diff options
Diffstat (limited to 'source/d/perl/perl.SlackBuild')
| -rwxr-xr-x | source/d/perl/perl.SlackBuild | 267 |
1 files changed, 267 insertions, 0 deletions
diff --git a/source/d/perl/perl.SlackBuild b/source/d/perl/perl.SlackBuild new file mode 100755 index 00000000..9aa963d6 --- /dev/null +++ b/source/d/perl/perl.SlackBuild @@ -0,0 +1,267 @@ +#!/bin/sh + +# Copyright 2009 Patrick J. Volkerding, Sebeka, MN, USA +# All rights reserved. +# +# Redistribution and use of this script, with or without modification, is +# permitted provided that the following conditions are met: +# +# 1. Redistributions of this script must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# +# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO +# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + + +# originally by: David Cantrell <david@slackware.com> +# maintained by: <volkerdi@slackware.com> + +VERSION=5.10.0 +# IMPORTANT: also update -Dinc_version_list in ./configure below! + +ARCH=${ARCH:-x86_64} +BUILD=${BUILD:-2} + +CWD=$(pwd) +TMP=${TMP:-/tmp} +PKG=$TMP/package-perl + +# Additional required modules: +DBI=1.607 +DBDMYSQL=4.008 +XMLPARSER=2.36 +XMLSIMPLE=2.18 +URI=1.37 + +if [ "$ARCH" = "i386" ]; then + SLKCFLAGS="-O2 -march=i386 -mcpu=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "i486" ]; then + SLKCFLAGS="-O2 -march=i486 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "s390" ]; then + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "x86_64" ]; then + SLKCFLAGS="-O2 -fPIC" + LIBDIRSUFFIX="64" +fi + +if [ -x /usr/bin/perl ]; then + echo "Perl detected." + echo + echo "It's a good idea to remove your existing perl first." + echo + sleep 15 +fi + +# Clear build location: +rm -rf $PKG +mkdir -p $PKG + +# Extract the source code: +cd $TMP +rm -rf perl-$VERSION +tar xvf $CWD/perl-$VERSION.tar.bz2 + +# Change into the source directory: +cd perl-$VERSION + +# Adjust owner/perms to standard values: +chown -R root:root . +find . \ + \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ + -exec chmod 755 {} \; -o \ + \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ + -exec chmod 644 {} \; + +# If after all this time you still don't trust threads, comment +# out the variable below: +# +USE_THREADS="-Dusethreads -Duseithreads" + +if [ "$ARCH" = "x86_64" ]; then # adopted from "Cross Linux From Scratch" + # Configure must be told to also use lib64: + zcat $CWD/perl.configure.multilib.patch.gz | patch -p1 --verbose || exit 1 + # "perl -V" should report that libc is in /lib64 + sed -i -e '/libc/s#/lib/#/lib64/#' hints/linux.sh + # make perl use lib64: + echo 'installstyle="lib64/perl5"' >>hints/linux.sh +fi + +# We no longer include suidperl. To quote the INSTALL file: +# +# Because of the buggy history of suidperl, and the difficulty +# of properly security auditing as large and complex piece of +# software as Perl, we cannot recommend using suidperl and the feature +# should be considered deprecated. +# Instead use for example 'sudo': http://www.courtesan.com/sudo/ + +# Configure perl: +./Configure -de \ + -Dprefix=/usr \ + -Dvendorprefix=/usr \ + -Dcccdlflags='-fPIC' \ + -Dinstallprefix=/usr \ + -Dlibpth="/usr/local/lib${LIBDIRSUFFIX} /usr/lib${LIBDIRSUFFIX} /lib${LIBDIRSUFFIX}" \ + -Doptimize="$SLKCFLAGS" \ + $USE_THREADS \ + -Dpager='/usr/bin/less -isr' \ + -Dinc_version_list='5.8.8 5.8.7 5.8.6 5.8.5 5.8.4 5.8.3 5.8.2 5.8.1 5.8.0' \ + -Darchname=$ARCH-linux + +# Kludge for gcc-4.2.4's needlessly changed output: +cat makefile | grep -v '\<command-line\>' > foo +mv foo makefile +cat x2p/makefile | grep -v '\<command-line\>' > foo +mv foo x2p/makefile + +# Build perl +make -j6 || exit 1 +make test + +# Install perl (needed to build modules): +make install +( cd /usr/bin + ln -sf perl$VERSION perl + ln -sf c2ph pstruct + ln -sf s2p psed +) +mkdir -p /usr/lib${LIBDIRSUFFIX}/perl5/vendor_perl/${VERSION}/${ARCH}-linux-thread-multi + +# Install perl package: +make install DESTDIR=$PKG +mkdir -p $PKG/usr/lib${LIBDIRSUFFIX}/perl5/vendor_perl/${VERSION}/${ARCH}-linux-thread-multi + +# Add additional modules: +( cd ext + ( tar xzvf $CWD/DBI-${DBI}.tar.gz + cd DBI-${DBI} + chown -R root:root . + perl Makefile.PL INSTALLDIRS=vendor + make + make test + make install + make install DESTDIR=$PKG + mkdir -p $PKG/usr/doc/perl-$VERSION/DBI-${DBI} + cp -a README $PKG/usr/doc/perl-$VERSION/DBI-${DBI} + chmod 644 $PKG/usr/doc/perl-$VERSION/DBI-${DBI}/README + ) + ( tar xzvf $CWD/DBD-mysql-${DBDMYSQL}.tar.gz + cd DBD-mysql-${DBDMYSQL} + chown -R root:root . + perl Makefile.PL INSTALLDIRS=vendor + make + make test + make install + make install DESTDIR=$PKG + mkdir -p $PKG/usr/doc/perl-$VERSION/DBD-mysql-${DBDMYSQL} + cp -a INSTALL.html README TODO $PKG/usr/doc/perl-$VERSION/DBD-mysql-${DBDMYSQL} + chmod 644 $PKG/usr/doc/perl-$VERSION/DBD-mysql-${DBDMYSQL}/* + ) + ( tar xzvf $CWD/XML-Parser-${XMLPARSER}.tar.gz + cd XML-Parser-${XMLPARSER} + chown -R root:root . + perl Makefile.PL INSTALLDIRS=vendor + make + make test + make install + make install DESTDIR=$PKG + mkdir -p $PKG/usr/doc/perl-$VERSION/XML-Parser-${XMLPARSER} + cp -a README $PKG/usr/doc/perl-$VERSION/XML-Parser-${XMLPARSER} + chmod 644 $PKG/usr/doc/perl-$VERSION/XML-Parser-${XMLPARSER}/* + ) + ( tar xzvf $CWD/XML-Simple-${XMLSIMPLE}.tar.gz + cd XML-Simple-${XMLSIMPLE} + chown -R root:root . + perl Makefile.PL INSTALLDIRS=vendor + make + make test + make install + make install DESTDIR=$PKG + mkdir -p $PKG/usr/doc/perl-$VERSION/XML-Simple${XMLSIMPLE} + cp -a README $PKG/usr/doc/perl-$VERSION/XML-Simple${XMLSIMPLE} + chmod 644 $PKG/usr/doc/perl-$VERSION/XML-Simple${XMLSIMPLE}/* + ) + ( tar xzvf $CWD/URI-${URI}.tar.gz + cd URI-${URI} + chown -R root:root . + perl Makefile.PL INSTALLDIRS=vendor + make + make test + make install + make install DESTDIR=$PKG + mkdir -p $PKG/usr/doc/perl-$VERSION/URI-${URI} + cp -a README $PKG/usr/doc/perl-$VERSION/URI-${URI} + chmod 644 $PKG/usr/doc/perl-$VERSION/URI-${URI}/* + ) +) + +# Strip everything: +( cd $PKG + find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null + find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null +) + +# There are also miniperl and microperl. +# I haven't had any requests for them, but would be willing +# to consider adding one or both to the package if anyone +# actually needs them for some reason. +#make microperl + +# Symlinks that replace hard links +( cd $PKG/usr/bin + ln -sf perl$VERSION perl + ln -sf c2ph pstruct + ln -sf s2p psed ) + +# Install documentation +mkdir -p $PKG/usr/doc/perl-$VERSION +cp -a \ + AUTHORS Artistic Copying INSTALL MANIFEST README README.Y2K README.cn \ + README.jp README.ko README.micro README.tw Todo.micro \ + $PKG/usr/doc/perl-$VERSION + +# We follow LSB with symlinks in /usr/share: +( cd $PKG/usr/share + mv man .. ) +( cd $PKG/usr/man/man1 + mkdir foo + cp *.1 foo + rm *.1 + mv foo/* . + rmdir foo + gzip -9 * + ln -sf c2ph.1.gz pstruct.1.gz + ln -sf s2p.1.gz psed.1.gz ) +( cd $PKG/usr/man/man3 + gzip -9 * ) + +chmod 755 $PKG/usr/bin/* +chmod 644 $PKG/usr/man/man?/* +rmdir $PKG/usr/share + +# This file shouldn't get clobbered: +if [ -r $PKG/usr/lib${LIBDIRSUFFIX}/perl5/${VERSION}/${ARCH}-linux-thread-multi/perllocal.pod ]; then + mv $PKG/usr/lib${LIBDIRSUFFIX}/perl5/${VERSION}/${ARCH}-linux-thread-multi/perllocal.pod $PKG/usr/lib${LIBDIRSUFFIX}/perl5/${VERSION}/${ARCH}-linux-thread-multi/perllocal.pod.new +fi + +# Insert the slack-desc: +mkdir -p $PKG/install +cat $CWD/slack-desc > $PKG/install/slack-desc +zcat $CWD/doinst.sh.gz | \ + sed -e "s#/lib/#/lib${LIBDIRSUFFIX}/#" | sed -e "s#i486#$ARCH#" \ + > $PKG/install/doinst.sh + +# Build the package: +cd $PKG +makepkg -l y -c n $TMP/perl-$VERSION-$ARCH-$BUILD.txz + |