summaryrefslogtreecommitdiff
path: root/source/ap
diff options
context:
space:
mode:
Diffstat (limited to 'source/ap')
-rw-r--r--source/ap/lxc/scripts/rc.6.lxc21
-rw-r--r--source/ap/lxc/scripts/rc.6.orig28
-rw-r--r--source/ap/lxc/scripts/rc.M.lxc65
-rw-r--r--source/ap/lxc/scripts/rc.M.orig67
-rw-r--r--source/ap/lxc/scripts/rc.S.lxc68
-rw-r--r--source/ap/lxc/scripts/rc.S.orig68
-rw-r--r--source/ap/lxc/scripts/rc.inet1.lxc40
-rw-r--r--source/ap/lxc/scripts/rc.inet1.orig40
8 files changed, 255 insertions, 142 deletions
diff --git a/source/ap/lxc/scripts/rc.6.lxc b/source/ap/lxc/scripts/rc.6.lxc
index 7fd57ef2..73923da9 100644
--- a/source/ap/lxc/scripts/rc.6.lxc
+++ b/source/ap/lxc/scripts/rc.6.lxc
@@ -44,6 +44,10 @@ case "$0" in
;;
esac
+# Restart init. This prevents init from hanging on to file handles for removed
+# glibc shared libraries in the case that those were upgraded or reinstalled.
+/sbin/telinit u
+
# Save the system time to the hardware clock using hwclock --systohc.
# This will also create or update the timestamps in /etc/adjtime.
if [ -x /sbin/hwclock -a -z "$container" ]; then
@@ -114,6 +118,11 @@ if [ -x /etc/rc.d/rc.openldap ]; then
/etc/rc.d/rc.openldap stop
fi
+# Stop the haveged entropy daemon:
+if [ -x /etc/rc.d/rc.haveged -a -z "$container" ]; then
+ /etc/rc.d/rc.haveged stop
+fi
+
# Stop D-Bus:
if [ -x /etc/rc.d/rc.messagebus ]; then
/etc/rc.d/rc.messagebus stop
@@ -122,10 +131,10 @@ fi
# Kill any processes (typically gam) that would otherwise prevent
# unmounting NFS volumes:
unset FUSER_DELAY
-for dir in $(/bin/mount | grep 'type nfs ' | cut -d ' ' -f 3 ) ; do
+for dir in $(/bin/mount | grep 'type nfs ' | sed -e 's|.* on ||g' | cut -d ' ' -f 1) ; do
echo "Killing processes holding NFS mount $dir open..."
# Background this to prevent fuser from also blocking shutdown:
- /usr/bin/fuser -k -m $dir &
+ /usr/bin/fuser -k -M -m "$dir" &
FUSER_DELAY=5
done
# If fuser was run, let it have some delay:
@@ -236,7 +245,11 @@ fi
if [ -z "$container" ]; then
echo "Unmounting local file systems:"
- /bin/umount -v -a -t no,proc,sysfs | tr -d ' ' | grep successfully | sed "s/:successfullyunmounted/ has been successfully unmounted./g" 2> /dev/null
+ /bin/umount -v -a -t no,proc,sysfs,devtmpfs,fuse.gvfsd-fuse,tmpfs
+ # JFS needs a sync here or the / partition cannot be remounted read-only.
+ # In spite of this, it seems that a JFS root partition will always be checked
+ # (and found to be clean) at boot:
+ /bin/sync
echo "Remounting root filesystem read-only:"
/bin/mount -v -n -o remount,ro /
fi
@@ -269,7 +282,7 @@ fi
if [ -z "$container" ]; then
if [ -r /etc/lvmtab -o -d /etc/lvm/backup ]; then
echo "Deactivating LVM volume groups:"
- /sbin/vgchange -an --ignorelockingfailure
+ /sbin/vgchange -an
fi
fi
diff --git a/source/ap/lxc/scripts/rc.6.orig b/source/ap/lxc/scripts/rc.6.orig
index 23c280d9..e3986db8 100644
--- a/source/ap/lxc/scripts/rc.6.orig
+++ b/source/ap/lxc/scripts/rc.6.orig
@@ -37,6 +37,10 @@ case "$0" in
;;
esac
+# Restart init. This prevents init from hanging on to file handles for removed
+# glibc shared libraries in the case that those were upgraded or reinstalled.
+/sbin/telinit u
+
# Save the system time to the hardware clock using hwclock --systohc.
# This will also create or update the timestamps in /etc/adjtime.
if [ -x /sbin/hwclock ]; then
@@ -107,6 +111,11 @@ if [ -x /etc/rc.d/rc.openldap ]; then
/etc/rc.d/rc.openldap stop
fi
+# Stop the haveged entropy daemon:
+if [ -x /etc/rc.d/rc.haveged ]; then
+ /etc/rc.d/rc.haveged stop
+fi
+
# Stop D-Bus:
if [ -x /etc/rc.d/rc.messagebus ]; then
/etc/rc.d/rc.messagebus stop
@@ -115,10 +124,10 @@ fi
# Kill any processes (typically gam) that would otherwise prevent
# unmounting NFS volumes:
unset FUSER_DELAY
-for dir in $(/bin/mount | grep 'type nfs ' | cut -d ' ' -f 3 ) ; do
+for dir in $(/bin/mount | grep 'type nfs ' | sed -e 's|.* on ||g' | cut -d ' ' -f 1) ; do
echo "Killing processes holding NFS mount $dir open..."
# Background this to prevent fuser from also blocking shutdown:
- /usr/bin/fuser -k -m $dir &
+ /usr/bin/fuser -k -M -m "$dir" &
FUSER_DELAY=5
done
# If fuser was run, let it have some delay:
@@ -225,8 +234,19 @@ if [ -x /etc/rc.d/rc.cgmanager ]; then
/etc/rc.d/rc.cgmanager stop
fi
+# Umount all tmpfs mounts except /dev/shm and under /run:
+cat /proc/mounts | grep " tmpfs " | grep -v -e " /run " -e " /run/" -e " /dev/shm " | while read mount ; do
+ umount --recursive -v $(echo $mount | cut -f 2 -d ' ') 2> /dev/null
+done
+
+# Unmount local file systems:
echo "Unmounting local file systems:"
-/bin/umount -v -a -t no,proc,sysfs | tr -d ' ' | grep successfully | sed "s/:successfullyunmounted/ has been successfully unmounted./g" 2> /dev/null
+/bin/umount -v -a -t no,proc,sysfs,devtmpfs,fuse.gvfsd-fuse,tmpfs
+
+# JFS needs a sync here or the / partition cannot be remounted read-only.
+# In spite of this, it seems that a JFS root partition will always be checked
+# (and found to be clean) at boot:
+/bin/sync
echo "Remounting root filesystem read-only:"
/bin/mount -v -n -o remount,ro /
@@ -258,7 +278,7 @@ fi
# Deactivate LVM volume groups:
if [ -r /etc/lvmtab -o -d /etc/lvm/backup ]; then
echo "Deactivating LVM volume groups:"
- /sbin/vgchange -an --ignorelockingfailure
+ /sbin/vgchange -an
fi
# This never hurts again (especially since root-on-LVM always fails
diff --git a/source/ap/lxc/scripts/rc.M.lxc b/source/ap/lxc/scripts/rc.M.lxc
index 2b16190e..8cab0150 100644
--- a/source/ap/lxc/scripts/rc.M.lxc
+++ b/source/ap/lxc/scripts/rc.M.lxc
@@ -27,10 +27,10 @@ if [ -x /sbin/ldconfig ]; then
/sbin/ldconfig &
fi
-# Screen blanks after 15 minutes idle time, and powers down in one hour
-# if the kernel supports APM or ACPI power management:
-if [ -z "$container" ]; then
- /bin/setterm -blank 15 -powersave powerdown -powerdown 60
+# Call the setterm init script to set screen blanking and power management
+# defaults:
+if [ -x /etc/rc.d/rc.setterm -a -z "$container" ]; then
+ /etc/rc.d/rc.setterm
fi
# Set the hostname.
@@ -105,6 +105,16 @@ if grep -wq sysfs /proc/mounts && grep -q devtmpfs /proc/filesystems ; then
fi
fi
+# Start the haveged entropy daemon:
+if [ -x /etc/rc.d/rc.haveged -a -z "$container" ]; then
+ /etc/rc.d/rc.haveged start
+fi
+
+# Start the rngd entropy daemon:
+if [ -x /etc/rc.d/rc.rngd -a -z "$container" ]; then
+ /etc/rc.d/rc.rngd start
+fi
+
# Initialize the networking hardware.
if [ -x /etc/rc.d/rc.inet1 ]; then
/etc/rc.d/rc.inet1
@@ -115,6 +125,11 @@ if [ -x /etc/rc.d/rc.messagebus ]; then
/etc/rc.d/rc.messagebus start
fi
+# Start console-kit-daemon:
+if [ -x /etc/rc.d/rc.consolekit ]; then
+ /etc/rc.d/rc.consolekit start
+fi
+
# Start Bluetooth:
if [ -x /etc/rc.d/rc.bluetooth ]; then
/etc/rc.d/rc.bluetooth start
@@ -146,8 +161,7 @@ if [ -x /etc/rc.d/rc.ntpd ]; then
fi
# Remove stale locks and junk files (must be done after mount -a!)
-/bin/rm -f /var/lock/* /var/spool/uucp/LCK..* /tmp/.X*lock /tmp/core /core 2> /dev/null
-/bin/rm -rf /var/spool/cron/cron.?????? 2> /dev/null
+/bin/rm -f /var/lock/* /var/spool/uucp/LCK..* /tmp/.X*lock /tmp/.X11-unix/* 2> /dev/null
# Remove stale hunt sockets so the game can start.
if [ -r /tmp/hunt -o -r /tmp/hunt.stats ]; then
@@ -191,11 +205,6 @@ if [ -x /usr/bin/update-mime-database -a -d /usr/share/mime ]; then
/usr/bin/update-mime-database /usr/share/mime 1> /dev/null 2> /dev/null &
fi
-# Start console-kit-daemon:
-if [ -x /etc/rc.d/rc.consolekit ]; then
- /etc/rc.d/rc.consolekit start
-fi
-
# Start HAL:
if [ -x /etc/rc.d/rc.hald ]; then
/etc/rc.d/rc.hald start
@@ -217,7 +226,7 @@ fi
if [ -x /usr/bin/update-gdk-pixbuf-loaders ]; then
echo "Updating gdk-pixbuf.loaders:"
echo " /usr/bin/update-gdk-pixbuf-loaders &"
- /usr/bin/update-gdk-pixbuf-loaders > /dev/null 2>&1 &
+ HOME=/root /usr/bin/update-gdk-pixbuf-loaders > /dev/null 2>&1 &
fi
if [ -x /usr/bin/update-pango-querymodules ]; then
echo "Updating pango.modules:"
@@ -255,12 +264,10 @@ if [ -x /etc/rc.d/rc.atalk ]; then
fi
# Start smartd, which monitors the status of S.M.A.R.T. compatible
-# hard drives and reports any problems. Note some devices (which aren't
-# smart, I guess ;) will hang if probed by smartd, so it's commented out
-# by default.
-#if [ -x /usr/sbin/smartd ]; then
-# /usr/sbin/smartd
-#fi
+# hard drives and reports any problems:
+if [ -x /etc/rc.d/rc.smartd -a -z "$container" ]; then
+ /etc/rc.d/rc.smartd start
+fi
# Monitor the UPS with genpowerd.
# To use this, uncomment this section and edit your settings in
@@ -285,15 +292,13 @@ if [ -x /sbin/accton -a -r /var/log/pacct ]; then
fi
# Start crond (Dillon's crond):
-# If you want cron to actually log activity to /var/log/cron, then change
-# -l notice to -l info to increase the logging level.
-if [ -x /usr/sbin/crond ]; then
- /usr/sbin/crond -l notice
+if [ -x /etc/rc.d/rc.crond ]; then
+ /etc/rc.d/rc.crond start
fi
# Start atd (manages jobs scheduled with 'at'):
-if [ -x /usr/sbin/atd ]; then
- /usr/sbin/atd -b 15 -l 1
+if [ -x /etc/rc.d/rc.atd ]; then
+ /etc/rc.d/rc.atd start
fi
# Slackware-Mini-Quota-HOWTO:
@@ -386,6 +391,18 @@ if [ -x /etc/rc.d/rc.gpm ]; then
/etc/rc.d/rc.gpm start
fi
+# Start the Icecream scheduler. This needs to run on only one machine that is
+# part of the compile cluster:
+if [ -x /etc/rc.d/rc.icecc-scheduler ]; then
+ /etc/rc.d/rc.icecc-scheduler start
+fi
+
+# Start the Icecream daemon. This needs to run on every machine that will be
+# part of the compile cluster (including the machine running the scheduler):
+if [ -x /etc/rc.d/rc.iceccd ]; then
+ /etc/rc.d/rc.iceccd start
+fi
+
# If there are SystemV init scripts for this runlevel, run them.
if [ -x /etc/rc.d/rc.sysvinit ]; then
/etc/rc.d/rc.sysvinit
diff --git a/source/ap/lxc/scripts/rc.M.orig b/source/ap/lxc/scripts/rc.M.orig
index 0cd9f0b5..cfffb8ec 100644
--- a/source/ap/lxc/scripts/rc.M.orig
+++ b/source/ap/lxc/scripts/rc.M.orig
@@ -20,9 +20,11 @@ if [ -x /sbin/ldconfig ]; then
/sbin/ldconfig &
fi
-# Screen blanks after 15 minutes idle time, and powers down in one hour
-# if the kernel supports APM or ACPI power management:
-/bin/setterm -blank 15 -powersave powerdown -powerdown 60
+# Call the setterm init script to set screen blanking and power management
+# defaults:
+if [ -x /etc/rc.d/rc.setterm ]; then
+ /etc/rc.d/rc.setterm
+fi
# Set the hostname.
if [ -r /etc/HOSTNAME ]; then
@@ -30,7 +32,7 @@ if [ -r /etc/HOSTNAME ]; then
else
# fall back on this old default:
echo "darkstar.example.net" > /etc/HOSTNAME
- /bin/hostname darkstar
+ /bin/hostname $(cat /etc/HOSTNAME)
fi
# Set the permissions on /var/log/dmesg according to whether the kernel
@@ -94,6 +96,16 @@ if grep -wq sysfs /proc/mounts && grep -q devtmpfs /proc/filesystems ; then
fi
fi
+# Start the haveged entropy daemon:
+if [ -x /etc/rc.d/rc.haveged ]; then
+ /etc/rc.d/rc.haveged start
+fi
+
+# Start the rngd entropy daemon:
+if [ -x /etc/rc.d/rc.rngd ]; then
+ /etc/rc.d/rc.rngd start
+fi
+
# Initialize the networking hardware.
if [ -x /etc/rc.d/rc.inet1 ]; then
/etc/rc.d/rc.inet1
@@ -104,6 +116,11 @@ if [ -x /etc/rc.d/rc.messagebus ]; then
/etc/rc.d/rc.messagebus start
fi
+# Start console-kit-daemon:
+if [ -x /etc/rc.d/rc.consolekit ]; then
+ /etc/rc.d/rc.consolekit start
+fi
+
# Start Bluetooth:
if [ -x /etc/rc.d/rc.bluetooth ]; then
/etc/rc.d/rc.bluetooth start
@@ -135,8 +152,7 @@ if [ -x /etc/rc.d/rc.ntpd ]; then
fi
# Remove stale locks and junk files (must be done after mount -a!)
-/bin/rm -f /var/lock/* /var/spool/uucp/LCK..* /tmp/.X*lock /tmp/core /core 2> /dev/null
-/bin/rm -rf /var/spool/cron/cron.?????? 2> /dev/null
+/bin/rm -f /var/lock/* /var/spool/uucp/LCK..* /tmp/.X*lock /tmp/.X11-unix/* 2> /dev/null
# Remove stale hunt sockets so the game can start.
if [ -r /tmp/hunt -o -r /tmp/hunt.stats ]; then
@@ -180,11 +196,6 @@ if [ -x /usr/bin/update-mime-database -a -d /usr/share/mime ]; then
/usr/bin/update-mime-database /usr/share/mime 1> /dev/null 2> /dev/null &
fi
-# Start console-kit-daemon:
-if [ -x /etc/rc.d/rc.consolekit ]; then
- /etc/rc.d/rc.consolekit start
-fi
-
# Start HAL:
if [ -x /etc/rc.d/rc.hald ]; then
/etc/rc.d/rc.hald start
@@ -206,7 +217,7 @@ fi
if [ -x /usr/bin/update-gdk-pixbuf-loaders ]; then
echo "Updating gdk-pixbuf.loaders:"
echo " /usr/bin/update-gdk-pixbuf-loaders &"
- /usr/bin/update-gdk-pixbuf-loaders > /dev/null 2>&1 &
+ HOME=/root /usr/bin/update-gdk-pixbuf-loaders > /dev/null 2>&1 &
fi
if [ -x /usr/bin/update-pango-querymodules ]; then
echo "Updating pango.modules:"
@@ -244,12 +255,10 @@ if [ -x /etc/rc.d/rc.atalk ]; then
fi
# Start smartd, which monitors the status of S.M.A.R.T. compatible
-# hard drives and reports any problems. Note some devices (which aren't
-# smart, I guess ;) will hang if probed by smartd, so it's commented out
-# by default.
-#if [ -x /usr/sbin/smartd ]; then
-# /usr/sbin/smartd
-#fi
+# hard drives and reports any problems:
+if [ -x /etc/rc.d/rc.smartd ]; then
+ /etc/rc.d/rc.smartd start
+fi
# Monitor the UPS with genpowerd.
# To use this, uncomment this section and edit your settings in
@@ -274,15 +283,13 @@ if [ -x /sbin/accton -a -r /var/log/pacct ]; then
fi
# Start crond (Dillon's crond):
-# If you want cron to actually log activity to /var/log/cron, then change
-# -l notice to -l info to increase the logging level.
-if [ -x /usr/sbin/crond ]; then
- /usr/sbin/crond -l notice
+if [ -x /etc/rc.d/rc.crond ]; then
+ /etc/rc.d/rc.crond start
fi
# Start atd (manages jobs scheduled with 'at'):
-if [ -x /usr/sbin/atd ]; then
- /usr/sbin/atd -b 15 -l 1
+if [ -x /etc/rc.d/rc.atd ]; then
+ /etc/rc.d/rc.atd start
fi
# Slackware-Mini-Quota-HOWTO:
@@ -375,6 +382,18 @@ if [ -x /etc/rc.d/rc.gpm ]; then
/etc/rc.d/rc.gpm start
fi
+# Start the Icecream scheduler. This needs to run on only one machine that is
+# part of the compile cluster:
+if [ -x /etc/rc.d/rc.icecc-scheduler ]; then
+ /etc/rc.d/rc.icecc-scheduler start
+fi
+
+# Start the Icecream daemon. This needs to run on every machine that will be
+# part of the compile cluster (including the machine running the scheduler):
+if [ -x /etc/rc.d/rc.iceccd ]; then
+ /etc/rc.d/rc.iceccd start
+fi
+
# If there are SystemV init scripts for this runlevel, run them.
if [ -x /etc/rc.d/rc.sysvinit ]; then
/etc/rc.d/rc.sysvinit
diff --git a/source/ap/lxc/scripts/rc.S.lxc b/source/ap/lxc/scripts/rc.S.lxc
index d6bc21f0..6732184a 100644
--- a/source/ap/lxc/scripts/rc.S.lxc
+++ b/source/ap/lxc/scripts/rc.S.lxc
@@ -191,11 +191,6 @@ if [ -z "$container" ]; then
/sbin/swapon -a 2> /dev/null
fi
-# Start FUSE, if requested:
-if [ -x /etc/rc.d/rc.fuse -a -z "$container" ]; then
- /etc/rc.d/rc.fuse start
-fi
-
# Set the tick and frequency for the system clock.
# Default values are: TICK=10000 and FREQ=0
if [ -z "$container" ]; then
@@ -255,7 +250,12 @@ fi
# Check the root filesystem:
if [ -z "$container" ]; then
- if [ ! $READWRITE = yes ]; then
+ # If we're using F2FS for the root filesystem, don't check it as it doesn't
+ # allow checking a read-only filesystem:
+ if grep -q ' / f2fs ' /proc/mounts ; then
+ echo "Remounting root device with read-write enabled."
+ /sbin/mount -w -v -n -o remount /
+ elif [ ! $READWRITE = yes ]; then
RETVAL=0
if [ ! -r /etc/fastboot ]; then
echo "Checking root filesystem:"
@@ -294,7 +294,6 @@ if [ -z "$container" ]; then
/sbin/umount -a -r
/sbin/mount -n -o remount,ro /
echo "Rebooting system."
- sleep 2
reboot -f
fi
# Remount the root filesystem in read-write mode
@@ -318,24 +317,23 @@ if [ -z "$container" ]; then
fi # Done checking root filesystem
fi
-# Any /etc/mtab that exists here is old, so we start with a new one:
-/bin/rm -f /etc/mtab{,~,.tmp} && /bin/touch /etc/mtab
-
-# Add entry for / to /etc/mtab:
-if [ -z "$container" ]; then
- /sbin/mount -f -w /
-fi
-
-# Add /proc, /sys, and /dev/shm mounts to /etc/mtab:
-if [ -z "$container" ]; then
- if [ -d /proc/sys ]; then
- /sbin/mount -f -t proc proc /proc
- fi
- if [ -d /sys/bus ]; then
- /sbin/mount -f -t sysfs sysfs /sys
- fi
- if grep -q '^[^ ]\+ /dev/shm ' /proc/mounts 2> /dev/null ; then
- /sbin/mount -f -t tmpfs tmpfs /dev/shm
+# If /etc/mtab is a symlink (probably to /proc/mounts) then we don't want to mess with it.
+if [ ! -L /etc/mtab -o ! -r /etc/mtab ]; then
+ # /etc/mtab is a file (or doesn't exist), so we'll handle it the old way:
+ # Any /etc/mtab that exists here is old, so we start with a new one:
+ /bin/rm -f /etc/mtab{,~,.tmp} && /bin/touch /etc/mtab
+ if [ -z "$container" ]; then
+ # Add /, /proc, /sys, and /dev/shm mounts to /etc/mtab:
+ /sbin/mount -f -w /
+ if [ -d /proc/sys ]; then
+ /sbin/mount -f -t proc proc /proc
+ fi
+ if [ -d /sys/bus ]; then
+ /sbin/mount -f -t sysfs sysfs /sys
+ fi
+ if grep -q '^[^ ]\+ /dev/shm ' /proc/mounts 2> /dev/null ; then
+ /sbin/mount -f -t tmpfs tmpfs /dev/shm
+ fi
fi
fi
@@ -384,18 +382,15 @@ fi
# because those have already been mounted. Also check that
# devpts is not already mounted before attempting to mount
# it. With a 2.6.x or newer kernel udev mounts devpts.
-# We also need to wait a little bit to let USB and other
-# hotplugged devices settle (sorry to slow down the boot):
if [ -z "$container" ]; then
echo "Mounting non-root local filesystems:"
- sleep 3
if /bin/grep -wq devpts /proc/mounts ; then
# This pipe after the mount command is just to convert the new
# mount verbose output back to the old format that contained
# more useful information:
- /sbin/mount -a -v -t nonfs,nosmbfs,nocifs,noproc,nosysfs,nodevpts | grep successfully | cut -f 1 -d : | tr -d ' ' | while read dev ; do mount | grep "${dev} " ; done
+ /sbin/mount -a -v -t nonfs,nosmbfs,nocifs,noproc,nosysfs,nodevpts | grep successfully | cut -f 1 -d : | tr -d ' ' | while read dev ; do mount | grep " ${dev} " ; done
else
- /sbin/mount -a -v -t nonfs,nosmbfs,nocifs,noproc,nosysfs | grep successfully | cut -f 1 -d : | tr -d ' ' | while read dev ; do mount | grep "${dev} " ; done
+ /sbin/mount -a -v -t nonfs,nosmbfs,nocifs,noproc,nosysfs | grep successfully | cut -f 1 -d : | tr -d ' ' | while read dev ; do mount | grep " ${dev} " ; done
fi
fi
@@ -411,13 +406,23 @@ if [ -x /etc/rc.d/rc.cgmanager -a -d /sys/fs/cgroup ]; then
/etc/rc.d/rc.cgmanager start
fi
+# Start libcgroup services:
+if [ -x /etc/rc.d/rc.cgconfig -a -x /etc/rc.d/rc.cgred -a -d /sys/fs/cgroup ]; then
+ /etc/rc.d/rc.cgconfig start ; echo " /usr/sbin/cgconfigparser -l /etc/cgconfig.conf"
+ /etc/rc.d/rc.cgred start
+fi
+
# Clean up some temporary files:
rm -f /var/run/* /var/run/*/* /var/run/*/*/* /etc/nologin \
/etc/dhcpc/*.pid /etc/forcefsck /etc/fastboot \
/var/state/saslauthd/saslauthd.pid \
/tmp/.Xauth* 1> /dev/null 2> /dev/null
+if [ -d /var/lib/pkgtools/setup/tmp ]; then
+ ( cd /var/lib/pkgtools/setup/tmp && rm -rf * )
+elif [ -d /var/log/setup/tmp ]; then
( cd /var/log/setup/tmp && rm -rf * )
- ( cd /tmp && rm -rf kde-[a-zA-Z]* ksocket-[a-zA-Z]* hsperfdata_[a-zA-Z]* plugtmp* )
+fi
+( cd /tmp && rm -rf kde-[a-zA-Z]* ksocket-[a-zA-Z]* hsperfdata_[a-zA-Z]* plugtmp* )
# Clear /var/lock/subsys:
if [ -d /var/lock/subsys ]; then
@@ -471,4 +476,3 @@ else
dd if=/dev/urandom of=/etc/random-seed count=1 bs=512 2> /dev/null
fi
chmod 600 /etc/random-seed
-
diff --git a/source/ap/lxc/scripts/rc.S.orig b/source/ap/lxc/scripts/rc.S.orig
index 78e68e40..4162938f 100644
--- a/source/ap/lxc/scripts/rc.S.orig
+++ b/source/ap/lxc/scripts/rc.S.orig
@@ -73,7 +73,6 @@ if grep -wq cgroup /proc/filesystems ; then
fi
fi
-
# Initialize the Logical Volume Manager.
# This won't start unless we find /etc/lvmtab (LVM1) or
# /etc/lvm/backup/ (LVM2). This is created by /sbin/vgscan, so to
@@ -177,11 +176,6 @@ fi
# Enable swapping:
/sbin/swapon -a 2> /dev/null
-# Start FUSE, if requested:
-if [ -x /etc/rc.d/rc.fuse ]; then
- /etc/rc.d/rc.fuse start
-fi
-
# Set the tick and frequency for the system clock.
# Default values are: TICK=10000 and FREQ=0
TICK=10000
@@ -235,8 +229,13 @@ if [ -r /etc/forcefsck ]; then
FORCEFSCK="-f"
fi
-# Check the root filesystem:
-if [ ! $READWRITE = yes ]; then
+# If we're using F2FS for the root filesystem, don't check it as it doesn't
+# allow checking a read-only filesystem:
+if grep -q ' / f2fs ' /proc/mounts ; then
+ echo "Remounting root device with read-write enabled."
+ /sbin/mount -w -v -n -o remount /
+elif [ ! $READWRITE = yes ]; then
+ # Check the root filesystem:
RETVAL=0
if [ ! -r /etc/fastboot ]; then
echo "Checking root filesystem:"
@@ -275,7 +274,6 @@ if [ ! $READWRITE = yes ]; then
/sbin/umount -a -r
/sbin/mount -n -o remount,ro /
echo "Rebooting system."
- sleep 2
reboot -f
fi
# Remount the root filesystem in read-write mode
@@ -298,22 +296,22 @@ else
echo "to the Linux section in your /etc/lilo.conf and type 'lilo' to reinstall it."
fi # Done checking root filesystem
-
-# Any /etc/mtab that exists here is old, so we start with a new one:
-/bin/rm -f /etc/mtab{,~,.tmp} && /bin/touch /etc/mtab
-
-# Add entry for / to /etc/mtab:
-/sbin/mount -f -w /
-
-# Add /proc, /sys, and /dev/shm mounts to /etc/mtab:
-if [ -d /proc/sys ]; then
- /sbin/mount -f -t proc proc /proc
-fi
-if [ -d /sys/bus ]; then
- /sbin/mount -f -t sysfs sysfs /sys
-fi
-if grep -q '^[^ ]\+ /dev/shm ' /proc/mounts 2> /dev/null ; then
- /sbin/mount -f -t tmpfs tmpfs /dev/shm
+# If /etc/mtab is a symlink (probably to /proc/mounts) then we don't want to mess with it.
+if [ ! -L /etc/mtab -o ! -r /etc/mtab ]; then
+ # /etc/mtab is a file (or doesn't exist), so we'll handle it the old way:
+ # Any /etc/mtab that exists here is old, so we start with a new one:
+ /bin/rm -f /etc/mtab{,~,.tmp} && /bin/touch /etc/mtab
+ # Add /, /proc, /sys, and /dev/shm mounts to /etc/mtab:
+ /sbin/mount -f -w /
+ if [ -d /proc/sys ]; then
+ /sbin/mount -f -t proc proc /proc
+ fi
+ if [ -d /sys/bus ]; then
+ /sbin/mount -f -t sysfs sysfs /sys
+ fi
+ if grep -q '^[^ ]\+ /dev/shm ' /proc/mounts 2> /dev/null ; then
+ /sbin/mount -f -t tmpfs tmpfs /dev/shm
+ fi
fi
# Configure ISA Plug-and-Play devices:
@@ -359,17 +357,14 @@ fi
# because those have already been mounted. Also check that
# devpts is not already mounted before attempting to mount
# it. With a 2.6.x or newer kernel udev mounts devpts.
-# We also need to wait a little bit to let USB and other
-# hotplugged devices settle (sorry to slow down the boot):
echo "Mounting non-root local filesystems:"
-sleep 3
if /bin/grep -wq devpts /proc/mounts ; then
# This pipe after the mount command is just to convert the new
# mount verbose output back to the old format that contained
# more useful information:
- /sbin/mount -a -v -t nonfs,nosmbfs,nocifs,noproc,nosysfs,nodevpts | grep successfully | cut -f 1 -d : | tr -d ' ' | while read dev ; do mount | grep "${dev} " ; done
+ /sbin/mount -a -v -t nonfs,nosmbfs,nocifs,noproc,nosysfs,nodevpts | grep successfully | cut -f 1 -d : | tr -d ' ' | while read dev ; do mount | grep " ${dev} " ; done
else
- /sbin/mount -a -v -t nonfs,nosmbfs,nocifs,noproc,nosysfs | grep successfully | cut -f 1 -d : | tr -d ' ' | while read dev ; do mount | grep "${dev} " ; done
+ /sbin/mount -a -v -t nonfs,nosmbfs,nocifs,noproc,nosysfs | grep successfully | cut -f 1 -d : | tr -d ' ' | while read dev ; do mount | grep " ${dev} " ; done
fi
# Enable swapping again. This is needed in case a swapfile is used,
@@ -382,13 +377,23 @@ if [ -x /etc/rc.d/rc.cgmanager -a -d /sys/fs/cgroup ]; then
/etc/rc.d/rc.cgmanager start
fi
+# Start libcgroup services:
+if [ -x /etc/rc.d/rc.cgconfig -a -x /etc/rc.d/rc.cgred -a -d /sys/fs/cgroup ]; then
+ /etc/rc.d/rc.cgconfig start ; echo " /usr/sbin/cgconfigparser -l /etc/cgconfig.conf"
+ /etc/rc.d/rc.cgred start
+fi
+
# Clean up some temporary files:
rm -f /var/run/* /var/run/*/* /var/run/*/*/* /etc/nologin \
/etc/dhcpc/*.pid /etc/forcefsck /etc/fastboot \
/var/state/saslauthd/saslauthd.pid \
/tmp/.Xauth* 1> /dev/null 2> /dev/null
+if [ -d /var/lib/pkgtools/setup/tmp ]; then
+ ( cd /var/lib/pkgtools/setup/tmp && rm -rf * )
+elif [ -d /var/log/setup/tmp ]; then
( cd /var/log/setup/tmp && rm -rf * )
- ( cd /tmp && rm -rf kde-[a-zA-Z]* ksocket-[a-zA-Z]* hsperfdata_[a-zA-Z]* plugtmp* )
+fi
+( cd /tmp && rm -rf kde-[a-zA-Z]* ksocket-[a-zA-Z]* hsperfdata_[a-zA-Z]* plugtmp* )
# Clear /var/lock/subsys:
if [ -d /var/lock/subsys ]; then
@@ -442,4 +447,3 @@ else
dd if=/dev/urandom of=/etc/random-seed count=1 bs=512 2> /dev/null
fi
chmod 600 /etc/random-seed
-
diff --git a/source/ap/lxc/scripts/rc.inet1.lxc b/source/ap/lxc/scripts/rc.inet1.lxc
index 58213a7c..2ae9bbb5 100644
--- a/source/ap/lxc/scripts/rc.inet1.lxc
+++ b/source/ap/lxc/scripts/rc.inet1.lxc
@@ -1,4 +1,4 @@
-#! /bin/sh
+#!/bin/bash
# /etc/rc.d/rc.inet1
# This script is used to bring up the various network interfaces.
#
@@ -215,19 +215,28 @@ if_up() {
# 15 seconds should be a reasonable default DHCP timeout. 30 was too much.
echo "/etc/rc.d/rc.inet1: /sbin/dhcpcd -L -t ${DHCP_TIMEOUT[$i]:-15} ${DHCP_OPTIONS} ${1}" | $LOGGER
/sbin/dhcpcd -L -t ${DHCP_TIMEOUT[$i]:-15} ${DHCP_OPTIONS} ${1}
- # If the dhcpcd call succeeds, add extra IP addresses, if defined, to interface
- if [ "$?" == "0" ] && [ -n "${IPALIASES[$i]}" ]; then
- num=0
- for ipalias in ${IPALIASES[$i]}; do
- /sbin/ip address add ${ipalias}/32 dev ${1} label ${1}:${num} ;
- num=$(($num + 1))
- done
+ if [ "$?" == "0" ]; then # the dhcp call has succeeded
+ if [ -n "${IPALIASES[$i]}" ]; then
+ # Add extra IP addresses, if defined, to interface
+ num=0
+ for ipalias in ${IPALIASES[$i]}; do
+ ip="${ipalias%/*}"
+ nm="${ipalias#*/}"
+ [ -z "$nm" ] || [ "$ip" == "$nm" ] && nm="32"
+ /sbin/ip address add ${ip}/${nm} dev ${1} label ${1}:${num}
+ num=$(($num + 1))
+ done
+ fi
+ if [ "${PROMISCUOUS[$i]}" = "yes" ]; then
+ # Set promiscuous mode on the interface
+ /sbin/ip link set dev ${1} promisc on
+ fi
fi
else # bring up interface using a static IP address
if [ -n "${IPADDR[$i]}" ]; then # skip unconfigured interfaces
# Set up the network card:
- echo "/etc/rc.d/rc.inet1: /sbin/ip address add ${IPADDR[$i]}/${NETMASK[$i]} dev ${1}" | $LOGGER
- /sbin/ip address add ${IPADDR[$i]}/${NETMASK[$i]} dev ${1}
+ echo "/etc/rc.d/rc.inet1: /sbin/ip address add ${IPADDR[$i]}/${NETMASK[$i]} broadcast + dev ${1}" | $LOGGER
+ /sbin/ip address add ${IPADDR[$i]}/${NETMASK[$i]} broadcast + dev ${1}
if /sbin/ip link show dev ${1} | grep -wq "state DOWN" ; then
/sbin/ip link set dev ${1} up # Bring up interface
fi
@@ -235,10 +244,17 @@ if_up() {
if [ -n "${IPALIASES[$i]}" ]; then
num=0
for ipalias in ${IPALIASES[$i]}; do
- /sbin/ip address add ${ipalias}/32 dev ${1} label ${1}:${num} ;
+ ip="${ipalias%/*}"
+ nm="${ipalias#*/}"
+ [ -z "$nm" ] || [ "$ip" == "$nm" ] && nm="32"
+ /sbin/ip address add ${ip}/${nm} dev ${1} label ${1}:${num}
num=$(($num + 1))
done
fi
+ if [ "${PROMISCUOUS[$i]}" = "yes" ]; then
+ # Set promiscuous mode on the interface
+ /sbin/ip link set dev ${1} promisc on
+ fi
else
debug_log "${1} interface is not configured in /etc/rc.d/rc.inet1.conf"
fi
@@ -279,6 +295,8 @@ if_down() {
if [ -n "${BRNICS[$i]}" ]; then
br_close $i
fi
+ # Flush the address from the interface:
+ ip address flush dev ${1}
fi
}
diff --git a/source/ap/lxc/scripts/rc.inet1.orig b/source/ap/lxc/scripts/rc.inet1.orig
index 2f566ef8..cf9da0f4 100644
--- a/source/ap/lxc/scripts/rc.inet1.orig
+++ b/source/ap/lxc/scripts/rc.inet1.orig
@@ -1,4 +1,4 @@
-#! /bin/sh
+#!/bin/bash
# /etc/rc.d/rc.inet1
# This script is used to bring up the various network interfaces.
#
@@ -204,19 +204,28 @@ if_up() {
# 15 seconds should be a reasonable default DHCP timeout. 30 was too much.
echo "/etc/rc.d/rc.inet1: /sbin/dhcpcd -L -t ${DHCP_TIMEOUT[$i]:-15} ${DHCP_OPTIONS} ${1}" | $LOGGER
/sbin/dhcpcd -L -t ${DHCP_TIMEOUT[$i]:-15} ${DHCP_OPTIONS} ${1}
- # If the dhcpcd call succeeds, add extra IP addresses, if defined, to interface
- if [ "$?" == "0" ] && [ -n "${IPALIASES[$i]}" ]; then
- num=0
- for ipalias in ${IPALIASES[$i]}; do
- /sbin/ip address add ${ipalias}/32 dev ${1} label ${1}:${num} ;
- num=$(($num + 1))
- done
+ if [ "$?" == "0" ]; then # the dhcp call has succeeded
+ if [ -n "${IPALIASES[$i]}" ]; then
+ # Add extra IP addresses, if defined, to interface
+ num=0
+ for ipalias in ${IPALIASES[$i]}; do
+ ip="${ipalias%/*}"
+ nm="${ipalias#*/}"
+ [ -z "$nm" ] || [ "$ip" == "$nm" ] && nm="32"
+ /sbin/ip address add ${ip}/${nm} dev ${1} label ${1}:${num}
+ num=$(($num + 1))
+ done
+ fi
+ if [ "${PROMISCUOUS[$i]}" = "yes" ]; then
+ # Set promiscuous mode on the interface
+ /sbin/ip link set dev ${1} promisc on
+ fi
fi
else # bring up interface using a static IP address
if [ -n "${IPADDR[$i]}" ]; then # skip unconfigured interfaces
# Set up the network card:
- echo "/etc/rc.d/rc.inet1: /sbin/ip address add ${IPADDR[$i]}/${NETMASK[$i]} dev ${1}" | $LOGGER
- /sbin/ip address add ${IPADDR[$i]}/${NETMASK[$i]} dev ${1}
+ echo "/etc/rc.d/rc.inet1: /sbin/ip address add ${IPADDR[$i]}/${NETMASK[$i]} broadcast + dev ${1}" | $LOGGER
+ /sbin/ip address add ${IPADDR[$i]}/${NETMASK[$i]} broadcast + dev ${1}
if /sbin/ip link show dev ${1} | grep -wq "state DOWN" ; then
/sbin/ip link set dev ${1} up # Bring up interface
fi
@@ -224,10 +233,17 @@ if_up() {
if [ -n "${IPALIASES[$i]}" ]; then
num=0
for ipalias in ${IPALIASES[$i]}; do
- /sbin/ip address add ${ipalias}/32 dev ${1} label ${1}:${num} ;
+ ip="${ipalias%/*}"
+ nm="${ipalias#*/}"
+ [ -z "$nm" ] || [ "$ip" == "$nm" ] && nm="32"
+ /sbin/ip address add ${ip}/${nm} dev ${1} label ${1}:${num}
num=$(($num + 1))
done
fi
+ if [ "${PROMISCUOUS[$i]}" = "yes" ]; then
+ # Set promiscuous mode on the interface
+ /sbin/ip link set dev ${1} promisc on
+ fi
else
debug_log "${1} interface is not configured in /etc/rc.d/rc.inet1.conf"
fi
@@ -268,6 +284,8 @@ if_down() {
if [ -n "${BRNICS[$i]}" ]; then
br_close $i
fi
+ # Flush the address from the interface:
+ ip address flush dev ${1}
fi
}
generated by cgit v1.2.3 (git 2.26.2) at 2024-11-05 16:41:51 +0000