1 files changed, 142 insertions, 0 deletions
diff --git a/source/installer/sources/dropbear/dropbear.Slackbuild b/source/installer/sources/dropbear/dropbear.Slackbuild
new file mode 100755
index 00000000..9cc78b3e
--- /dev/null
+++ b/source/installer/sources/dropbear/dropbear.Slackbuild
@@ -0,0 +1,142 @@
+#!/bin/sh
+# $Id: dropbear.Slackbuild,v 1.7 2008/03/13 13:42:33 root Exp root $
+#  Copyright 2007, Piter Punk, São Paulo, Brazil 
+# Adaptations for Slackware installer:
+#  Copyright 2008, Eric Hameleers, Eindhoven, Netherlands
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PRGNAM=dropbear
+VERSION=2012.55
+BUILD=${BUILD:-11}
+TAG=${TAG:-''}
+
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i486 ;;
+    arm*) ARCH=arm ;;
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+# The programs we want to have as symlinks to dropbearmulti binary:
+PROGS="dropbear dbclient dropbearkey dropbearconvert scp ssh"
+
+# We build for the Slackware installer:
+#  This means, installing into /bin and /sbin ;
+#  and adding symlinks for ssh and scp without worry
+#  about overwriting any pre-existing binaries.
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/pkg-$PRGNAM
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP || exit 1
+rm -rf $PRGNAM-$VERSION
+tar xvf $CWD/$PRGNAM-$VERSION.tar.bz2 || exit 1
+cd $PRGNAM-$VERSION || exit 1
+
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+# Patch to allow empty passwords (used in Slackware's installer):
+patch -p1 < $CWD/dropbear_emptypass.patch
+# Apply xauth path patch
+patch -p0 < $CWD/dropbear.xauth.patch
+# Change the path used for dbclient because our prefix is '/' not '/usr':
+patch -p1 < $CWD/dropbear_dbclientpath.patch
+# Patch for new glibc crypt() that may return NULL:
+patch -p1 < $CWD/dropbear.glibc.crypt.diff
+
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/ \
+  --mandir=/usr/man \
+  --disable-syslog \
+  --disable-utmp \
+  --disable-utmpx \
+  --disable-wtmp \
+  --disable-wtmpx \
+  --disable-pututline \
+  --disable-pututxline \
+  --build=$ARCH-slackware-linux
+
+make PROGRAMS="$PROGS" MULTI="1" SCPPROGRESS="1" || exit 1
+mkdir -p $PKG/sbin $PKG/bin $PKG/lib
+make DESTDIR=$PKG MULTI="1" install || exit 1
+
+# Copy manpages to package
+mkdir -p $PKG/usr/man/man1
+mkdir -p $PKG/usr/man/man8
+cp dbclient.1 $PKG/usr/man/man1
+cp dropbearkey.8 dropbear.8 $PKG/usr/man/man8
+
+if [ -d $PKG/usr/man ]; then
+  find $PKG/usr/man -type f -exec gzip -9 {} \;
+  for i in $( find $PKG/usr/man -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done
+fi
+
+# Link binaries to dropbearmulti since the 'make install' does not do that
+# if we build a multicall binary.
+(cd $PKG/bin
+ ln -s ../bin/dropbearmulti ../sbin/dropbear
+ for i in $(echo $PROGS | sed -e 's/dropbear //') ; do
+   ln -s dropbearmulti $i
+ done
+)
+
+make install DESTDIR=$PKG
+
+find $PKG -print0 | xargs -0 file | grep -e "executable" -e "shared object" | \
+  grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+mkdir -p $PKG/etc/rc.d $PKG/etc/dropbear
+cp $CWD/rc.dropbear.new $PKG/etc/rc.d/ # doinst.sh will handle .new
+
+mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
+cp -a CHANGES INSTALL LICENSE MULTI README SMALL TODO \
+  $PKG/usr/doc/$PRGNAM-$VERSION
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+cat $CWD/doinst.sh  > $PKG/install/doinst.sh
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.tgz