diff options
Diffstat (limited to 'source/k/packaging-x86/kernel-modules')
3 files changed, 1010 insertions, 0 deletions
diff --git a/source/k/packaging-x86/kernel-modules/kernel-modules.SlackBuild b/source/k/packaging-x86/kernel-modules/kernel-modules.SlackBuild new file mode 100755 index 00000000..5601b28f --- /dev/null +++ b/source/k/packaging-x86/kernel-modules/kernel-modules.SlackBuild @@ -0,0 +1,67 @@ +#!/bin/sh +CWD=`pwd` +TMP=${TMP:-/tmp} +PKG=$TMP/package-kernel-modules + +VERSION=${VERSION:-3.2.29} +ARCH=${ARCH:-i686} +BUILD=${BUILD:-1} + +if [ ! -d $TMP ]; then + mkdir -p $TMP +fi +rm -rf $PKG +mkdir -p $PKG +echo "Using /lib/modules/${VERSION}/" +echo "Make sure these are *ready*... compressed, or not." +echo "However you want 'em." +sleep 5 +mkdir -p $PKG/lib/modules +cp -a /lib/modules/${VERSION} $PKG/lib/modules +mkdir -p $PKG/etc/rc.d +cat $CWD/rc.modules.new > $PKG/etc/rc.d/rc.modules-${VERSION}.new +chmod 755 $PKG/etc/rc.d/rc.modules-${VERSION}.new +mkdir -p $PKG/install +cat $CWD/slack-desc > $PKG/install/slack-desc + +# Write out the doinst.sh: +cat << EOF > $PKG/install/doinst.sh +config() { + NEW="\$1" + OLD="\$(dirname \$NEW)/\$(basename \$NEW .new)" + # If there's no config file by that name, mv it over: + if [ ! -r \$OLD ]; then + mv \$NEW \$OLD + elif [ "\$(cat \$OLD | md5sum)" = "\$(cat \$NEW | md5sum)" ]; then # toss the redundant copy + rm \$NEW + fi + # Otherwise, we leave the .new copy for the admin to consider... +} +config etc/rc.d/rc.modules-${VERSION}.new + +# If rc.modules is a real file, back it up: +if [ -r etc/rc.d/rc.modules -a ! -L etc/rc.d/rc.modules ]; then + cp -a etc/rc.d/rc.modules etc/rc.d/rc.modules.bak +fi +## Now that -smp is default, we probably shouldn't be so paranoid about +## preserving existing symlinks as it causes a full install to point to +## the wrong rc.modules script. If you want your rc.modules to endure, +## copy it to rc.modules.local. +## Make rc.modules a symlink if it's not already, but do not replace +## an existing symlink. You'll have to decide to point at a new version +## of this script on your own... +#if [ ! -L etc/rc.d/rc.modules ]; then +# ( cd etc/rc.d ; rm -rf rc.modules ) +# ( cd etc/rc.d ; ln -sf rc.modules-${VERSION} rc.modules ) +#fi + +# A good idea whenever kernel modules are added or changed: +if [ -x sbin/depmod ]; then + chroot . /sbin/depmod -a ${VERSION} 1> /dev/null 2> /dev/null +fi + +EOF + +cd $PKG +makepkg -l y -c n $TMP/kernel-modules-${VERSION}-$ARCH-$BUILD.txz + diff --git a/source/k/packaging-x86/kernel-modules/rc.modules.new b/source/k/packaging-x86/kernel-modules/rc.modules.new new file mode 100755 index 00000000..cb1fbec6 --- /dev/null +++ b/source/k/packaging-x86/kernel-modules/rc.modules.new @@ -0,0 +1,924 @@ +#!/bin/sh +# rc.modules 12.3456789 Sun May 10 05:31:26 UTC 2009 pp (rb), pjv, rlw +# +# This file loads extra drivers into the Linux kernel. +# +# The modules will be looked for under /lib/modules/<kernel version number> +# On systems using udev, this file should remain mostly commented out. +# Nearly all hardware device modules will be loaded automatically on such +# systems. This file should only be used when udev is not loading a module +# that you require, or if you are not using udev (which is going to become +# increasingly impossible...), or if you want to force a particular module +# to be loaded where alternatives exist. +# +# Many Linux kernel modules will accept extra options. The Linux kernel +# source is the best place to look for extra documentation for the various +# modules. This can be found under /usr/src/linux/Documentation if you've +# the installed the kernel sources. +# +# NOTE: This may not be a complete list of modules. If you don't see what +# you're looking for, look around in /lib/modules/2.x.x/ for an appropriate +# module. Also, if any problems arise loading or using these modules, try +# compiling and installing a custom kernel that contains the support instead. +# That always works. ;^) + +# Determine the version of the running kernel: +RELEASE=$(uname -r) + +### Update module dependencies ### +# If /usr is mounted and we have 'find', we can try to take a shortcut: +if [ -x /usr/bin/find -a -e /lib/modules/$RELEASE/modules.dep \ + -a /lib/modules/$RELEASE/modules.dep -nt /etc/modules.conf ]; then + NEWMODS="$(/usr/bin/find /lib/modules/$RELEASE -mindepth 2 -type f -newer /lib/modules/$RELEASE/modules.dep)" + # Only rebuild dependencies if new module(s) are found: + if [ ! "" = "$NEWMODS" ]; then + echo "Updating module dependencies for Linux $RELEASE:" + /sbin/depmod -a + else + echo "Module dependencies up to date (no new kernel modules found)." + fi +else # we don't have find, or there is no existing modules.dep, or it is out of date. + echo "Updating module dependencies for Linux $RELEASE:" + /sbin/depmod -A +fi + +### Mouse support: +# PS/2 mouse support: +# The default in Slackware is to use proto=imps because that works with the +# most types of mice out of the box. For example, using proto=any will +# completely break the mouse if you change consoles with several models of KVM +# switches. +# +# This is commented out here because a better place to configure the options +# for the psmouse module is in /etc/modprobe.d/psmouse. +# +#/sbin/modprobe psmouse proto=imps +# +# Serial (RS-232, COM port) mouse support: +#/sbin/modprobe sermouse +# +# Microsoft/ATI XL busmouse support: +# Microsoft busmouse (also called Inport mice) is connected to an +# expansion board using a round connector with 9 pins. Be aware that +# several vendors talk about 'Microsoft busmouse' and actually mean +# PS/2 busmouse -- so count the pins on the connector. This driver +# also supports the ATIXL mouse, a rare mouse that is connected to the +# back of an ATI video card: +#/sbin/modprobe inport +# +# Logitech mouse connected to a proprietary interface card. It's +# generally a round connector with 9 pins. Note that the newer mice +# made by Logitech don't use the Logitech protocol anymore; for those, +# you don't need this module: +#/sbin/modprobe logibm +# +# IBM PC110 palmtop digitizer pad: +#/sbin/modprobe pc110pad + +#### ACPI support ### +# Advanced Configuration and Power Interface (ACPI) support for Linux +# requires an ACPI compliant platform (hardware/firmware), and assumes +# the presence of OS-directed configuration and power management (OSPM) +# software. Linux ACPI provides a robust functional replacement for +# several legacy configuration and power management interfaces, including +# the Plug-and-Play BIOS specification (PnP BIOS), the MultiProcessor +# Specification (MPS), and the Advanced Power Management (APM) +# specification. If both ACPI and APM support are configured, whichever +# is loaded first shall be used. Also note that in many cases udev will +# load the required modules if ACPI is found to be active. +# ACPI can be disabled with the "noacpi" boot option. +# Also note that ACPI is blacklisted with our default kernel +# configurations on machines with a BIOS older than 2001-01-01. If you +# still want to try it, you'll need to use the "acpi=force" boot option. +# +# AC Adapter (indicates whether a system is on AC, or not): +#/sbin/modprobe ac +# +# Battery (adds battery information through/proc/acpi/battery): +#/sbin/modprobe battery +# +# Button (handles events on the power, sleep and lid buttons): +#/sbin/modprobe button +# +# Video. This driver implements the ACPI Extensions For Display Adapters +# for integrated graphics devices on motherboard, as specified in ACPI 2.0 +# Specification, Appendix B, allowing some basic control like defining the +# video POST device, retrieving EDID information, or to setup a video output. +# Note that this is an reference implementation only, and it may or may not +# work for your integrated video device. +#/sbin/modprobe video +# +# Fan (adds support for ACPI fan control and status): +#/sbin/modprobe fan +# +# Dock (adds support for ACPI controlled docking stations): +#/sbin/modprobe dock +# +# Bay (adds support for ACPI controlled removable drive bays such as the +# IBM UltraBay or the Dell Module Bay): +#/sbin/modprobe bay +# +# Processor. This driver installs ACPI as the idle handler for Linux, and +# uses ACPI C2 and C3 processor states to save power, on systems that +# support it. It is required by several flavors of cpufreq Performance- +# state drivers. +#/sbin/modprobe processor +# +# Thermal. This driver adds support for ACPI thermal zones. Most mobile and +# some desktop systems support ACPI thermal zones. It is HIGHLY recommended +# that this option be enabled, as your processor(s) may be damaged without it. +#/sbin/modprobe thermal +# +# Memory. This driver adds support for ACPI Memory Hotplug. This driver +# provides support for fielding notifications on ACPI memory devices +# (PNP0C80) which represent memory ranges that may be onlined or offlined +# during runtime. Enabling this driver assumes that your platform hardware +# and firmware have support for hot-plugging physical memory. If your +# system does not support physically adding or ripping out memory DIMMs at +# some platform defined granularity (individually or as a bank) at runtime, +# then you need not enable this driver. +#/sbin/modprobe memory +# +# Container (EXPERIMENTAL -- allows _physical_ insertion and removal of CPUs +# and memory on machines that support it): +#/sbin/modprobe container +# +# ASUS/Medion Laptop Extras. This driver provides support for extra features +# of ACPI-compatible ASUS laptops. As some of Medion laptops are made by +# ASUS, it may also support some Medion laptops (such as 9675 for example). +# It makes all the extra buttons generate standard ACPI events that go through +# /proc/acpi/events, and (on some models) adds support for changing the +# display brightness and output, switching the LCD backlight on and off, and, +# most importantly, allows you to blink those fancy LEDs intended for +# reporting mail and wireless status. All settings are changed via +# /proc/acpi/asus directory entries. Owner and group for these entries can be +# set with asus_uid and asus_gid module parameters. +# More information and a userspace daemon for handling the extra buttons: +# http://sourceforge.net/projects/acpi4asus/ +#/sbin/modprobe asus_acpi +# +# ThinkPad ACPI Laptop Extras. This is a driver for the IBM and Lenovo +# ThinkPad laptops. It adds support for Fn-Fx key combinations, Bluetooth +# control, video output switching, ThinkLight control, UltraBay eject and +# more. For more information about this driver see: +# Documentation/thinkpad-acpi.txt and http://ibm-acpi.sf.net/ +#/sbin/modprobe thinkpad_acpi +# +# Toshiba Laptop Extras. This driver adds support for access to certain +# system settings on "legacy free" Toshiba laptops. These laptops can be +# recognized by their lack of a BIOS setup menu and APM support. On these +# machines, all system configuration is handled through the ACPI. This +# driver is required for access to controls not covered by the general ACPI +# drivers, such as LCD brightness and video output. Configuration is +# accessed by reading and writing text files in the /proc tree. Furthermore, +# no power management functions are exposed, as those are handled by the +# general ACPI drivers. +# More information about this driver is available at: +# http://memebeam.org/toys/ToshibaAcpiDriver +#/sbin/modprobe toshiba_acpi +# +# +# See also the ACPI CPU frequency scaling driver in the "CPU frequency +# scaling modules" section below. + +#### APM support ### +# APM is a BIOS specification for saving power using several different +# techniques. This is mostly useful for battery powered laptops. +# If a kernel supports ACPI it will always be built in, not a module. +# APM is considered obsolete on newer hardware -- most things have ACPI. +#/sbin/modprobe apm + +# Enable PC speaker support: +#/sbin/modprobe pcspkr + +### Built-in PC parallel port support ### +# Generic setup example. Attempt to load by default, since it usually +# won't hurt. Some (most?) people may want to comment the line below +# and look into better functioning and performing hardware specific +# options as described later on in this section. +# +/sbin/modprobe -q parport_pc 2> /dev/null +# Hardware specific setup example (PLIP requires an IRQ, and the +# ECP protocol requires a DMA channel) +# This may also give better performance in general. +#/sbin/modprobe parport_pc io=0x378 irq=7 dma=1 + +### PCI parallel/serial card support: +# If your serial/parallel ports are on a PCI card, uncomment the +# line below and comment the section above that loads parport_pc. +#/sbin/modprobe parport_serial + +### Parallel printer support ### +# This should be safe to try to load by default. +/sbin/modprobe -q lp 2> /dev/null + +### Parallel port IP ### +#/sbin/modprobe plip + +### Filesystem Quota support ### +if /bin/grep -q quota /etc/fstab ; then + # /sbin/modprobe quota_v1 + /sbin/modprobe quota_v2 +fi + +### AGP (Accelerated Graphics Port) GART support ### +# This module takes care of programming the GART (part of your motherboard's +# chipset that handles gathering data from memory and passing it to the +# card) and enables faster AGP transfers. The AGP GART module is required +# to use AGP features of your 3D rendering video card. You'll need this to +# with most cards (nVidia's official drivers that include their own GART +# support being a notable exception) to use X11's direct rendering support. +/sbin/modprobe agpgart 2> /dev/null + +### non-IDE CD-ROM drive support ### +# These modules add CD-ROM drive support. Most of these drivers will probe +# for the I/O address and IRQ of the drive automatically if the parameters +# to configure them are omitted. Typically the I/O address will be specified +# in hexadecimal, e.g.: cm206=0x300,11 +# +# ***NONE*** of these drivers are for use with IDE/ATAPI CD-ROM drives. That +# support is already built into every pre-compiled Slackware Linux kernel. +# Also, note that all of the manufacturers listed below stopped making these +# types of wacky-interface drives years ago and all make IDE/ATAPI-interface +# CD-ROM drives now. So, just because your drive says "Mitsumi" on it is not +# reason enough to think you need the special Mitsumi module loaded, etc. If +# you got your drive within the last couple of years it's probably IDE. Try +# tossing a disc in the drive and mounting it on the various IDE interfaces it +# could be using, like /dev/hdc. +# +#/sbin/modprobe aztcd aztcd=<I/O address> +#/sbin/modprobe cdu31a cdu31a_port=<I/O address> cdu31a_irq=<interrupt> +#/sbin/modprobe cm206 cm206=<I/O address>,<IRQ> +#/sbin/modprobe gscd gscd=<I/O address> +#/sbin/modprobe mcdx mcdx=<I/O address>,<IRQ> +#/sbin/modprobe optcd optcd=<I/O address> +# Below, this last number is "1" for SoundBlaster Pro card, or "0" for a clone. +#/sbin/modprobe sbpcd sbpcd=<I/O address>,1 +#/sbin/modprobe sjcd sjcd=<I/O address> +#/sbin/modprobe sonycd535 sonycd535=<I/O address> + +# CD-ROM drives on ISP16, MAD16 or Mozart sound card: +#/sbin/modprobe isp16 isp16_cdrom_base=<port> isp16_cdrom_irq=<irq> isp16_cdrom_dma=<dma> isp16_cdrom_type=<drive_type> +# where the values are one of: port=0x340,0x320,0x330,0x360 +# irq=0,3,5,7,9,10,11 +# dma=0,3,5,6,7 +# drive_type=noisp16,Sanyo,Panasonic,Sony,Mitsumi + +### Cyclades multiport serial card support ### +#/sbin/modprobe cyclades + +#### Serial line IP support (SLIP/CSLIP/PPP) ### +## This module is for SLIP/CSLIP support: +#/sbin/modprobe slip + +## Load PPP: +# This module is for PPP support: +#/sbin/modprobe ppp_generic +# This PPP plugin supports PPP over serial lines: +#/sbin/modprobe ppp_async +# Use this plugin instead for HDLC (used for high-speed leased lines like T1/E1) +#/sbin/modprobe ppp_synctty + +## This module provides compression for PPP (optional): +##/sbin/modprobe ppp_deflate + +### USB Host Controllers: +# Enhanced Host Controller Interface (USB 2.0) +#/sbin/modprobe ehci-hcd +# Open Host Controller Interface (Compaq/Microsoft/National standard): +#/sbin/modprobe ohci-hcd +# Universal Host Controller Interface (Intel/Via standard): +#/sbin/modprobe uhci-hcd +# ISP1160/ISP1161 USB Host Controllers +#/sbin/modprobe isp116x-hcd +# SL811HS USB Host Controller +#/sbin/modprobe sl811-hcd +# SL811HS PCMCIA/CF USB Host Controller +#/sbin/modprobe sl811_cs + +### USB device support: +# (Note that once you've loaded USB hub support most USB devices will +# trigger the kernel to load their modules automatically) +# USB "Human Interface Device" driver; handles most USB mice, joysticks, +# gamepads, steering wheels, keyboards, trackballs and digitizers. +#/sbin/modprobe usbhid +# Simple HIDBP USB mouse driver, if hid doesn't work: +#/sbin/modprobe usbmouse +# Simple HIDBP USB keyboard driver, if hid doesn't work: +#/sbin/modprobe usbkbd +# Wacom Graphire and Intuos tablet driver: +#/sbin/modprobe wacom +# Logitech WingMan Force joystick: +#/sbin/modprobe iforce +# USB audio: +#/sbin/modprobe audio +# USB modem support: +#/sbin/modprobe cdc-acm +# USB serial converter: +#/sbin/modprobe usbserial +# USB printer support: +#/sbin/modprobe usblp +# IBM "C-It" USB video camera: +#/sbin/modprobe ibmcam framerate=1 +# USB OV511 Camera support: +#/sbin/modprobe ov511 +# USB ADMtek Pegasus-based ethernet device support: +#/sbin/modprobe pegasus +# Kawasaki USB ethernet controller support: +#/sbin/modprobe kaweth +# USB Mustek MDC800 Digital Camera Support: +#/sbin/modprobe mdc800 +# USB Mass Storage support: +#/sbin/modprobe usb-storage +# USS720 parallel-port driver: +#/sbin/modprobe uss720 +# Prolific PL-2302 USB-to-USB network device: +#/sbin/modprobe plusb +# USB Diamond Rio500 support: +#/sbin/modprobe rio500 +# D-Link DSB-R100 FM radio support: +#/sbin/modprobe dsbr100 +# USB Bluetooth support: +#/sbin/modprobe bluetooth + +### USB event drivers: +# Mouse input: +#/sbin/modprobe mousedev +# Joystick input: +#/sbin/modprobe joydev +# Generic event reporting device: +#/sbin/modprobe evdev + +### ALSA (Advanced Linux Sound Architecture) support: +# Sound Blaster Pro/16 support: +#/sbin/modprobe snd-sb16 port=0x220 irq=5 dma8=3 dma16=5 mpu_port=0x300 +# Sound Blaster Live support: +#/sbin/modprobe snd-emu10k1 +# AD1816(A) sound driver: +#/sbin/modprobe snd-ad1816a port=0x530 irq=5 dma1=1 dma2=3 +# Crystal CS4232 based (PnP) cards: +#/sbin/modprobe snd-cs4232 +# ES1370 (Ensoniq AudioPCI ES1370) support. This is for some Creative +# Labs Sound Blaster PCI64/128 (that use the ES1370 chipset), and +# Ensoniq AudioPCI-97: +#/sbin/modprobe snd-ens1370 +# ES1371 (Ensoniq AudioPCI ES1371/73) support. This is for some Creative +# Labs Sound Blaster PCI64/128 (that use the ES1371/73 chipset), Ectiva +# EV1938, Vibra PCI128, and Ensoniq AudioPCI ES1371/73: +#/sbin/modprobe snd-ens1371 +# ESS Maestro, Maestro2, Maestro2E: +#/sbin/modprobe snd-es1968 +# ESS Maestro3/Allegro: +#/sbin/modprobe snd-maestro3 +# VIA VT82xx Audio Controller +#/sbin/modprobe snd-via82xx +# (For information on configuring other sound cards with Linux, +# see the documentation in /usr/src/linux/Documentation/sound/, +# and /usr/src/linux/Documentation/Configure.help. + +### Joystick support ### +# The core joystick input support module, needed by all of the +# joystick devices below: +#/sbin/modprobe joydev +### Next, you must load a module for your gameport. +# Classic ISA/PnP gameports: +#/sbin/modprobe ns558 +# SoundBlaster Live! gameports: +#/sbin/modprobe emu10k1-gp +# Many soundcards had their gameport support bundled in sound drivers +### Drivers for various joystick devices ### +# Analog joysticks and gamepads: +#/sbin/modprobe analog +# Assassin 3D and MadCatz Panther devices: +#/sbin/modprobe a3d +# Logitech ADI digital joysticks and gamepads: +#/sbin/modprobe adi +# Creative Labs Blaster Cobra gamepad: +#/sbin/modprobe cobra +# Genius Flight2000 Digital joysticks and gamepads: +#/sbin/modprobe gf2k +# Gravis GrIP joysticks and gamepads: +#/sbin/modprobe grip +# InterAct digital joysticks and gamepads: +#/sbin/modprobe interact +# ThrustMaster DirectConnect joysticks and gamepads: +#/sbin/modprobe tmdc +# Microsoft SideWinder digital joysticks and gamepads: +#/sbin/modprobe sidewinder +### Serial port game controller support ### +# Both of these are needed for serial-port game controllers: +#/sbin/modprobe serio +#/sbin/modprobe serport +# Logitech WingMan Warrior joystick: +#/sbin/modprobe warrior +# LogiCad3d Magellan/SpaceMouse 6dof controller: +#/sbin/modprobe magellan +# SpaceTec SpaceOrb/Avenger 6dof controller: +#/sbin/modprobe spaceorb +# SpaceTec SpaceBall 4000 FLX 6dof controller: +#/sbin/modprobe spaceball +# Gravis Stinger gamepad: +#/sbin/modprobe stinger +# I-Force joysticks/wheels: +#/sbin/modprobe iforce +### Parallel port connected controllers ### +# Multisystem, Sega Genesis, Saturn joysticks and gamepads: +#/sbin/modprobe db9 +# Multisystem, NES, SNES, N64, PSX joysticks and gamepads: +#/sbin/modprobe gamecon +# Multisystem joysticks via TurboGraFX device: +#/sbin/modprobe turbografx + +### Appletalk support ### +# This is needed if you want to run netatalk, a package which allows +# you to use you Linux box as a file and print server for Apple Macintosh +# computers on your local network. +#/sbin/modprobe appletalk + +### IPX networking support ### +#/sbin/modprobe ipx + +### IDE device support ### +# IDE CD-ROM drives: +#/sbin/modprobe ide-cd +# IDE hard drives: +#/sbin/modprobe ide-disk +# IDE floppy drives: +#/sbin/modprobe ide-floppy +# IDE tape drives: +#/sbin/modprobe ide-tape + +### Network device support ### +# Most of these drivers will probe automatically for the card if you don't +# specify an I/O address and IRQ. +# +# First, if setup probing found a network card, there may be an 'rc.netdevice' +# file that we should run to load the network module: +if [ -x /etc/rc.d/rc.netdevice ]; then + . /etc/rc.d/rc.netdevice +fi + +### Ethernet cards based on the 8390 chip. +# 3com 3c503 support: +#/sbin/modprobe 3c503 +# Ansel Communications EISA 3200 support: +#/sbin/modprobe ac3200 +# Cabletron E21xx support: +#/sbin/modprobe e2100 +# HP PCLAN+ (27247B and 27252A) support: +#/sbin/modprobe hp-plus +# HP PCLAN (27245 and other 27xxx series) support: +#/sbin/modprobe hp +# NE2000/NE1000 support (non PCI): +#/sbin/modprobe ne io=0x300 # NE2000 at 0x300 +#/sbin/modprobe ne io=0x280 # NE2000 at 0x280 +#/sbin/modprobe ne io=0x320 # NE2000 at 0x320 +#/sbin/modprobe ne io=0x340 # NE2000 at 0x340 +#/sbin/modprobe ne io=0x360 # NE2000 at 0x360 +# PCI NE2000 clone support: +#/sbin/modprobe ne2k-pci +# SMC Ultra support: +#/sbin/modprobe smc-ultra +# SMC Ultra32 EISA support: +#/sbin/modprobe smc-ultra32 +# Western Digital WD80*3 (and clones) support: +#/sbin/modprobe wd +# +# Other network hardware drivers: +# +# 3com 3c501 (consider buying a new card, since the 3c501 is slow, +# broken, and obsolete): +#/sbin/modprobe 3c501 +# 3com 3c503: +#/sbin/modprobe 3c503 +# 3com 3c505: +#/sbin/modprobe 3c505 +# 3com 3c507: +#/sbin/modprobe 3c507 +# 3com 3c509 and 3c579: +#/sbin/modprobe 3c509 +# 3com 3c515: +#/sbin/modprobe 3c515 +# This one works for all 3com 3c590/3c592/3c595/3c597 and the +# EtherLink XL 3c900 and 3c905 cards: +#/sbin/modprobe 3c59x +# Apricot Xen-II on board Ethernet: +#/sbin/modprobe apricot +# Generic ARCnet support: +#/sbin/modprobe arcnet +# AT1700/1720 & Fujitsu FMV-181/182/183/184 support: +#/sbin/modprobe at1700 +# AT-LAN-TEC/RealTek pocket adapter support: +#/sbin/modprobe atp +# BPQ Ethernet driver: +#/sbin/modprobe bpqether +# Generic DECchip & DIGITAL EtherWORKS PCI/EISA: +#/sbin/modprobe de4x5 +# D-Link DE600 pocket adapter support: +#/sbin/modprobe de600 +# D-Link DE620 pocket adapter support: +#/sbin/modprobe de620 +# DEPCA support: +#/sbin/modprobe depca +# Digi International RightSwitch cards: +#/sbin/modprobe dgrs +# Intel EtherExpress Pro support: +#/sbin/modprobe eepro +# Intel EtherExpress PRO/100 PCI support: +#/sbin/modprobe eepro100 +# Intel EtherExpress16 support: +#/sbin/modprobe eexpress +# SMC EtherPower II 9432 PCI support: +#/sbin/modprobe epic100 +# ICL EtherTeam 16i/32 support: +#/sbin/modprobe eth16i +# DEC EtherWorks 3 support: +#/sbin/modprobe ewrk3 +# HP 10/100VG PCLAN (ISA, EISA, PCI) support: +#/sbin/modprobe hp100 +# IBM Tropic chipset based adapter support: +#/sbin/modprobe ibmtr +# AMD LANCE and PCnet (AT1500 and NE2100) support: +#/sbin/modprobe lance +# National Semiconductor DP8381x series PCI Ethernet support: +#/sbin/modprobe natsemi +# NI5210 support: +#/sbin/modprobe ni52 +# NI6510 support: +#/sbin/modprobe ni65 +# AMD PCnet32 (VLB and PCI) support: +#/sbin/modprobe pcnet32 +# Red Creek Hardware Virtual Private Network (VPN) support: +#/sbin/modprobe rcpci +# RealTek 8129/8139 (not 8019/8029!) support: +#/sbin/modprobe 8139too +# RealTek 8139C+ enhanced support: +#/sbin/modprobe 8139cp +# Sangoma S502A FRAD support: +#/sbin/modprobe sdla +# SMC 9194 support: +#/sbin/modprobe smc9194 +# TI ThunderLAN support: +#/sbin/modprobe tlan +# DECchip Tulip (dc21x4x) PCI support: +#/sbin/modprobe tulip +# VIA Rhine support: +#/sbin/modprobe via-rhine +# AT&T WaveLAN & DEC RoamAbout DS support: +#/sbin/modprobe wavelan +# Packet Engines Yellowfin Gigabit-NIC support: +#/sbin/modprobe yellowfin +# Davicom DM9xxx (9102/9132/9100/9802...) +#/sbin/modprobe dmfe +# SiS 900/7016 PCI Fast Ethernet +#/sbin/modprobe sis900 + +### Serial line load balancing support ### +#/sbin/modprobe eql + +### "dummy" IP support ### +# A dummy IP driver. Essentially a loopback device. Can be useful -- +# see the Network Administrator's Guide from sunsite.unc.edu:/pub/Linux/docs/LDP +#/sbin/modprobe dummy + +### ISDN kernel support ### +#/sbin/modprobe isdn +# ISDN loop (provides a virtual ISDN card for testing): +#/sbin/modprobe isdnloop + +### ISDN interface support ### +# AVM-B1 with CAPI2.0 driver (requires additional firmware; see +# /usr/src/linux/Documentation/isdn/README.avmb1): +#/sbin/modprobe capidrv +# HiSax SiemensChipSet driver (supports AVM A1, Elsa ISDN cards, +# Teles S0-16.0, Teles S0-16.3, Teles S0-8, Teles/Creatix PnP, +# ITK micro ix1 and many compatibles): +#/sbin/modprobe hisax +# IBM Active 2000 ISDN card support (requires additional firmware; see +# /usr/src/linux/Documentation/isdn/README.act2000 for more information) +#/sbin/modprobe act2000 +# ICN active ISDN card driver: +#/sbin/modprobe icn +# PCBIT-D driver (requires additional firmware; see +# /usr/src/linux/Documentation/isdn/README.pcbit for more information) +#/sbin/modprobe pcbit +# Spellcaster BRI ISDN driver: +#/sbin/modprobe sc + +### Binary format support ### +#/sbin/modprobe binfmt_aout +#/sbin/modprobe binfmt_elf +#/sbin/modprobe binfmt_java +#/sbin/modprobe binfmt_misc + +### Filesystem support ### +#/sbin/modprobe adfs +#/sbin/modprobe affs +#/sbin/modprobe autofs4 +#/sbin/modprobe coda +#/sbin/modprobe cramfs +#/sbin/modprobe exportfs +#/sbin/modprobe ext2 +#/sbin/modprobe ext3 +#/sbin/modprobe fat +#/sbin/modprobe fuse +#/sbin/modprobe hfs +#/sbin/modprobe hfsplus +#/sbin/modprobe hpfs +#/sbin/modprobe intermezzo +#/sbin/modprobe isofs +#/sbin/modprobe jfs +#/sbin/modprobe minix +#/sbin/modprobe msdos +#/sbin/modprobe ncpfs +#/sbin/modprobe nfs +#/sbin/modprobe ntfs +#/sbin/modprobe ocfs2 +#/sbin/modprobe qnx4 +#/sbin/modprobe reiserfs +#/sbin/modprobe relayfs +#/sbin/modprobe romfs +#/sbin/modprobe smbfs +#/sbin/modprobe sysfs +#/sbin/modprobe sysv +#/sbin/modprobe tmpfs +#/sbin/modprobe udf +#/sbin/modprobe ufs +#/sbin/modprobe umsdos +#/sbin/modprobe usbfs +#/sbin/modprobe vfat +#/sbin/modprobe xfs + +### RAID (Multiple Devices) support ### +#/sbin/modprobe linear +#/sbin/modprobe raid0 +#/sbin/modprobe raid1 +#/sbin/modprobe raid5 + +# Note: this *IS NOT* needed to burn discs with 2.6.x or newer kernels. +# +# SCSI emulation support. This will provide SCSI host adapter emulation +# for IDE ATAPI devices, and will allow you to use a SCSI device driver +# instead of a native ATAPI driver. This is useful if you have an ATAPI +# device for which no native driver has been written (for example, an ATAPI +# PD-CD, CD-RW, or DVD-RW drive); you can then use this emulation together +# with an # appropriate SCSI device driver. Note that this option does not +# allow you to attach SCSI devices to a box that doesn't have a SCSI host +# adapter installed. :-) Also, you'll need to tell the ide-scsi module +# which device is your burner so that the normal ATAPI driver won't grab it +# first. This is done by passing a flag to the kernel at boot time. +# If you're using LILO, add this: append="hdc=ide-scsi" +# Replace "hdc" with the appropriate device name. +# +#/sbin/modprobe ide-scsi + +### SCSI kernel support: +#/sbin/modprobe scsi_mod +#/sbin/modprobe scsi_syms +#/sbin/modprobe sd_mod +#/sbin/modprobe sg +#/sbin/modprobe sr_mod +#/sbin/modprobe st + +### SCSI controller support: +# NCR53c7xx SCSI support: +#/sbin/modprobe 53c7xx +# BusLogic MultiMaster and FlashPoint SCSI support: +#/sbin/modprobe BusLogic +# NCR53c406a SCSI support: +#/sbin/modprobe NCR53c406a +# Initio INI-A100U2W SCSI support: +#/sbin/modprobe a100u2w +# AdvanSys SCSI support: +#/sbin/modprobe advansys +# Adaptec AHA152X/2825 support: +#/sbin/modprobe aha152x +# Adaptec AHA1542 support: +#/sbin/modprobe aha1542 +# Adaptec AHA1740 support: +#/sbin/modprobe aha1740 +# This is support for the various aic7xxx based Adaptec SCSI +# controllers. These include the 274x EISA cards; 284x VLB cards; +# 2902, 2910, 293x, 294x, 394x, 3985 and several other PCI and +# motherboard based SCSI controllers from Adaptec: +#/sbin/modprobe aic7xxx +# ACARD 870U/W SCSI support: +#/sbin/modprobe atp870u +# DTC 3180/3280 SCSI support: +#/sbin/modprobe dtc +# EATA ISA/EISA/PCI (DPT and generic EATA/DMA-compliant boards) support: +#/sbin/modprobe eata +# EATA-PIO (old DPT PM2001, PM2012A) support: +#/sbin/modprobe eata_pio +# Future Domain 16xx SCSI/AHA-2920A support: +#/sbin/modprobe fdomain +# Generic NCR5380/53c400 SCSI support: +#/sbin/modprobe g_NCR5380 +# GDT SCSI Disk Array Controller support: +#/sbin/modprobe gdth +# IOMEGA parallel port (imm - newer drives like ZipPlus): +#/sbin/modprobe imm +# Always IN2000 SCSI support: +#/sbin/modprobe in2000 +# Initio 91XXU(W) SCSI support: +#/sbin/modprobe initio +# LSI Logic MegaRAID support (new driver): +#/sbin/modprobe megaraid_mbox +# LSI Logic MegaRAID support (legacy driver): +#/sbin/modprobe megaraid +# NCR53C8XX SCSI support: +#/sbin/modprobe sym53c8xx +# PAS16 SCSI support: +#/sbin/modprobe pas16 +# IOMEGA parallel port (ppa - older parallel Zip drives): +#/sbin/modprobe ppa +# PSI240i support: +#/sbin/modprobe psi240i +# Qlogic FastSCSI! cards: +#/sbin/modprobe qlogicfas +# QLogic ISP2100 SCSI support: +#/sbin/modprobe qlogicfc +# Seagate ST-02 and Future Domain TMC-8xx SCSI support: +#/sbin/modprobe seagate +# Symbios Logic sym53c416 support: +#/sbin/modprobe sym53c416 +# Trantor T128/T128F/T228 SCSI support: +#/sbin/modprobe t128 +# Tekram DC390(T) and Am53/79C974 (PCscsi) SCSI support: +#/sbin/modprobe tmscsim +# UltraStor 14F and 34F support (also see driver below): +#/sbin/modprobe u14-34f +# UltraStor 14F, 24F, and 34F support: +#/sbin/modprobe ultrastor +# Western Digital 7000 SCSI support: +#/sbin/modprobe wd7000 + +### Floppy drive support: +# (Most Linux kernels should already contain this) +#/sbin/modprobe floppy + +### Floppy tape support (such as Colorado Jumbo 250 or other QIC-80 drives): +#/sbin/modprobe ftape + +### IP masquerading modules: +# These modules are used with IP masquerading, a process which allows you to +# use a Linux box connected to the Internet (via PPP or SLIP, or some other +# means) as a gateway for other Linux, Windows, Macintosh boxes on your local +# network that don't have real IP addresses on the Internet. The packets +# going through the Linux machine are "masqueraded", or made to look as if +# they're all coming from the one real IP address on the Internet. +# +# As a quick example (for a much more extensive treatment, see the IP-Masquerade +# mini-HOWTO) to allow Internet access to a local network 192.168.11.0 with a +# netmask of 255.255.255.0, you'd use these commands in /etc/rc.d/rc.local: +# +# # EXTERNAL -> external network interface +# # INTERNAL -> internal network interface +# EXTERNAL=eth0 +# INTERNAL=eth1 +# echo 1 > /proc/sys/net/ipv4/ip_forward +# echo "Setting up NAT (Network Address Translation)..." +# # by default, nothing is forwarded. +# iptables -P FORWARD DROP +# # Allow all connections OUT and only related ones IN +# iptables -A FORWARD -i $EXTERNAL -o $INTERNAL -m conntrack --ctstate ESTABLISHED,RELATED -j ACCEPT +# iptables -A FORWARD -i $INTERNAL -o $EXTERNAL -j ACCEPT +# # enable MASQUERADING +# iptables -t nat -A POSTROUTING -o $EXTERNAL -j MASQUERADE +# +# Then you'd have to set the other boxes on your local network to use the +# Linux machine as their TCP/IP gateway. You'll probably also need to plug +# in the IP address for your Internet service provider in each machine's DNS +# setup. +# +# Now, on to the IP masquerading modules. The example above is good enough +# for most things that use TCP in a relatively simple fashion. It'll work +# for telnet and http, for instance. But, the system breaks down when you +# get protocols that use ports in more complicated ways. Luckily the Linux +# kernel gurus have thought of this and have prepared some modules that +# support masquerading of trickier protocols. The ipchains command is mighty +# flexible as well, and a lot of things can be made to work just by setting +# that up correctly. +# +# Special modules for iptables. See also "man iptables" for information about +# that powerful firewall tool. +# +#/sbin/modprobe ipt_conntrack +#/sbin/modprobe ip_conntrack +#/sbin/modprobe ip_conntrack_ftp +#/sbin/modprobe ip_conntrack_irc +#/sbin/modprobe ip_nat_ftp +#/sbin/modprobe ip_nat_irc +#/sbin/modprobe ip_nat_snmp_basic + +### CPU frequency scaling support +# +# Below, set CPUFREQ to enable CPU frequency scaling to save system power. +# +# To always try to use CPU frequency scaling, set to: on +# To never use CPU frequency scaling, set to: off +# To use it only when the battery module is loaded (this will cause it to +# be used by default with most laptops), set to: battery +# +CPUFREQ=battery + +# If CPUFREQ=battery and the battery module is loaded, turn on CPUfreq. +if [ "$CPUFREQ" = "battery" ]; then + if /sbin/lsmod | grep -wq battery ; then + # CPUFREQ=battery and a battery was detected, so change CPUFREQ + # to 'on' so that the block of script below will try to enable it. + CPUFREQ=on + fi +fi + +### Enable CPU frequency scaling if requested: +if [ "$CPUFREQ" = "on" ]; then + ### CPU frequency scaling modules for the Linux kernel CPUfreq subsystem. + # + # Clock scaling allows you to change the clock speed of the CPUs on the fly. + # This is a nice method to save battery power, because the lower the clock + # speed is, the less power the CPU consumes. + # + # It should not hurt anything to try to load these modules. + # + # generic ACPI P-States based driver: + /sbin/modprobe acpi-cpufreq 2>/dev/null + # AMD mobile K6-2/3+ PowerNow!: + /sbin/modprobe powernow-k6 2>/dev/null + # AMD mobile Athlon PowerNow!: + /sbin/modprobe powernow-k7 2>/dev/null + # AMD Cool&Quiet PowerNow!: + /sbin/modprobe powernow-k8 2>/dev/null + # Intel SpeedStep using the SMI BIOS interface: + /sbin/modprobe speedstep-smi 2>/dev/null + # Intel SpeedStep on ICH-based chipsets: + /sbin/modprobe speedstep-ich 2>/dev/null + # Intel Enhanced SpeedStep : + /sbin/modprobe speedstep-centrino 2>/dev/null + # Intel Pentium4/Xeon clock modulation is not enabled by default. + # The kernel documentation says "This adds the CPUFreq driver for Intel + # Pentium 4 / XEON processors. When enabled it will lower CPU temperature + # by skipping clocks. This driver should be only used in exceptional + # circumstances when very low power is needed because it causes severe + # slowdowns and noticeable latencies. Normally Speedstep should be used + # instead." + # If you still want to try the Pentium4/Xeon module, uncomment the next line: + #/sbin/modprobe p4-clockmod 2>/dev/null + # NatSemi Geode GX / Cyrix MediaGXm: + /sbin/modprobe gx-suspmod 2>/dev/null + # Transmeta Crusoe / Efficeon LongRun: + /sbin/modprobe longrun 2>/dev/null + # VIA Cyrix Longhaul: + /sbin/modprobe longhaul 2>/dev/null + # nForce2 FSB changing cpufreq driver: + /sbin/modprobe cpufreq-nforce2 2>/dev/null + # Enhanced PowerSaver driver for VIA C7 CPUs: + /sbin/modprobe e_powersaver 2>/dev/null + + ### CPU frequency scaling policies: + # + # Use the CPUFreq governor 'powersave' as default. This sets the + # frequency statically to the lowest frequency supported by the CPU. + #/sbin/modprobe cpufreq_powersave + # + # Use the CPUFreq governor 'performance' as default. This sets the + # frequency statically to the highest frequency supported by the CPU. + #/sbin/modprobe cpufreq_performance + # + # Use the CPUFreq governor 'conservative' as default. This allows you + # to get a full dynamic frequency capable system by simply loading your + # cpufreq low-level hardware driver. Be aware that not all cpufreq + # drivers support the 'conservative' governor -- the fallback governor + # will be the 'performance' governor. + #/sbin/modprobe cpufreq_conservative + # + # Use the CPUFreq governor 'ondemand' as default. This allows you to + # get a full dynamic frequency capable system by simply loading your + # cpufreq low-level hardware driver. Be aware that not all cpufreq + # drivers support the 'ondemand' governor -- the fallback governor will + # be the performance governor. This seems to be the most-recommended + # scaling policy, so rc.modules will try to load this by default. + /sbin/modprobe cpufreq_ondemand 2>/dev/null + + ### CPU scaling governor: + # + # Set the default scaling_governor to be used (such as userspace or ondemand) + # if there is a CPUFreq scaling policy module loaded that supports it: + SCALING_GOVERNOR=ondemand + # + # Try to enable the scaling_governor selected above: + if [ -r /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_governors ]; then + if grep -wq "$SCALING_GOVERNOR" /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_governors ; then + if [ -r /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor ]; then + for SYSCPUFILE in /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor ; do + echo "$SCALING_GOVERNOR" > $SYSCPUFILE + done + fi + fi + fi + +fi # End enabling CPU scaling support + +# We are done with these variables now: +unset NEWMODS RELEASE CPUFREQ SCALING_GOVERNOR SYSCPUFILE + diff --git a/source/k/packaging-x86/kernel-modules/slack-desc b/source/k/packaging-x86/kernel-modules/slack-desc new file mode 100644 index 00000000..fea61c79 --- /dev/null +++ b/source/k/packaging-x86/kernel-modules/slack-desc @@ -0,0 +1,19 @@ +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':'. + + |-----handy-ruler------------------------------------------------------| +kernel-modules: kernel-modules (single CPU Linux kernel modules) +kernel-modules: +kernel-modules: A kernel module is a piece of object code that can be dynamically +kernel-modules: loaded into the Linux kernel to provide new kernel functions. Most of +kernel-modules: these modules provide support for devices such as CD-ROM drives, tape +kernel-modules: drives, and ethernet cards. You can choose which modules to load by +kernel-modules: editing /etc/rc.d/rc.modules. +kernel-modules: +kernel-modules: +kernel-modules: +kernel-modules: |