ).gz $eachpage.gz - rm $eachpage - done - gzip -9 *.? - ) - done - ) -fi - -# Compress info page and remove dir file -rm $PKG/usr/info/dir -gzip -9 $PKG/usr/info/* - -mkdir -p $PKG/usr/doc/util-linux-ng-$VERSION -cp -a AUTHORS COPYING DEPRECATED NEWS README* TODO \ - docs/v${VERSION}-ReleaseNotes \ - $PKG/usr/doc/util-linux-ng-$VERSION - -mkdir $PKG/install -cat $CWD/slack-desc > $PKG/install/slack-desc -zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh - -cd $PKG -/sbin/makepkg -l y -c n $TMP/util-linux-ng-$VERSION-$ARCH-$BUILD.txz - |