3 files changed, 313 insertions, 0 deletions
diff --git a/source/ap/ghostscript/cidfmap b/source/ap/ghostscript/cidfmap
new file mode 100644
index 00000000..0303f66f
--- /dev/null
+++ b/source/ap/ghostscript/cidfmap
@@ -0,0 +1,118 @@
+%!
+% $Id: cidfmap 6300 2005-12-28 19:56:24Z giles $
+% This is a sample map file for CIDFont category.
+
+%
+% The map is a set of records, which must use one of the two formats :
+%
+% 1. A substutution of a CIF font with another CID font :
+%
+%    /substituted /original ;
+%
+%    Where 'substituted' is a name being used in a document,
+%    'original' is a name of an available resource.
+%
+% 2. A substutution of a CIF font with a True Type font :
+%
+%    /substituted << /FileType /TrueType /Path (path) /SunfontID 1 /CSI [(ordering) supplement] >> ;
+%
+%    Where 'substituted' is a name being used in a document,
+%    'path' is a path to a True Type font file,
+%    'ordering' is a value of Ordering required for CIDSystemInfo dictionary,
+%    'supplement' is a value of Supplement required for CIDSystemInfo dictionary.
+%
+% Examples :
+%
+%   /ShinGo-Bold   /HeiseiKakuGo-W5 ;
+%   /Ryumin-Medium << /FileType /TrueType /Path (H:/AuxFiles/Fonts/BATANG.TTC) /SubfontID 3 /CSI [(Japan1) 2] >> ;
+%
+
+
+%% cidfmap.zh_CN (simplified Chinese ; zh_CN)
+%% This font will produce better results than the wqy-zenhei.ttf that we use
+%% to get out-of-the-box output.
+%% If you install it, uncomment the line below and comment the one below that.
+%/BousungEG-Light-GB            << /FileType /TrueType /Path (uming.ttf) /CSI [(GB1) 4] >> ;
+/BousungEG-Light-GB             << /FileType /TrueType /Path (wqy-zenhei.ttf) /CSI [(GB1) 4] >> ;
+%% This font will produce better results than the wqy-zenhei.ttf that we use
+%% to get out-of-the-box output.
+%% If you install it, uncomment the line below and comment the one below that.
+%/GBZenKai-Medium		<< /FileType /TrueType /Path (ukai.ttf) /CSI [(GB1) 4] >> ;
+/GBZenKai-Medium		<< /FileType /TrueType /Path (wqy-zenhei.ttf) /CSI [(GB1) 4] >> ;
+/MSungGBK-Light			<< /FileType /TrueType /Path (wqy-zenhei.ttf) /CSI [(GB1) 4] >> ;
+/MSung-Light			/MSungGBK-Light ;
+/MSung-Medium			/GBZenKai-Medium ;
+/MHei-Medium			/BousungEG-Light-GB ;
+/MKai-Medium			/GBZenKai-Medium ;
+/STSong-Light			/BousungEG-Light-GB ;
+/STFangsong-Light		/BousungEG-Light-GB ;
+/STHeiti-Regular		/MSungGBK-Light ;
+/STKaiti-Regular		/GBZenKai-Medium ;
+/Adobe-GB1                      /BousungEG-Light-GB ;
+
+%% cidfmap.zh_TW (traditional Chinese ; zh_TW)
+%% To use this example, install the missing uming.ttf and ukai.ttf fonts, and
+%% uncomment everything in the block below.  Also, fix the simplified Chinese
+%% block as described above for "better output" so that there is no
+%% interference (or comment the whole block out).
+%/BousungEG-Light-GB		<< /FileType /TrueType /Path (uming.ttf) /CSI [(CNS1) 4] >> ;
+%/ZenKai-Medium			<< /FileType /TrueType /Path (ukai.ttf) /CSI [(CNS1) 4] >> ;
+%/ShanHeiSun-Light		<< /FileType /TrueType /Path (wqy-zenhei.ttf) /CSI [(CNS1) 4] >> ;
+%/STSong-Light			/BousungEG-Light-GB ;
+%/STKaiti-Regular		/ZenKai-Medium-GB ;
+%/STFangsong-Light		/BousungEG-Light ;
+%/STHeiti-Regular		/MHei-Medium ;
+%/MSung-Light			/BousungEG-Light-GB ;
+%/MSung-Medium			/ZenKai-Medium ;
+%/MHei-Medium			/ShanHeiSun-Light ;
+%/MKai-Medium			/ZenKai-Medium ;
+%/Adobe-CNS1			/BousungEG-Light-GB ;
+
+%% cidfmap.ja
+/Sazanami-Gothic 		<< /FileType /TrueType /Path (sazanami-gothic.ttf) /CSI [(Japan1) 6] >> ;
+/Sazanami-Gothic-Regular 	/Sazanami-Gothic ;
+/Sazanami-Gothic-JaH 		<< /FileType /TrueType /Path (sazanami-gothic.ttf) /CSI [(Japan2) 0] >> ;
+/Sazanami-Gothic-Regular-JaH 	/Sazanami-Gothic-JaH ;
+/Sazanami-Mincho 		<< /FileType /TrueType /Path (sazanami-mincho.ttf) /CSI [(Japan1) 6] >> ;
+/Sazanami-Mincho-Regular 	/Sazanami-Mincho ;
+/Sazanami-Mincho-JaH 		<< /FileType /TrueType /Path (sazanami-mincho.ttf) /CSI [(Japan2) 0] >> ;
+/Sazanami-Mincho-Regular-JaH 	/Sazanami-Mincho-JaH ;
+/Ryumin-Light           	/Sazanami-Mincho        ;
+/Ryumin-Light-H         	/Sazanami-Mincho        ;
+/GothicBBB-Medium       	/Sazanami-Gothic        ;
+/GothicBBB-Medium-V     	/Sazanami-Gothic        ;
+/HeiseiMin-W3           	/Ryumin-Light           ;
+/HeiseiKakuGo-W5        	/GothicBBB-Medium       ;
+/HeiseiMin-W3-Acro      	/Ryumin-Light           ;
+/HeiseiKaKuGo-W5-Acro   	/GothicBBB-Medium       ;
+/Kochi-Gothic           	/Sazanami-Gothic        ;
+/Kochi-Mincho           	/Sazanami-Mincho        ;
+/WadaMin-Regular        	/Sazanami-Mincho        ;
+/WadaMin-Bold           	/Sazanami-Mincho        ;
+/WadaGo-Regular         	/Sazanami-Gothic        ;
+/WadaGo-Bold            	/Sazanami-Gothic        ;
+/Adobe-Japan1           	/Sazanami-Gothic        ;
+/Adobe-Japan2           	/Sazanami-Gothic-JaH    ;
+
+%% cidfmap.ko
+%% To enable Korean printing support, install the fonts shown in the example
+%% here and uncomment the block below:
+%/Baekmuk-Batang		<< /FileType /TrueType /Path (batang.ttf) /CSI [(Korea1) 2] >> ;
+%/Baekmuk-Batang-Regular	/Baekmuk-Batang ;
+%/Baekmuk-Dotum			<< /FileType /TrueType /Path (dotum.ttf) /CSI [(Korea1) 2] >> ;
+%/Baekmuk-Dotum-Regular		/Baekmuk-Dotum ;
+%/Baekmuk-Gulim			<< /FileType /TrueType /Path (gulim.ttf) /CSI [(Korea1) 2] >> ;
+%/Baekmuk-Gulim-Regular		/Baekmuk-Gulim ;
+%/Baekmuk-Headline		<< /FileType /TrueType /Path (hline.ttf) /CSI [(Korea1) 2] >> ;
+%/Baekmuk-Headline-Regular	/Baekmuk-Headline ;
+%/Adobe-Korea1			/Baekmuk-Batang ;
+
+%/BousungEG-Light-GB	<< /FileType /TrueType /Path (uming.ttf) /CSI [(GB1) 4] >> ;
+%/GBZenKai-Medium	<< /FileType /TrueType /Path (ukai.ttf) /CSI [(GB1) 4] >> ;
+%/MSungGBK-Light	/BousungEG-Light-GB ;
+%/Adobe-GB1		/BousungEG-Light-GB ;
+
+%/ZenKai-Medium		<< /FileType /TrueType /Path (ukai.ttf) /CSI [(CNS1) 4] >> ;
+%/ShanHeiSun-Light	<< /FileType /TrueType /Path (uming.ttf) /CSI [(CNS1) 4] >> ;
+%/Adobe-CNS1		/ShanHeiSun-Light ;
+
diff --git a/source/ap/ghostscript/ghostscript.SlackBuild b/source/ap/ghostscript/ghostscript.SlackBuild
new file mode 100755
index 00000000..b0bb34ba
--- /dev/null
+++ b/source/ap/ghostscript/ghostscript.SlackBuild
@@ -0,0 +1,176 @@
+#!/bin/sh
+
+# Copyright 2006, 2007, 2008, 2009  Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+PKGNAM=ghostscript
+VERSION=${VERSION:-8.70}
+ARCH=${ARCH:-x86_64}
+BUILD=${BUILD:-1}
+
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-${PKGNAM}
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+fi
+
+cd $TMP
+rm -rf ${PKGNAM}-${VERSION}
+tar xvf $CWD/${PKGNAM}-$VERSION.tar.?z* || exit 1
+cd ${PKGNAM}-$VERSION
+
+## Regenerate ./configure:
+#sh autogen.sh
+
+# Make sure ownerships and permissions are sane:
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+# Build/install IJS:
+( cd ijs
+  if [ ! -r configure ]; then
+    sh autogen.sh
+  fi
+  CFLAGS="$SLKCFLAGS" \
+  ./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --mandir=/usr/man \
+  --program-prefix= \
+  --program-suffix= \
+  --build=$ARCH-slackware-linux
+  make
+  make install
+  make install DESTDIR=$PKG
+) || exit 1
+
+# Configure:
+CFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --mandir=/usr/man \
+  --with-fontpath=/usr/share/fonts/TTF \
+  --with-ijs \
+  --disable-compile-inits \
+  --enable-dynamic \
+  --enable-cairo=no \
+  --program-prefix= \
+  --program-suffix= \
+  --build=$ARCH-slackware-linux
+
+# Build and install:
+make || exit 1
+make install DESTDIR=$PKG || exit 1
+make clean || exit 1
+make so || exit 1
+make soinstall DESTDIR=$PKG || exit 1
+
+# Replace the default cidfmap with one containing additional
+# support for CJK printing:
+
+if [ -r $PKG/usr/share/ghostscript/${VERSION}/Resource/Init/cidfmap ]; then
+  mv $PKG/usr/share/ghostscript/${VERSION}/Resource/Init/cidfmap $PKG/usr/share/ghostscript/${VERSION}/Resource/Init/cidfmap.default.ghostscript-${VERSION}
+  zcat $CWD/cidfmap.gz > $PKG/usr/share/ghostscript/${VERSION}/Resource/Init/cidfmap.new
+fi
+
+# Strip binaries:
+( cd $PKG
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+)
+
+# Compress and link manpages, if any:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.*
+      )
+    done
+  )
+fi
+
+# Compress info files, if any:
+if [ -d $PKG/usr/info ]; then
+  ( cd $PKG/usr/info
+    rm -f dir
+    gzip -9 *
+  )
+fi
+
+# Add a documentation directory:
+mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION
+( cd doc
+  cp -a \
+    COPYING ../LICENSE README \
+    $PKG/usr/doc/${PKGNAM}-$VERSION
+)
+( cd $PKG/usr/doc/${PKGNAM}-$VERSION
+  ln -sf /usr/share/ghostscript/$VERSION/doc doc
+)
+
+cd $TMP
+cp -a ${PKGNAM}-${VERSION}/examples/cjk $PKG/usr/share/ghostscript/${VERSION}/examples/
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+cat << EOF > $PKG/install/doinst.sh
+#!/bin/sh
+config() {
+  NEW="\$1"
+  OLD="\$(dirname \$NEW)/\$(basename \$NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r \$OLD ]; then
+    mv \$NEW \$OLD
+  elif [ "\$(cat \$OLD | md5sum)" = "\$(cat \$NEW | md5sum)" ]; then # toss the redundant copy
+    rm \$NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+config usr/share/ghostscript/${VERSION}/Resource/Init/cidfmap.new
+EOF
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/${PKGNAM}-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/source/ap/ghostscript/slack-desc b/source/ap/ghostscript/slack-desc
new file mode 100644
index 00000000..1ac40827
--- /dev/null
+++ b/source/ap/ghostscript/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+           |-----handy-ruler------------------------------------------------------|
+ghostscript: ghostscript (GPL Ghostscript)
+ghostscript:
+ghostscript: GPL Ghostscript is an interpreter of Adobe Systems' PostScript(tm)
+ghostscript: and Portable Document Format (PDF) languages.  Ghostscript is an
+ghostscript: essential part of the printing subsystem, taking PostScript output
+ghostscript: from applications and converting it into an appropriate printer or
+ghostscript: display format.  Ghostscript supports many printers directly, and
+ghostscript: more are supported through add-on packages.
+ghostscript:
+ghostscript:
+ghostscript: