summaryrefslogtreecommitdiff
path: root/source/l/gtk+2/gtk+2.SlackBuild
diff options
context:
space:
mode:
Diffstat (limited to 'source/l/gtk+2/gtk+2.SlackBuild')
-rwxr-xr-xsource/l/gtk+2/gtk+2.SlackBuild183
1 files changed, 183 insertions, 0 deletions
diff --git a/source/l/gtk+2/gtk+2.SlackBuild b/source/l/gtk+2/gtk+2.SlackBuild
new file mode 100755
index 00000000..0c4e043a
--- /dev/null
+++ b/source/l/gtk+2/gtk+2.SlackBuild
@@ -0,0 +1,183 @@
+#!/bin/sh
+
+# Copyright 2008, 2009 Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+VERSION=2.14.7
+ARCH=${ARCH:-x86_64}
+BUILD=${BUILD:-4}
+
+NUMJOBS=${NUMJOBS:-" -j7 "}
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-gtk2
+
+if [ "$ARCH" = "i486" ]; then
+ SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+ LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+ SLKCFLAGS="-O2"
+ LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+ SLKCFLAGS="-O2 -fPIC"
+ LIBDIRSUFFIX="64"
+fi
+
+rm -rf $PKG
+mkdir -p $TMP $PKG/usr
+cd $TMP
+rm -rf gtk+-$VERSION
+tar xvf $CWD/gtk+-$VERSION.tar.bz2 || exit 1
+cd gtk+-$VERSION
+
+# There's been this long standing debate about PNG and -lz
+# and this patch is the workaround. ;-)
+zcat $CWD/gtk.pnglz.diff.gz | patch -p1 --verbose || exit 1
+# Fix Flash in Konquoror:
+zcat $CWD/gtk.nsplugin.diff.gz | patch -p1 --verbose || exit 1
+
+## Fix for x86_64 (does not hurt the other archs but note that we will start
+## using /etc/gtk-2.0/$host instead of /etc/gtk-2.0/ now):
+ sed -i "s/GTK_SYSCONFDIR, \\\"gtk-2\\.0\\\"/GTK_SYSCONFDIR, \\\"gtk-2\\.0\\\", HOST/g" ./gtk/gtkrc.c ./gdk-pixbuf/gdk-pixbuf-io.c
+ sed -i 's/sysconfdir)\\"/& \\\n\t-DHOST=\\\"$(host_triplet)\\\"/g' \
+ gdk-pixbuf/Makefile.am \
+ gtk/Makefile.am \
+ modules/input/Makefile.am
+
+# The original config.{guess,sub} do not work on x86_64
+cp -p /usr/share/libtool/config.{guess,sub} .
+
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+libtoolize --force
+autoreconf -vif
+
+# Autoconf changes linux to linux-gnu.
+# Our host is $ARCH-slackware-linux not $ARCH-slackware-linux-gnu:
+sed -i -e 's#linux|linux-gnu|#linux|linux|#' config.sub
+
+CFLAGS="$SLKCFLAGS" \
+./configure \
+ --prefix=/usr \
+ --libdir=/usr/lib${LIBDIRSUFFIX} \
+ --sysconfdir=/etc \
+ --mandir=/usr/man \
+ --with-xinput=yes \
+ --build=$ARCH-slackware-linux
+
+make $NUMJOBS || make || exit 1
+
+# Check the host value that is passed to the compile to the one in this script:
+host="$ARCH-slackware-linux"
+compile_host=$(grep 'host_triplet =' gtk/Makefile | sed -e "s/.* = //")
+if [ "x$compile_host" != "x$host" ]; then
+ echo "Host mismatch: compile='$compile_host', SlackBuild='$host'" && exit 1
+fi
+
+make install DESTDIR=$PKG \
+ RUN_QUERY_IMMODULES_TEST=false RUN_QUERY_LOADER_TEST=false \
+ || exit 1
+
+# I'm spamming your root partition because /etc/gtk-2.0 won't install to $DESTDIR
+make install || exit 1
+cp -a /etc/gtk-2.0/* $PKG/etc/gtk-2.0/ || exit 1
+rm -rf $PKG/etc/gtk-2.0/$host
+mkdir -p $PKG/etc/gtk-2.0/$host
+mv $PKG/etc/gtk-2.0/* $PKG/etc/gtk-2.0/$host/
+
+mv $PKG/etc/gtk-2.0/$host/im-multipress.conf $PKG/etc/gtk-2.0/$host/im-multipress.conf.new || exit 1
+
+# We need to have separate 32-bit and 64-bit binaries
+# for places where we have two copies of the GTK+ package installed.
+# (we might have x86_64 and i486 packages on the same system, for example.)
+case "$host" in
+ s390x*|x86_64*)
+ mv $PKG/usr/bin/gtk-query-immodules-2.0{,-64}
+ mv $PKG/usr/bin/gdk-pixbuf-query-loaders{,-64}
+ ( cd $PKG/usr/bin
+ ln -sf gtk-query-immodules-2.0-64 gtk-query-immodules-2.0
+ ln -sf gdk-pixbuf-query-loaders-64 gdk-pixbuf-query-loaders
+ )
+ ;;
+ *)
+ mv $PKG/usr/bin/gtk-query-immodules-2.0{,-32}
+ mv $PKG/usr/bin/gdk-pixbuf-query-loaders{,-32}
+ ( cd $PKG/usr/bin
+ ln -sf gtk-query-immodules-2.0-32 gtk-query-immodules-2.0
+ ln -sf gdk-pixbuf-query-loaders-32 gdk-pixbuf-query-loaders
+ )
+ ;;
+esac
+
+# Install wrappers for the binaries:
+cp $CWD/update-gdk-pixbuf-loaders $PKG/usr/bin/update-gdk-pixbuf-loaders
+cp $CWD/update-gtk-immodules $PKG/usr/bin/update-gtk-immodules
+chmod 0755 $PKG/usr/bin/update-*
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
+ | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+
+# Compress and if needed symlink the man pages:
+if [ -d $PKG/usr/man ]; then
+ ( cd $PKG/usr/man
+ for manpagedir in $(find . -type d -name "man*") ; do
+ ( cd $manpagedir
+ for eachpage in $( find . -type l -maxdepth 1) ; do
+ ln -s $( readlink $eachpage ).gz $eachpage.gz
+ rm $eachpage
+ done
+ gzip -9 *.?
+ )
+ done
+ )
+fi
+
+mkdir -p $PKG/usr/doc/gtk+-$VERSION
+cp -a \
+ AUTHORS COPYING NEWS README TODO \
+ $PKG/usr/doc/gtk+-$VERSION
+( cd $PKG/usr/doc/gtk+-$VERSION
+ ln -s /usr/share/gtk-doc/html/gail-libgail-util .
+ ln -s /usr/share/gtk-doc/html/gdk .
+ ln -s /usr/share/gtk-doc/html/gdk-pixbuf .
+ ln -s /usr/share/gtk-doc/html/gtk .
+)
+
+# I'm almost inclined to think this stuff is obsolete but I don't know for sure.
+# I do know that leaving it in doesn't hurt (aside from a few wasted bytes, but
+# probably less than the comments here waste ;-)
+mkdir -p $PKG/etc/profile.d
+cp -a $CWD/profile.d/* $PKG/etc/profile.d
+chmod 755 $PKG/etc/profile.d/*
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/gtk+2-$VERSION-$ARCH-$BUILD.txz
+