diff options
Diffstat (limited to 'source/kde/KDE.SlackBuild')
| -rwxr-xr-x | source/kde/KDE.SlackBuild | 458 |
1 files changed, 432 insertions, 26 deletions
diff --git a/source/kde/KDE.SlackBuild b/source/kde/KDE.SlackBuild index 048c09e9..7d40f165 100755 --- a/source/kde/KDE.SlackBuild +++ b/source/kde/KDE.SlackBuild @@ -1,40 +1,435 @@ #!/bin/sh +# Copyright 2011, 2012 Patrick J. Volkerding, Sebeka, MN, USA +# All rights reserved. +# +# Redistribution and use of this script, with or without modification, is +# permitted provided that the following conditions are met: +# +# 1. Redistributions of this script must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# +# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO +# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -# Build (and install) all KDE core packages. -# Written for Slackware by volkerdi@slackware.com. -# Modified for KDE4 by Robby Workman <rworkman@slackware.com> -# Modified for KDE4 by Eric Hameleers <alien@slackware.com> +# Adapted by Eric Hameleers <alien@slackware.com> from the modular x.org build. -# kdeaccessibility builds plugins for epos, festival, flite, freetts, and -# hadifix, so they should work with kde if any of those are installed later +# To build only a single package group, specify it as $1, like: +# ./KDE.SlackBuild kdeedu +# To build only a single package, specify both the group name +# and the name of the package, like: +# ./KDE.SlackBuild kdeedu:marble +# ./KDE.SlackBuild kdebindings:perlqt,perlkde -# Set the config option variables if they are not already set: + +CLEANUP=${CLEANUP:-"yes"} # clean up build directory after successful build. +PRECHECK=${PRECHECK:-"no"} # don't let the script check the available sources. +CHECKOUT=${CHECKOUT:-"no"} # don't let the script checkout missing sources. + +KDEGITURI="git://anongit.kde.org" + +pkgbase() { + PKGEXT=$(echo $1 | rev | cut -f 1 -d . | rev) + case $PKGEXT in + 'gz' ) + PKGRETURN=$(basename $1 .tar.gz) + ;; + 'bz2' ) + PKGRETURN=$(basename $1 .tar.bz2) + ;; + 'lzma' ) + PKGRETURN=$(basename $1 .tar.lzma) + ;; + 'xz' ) + PKGRETURN=$(basename $1 .tar.xz) + ;; + *) + PKGRETURN=$(basename $1) + ;; + esac + echo $PKGRETURN +} + +# Set initial variables: +CWD=$(pwd) +TMP=${TMP:-/tmp} + +# Set up a few useful functions: + +fix_perms() { + target_dir=$1 + [ -z "$target_dir" ] && target_dir='.' + + chown -R root:root $target_dir + find $target_dir \ + \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ + -exec chmod 755 {} \; -o \ + \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ + -exec chmod 644 {} \; +} + +strip_binaries() { + target_dir=$1 + [ -z "$target_dir" ] && target_dir='.' + + find $target_dir | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null + find $target_dir | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null + find $target_dir | xargs file | grep "current ar archive" | grep ELF | cut -f 1 -d : | xargs strip -g 2> /dev/null +} + +process_man_pages() { + # Compress and if needed symlink the man pages: + if [ -d usr/man ]; then + ( cd usr/man + for manpagedir in $(find . -type d -name "man*") ; do + ( cd $manpagedir + for eachpage in $( find . -type l -maxdepth 1) ; do + ln -s $( readlink $eachpage ).gz $eachpage.gz + rm $eachpage + done + gzip -9 *.* + ) + done + ) + fi +} + +process_info_pages() { + # Compress info pages and purge "dir" file from the package: + if [ -d usr/info ]; then + ( cd usr/info + rm -f dir + gzip -9 * + ) + fi +} + +no_usr_share_doc() { + # If there are docs, move them: + if [ -d usr/share/doc ]; then + mkdir -p usr/doc + mv usr/share/doc/* usr/doc + rmdir usr/share/doc + fi +} + +precheck() { + # See if the sources we have match the module components we want to build: + RETVAL=0 + + for SRCFILE in $(find $CWD/src -name "*.tar.?z*") ; do + if cat modules/* |grep "^ *#" |grep -wq $(echo $(basename $SRCFILE) | rev | cut -f2- -d- | rev)$ ; then + echo "Source file '$(basename $SRCFILE)' is commented out in 'modules' !" + elif ! cat modules/* |grep -v "^ *#" |grep -wq $(echo $(basename $SRCFILE) | rev | cut -f2- -d- | rev) ; then + echo "Source file '$(basename $SRCFILE)' is not mentioned in 'modules' !" + RETVAL=1 + fi + done + + for MODULE in $(cat $CWD/modules/* | grep -v "^#") ; do + #if [ -z "$(find $CWD/src -name ${MODULE}-*)" ] ; then + if [ -z "$(find $CWD/src -name $MODULE-*.tar.* |grep -E "$MODULE-[^-]+.tar.*$|$MODULE-[0-9].+.tar.*$")" ] ; then + echo "Module '$MODULE' does not have a matching source tarball !" + if [ "$CHECKOUT" = "yes" -o "$CHECKOUT" = "YES" ]; then + echo "Checking out KDE component at branch '$VERSION'." + git archive --format=tar --prefix {$MODULE}-${VERSION}/ --remote ${KDEGITURI}/${MODULE}.git v${VERSION} | xz -c > $CWD/src/${MODULE}-${VERSION}.tar.xz + RETVAL=$? + if [ $RETVAL -ne 0 ]; then + echo "Error while checking out '$MODULE' !" + mv $CWD/src/${MODULE}-${VERSION}.tar.xz $CWD/src/${MODULE}-${VERSION}.tar.xz.failed + fi + else + RETVAL=1 + fi + fi + # A missing slack-desc counts as fatal even if the program may end up + # inside the big meta-package. + if [ -z "$(find $CWD/slack-desc -name ${MODULE})" ] ; then + echo "Module '$MODULE' does not have a slack-desc file !" + RETVAL=1 + fi + done + + if [ $RETVAL -eq 0 ]; then + echo "Check complete, build starts in 5 seconds" + sleep 5 + else + exit 1 + fi +} + +# Support function builds one complete module (like 'kdelibs'), or +# exactly one package which is part of a module (like 'okular'): +build_mod_pkg () { + kde_module=$1 + kde_pkg=$2 + + cd $CWD/modules + + # See if $kde_module is a module name like "kdeadmin": + if [ ! -z "$kde_module" ]; then + if [ ! -f "$kde_module" ]; then + return + fi + fi + PKG=${SLACK_KDE_BUILD_DIR}/${kde_module}/package-${kde_module} + rm -rf $PKG + mkdir -p $PKG + ( for PKGNAME in $(cat $kde_module |grep -v "^$" |grep -v "^#") ; do + # Find the full source filename - yeah ugly, but I had two goals: + # 1- source tarball can be in a random subdirectory of src/ + # 2- differentiate between e.g. 'kdepim' and 'kdepim-runtime' + kde_src=$(basename $(find $CWD/src -name "$PKGNAME-*.tar.?z*" |grep -E "$PKGNAME-[^-]+.tar.*$|$PKGNAME-[0-9].+.tar.*$") 2>/dev/null) + if [ "x$kde_src" = "x" ]; then + echo "** Did not find '$PKGNAME' in src" + continue + fi + # Reset $PKGARCH to its initial value: + PKGARCH=$ARCH + # Perhaps $PKGARCH should be something different: + if grep -wq "^$PKGNAME" ${CWD}/noarch ; then + PKGARCH=noarch + fi + if grep -wq "^$PKGNAME" ${CWD}/package-blacklist ; then + continue + fi + cd $SLACK_KDE_BUILD_DIR/${kde_module} + # If $kde_pkg is set, we only want to build one package: + if [ ! -z "$kde_pkg" ]; then + if [ "$kde_pkg" = "$PKGNAME" ]; then + # Set $PKG to a private dir for the modular package build: + PKG=$SLACK_KDE_BUILD_DIR/${kde_module}/package-$PKGNAME + rm -rf $PKG + mkdir -p $PKG + else + continue + fi + else + echo + echo "Building from source ${kde_src}" + echo + fi + if grep -wq "^$PKGNAME" ${CWD}/modularize ; then + # Set $PKG to a private dir for the modular package build: + PKG=$SLACK_KDE_BUILD_DIR/${kde_module}/package-$PKGNAME + rm -rf $PKG + mkdir -p $PKG + fi + + # Let's figure out the version number on the modular package: + MODULAR_PACKAGE_VERSION=$(echo $kde_src | rev | cut -f 3- -d . | cut -f 1 -d - | rev) + + rm -rf $(pkgbase $kde_src) + tar xf $(find $CWD/src -name ${kde_src}) || exit 1 + cd $(pkgbase $kde_src) || exit 1 + + fix_perms + + # If any patches are needed, call this script to apply them: + if [ -r $CWD/patch/${PKGNAME}.patch ]; then + . $CWD/patch/${PKGNAME}.patch || exit 1 + fi + + # If there's any pre-install things to do, do them: + if [ -r $CWD/pre-install/${PKGNAME}.pre-install ]; then + . $CWD/pre-install/${PKGNAME}.pre-install + fi + + # Run cmake, using custom cmake script if needed: + if [ -r $CWD/cmake/${PKGNAME} ]; then + . $CWD/cmake/${PKGNAME} + else + # This is the default configure script: + . $CWD/cmake/cmake + fi + + make $NUMJOBS || make || exit 1 + make install DESTDIR=$PKG || exit 1 + + # Back to source toplevel builddir, since cmake may have run in a subdir: + cd $SLACK_KDE_BUILD_DIR/${kde_module}/$(pkgbase $kde_src) + + mkdir -p $PKG/usr/doc/${PKGNAME}-${MODULAR_PACKAGE_VERSION} + # Use specific documentation files if available, else use a default set: + if [ -r $CWD/docs/${PKGNAME} ]; then + cp -a $(cat $CWD/docs/${PKGNAME}) \ + $PKG/usr/doc/${PKGNAME}-${MODULAR_PACKAGE_VERSION} + else + cp -a \ + AUTHORS* CONTRIBUTING* COPYING* HACKING* \ + INSTALL* MAINTAINERS README* NEWS* TODO* \ + $PKG/usr/doc/${PKGNAME}-${MODULAR_PACKAGE_VERSION} + # If there's a ChangeLog, installing at least part of the recent + # history is useful, but don't let it get totally out of control: + if [ -r ChangeLog ]; then + DOCSDIR=$(echo $PKG/usr/doc/${PKGNAME}-$MODULAR_PACKAGE_VERSION) + cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog + touch -r ChangeLog $DOCSDIR/ChangeLog + fi + fi + + # Get rid of zero-length junk files: + find $PKG/usr/doc/${PKGNAME}-$MODULAR_PACKAGE_VERSION -type f -size 0 -exec rm --verbose "{}" \; + rmdir --verbose $PKG/usr/doc/${PKGNAME}-$MODULAR_PACKAGE_VERSION 2> /dev/null + + # Strip binaries: + strip_binaries $PKG + + # If there's any special post-install things to do, do them: + if [ -r $CWD/post-install/${PKGNAME}.post-install ]; then + . $CWD/post-install/${PKGNAME}.post-install + fi + + # If this package requires some doinst.sh material, add it here: + if [ -r $CWD/doinst.sh/${PKGNAME} ]; then + mkdir -p $PKG/install + cat $CWD/doinst.sh/${PKGNAME} \ + | sed -e "s#usr/lib#usr/lib${LIBDIRSUFFIX}#g" \ + >> $PKG/install/doinst.sh + fi + + # If this is a modular package, build it here: + if [ -d $SLACK_KDE_BUILD_DIR/${kde_module}/package-$PKGNAME ]; then + cd $PKG + process_man_pages + process_info_pages + no_usr_share_doc + mkdir -p $PKG/install + if [ -r $CWD/slack-desc/${PKGNAME} ]; then + cat $CWD/slack-desc/${PKGNAME} > $PKG/install/slack-desc + else + touch $PKG/install/slack-desc-missing + fi + if [ -r $CWD/build/${PKGNAME} ]; then + MODBUILD=$(cat $CWD/build/${PKGNAME}) + else + MODBUILD=$BUILD + fi + if [ -r $CWD/makepkg/${PKGNAME} ]; then + BUILD=$MODBUILD . $CWD/makepkg/${PKGNAME} + else + /sbin/makepkg -l y -c n ${SLACK_KDE_BUILD_DIR}/${kde_module}/${PKGNAME}-$(echo $MODULAR_PACKAGE_VERSION |tr - _)-${PKGARCH}-${MODBUILD}.txz + fi + # We will continue with the fresh packages installed: + upgradepkg --install-new --reinstall ${SLACK_KDE_BUILD_DIR}/${kde_module}/${PKGNAME}-${MODULAR_PACKAGE_VERSION}-${PKGARCH}-${MODBUILD}.txz + # Keep MIME database current: + /usr/bin/update-mime-database /usr/share/mime 1>/dev/null 2>/dev/null & + fi + + # Reset $PKG to assume we're building the whole source dir: + PKG=${SLACK_KDE_BUILD_DIR}/${kde_module}/package-${kde_module} + + done + + # Nothing here? Must have been fully modular. :-) + if [ ! -d ${SLACK_KDE_BUILD_DIR}/${kde_module}/package-${kde_module}/usr ]; then + return + fi + + # Build a "<kde_module>" package for anything that wasn't built modular: + # It's safer to consider these to have binaries in them. ;-) + PKGARCH=$ARCH + cd $PKG + + process_man_pages + process_info_pages + no_usr_share_doc + + # If there are post-install things to do for the combined package, + # we do them here. This could be used for things like making a + # VERSION number for a combined package. :-) + if [ -r $CWD/post-install/${kde_module}.post-install ]; then + . $CWD/post-install/${kde_module}.post-install + fi + mkdir -p $PKG/install + if [ -r $CWD/slack-desc/${kde_module} ]; then + cat $CWD/slack-desc/${kde_module} > $PKG/install/slack-desc + else + touch $PKG/install/slack-desc-missing + fi + if [ -r $CWD/doinst.sh/${kde_module} ]; then + cat $CWD/doinst.sh/${kde_module} \ + | sed -e "s#usr/lib#usr/lib${LIBDIRSUFFIX}#g" \ + >> $PKG/install/doinst.sh + fi + if [ -r $CWD/build/${kde_module} ]; then + SRCDIRBUILD=$(cat $CWD/build/${kde_module}) + else + SRCDIRBUILD=$BUILD + fi + if [ -r $CWD/makepkg/${kde_module} ]; then + BUILD=$SRCDIRBUILD . $CWD/makepkg/${kde_module} + else + /sbin/makepkg -l y -c n ${SLACK_KDE_BUILD_DIR}/${kde_module}/${kde_module}-$(echo $VERSION |tr - _)-${PKGARCH}-${SRCDIRBUILD}.txz + fi + # We will continue with the fresh packages installed: + upgradepkg --install-new --reinstall ${SLACK_KDE_BUILD_DIR}/${kde_module}/${kde_module}-${VERSION}-${PKGARCH}-${SRCDIRBUILD}.txz + # Keep MIME database current: + /usr/bin/update-mime-database /usr/share/mime 1>/dev/null 2>/dev/null & + ) +} + +# Process the module queue. Format is: +# module[:subpackage[,subpackage]] [module...] +deterministic_build() { + RET=0 + for ENTRY in $1 ; do + KDE_MOD=$(echo "$ENTRY": | cut -f1 -d:) + KDE_PKGS=$(echo "$ENTRY": | cut -f2 -d:) + if [ -z "$KDE_PKGS" ]; then + build_mod_pkg $KDE_MOD + let RET=$RET+$? + else + for KDE_PKG in $(echo $KDE_PKGS |tr ',' ' ') ; do + build_mod_pkg $KDE_MOD $KDE_PKG + let RET=$RET+$? + done + fi + done + + return $RET +} + +# MAIN PART # + +# Import the build configuration options for as far as they are not already set: [ -r ./KDE.options ] && . ./KDE.options # This avoids compiling a version number into KDE's .la files: QTDIR=/usr/lib${LIBDIRSUFFIX}/qt ; export QTDIR # Get the kde environment variables -[ -d kdebase ] && eval $(sed -e "s#/lib#/lib${LIBDIRSUFFIX}#" ./kdebase/profile.d/kde.sh) +[ -d post-install/kdebase ] && eval $(sed -e "s#/lib#/lib${LIBDIRSUFFIX}#" ./post-install/kdebase/profile.d/kde.sh) -# These, and polkit-qt-1 from git, will be needed soon, but are too new to use here. -# polkit-kde-agent-1 \ -# polkit-kde-kcmodules-1 " +# Where we are going to do all the hard labour: +SLACK_KDE_BUILD_DIR=$TMP/kde-build +mkdir -p $SLACK_KDE_BUILD_DIR +# Yes, we know kde-workspace is built twice. kdebase needs the +# plasma bits from it, and then we build it again for good measure... +# Same goes for kdelibs (at least during KDE 4.8.x) kdeutils:ksecrets needs +# kdelibs and then kdelibs needs a rebuild to pick up ksecretservice +# (this will no longer be required in KDE 4.9). KDEMODS=" \ - polkit-qt-1 \ kdelibs \ kdepimlibs \ kdebase \ - kdebase-workspace \ - kdebase-runtime \ kdesdk \ kdegraphics \ kdebindings \ - kdebase-workspace \ + kdebase:kde-workspace \ kdeaccessibility \ kdeutils \ + kdelibs \ kdemultimedia \ + extragear:libktorrent \ kdenetwork \ oxygen-icons \ kdeadmin \ @@ -46,28 +441,36 @@ KDEMODS=" \ kdeedu \ kdewebdev \ kdeplasma-addons \ - polkit-kde-1 " + polkit-kde \ + extragear \ + " # Allow for specification of individual packages to be built: if [ -z "$1" ]; then MODQUEUE=$KDEMODS else - MODQUEUE=$* + MODQUEUE="$*" fi -# Yes, we know kdebase-workspace is built twice. kdebase needs the -# plasma bits from it, and then we build it again for good measure... +# If requested, check if +# sources, module definitions and slack-desc are complete and matching: +if [ "$PRECHECK" = "yes" -o "$PRECHECK" = "YES" ]; then + precheck +fi + +# And finally, start working! for module in \ $MODQUEUE ; do - cd $module - ./$module.SlackBuild + echo "SlackBuild processing module '$module'" + deterministic_build $module if [ $? = 0 ]; then - # Yes, I will build with the fresh packages installed: - upgradepkg --install-new --reinstall /tmp/${module}-*.txz - # Keep MIME database current: - /usr/bin/update-mime-database /usr/share/mime 1> /dev/null 2> /dev/null & - rm -rf /tmp/package-${module} /tmp/${module}-$VERSION + # Move the created packages up into the KDE build directory: + mv ${SLACK_KDE_BUILD_DIR}/$(echo $module |cut -f1 -d:)/*.t?z ${SLACK_KDE_BUILD_DIR}/ + if [ "$CLEANUP" = "yes" -o "$CLEANUP" = "YES" ]; then + # Clean out package and build directories: + rm -rf ${SLACK_KDE_BUILD_DIR}/$(echo $module |cut -f1 -d:) + fi else echo "${module} failed to build." exit 1 @@ -75,3 +478,6 @@ do cd - ; done +exit 0 + + |