diff options
Diffstat (limited to 'source/installer/sources/initrd/scripts/network.sh')
| -rw-r--r-- | source/installer/sources/initrd/scripts/network.sh | 155 |
1 files changed, 155 insertions, 0 deletions
diff --git a/source/installer/sources/initrd/scripts/network.sh b/source/installer/sources/initrd/scripts/network.sh new file mode 100644 index 00000000..499251c4 --- /dev/null +++ b/source/installer/sources/initrd/scripts/network.sh @@ -0,0 +1,155 @@ +#!/bin/sh + +# Remove extra whitespace +crunch() { + while read line ; do + echo $line + done +} + +echo +echo "******* Welcome to the network supplemental disk! *******" +echo + +# main loop: +while [ 0 ]; do + +echo "-- Press [enter] to automatically probe for all network cards, or switch" +echo " to a different console and use 'modprobe' to load the modules manually." +echo "-- To skip probing some modules (in case of hangs), enter them after an S:" +echo " S eepro100 ne2k-pci" +echo "-- To probe only certain modules, enter them after a P like this:" +echo " P 3c503 3c505 3c507" +echo "-- To get a list of network modules, enter an L." +echo "-- To skip the automatic probe entirely, enter a Q now." +echo + +# Clear "card found" flag: +rm -f /cardfound + +echo -n "network> " +read INPUT; +echo + +if [ "`echo $INPUT | crunch | cut -f 1 -d ' '`" = "L" \ + -o "`echo $INPUT | crunch | cut -f 1 -d ' '`" = "l" ]; then + echo "Available network modules:" + for file in /lib/modules/`uname -r`/kernel/drivers/net/* /lib/modules/`uname -r`/kernel/arch/i386/kernel/* /lib/modules/`uname -r`/kernel/drivers/pnp/* ; do + if [ -r $file ]; then + OUTPUT=`basename $file .gz` + OUTPUT=`basename $OUTPUT .o` + echo -n "$OUTPUT " + fi + done + echo + echo + continue +fi + +if [ ! "$INPUT" = "q" -a ! "$INPUT" = "Q" \ + -a ! "`echo $INPUT | crunch | cut -f 1 -d ' '`" = "P" \ + -a ! "`echo $INPUT | crunch | cut -f 1 -d ' '`" = "p" ]; then + echo "Probing for PCI/EISA network cards:" + for card in \ + 3c59x acenic de4x5 dgrs eepro100 e1000 e1000e e100 epic100 hp100 ne2k-pci olympic pcnet32 rcpci 8139too 8139cp tulip via-rhine r8169 atl1e sktr yellowfin tg3 dl2k ns83820 \ + ; do + SKIP="" + if [ "`echo $INPUT | crunch | cut -f 1 -d ' '`" = "S" \ + -o "`echo $INPUT | crunch | cut -f 1 -d ' '`" = "s" ]; then + for nogood in `echo $INPUT | crunch | cut -f 2- -d ' '` ; do + if [ "$card" = "$nogood" ]; then + SKIP=$card + fi + done + fi + if [ "$SKIP" = "" ]; then + echo "Probing for card using the $card module..." + modprobe $card 2> /dev/null + grep -q eth0 /proc/net/dev + if [ $? = 0 ]; then + echo + echo "SUCCESS: found card using $card protocol -- modules loaded." + echo "$card" > /cardfound + echo + break + else + modprobe -r $card 2> /dev/null + fi + else + echo "Skipping module $card..." + fi + done + echo + if [ ! -r /cardfound ]; then + # Don't probe for com20020... it loads on any machine with or without the card. + echo "Probing for MCA, ISA, and other PCI network cards:" + # removed because it needs an irq parameter: arlan + # tainted, no autoprobe: (arcnet) com90io com90xx + for card in depca ibmtr 3c501 3c503 3c505 3c507 3c509 3c515 ac3200 \ + acenic at1700 cosa cs89x0 de4x5 de600 \ + de620 e2100 eepro eexpress es3210 eth16i ewrk3 fmv18x forcedeth hostess_sv11 \ + hp-plus hp lne390 ne3210 ni5010 ni52 ni65 sb1000 sealevel smc-ultra \ + sis900 smc-ultra32 smc9194 wd ; do + SKIP="" + if [ "`echo $INPUT | crunch | cut -f 1 -d ' '`" = "S" \ + -o "`echo $INPUT | crunch | cut -f 1 -d ' '`" = "s" ]; then + for nogood in `echo $INPUT | crunch | cut -f 2- -d ' '` ; do + if [ "$card" = "$nogood" ]; then + SKIP=$card + fi + done + fi + if [ "$SKIP" = "" ]; then + echo "Probing for card using the $card module..." + modprobe $card 2> /dev/null + grep -q eth0 /proc/net/dev + if [ $? = 0 ]; then + echo + echo "SUCCESS: found card using $card protocol -- modules loaded." + echo "$card" > /cardfound + echo + break + else + modprobe -r $card 2> /dev/null + fi + else + echo "Skipping module $card..." + fi + done + echo + fi + if [ ! -r /cardfound ]; then + echo "Sorry, but no network card was detected. Some cards (like non-PCI" + echo "NE2000s) must be supplied with the I/O address to use. If you have" + echo "an NE2000, you can switch to another console (Alt-F2), log in, and" + echo "load it with a command like this:" + echo + echo " modprobe ne io=0x360" + echo + fi +elif [ "`echo $INPUT | crunch | cut -f 1 -d ' '`" = "P" \ + -o "`echo $INPUT | crunch | cut -f 1 -d ' '`" = "p" ]; then + echo "Probing for a custom list of modules:" + for card in `echo $INPUT | crunch | cut -f 2- -d ' '` ; do + echo "Probing for card using the $card module..." + modprobe $card 2> /dev/null + grep -q eth0 /proc/net/dev + if [ $? = 0 ]; then + echo + echo "SUCCESS: found card using $card protocol -- modules loaded." + echo "$card" > /cardfound + echo + break + else + modprobe -r $card 2> /dev/null + fi + done + echo +else + echo "Skipping automatic module probe." + echo +fi + +# end main loop +break +done |