diff options
Diffstat (limited to 'source/l/ncurses/terminfo/xterm.terminfo')
| -rw-r--r-- | source/l/ncurses/terminfo/xterm.terminfo | 2460 |
1 files changed, 2460 insertions, 0 deletions
diff --git a/source/l/ncurses/terminfo/xterm.terminfo b/source/l/ncurses/terminfo/xterm.terminfo new file mode 100644 index 00000000..7ff85bfb --- /dev/null +++ b/source/l/ncurses/terminfo/xterm.terminfo @@ -0,0 +1,2460 @@ +# $XTermId: terminfo,v 1.177 2017/12/25 21:08:55 tom Exp $ +# +# Updates/notes/new entries (e.g., xterm-8bit, xterm-16color, xterm-256color) +# - Thomas E. Dickey +# +#------------------------------------------------------------------------------ +# Copyright 1996-2016,2017 by Thomas E. Dickey +# +# All Rights Reserved +# +# Permission is hereby granted, free of charge, to any person obtaining a +# copy of this software and associated documentation files (the +# "Software"), to deal in the Software without restriction, including +# without limitation the rights to use, copy, modify, merge, publish, +# distribute, sublicense, and/or sell copies of the Software, and to +# permit persons to whom the Software is furnished to do so, subject to +# the following conditions: +# +# The above copyright notice and this permission notice shall be included +# in all copies or substantial portions of the Software. +# +# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS +# OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF +# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. +# IN NO EVENT SHALL THE ABOVE LISTED COPYRIGHT HOLDER(S) BE LIABLE FOR ANY +# CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, +# TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE +# SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. +# +# Except as contained in this notice, the name(s) of the above copyright +# holders shall not be used in advertising or otherwise to promote the +# sale, use or other dealings in this Software without prior written +# authorization. +#------------------------------------------------------------------------------ +# format (ncurses 6.1): tic -W -1 -f -x terminfo +#------------------------------------------------------------------------------ +# +# Special Capabilities: +# -------------------- +# ich has a corresponding capability that inserts a single blank. We could +# have used ich1=\E[@, which works with ncurses, but that is not standard +# behavior. If it is set, then SVr4 vi (e.g., Solaris 2.6) emits both +# smir/rmir and ich1. +# meml locks memory above the cursor; memu unlocks (ala HP terminals). This +# is not recognized by some older (e.g., SVr3) tic programs, but none +# do more than warn about it. Ignore the warning. +# smcup clears memory before switching to the alternate screen. The older +# (deprecated) \E[?47h did not do this, requiring applications to +# embed a \E[2J in the rmcup string. However, that behavior cannot +# be disabled via titeInhibit, making that resource not function as +# intended on systems with terminfo. +# rs2/is2 are shorter with XFree86 xterm because it supports DECSTR. We +# use the shorter sequence for compatibility with the termcap, which +# is trimmed to keep it shorter than 1023 characters. It (escape \E[!p) +# replaces these in the conventional vt100 reset-string: +# \E7 - save cursor (fixes origin-mode side-effect) +# \E[r - reset scrolling margins +# \E[m - reset SGR (including color) +# \E[?7h - reset wraparound mode (DECAWM) +# \E[?1l - reset application cursor keys (DECCKM) +# \E[?6l - reset origin mode (DECOM) +# \E8 - restore cursor +# DECSTR is recognized by XFree86 xterm even in vt52 mode. +# +# Editing Keypad: +# -------------- +# XFree86 xterm emulates vt220 if the decTerminalID resource is set to 200 or +# higher. Otherwise it emulates a vt100 or vt52 depending on the value of the +# resource. When emulating a vt220, we support the editing keypad. Sun and PC +# keyboards have an editing keypad which is similar to the vt220: +# +# VT220 editing keypad +# ---------------------------- +# Find Insert Remove +# Select Prev Next +# ---------------------------- +# +# Sun/PC editing keypad +# ---------------------------- +# Insert Home PageUp +# Delete End PageDn +# ---------------------------- +# +# If the sunKeyboard resource is true, we map it this way (adjusting the values +# of Home, End and Delete): +# VT220 Sun/PC +# ---------------------------- +# Find Home +# Select End +# Insert Insert +# Remove Delete +# Prev PageUp +# Next PageDn +# ---------------------------- +# +# Note that all of the keys on the editing keypad transmit escape sequences. A +# vt220 does this only when in vt220 mode; when emulating a vt100 the editing +# keypad is inactive. +# +# Alternative keycodes: +# -------------------- +# Several of the function keys have alternative names, depending on the type of +# host which your xterm is connected to. DEC (i.e., the VMS system) uses F15 +# as the HELP key, F16 as the DO key. Unix applications generally do not do +# this. Curses applications in particular, assign a unique keycode to each +# capability string. These terminal descriptions do not have conflicting +# definitions, to ensure that Unix curses applications use a consistent set of +# keycodes. To get a VMS-bias, make these substitutions: +# 1. change khome to kfnd +# 2. change kend to kslt +# The original xterm-r6 entry does in fact have a VMS bias. +# +# Some legacy applications using the termcap emulation may expect kll where +# we have specified kend. +# +# Function keys with modifiers (Sun/PC): +# ------------------------------------- +# Shift-Fx - kf{12+x} +# Control-Fx - kf{24+x} +# Shift-Control-Fx - kf{36+x} +# +# The terminfo defines some special keys which are documented as "shifted", +# e.g., kDC is shifted-delete-character. +# +# Note however, that even though the terminfo says a key might be sent, there +# may be conflicts which prevent this. For example, it is common to use +# shifted pageup and pagedown for window manager functions. The default +# translation for xterm since X11R4 has overridden shifted Insert, Select, +# PageUp and PageDown, which correspond to terminfo kIC, kEND, kPRV and kNXT +# respectively. +# +xterm-new|modern xterm terminal emulator, + npc, + indn=\E[%p1%dS, + kb2=\EOE, + kcbt=\E[Z, + kent=\EOM, + rin=\E[%p1%dT, + use=ansi+rep, + use=ecma+strikeout, + use=xterm+pcfkeys, + use=xterm+tmux, + use=xterm-basic, + +# These "ansi+XXX" blocks were added in ncurses 5.0: +ansi+rep, + rep=%p1%c\E[%p2%{1}%-%db, + +ansi+enq|ncurses extension for ANSI ENQ, + u6=\E[%i%d;%dR, + u7=\E[6n, + u8=\E[?%[;0123456789]c, + u9=\E[c, + +# Encode modifiers using parameters (see "Xterm Control Sequences" ctlseqs.ms). +# Note that this is unrelated to PCTERM. +# +# Some names are extensions allowed by ncurses, e.g., +# kDN, kDN5, kDN6, kLFT5, kLFT6, kRIT5, kRIT6, kUP, kUP5, kUP6 +# +# The uppercase names are made up, since there are no standards that apply. +# If they were limited to two characters, they could in principle be translated +# to termcap. However, termcap sizes are limited to 1023 bytes, so there is +# little point in ensuring that extended key names can be translated to +# termcap. A terminfo file can be up to 4096 bytes; using all extended keys +# that xterm can generate would in fact exceed that limit. +# +# The numbers correspond to the modifier parameters documented in Xterm +# Control Sequences: +# +# 2 Shift +# 3 Alt +# 4 Shift + Alt +# 5 Control +# 6 Shift + Control +# 7 Alt + Control +# 8 Shift + Alt + Control +# +# X/Open Curses defines some shift combinations, which are also used here +# where applicable. Since it does define some shift combinations, no number +# (2) is used for suffixing the made-up names. Some combinations are not +# useful, e.g., they may reboot your computer, or they may require too many +# fingers. I stopped at modifier 7, just to keep things simple -TD +# +# XTerm resources: +# --------------- +# The xterm+pcfn, xterm+pcf0, xterm+pcf1, xterm+pcf2 and xterm+pcf3 fragments +# correspond to default resource settings for xterm on a 104-key PC keyboard +# with 12 function-keys: +# +# *sunKeyboard:false +# *oldXtermFKeys:false +# *modifyCursorKeys:2 +# *modifyFunctionKeys:2 +# *ctrlFKeys:10 +# +# The key numbers are computed based on the modifiers: +# +# kf1-kf12 are F1-F12 +# kf13-kf24 are shift F1-F12 +# kf25-kf36 are control F1-F12 +# kf37-kf48 are control+shift F1-F12 +# kf49-kf60 are alt F1-F12 +# kf61-kf63 are shift-alt F1-F3 +# +# Note that ncurses would allow definition of kf64 and beyond, if there were +# an application that required it. +# +xterm+pcfkeys|fragment for PC-style keys, + use=xterm+app, + use=xterm+pcf2, + use=xterm+pce2, + use=xterm+pcc2, + +# This chunk is based on suggestions by Ailin Nemui and Nicholas Marriott, who +# asked for some of xterm's advanced features to be added to its terminfo +# entry. It defines extended capabilities not found in standard terminfo or +# termcap. These are useful in tmux, for instance, hence the name. +# +# One caveat in adding extended capabilities in ncurses is that if the names +# are longer than two characters, then they will not be visible through the +# termcap interface. +# +# Ms modifies the selection/clipboard. Its parameters are +# p1 = the storage unit (clipboard, selection or cut buffer) +# p2 = the base64-encoded clipboard content. +# +# Ss is used to set the cursor style as described by the DECSCUSR +# function to a block or underline. +# Se resets the cursor style to the terminal power-on default. +# +# Cs and Ce set and reset the cursor colour. +xterm+tmux|advanced xterm features used in tmux, + Cr=\E]112\007, + Cs=\E]12;%p1%s\007, + Ms=\E]52;%p1%s;%p2%s + \007, + Se=\E[2\sq, + Ss=\E[%p1%d\sq, +# +# The ctrlFKeys resource is only relevant to the xterm+pcfn and xterm+pcfN +# entries, since the modifyFunctionKeys resource overrides ctrlFKeys when it is +# positive. A different choice of ctrlFKeys would give a different set of +# function-key strings. +xterm+pcfn|fragment with modifyFunctionKeys:-1 and ctrlFKeys:10, + kf1=\EOP, + kf10=\E[21~, + kf11=\E[23~, + kf12=\E[24~, + kf13=\E[25~, + kf14=\E[26~, + kf15=\E[28~, + kf16=\E[29~, + kf17=\E[31~, + kf18=\E[32~, + kf19=\E[33~, + kf2=\EOQ, + kf20=\E[34~, + kf21=\E[42~, + kf22=\E[43~, + kf23=\E[44~, + kf24=\E[45~, + kf25=\E[46~, + kf26=\E[47~, + kf27=\E[48~, + kf28=\E[49~, + kf29=\E[50~, + kf3=\EOR, + kf30=\E[51~, + kf31=\E[52~, + kf32=\E[53~, + kf33=\E[54~, + kf34=\E[55~, + kf35=\E[56~, + kf36=\E[57~, + kf37=\E[58~, + kf38=\E[59~, + kf39=\E[60~, + kf4=\EOS, + kf40=\E[61~, + kf41=\E[62~, + kf42=\E[63~, + kf43=\E[64~, + kf44=\E[65~, + kf45=\E[66~, + kf46=\E[67~, + kf47=\E[68~, + kf48=\E[69~, + kf5=\E[15~, + kf6=\E[17~, + kf7=\E[18~, + kf8=\E[19~, + kf9=\E[20~, + +# Changing ctrlFKeys to 12 would let us number the keys using just shift- and +# control- modifiers: +# kf1-kf12 are F1-F12 +# kf13-kf24 are shift F1-F12 +# kf25-kf36 are control F1-F12 +# kf37-kf48 are control+shift F1-F12 +xterm+pcfN|fragment with modifyFunctionKeys:-1 and ctrlFKeys:12, + kf1=\EOP, + kf10=\E[21~, + kf11=\E[23~, + kf12=\E[24~, + kf13=\E[25~, + kf14=\E[26~, + kf15=\E[28~, + kf16=\E[29~, + kf17=\E[31~, + kf18=\E[32~, + kf19=\E[33~, + kf2=\EOQ, + kf20=\E[34~, + kf21=\E[42~, + kf22=\E[43~, + kf23=\E[44~, + kf24=\E[45~, + kf25=\E[46~, + kf26=\E[47~, + kf27=\E[48~, + kf28=\E[49~, + kf29=\E[50~, + kf3=\EOR, + kf30=\E[51~, + kf31=\E[52~, + kf32=\E[53~, + kf33=\E[54~, + kf34=\E[55~, + kf35=\E[56~, + kf36=\E[57~, + kf37=\E[58~, + kf38=\E[59~, + kf39=\E[60~, + kf4=\EOS, + kf40=\E[61~, + kf41=\E[62~, + kf42=\E[63~, + kf43=\E[64~, + kf44=\E[65~, + kf45=\E[66~, + kf46=\E[67~, + kf47=\E[68~, + kf48=\E[69~, + kf5=\E[15~, + kf6=\E[17~, + kf7=\E[18~, + kf8=\E[19~, + kf9=\E[20~, + +xterm+pcf0|fragment with modifyFunctionKeys:0, + kf1=\EOP, + kf10=\E[21~, + kf11=\E[23~, + kf12=\E[24~, + kf13=\EO2P, + kf14=\EO2Q, + kf15=\EO2R, + kf16=\EO2S, + kf17=\E[15;2~, + kf18=\E[17;2~, + kf19=\E[18;2~, + kf2=\EOQ, + kf20=\E[19;2~, + kf21=\E[20;2~, + kf22=\E[21;2~, + kf23=\E[23;2~, + kf24=\E[24;2~, + kf25=\EO5P, + kf26=\EO5Q, + kf27=\EO5R, + kf28=\EO5S, + kf29=\E[15;5~, + kf3=\EOR, + kf30=\E[17;5~, + kf31=\E[18;5~, + kf32=\E[19;5~, + kf33=\E[20;5~, + kf34=\E[21;5~, + kf35=\E[23;5~, + kf36=\E[24;5~, + kf37=\EO6P, + kf38=\EO6Q, + kf39=\EO6R, + kf4=\EOS, + kf40=\EO6S, + kf41=\E[15;6~, + kf42=\E[17;6~, + kf43=\E[18;6~, + kf44=\E[19;6~, + kf45=\E[20;6~, + kf46=\E[21;6~, + kf47=\E[23;6~, + kf48=\E[24;6~, + kf49=\EO3P, + kf5=\E[15~, + kf50=\EO3Q, + kf51=\EO3R, + kf52=\EO3S, + kf53=\E[15;3~, + kf54=\E[17;3~, + kf55=\E[18;3~, + kf56=\E[19;3~, + kf57=\E[20;3~, + kf58=\E[21;3~, + kf59=\E[23;3~, + kf6=\E[17~, + kf60=\E[24;3~, + kf61=\EO4P, + kf62=\EO4Q, + kf63=\EO4R, + kf7=\E[18~, + kf8=\E[19~, + kf9=\E[20~, + +# This is almost the same as xterm+pcf2 because the unmodified keys all happen +# to have a pattern that forces the modifier to the same position. +xterm+pcf1|fragment with modifyFunctionKeys:1, + kf1=\EOP, + kf10=\E[21~, + kf11=\E[23~, + kf12=\E[24~, + kf13=\E[2P, + kf14=\E[2Q, + kf15=\E[2R, + kf16=\E[2S, + kf17=\E[15;2~, + kf18=\E[17;2~, + kf19=\E[18;2~, + kf2=\EOQ, + kf20=\E[19;2~, + kf21=\E[20;2~, + kf22=\E[21;2~, + kf23=\E[23;2~, + kf24=\E[24;2~, + kf25=\E[5P, + kf26=\E[5Q, + kf27=\E[5R, + kf28=\E[5S, + kf29=\E[15;5~, + kf3=\EOR, + kf30=\E[17;5~, + kf31=\E[18;5~, + kf32=\E[19;5~, + kf33=\E[20;5~, + kf34=\E[21;5~, + kf35=\E[23;5~, + kf36=\E[24;5~, + kf37=\E[6P, + kf38=\E[6Q, + kf39=\E[6R, + kf4=\EOS, + kf40=\E[6S, + kf41=\E[15;6~, + kf42=\E[17;6~, + kf43=\E[18;6~, + kf44=\E[19;6~, + kf45=\E[20;6~, + kf46=\E[21;6~, + kf47=\E[23;6~, + kf48=\E[24;6~, + kf49=\E[3P, + kf5=\E[15~, + kf50=\E[3Q, + kf51=\E[3R, + kf52=\E[3S, + kf53=\E[15;3~, + kf54=\E[17;3~, + kf55=\E[18;3~, + kf56=\E[19;3~, + kf57=\E[20;3~, + kf58=\E[21;3~, + kf59=\E[23;3~, + kf6=\E[17~, + kf60=\E[24;3~, + kf61=\E[4P, + kf62=\E[4Q, + kf63=\E[4R, + kf7=\E[18~, + kf8=\E[19~, + kf9=\E[20~, + +xterm+pcf2|fragment with modifyFunctionKeys:2, + kf1=\EOP, + kf10=\E[21~, + kf11=\E[23~, + kf12=\E[24~, + kf13=\E[1;2P, + kf14=\E[1;2Q, + kf15=\E[1;2R, + kf16=\E[1;2S, + kf17=\E[15;2~, + kf18=\E[17;2~, + kf19=\E[18;2~, + kf2=\EOQ, + kf20=\E[19;2~, + kf21=\E[20;2~, + kf22=\E[21;2~, + kf23=\E[23;2~, + kf24=\E[24;2~, + kf25=\E[1;5P, + kf26=\E[1;5Q, + kf27=\E[1;5R, + kf28=\E[1;5S, + kf29=\E[15;5~, + kf3=\EOR, + kf30=\E[17;5~, + kf31=\E[18;5~, + kf32=\E[19;5~, + kf33=\E[20;5~, + kf34=\E[21;5~, + kf35=\E[23;5~, + kf36=\E[24;5~, + kf37=\E[1;6P, + kf38=\E[1;6Q, + kf39=\E[1;6R, + kf4=\EOS, + kf40=\E[1;6S, + kf41=\E[15;6~, + kf42=\E[17;6~, + kf43=\E[18;6~, + kf44=\E[19;6~, + kf45=\E[20;6~, + kf46=\E[21;6~, + kf47=\E[23;6~, + kf48=\E[24;6~, + kf49=\E[1;3P, + kf5=\E[15~, + kf50=\E[1;3Q, + kf51=\E[1;3R, + kf52=\E[1;3S, + kf53=\E[15;3~, + kf54=\E[17;3~, + kf55=\E[18;3~, + kf56=\E[19;3~, + kf57=\E[20;3~, + kf58=\E[21;3~, + kf59=\E[23;3~, + kf6=\E[17~, + kf60=\E[24;3~, + kf61=\E[1;4P, + kf62=\E[1;4Q, + kf63=\E[1;4R, + kf7=\E[18~, + kf8=\E[19~, + kf9=\E[20~, + +xterm+pcf3|fragment with modifyFunctionKeys:3, + kf1=\EOP, + kf10=\E[21~, + kf11=\E[23~, + kf12=\E[24~, + kf13=\E[>1;2P, + kf14=\E[>1;2Q, + kf15=\E[>1;2R, + kf16=\E[>1;2S, + kf17=\E[>15;2~, + kf18=\E[>17;2~, + kf19=\E[>18;2~, + kf2=\EOQ, + kf20=\E[>19;2~, + kf21=\E[>20;2~, + kf22=\E[>21;2~, + kf23=\E[>23;2~, + kf24=\E[>24;2~, + kf25=\E[>1;5P, + kf26=\E[>1;5Q, + kf27=\E[>1;5R, + kf28=\E[>1;5S, + kf29=\E[>15;5~, + kf3=\EOR, + kf30=\E[>17;5~, + kf31=\E[>18;5~, + kf32=\E[>19;5~, + kf33=\E[>20;5~, + kf34=\E[>21;5~, + kf35=\E[>23;5~, + kf36=\E[>24;5~, + kf37=\E[>1;6P, + kf38=\E[>1;6Q, + kf39=\E[>1;6R, + kf4=\EOS, + kf40=\E[>1;6S, + kf41=\E[>15;6~, + kf42=\E[>17;6~, + kf43=\E[>18;6~, + kf44=\E[>19;6~, + kf45=\E[>20;6~, + kf46=\E[>21;6~, + kf47=\E[>23;6~, + kf48=\E[>24;6~, + kf49=\E[>1;3P, + kf5=\E[15~, + kf50=\E[>1;3Q, + kf51=\E[>1;3R, + kf52=\E[>1;3S, + kf53=\E[>15;3~, + kf54=\E[>17;3~, + kf55=\E[>18;3~, + kf56=\E[>19;3~, + kf57=\E[>20;3~, + kf58=\E[>21;3~, + kf59=\E[>23;3~, + kf6=\E[17~, + kf60=\E[>24;3~, + kf61=\E[>1;4P, + kf62=\E[>1;4Q, + kf63=\E[>1;4R, + kf7=\E[18~, + kf8=\E[19~, + kf9=\E[20~, +# +# The "PC-style" modifier scheme was introduced in xterm patch #94 (1999/3/27) +# and revised in patch #167 (2002/8/24). +# +# The original assignments from patch #94 for cursor-keys had some technical +# issues: +# +# A parameter for a function-key to represent a modifier is just more +# bits. But for a cursor-key it may change the behavior of the +# application. For instance, emacs decodes the first parameter of a +# cursor-key as a repeat count. +# +# A parameterized string should (really) not begin with SS3 (\EO). +# Rather, CSI (\E[) should be used. +# +# For these reasons, the original assignments were deprecated. For +# compatibility reasons, they are still available as a setting of xterm's +# modifyCursorKeys resource. These fragments list the modified cursor-keys +# that might apply to xterm+pcfkeys with different values of that resource. +xterm+pcc3|fragment with modifyCursorKeys:3, + kLFT=\E[>1;2D, + kRIT=\E[>1;2C, + kind=\E[>1;2B, + kri=\E[>1;2A, + kDN=\E[>1;2B, + kDN3=\E[>1;3B, + kDN4=\E[>1;4B, + kDN5=\E[>1;5B, + kDN6=\E[>1;6B, + kDN7=\E[>1;7B, + kLFT3=\E[>1;3D, + kLFT4=\E[>1;4D, + kLFT5=\E[>1;5D, + kLFT6=\E[>1;6D, + kLFT7=\E[>1;7D, + kRIT3=\E[>1;3C, + kRIT4=\E[>1;4C, + kRIT5=\E[>1;5C, + kRIT6=\E[>1;6C, + kRIT7=\E[>1;7C, + kUP=\E[>1;2A, + kUP3=\E[>1;3A, + kUP4=\E[>1;4A, + kUP5=\E[>1;5A, + kUP6=\E[>1;6A, + kUP7=\E[>1;7A, + +xterm+pcc2|fragment with modifyCursorKeys:2, + kLFT=\E[1;2D, + kRIT=\E[1;2C, + kind=\E[1;2B, + kri=\E[1;2A, + kDN=\E[1;2B, + kDN3=\E[1;3B, + kDN4=\E[1;4B, + kDN5=\E[1;5B, + kDN6=\E[1;6B, + kDN7=\E[1;7B, + kLFT3=\E[1;3D, + kLFT4=\E[1;4D, + kLFT5=\E[1;5D, + kLFT6=\E[1;6D, + kLFT7=\E[1;7D, + kRIT3=\E[1;3C, + kRIT4=\E[1;4C, + kRIT5=\E[1;5C, + kRIT6=\E[1;6C, + kRIT7=\E[1;7C, + kUP=\E[1;2A, + kUP3=\E[1;3A, + kUP4=\E[1;4A, + kUP5=\E[1;5A, + kUP6=\E[1;6A, + kUP7=\E[1;7A, + +xterm+pcc1|fragment with modifyCursorKeys:1, + kLFT=\E[2D, + kRIT=\E[2C, + kind=\E[2B, + kri=\E[2A, + kDN=\E[2B, + kDN3=\E[3B, + kDN4=\E[4B, + kDN5=\E[5B, + kDN6=\E[6B, + kDN7=\E[7B, + kLFT3=\E[3D, + kLFT4=\E[4D, + kLFT5=\E[5D, + kLFT6=\E[6D, + kLFT7=\E[7D, + kRIT3=\E[3C, + kRIT4=\E[4C, + kRIT5=\E[5C, + kRIT6=\E[6C, + kRIT7=\E[7C, + kUP=\E[2A, + kUP3=\E[3A, + kUP4=\E[4A, + kUP5=\E[5A, + kUP6=\E[6A, + kUP7=\E[7A, + +xterm+pcc0|fragment with modifyCursorKeys:0, + kLFT=\EO2D, + kRIT=\EO2C, + kind=\EO2B, + kri=\EO2A, + kDN=\EO2B, + kDN3=\EO3B, + kDN4=\EO4B, + kDN5=\EO5B, + kDN6=\EO6B, + kDN7=\EO7B, + kLFT3=\EO3D, + kLFT4=\EO4D, + kLFT5=\EO5D, + kLFT6=\EO6D, + kLFT7=\EO7D, + kRIT3=\EO3C, + kRIT4=\EO4C, + kRIT5=\EO5C, + kRIT6=\EO6C, + kRIT7=\EO7C, + kUP=\EO2A, + kUP3=\EO3A, + kUP4=\EO4A, + kUP5=\EO5A, + kUP6=\EO6A, + kUP7=\EO7A, + +# The home/end keys on the editing keypad are also treated as cursor keys. +xterm+pce3|fragment with modifyCursorKeys:3, + kDC=\E[>3;2~, + kEND=\E[>1;2F, + kHOM=\E[>1;2H, + kIC=\E[>2;2~, + kNXT=\E[>6;2~, + kPRV=\E[>5;2~, + kDC3=\E[>3;3~, + kDC4=\E[>3;4~, + kDC5=\E[>3;5~, + kDC6=\E[>3;6~, + kDC7=\E[>3;7~, + kEND3=\E[>1;3F, + kEND4=\E[>1;4F, + kEND5=\E[>1;5F, + kEND6=\E[>1;6F, + kEND7=\E[>1;7F, + kHOM3=\E[>1;3H, + kHOM4=\E[>1;4H, + kHOM5=\E[>1;5H, + kHOM6=\E[>1;6H, + kHOM7=\E[>1;7H, + kIC3=\E[>2;3~, + kIC4=\E[>2;4~, + kIC5=\E[>2;5~, + kIC6=\E[>2;6~, + kIC7=\E[>2;7~, + kNXT3=\E[>6;3~, + kNXT4=\E[>6;4~, + kNXT5=\E[>6;5~, + kNXT6=\E[>6;6~, + kNXT7=\E[>6;7~, + kPRV3=\E[>5;3~, + kPRV4=\E[>5;4~, + kPRV5=\E[>5;5~, + kPRV6=\E[>5;6~, + kPRV7=\E[>5;7~, + use=xterm+pce0, + +xterm+pce2|fragment with modifyCursorKeys:2, + kDC=\E[3;2~, + kEND=\E[1;2F, + kHOM=\E[1;2H, + kIC=\E[2;2~, + kNXT=\E[6;2~, + kPRV=\E[5;2~, + kDC3=\E[3;3~, + kDC4=\E[3;4~, + kDC5=\E[3;5~, + kDC6=\E[3;6~, + kDC7=\E[3;7~, + kEND3=\E[1;3F, + kEND4=\E[1;4F, + kEND5=\E[1;5F, + kEND6=\E[1;6F, + kEND7=\E[1;7F, + kHOM3=\E[1;3H, + kHOM4=\E[1;4H, + kHOM5=\E[1;5H, + kHOM6=\E[1;6H, + kHOM7=\E[1;7H, + kIC3=\E[2;3~, + kIC4=\E[2;4~, + kIC5=\E[2;5~, + kIC6=\E[2;6~, + kIC7=\E[2;7~, + kNXT3=\E[6;3~, + kNXT4=\E[6;4~, + kNXT5=\E[6;5~, + kNXT6=\E[6;6~, + kNXT7=\E[6;7~, + kPRV3=\E[5;3~, + kPRV4=\E[5;4~, + kPRV5=\E[5;5~, + kPRV6=\E[5;6~, + kPRV7=\E[5;7~, + use=xterm+pce0, + +xterm+pce1|fragment with modifyCursorKeys:1, + kDC=\E[3;2~, + kEND=\E[2F, + kHOM=\E[2H, + kIC=\E[2;2~, + kNXT=\E[6;2~, + kPRV=\E[5;2~, + kDC3=\E[3;3~, + kDC4=\E[3;4~, + kDC5=\E[3;5~, + kDC6=\E[3;6~, + kDC7=\E[3;7~, + kEND3=\E[3F, + kEND4=\E[4F, + kEND5=\E[5F, + kEND6=\E[6F, + kEND7=\E[7F, + kHOM3=\E[3H, + kHOM4=\E[4H, + kHOM5=\E[5H, + kHOM6=\E[6H, + kHOM7=\E[7H, + kIC3=\E[2;3~, + kIC4=\E[2;4~, + kIC5=\E[2;5~, + kIC6=\E[2;6~, + kIC7=\E[2;7~, + kNXT3=\E[6;3~, + kNXT4=\E[6;4~, + kNXT5=\E[6;5~, + kNXT6=\E[6;6~, + kNXT7=\E[6;7~, + kPRV3=\E[5;3~, + kPRV4=\E[5;4~, + kPRV5=\E[5;5~, + kPRV6=\E[5;6~, + kPRV7=\E[5;7~, + use=xterm+pce0, + +xterm+pce0|fragment with modifyCursorKeys:0, + kDC=\E[3;2~, + kEND=\EO2F, + kHOM=\EO2H, + kIC=\E[2;2~, + kNXT=\E[6;2~, + kPRV=\E[5;2~, + kDC3=\E[3;3~, + kDC4=\E[3;4~, + kDC5=\E[3;5~, + kDC6=\E[3;6~, + kDC7=\E[3;7~, + kEND3=\EO3F, + kEND4=\EO4F, + kEND5=\EO5F, + kEND6=\EO6F, + kEND7=\EO7F, + kHOM3=\EO3H, + kHOM4=\EO4H, + kHOM5=\EO5H, + kHOM6=\EO6H, + kHOM7=\EO7H, + kIC3=\E[2;3~, + kIC4=\E[2;4~, + kIC5=\E[2;5~, + kIC6=\E[2;6~, + kIC7=\E[2;7~, + kNXT3=\E[6;3~, + kNXT4=\E[6;4~, + kNXT5=\E[6;5~, + kNXT6=\E[6;6~, + kNXT7=\E[6;7~, + kPRV3=\E[5;3~, + kPRV4=\E[5;4~, + kPRV5=\E[5;5~, + kPRV6=\E[5;6~, + kPRV7=\E[5;7~, + use=xterm+edit, + +# This is an ncurses extension +ecma+strikeout|ECMA-48 strikeout/crossed-out, + rmxx=\E[29m, + smxx=\E[9m, +# +# This chunk is used for building the VT220/Sun/PC keyboard variants. +xterm-basic|modern xterm terminal emulator - common, + OTbs, + am, + bce, + km, + mc5i, + mir, + msgr, + xenl, + AX, + XT, + colors#8, + cols#80, + it#8, + lines#24, + pairs#64, + acsc=``aaffggiijjkkllmmnnooppqqr + rssttuuvvwwxxyyzz{{||}}~~, + bel=^G, + blink=\E[5m, + bold=\E[1m, + cbt=\E[Z, + civis=\E[?25l, + clear=\E[H\E[2J, + cnorm=\E[?12l\E[?25h, + cr=\r, + csr=\E[%i%p1%d;%p2%dr, + cub=\E[%p1%dD, + cub1=^H, + cud=\E[%p1%dB, + cud1=\n, + cuf=\E[%p1%dC, + cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, + cuu=\E[%p1%dA, + cuu1=\E[A, + cvvis=\E[?12;25h, + dch=\E[%p1%dP, + dch1=\E[P, + dim=\E[2m, + dl=\E[%p1%dM, + dl1=\E[M, + ech=\E[%p1%dX, + ed=\E[J, + el=\E[K, + el1=\E[1K, + flash=\E[?5h$<100/>\E[?5l, + home=\E[H, + hpa=\E[%i%p1%dG, + ht=^I, + hts=\EH, + ich=\E[%p1%d@, + il=\E[%p1%dL, + il1=\E[L, + ind=\n, + invis=\E[8m, + is2=\E[!p\E[?3;4l\E[4l\E>, + kmous=\E[M, + mc0=\E[i, + mc4=\E[4i, + mc5=\E[5i, + meml=\El, + memu=\Em, + op=\E[39;49m, + rc=\E8, + rev=\E[7m, + ri=\EM, + ritm=\E[23m, + rmacs=\E(B, + rmam=\E[?7l, + rmir=\E[4l, + rmkx=\E[?1l\E>, + rmm=\E[?1034l, + rmso=\E[27m, + rmul=\E[24m, + rs1=\Ec, + rs2=\E[!p\E[?3;4l\E[4l\E>, + sc=\E7, + setab=\E[4%p1%dm, + setaf=\E[3%p1%dm, + setb=\E[4 + %? + %p1%{1}%= + %t4 + %e + %p1%{3}%= + %t6 + %e + %p1%{4}%= + %t1 + %e + %p1%{6}%= + %t3 + %e + %p1%d + %; + m, + setf=\E[3 + %? + %p1%{1}%= + %t4 + %e + %p1%{3}%= + %t6 + %e + %p1%{4}%= + %t1 + %e + %p1%{6}%= + %t3 + %e + %p1%d + %; + m, + sgr= + %? + %p9 + %t\E(0 + %e + \E(B + %; + \E[0 + %? + %p6 + %t;1 + %; + %? + %p5 + %t;2 + %; + %? + %p2 + %t;4 + %; + %? + %p1%p3%| + %t;7 + %; + %? + %p4 + %t;5 + %; + %? + %p7 + %t;8 + %; + m, + sgr0=\E(B\E[m, + sitm=\E[3m, + smacs=\E(0, + smam=\E[?7h, + smir=\E[4h, + smkx=\E[?1h\E=, + smm=\E[?1034h, + smso=\E[7m, + smul=\E[4m, + tbc=\E[3g, + vpa=\E[%i%p1%dd, + E3=\E[3J, + use=ansi+enq, + use=xterm+alt+title, + use=xterm+kbs, +# +# The xterm-new description has all of the features, but is not completely +# compatible with vt220. If you are using a Sun or PC keyboard, set the +# sunKeyboard resource to true: +# + maps the editing keypad +# + interprets control-function-key as a second array of keys, so a +# 12-fkey keyboard can support vt220's 20-fkeys. +# + maps numeric keypad "+" to ",". +# + uses DEC-style control sequences for the application keypad. +# +# Some packagers modify xterm's resource definitions to provide extra function +# keys by using the shift-modifier in the translations resource. However, that +# interferes with the DECUDK functionality. +# +xterm-vt220|xterm emulating vt220, + ka1=\EOw, + ka3=\EOy, + kb2=\EOu, + kc1=\EOq, + kc3=\EOs, + kcbt=\E[Z, + kend=\E[4~, + kent=\EOM, + kf1=\EOP, + kf10=\E[21~, + kf11=\E[23~, + kf12=\E[24~, + kf13=\E[25~, + kf14=\E[26~, + kf15=\E[28~, + kf16=\E[29~, + kf17=\E[31~, + kf18=\E[32~, + kf19=\E[33~, + kf2=\EOQ, + kf20=\E[34~, + kf3=\EOR, + kf4=\EOS, + kf5=\E[15~, + kf6=\E[17~, + kf7=\E[18~, + kf8=\E[19~, + kf9=\E[20~, + khome=\E[1~, + kich1=\E[2~, + knp=\E[6~, + kpp=\E[5~, + ka2=\EOx, + kb1=\EOt, + kb3=\EOv, + kc2=\EOr, + use=xterm+app, + use=xterm+edit, + use=xterm-basic, +# +xterm-vt52|xterm emulating dec vt52, + cols#80, + it#8, + lines#24, + acsc=``aaffggjjkkllmmnnooppqqrrs + sttuuvvwwxxyyzz{{||}}~~, + bel=^G, + clear=\EH\EJ, + cr=\r, + cub1=\ED, + cud1=\EB, + cuf1=\EC, + cup=\EY%p1%'\s'%+%c%p2%'\s'%+%c, + cuu1=\EA, + ed=\EJ, + el=\EK, + home=\EH, + ht=^I, + ind=\n, + kcub1=\ED, + kcud1=\EB, + kcuf1=\EC, + kcuu1=\EA, + nel=\r\n, + ri=\EI, + rmacs=\EG, + smacs=\EF, + use=xterm+kbs, +# +# Sun does not number the function keys this way in their sparse termcap; their +# terminal descriptions ignore the keypads. kb(7M) states that there are codes +# reserved for 64 function keys, 16 each in left, right, top and bottom. Each +# keyboard type has a different number of function keys in different +# arrangements. Using xkeycaps for reference: +# +# Type 3: left 10, top 9, right 15 +# ------ +# kf1-kf9 are XK_F1-XK_F9 +# There is no kf10 on this keyboard type. +# kf11-kf20 are keysyms XK_L1 through XK_L10. +# kf31-kf45 are keysyms XK_R1 through XK_R15. +# +# However, X's keysymdef.h is hard-coded to make +# XK_L1==XK_F11 and +# XK_R1==XK_F21, +# by someone who was unfamiliar with terminal types other than Sun's. So +# xterm uses the internal X keysymbols, but the terminfo entry uses the Sun +# numbering scheme. +# +# Type 4: left 11, top 12, right 15 +# ------ +# The left-keypad contains an unnumbered Help-key. +# The right-keypad also contains NumLock, Ins, Del, Enter, + and - keys which +# do not appear to be part of the R-sequence. +# +# Type 5: left 9, top 12, right (more than one keypad) +# ------ +# These keyboards do not use the same naming convention, look like a hybrid of +# the type 4 and IBM keyboards. +# +# XTerm resources: +# --------------- +# Set the modifyFunctionKeys resource to negative (-1) to make it simple to +# enter the higher function-key values using shift- and control-modifiers. +# +xterm-sun|xterm with sun function keys, + kb2=\E[218z, + kcpy=\E[197z, + kcub1=\EOD, + kcud1=\EOB, + kcuf1=\EOC, + kcuu1=\EOA, + kdch1=\E[3z, + kend=\E[220z, + kent=\EOM, + kf1=\E[224z, + kf10=\E[233z, + kf11=\E[192z, + kf12=\E[193z, + kf13=\E[194z, + kf14=\E[195z, + kf15=\E[196z, + kf17=\E[198z, + kf18=\E[199z, + kf19=\E[200z, + kf2=\E[225z, + kf20=\E[201z, + kf3=\E[226z, + kf31=\E[208z, + kf32=\E[209z, + kf33=\E[210z, + kf34=\E[211z, + kf35=\E[212z, + kf36=\E[213z, + kf38=\E[215z, + kf4=\E[227z, + kf40=\E[217z, + kf42=\E[219z, + kf44=\E[221z, + kf45=\E[222z, + kf46=\E[234z, + kf47=\E[235z, + kf5=\E[228z, + kf6=\E[229z, + kf7=\E[230z, + kf8=\E[231z, + kf9=\E[232z, + kfnd=\E[200z, + khlp=\E[196z, + khome=\E[214z, + kich1=\E[2z, + knp=\E[222z, + kpp=\E[216z, + kund=\E[195z, + use=xterm-basic, +# +xterm-hp|xterm with hpterm function keys, + kclr=\EJ, + kcub1=\ED, + kcud1=\EB, + kcuf1=\EC, + kcuu1=\EA, + kdch1=\EP, + kend=\EF, + kf1=\Ep, + kf2=\Eq, + kf3=\Er, + kf4=\Es, + kf5=\Et, + kf6=\Eu, + kf7=\Ev, + kf8=\Ew, + khome=\Eh, + kich1=\EQ, + knp=\ES, + kpp=\ET, + use=xterm-basic, +# +# scoterm implements 48 function-keys using shift- and control-modifiers to +# multiple 12 function-keys. X has a hard-coded limit of 35 function-keys, +# but xterm can represent larger values. +# +# XTerm resources: +# --------------- +# Set the modifyFunctionKeys resource to negative (-1) to make it simple to +# enter the higher function-key values using shift- and control-modifiers. +# +# Also, set ctrlFKeys resource to 12 (the default is 10) to make xterm see 48 +# function-keys on a keyboard with 12 function-keys and 4 control/shift +# modifier combinations. +# +xterm-sco|xterm with SCO function keys, + kbeg=\E[E, + kdch1=^?, + kf1=\E[M, + kf10=\E[V, + kf11=\E[W, + kf12=\E[X, + kf13=\E[Y, + kf14=\E[Z, + kf15=\E[a, + kf16=\E[b, + kf17=\E[c, + kf18=\E[d, + kf19=\E[e, + kf2=\E[N, + kf20=\E[f, + kf21=\E[g, + kf22=\E[h, + kf23=\E[i, + kf24=\E[j, + kf25=\E[k, + kf26=\E[l, + kf27=\E[m, + kf28=\E[n, + kf29=\E[o, + kf3=\E[O, + kf30=\E[p, + kf31=\E[q, + kf32=\E[r, + kf33=\E[s, + kf34=\E[t, + kf35=\E[u, + kf36=\E[v, + kf37=\E[w, + kf38=\E[x, + kf39=\E[y, + kf4=\E[P, + kf40=\E[z, + kf41=\E[@, + kf42=\E[[, + kf43=\E[\\, + kf44=\E[], + kf45=\E[\^, + kf46=\E[_, + kf47=\E[`, + kf48=\E[{, + kf5=\E[Q, + kf6=\E[R, + kf7=\E[S, + kf8=\E[T, + kf9=\E[U, + kich1=\E[L, + kmous=\E[>M, + knp=\E[G, + kpp=\E[I, + use=xterm+noapp, + use=xterm-basic, +# +# Other variants (these are all very old entries, from X11R5): +xterm-24|xterms|vs100|xterm terminal emulator (X Window System), + lines#24, + use=xterm-old, +xterm-65|xterm with tall window 65x80 (X Window System), + lines#65, + use=xterm-old, +xterm-bold|xterm with bold instead of underline (X Window System), + sgr= + %? + %p9 + %t\016 + %e + \017 + %; + B\E[0 + %? + %p6 + %t;1 + %; + %? + %p2 + %t;1 + %; + %? + %p1%p3%| + %t;7 + %; + m, + smso=\E[7m, + smul=\E[1m, + use=xterm-old, +xterm-boldso|xterm with bold for standout (X Window System), + rmso=\E[m, + smso=\E[1m, + use=xterm-old, +xterm-mono|monochrome xterm, + bce@, + colors@, + ncv@, + pairs@, + op@, + setab@, + setaf@, + setb@, + setf@, + sgr@, + use=xterm-old, +# +# VTxxx terminals are usually set up so that full-screen applications will use +# the cursor application mode strings. This is good for full-screen +# applications, including legacy applications which may have hard-coded +# behavior, but bad for interactive shells (e.g., tcsh, bash) which use arrow +# keys to scroll through a history of command strings. +# +# To see the difference between normal/application modes, consider this example: +# + In normal (non-application) mode, the terminal transmits a down-arrow +# as \E[C, which happens to echo as a down-arrow. +# + In application mode the terminal transmits \EOC, which echoes as C. +# That is because the \EO is the SS3 control, which says to use the +# character from the G3 character set for the next cell. +# +# One example of hard-coded behavior would be for applications written to work +# with VT52 and VT100 terminals. If the application's parser ignores 'O' and +# '?' characters after the escape, then the cursor and keypad strings for the +# two terminals are the same. (Indeed, one of the first curses applications +# which I used did something like this to cover "ANSI" terminals -TD). +# +# To make this work (leaving the cursor keys in normal mode), we have to adjust +# the terminal initialization sequences: +# +# smkx/rmkx set/reset the cursor and keypad application modes. We retain +# the latter (otherwise many applications fail). +# +# smcup/rmcup set/restore cursor-addressing mode for full-screen +# applications. For xterm, this normally means the alternate +# screen, which is not compatible with interactive shells. Some +# programs are "smart" and disable these. +# +xterm-noapp|xterm with cursor keys in normal mode, + rmcup@, + rmkx=\E>, + smcup@, + smkx=\E=, + use=xterm+noapp, + use=xterm, + +xterm+noapp|fragment with cursor keys in normal mode, + kcub1=\E[D, + kcud1=\E[B, + kcuf1=\E[C, + kcuu1=\E[A, + use=xterm+noapp+pc, + +xterm+app|fragment with cursor keys in application mode, + kcub1=\EOD, + kcud1=\EOB, + kcuf1=\EOC, + kcuu1=\EOA, + use=xterm+app+pc, + +xterm+noapp+pc|fragment for noapp pc-style home/end, + kend=\E[F, + khome=\E[H, + +xterm+app+pc|fragment for app pc-style home/end, + kend=\EOF, + khome=\EOH, + +xterm+edit|fragment for 6-key editing-keypad, + kdch1=\E[3~, + kich1=\E[2~, + knp=\E[6~, + kpp=\E[5~, + use=xterm+pc+edit, + +xterm+decedit|fragment for vt220 6-key editing-keypad, + kdch1=\E[3~, + kich1=\E[2~, + knp=\E[6~, + kpp=\E[5~, + use=xterm+vt+edit, + +xterm+pc+edit|fragment for pc-style editing keypad, + kend=\E[4~, + khome=\E[1~, + +xterm+vt+edit|fragment for vt220-style editing keypad, + kfnd=\E[1~, + kslt=\E[4~, + +xterm+noalt|xterm without altscreen, + rmcup@, + smcup@, + +xterm+alt1049|xterm 90 feature, + rmcup=\E[?1049l, + smcup=\E[?1049h, + +xterm+titlestack|xterm 251 feature, + rmcup=\E[23;0;0t, + smcup=\E[22;0;0t, + +xterm+alt+title|xterm 90 and 251 features combined, + rmcup=\E[?1049l\E[23;0;0t, + smcup=\E[?1049h\E[22;0;0t, +# +# This should work for the commonly used "color xterm" variations (XFree86 +# xterm, color_xterm, nxterm, rxvt). Note that it does not set 'bce', so for +# XFree86 and and rxvt, some applications that use colors will be less +# efficient, and in a few special cases (with "smart" optimization) the wrong +# color will be painted in spots. +xterm-color|generic "ANSI" color xterm (X Window System), + colors#8, + ncv@, + pairs#64, + op=\E[m, + setab=\E[4%p1%dm, + setaf=\E[3%p1%dm, + use=xterm-r6, +# +# vi may work better with this entry, because vi +# doesn't use insert mode much +xterm-ic|xterm-vi|xterm with insert character instead of insert mode, + mir@, + ich=\E[%p1%d@, + ich1=\E[@, + rmir@, + smir@, + use=xterm, +# +# This is used only for testing (it's not relevant to DEC VTxxx terminals, but +# to ncurses). +xterm-xmc|xterm with magic-cookie glitch, + xmc#1, + use=xterm-new, +# +# This one also is primarily for testing ncurses; while the ISO 6429 defines +# the REP control, none of the DEC VTxxx terminals (VT52 through VT420) support +# it. +xterm-rep|xterm with repeat-character control, + rep=%p1%c\E[%p2%{1}%-%db, + use=xterm-new, +# +# This is mainly for testing xterm; the real VT220 will not let you switch +# character sets without first altering the keyboard language in the setup +# screen. Some emulators allow this anyway. (Note that these strings are +# normally used only for printers). The parameter to csnm and scs is the same +# in both cases: the keyboard language parameter returned by CSI ? 2 6 n. +xterm-nrc|xterm with VT220 national replacement character sets, + csnm= + %? + %p1%{1}%= + %tNorth\sAmerican + %e + %p1%{2}%= + %tBritish + %e + %p1%{3}%= + %tFlemish + %e + %p1%{4}%= + %tFrench\sCanadian + %e + %p1%{5}%= + %tDanish + %e + %p1%{6}%= + %tFinnish + %e + %p1%{7}%= + %tGerman + %e + %p1%{8}%= + %tDutch + %e + %p1%{9}%= + %tItalian + %e + %p1%{10}%= + %tSwiss\s(French) + %e + %p1%{11}%= + %tSwiss\s(German) + %e + %p1%{12}%= + %tSwedish + %e + %p1%{13}%= + %tNorwegian + %e + %p1%{14}%= + %tFrench/Belgian + %e + %p1%{15}%= + %tSpanish + %;, + scs= + %? + %p1%{1}%= + %t\E(B + %e + %p1%{2}%= + %t\E(A + %e + %p1%{3}%= + %t\E(R + %e + %p1%{4}%= + %t\E(9 + %e + %p1%{5}%= + %t\E(E + %e + %p1%{6}%= + %t\E(5 + %e + %p1%{7}%= + %t\E(K + %e + %p1%{8}%= + %t\E(4 + %e + %p1%{9}%= + %t\E(Y + %e + %p1%{10}%= + %t\E(= + %e + %p1%{11}%= + %t\E(= + %e + %p1%{12}%= + %t\E(7 + %e + %p1%{13}%= + %t\E(E + %e + %p1%{14}%= + %t\E(R + %e + %p1%{15}%= + %t\E(Z + %;, + use=xterm-new, +# +# Foreground 0-15 maps (with toggles) into 30-37 & 90-97 +# Background 0-15 maps (with toggles) into 40-47 & 100-107 +# +# Originally I suppressed setaf/setab, since ANSI specifies only 8 colors, but +# Stephen Marley persuaded me to allow the "ANSI" color controls to extend to +# 16 colors. (Note that ncurses 4.2 uses setf/setb from this description; +# however 5.0 selects either according to their availability). - T.Dickey +# +# SVr4 curses does not use more than 8 colors anyway, so using 16 colors is +# either for terminfo-level applications or via ncurses. +xterm-16color|xterm with 16 colors, + colors#16, + pairs#0x100, + setab=\E[ + %? + %p1%{8}%< + %t%p1%{40}%+ + %e + %p1%{92}%+ + %; + %dm, + setaf=\E[ + %? + %p1%{8}%< + %t%p1%{30}%+ + %e + %p1%{82}%+ + %; + %dm, + setb= + %p1%{8}%/%{6}%*%{4}%+\E[%d%p1%{8}%m%Pa + %?%ga%{1}%= + %t4 + %e%ga%{3}%= + %t6 + %e%ga%{4}%= + %t1 + %e%ga%{6}%= + %t3 + %e%ga%d + %; + m, + setf= + %p1%{8}%/%{6}%*%{3}%+\E[%d%p1%{8}%m%Pa + %?%ga%{1}%= + %t4 + %e%ga%{3}%= + %t6 + %e%ga%{4}%= + %t1 + %e%ga%{6}%= + %t3 + %e%ga%d + %; + m, + use=xterm+256color, + use=xterm-new, + +# "indexed color" is mentioned without definition in ISO 8613-6 (ITU T.416). +# +# This implementation uses a 256-element color map where the first 16 entries +# are shared with the aixterm-compatible colors (and in turn the first 8 are +# shared with the ANSI colors). The three levels (256, 16, 8) account for the +# use of a conditional expression in setaf/setab which reduces the number of +# characters sent to the screen for typical applications. +# +# 256 colors should give 65536 pairs, but SVr4 (legacy) terminfo stores numbers +# in a signed short. Most people will not notice problems with only 32767 +# pairs. With ncurses 6.1, numbers are stored in a signed integer (at least +# 32-bits), and the inconsistency regarding pairs is eliminated. +xterm+256color|xterm 256-color feature, + ccc, + colors#0x100, + pairs#0x10000, + initc=\E]4; + %p1%d;rgb\:%p2%{255}%*%{1000}%/%2.2X/%p3%{255}%*%{1000}%/%2.2X/%p4%{255}%*%{1000}%/%2.2X\E\\, + oc=\E]104\007, + rs1=\Ec\E]104\007, + setab=\E[ + %? + %p1%{8}%< + %t4%p1%d + %e + %p1%{16}%< + %t10%p1%{8}%-%d + %e48;5; + %p1%d + %; + m, + setaf=\E[ + %? + %p1%{8}%< + %t3%p1%d + %e + %p1%{16}%< + %t9%p1%{8}%-%d + %e38;5; + %p1%d + %; + m, + setb@, + setf@, +xterm-256color|xterm with 256 colors, + use=xterm+256color, + use=xterm-new, +xterm-88color|xterm with 88 colors, + colors#88, + pairs#7744, + use=xterm-256color, + +# "direct color" is mentioned without definition in ISO 8613-6 (ITU T.416). +# +# This is a particular implementation which assume 8-bit values for red, green, +# and blue. Other encodings are possible; none are addressed by that standard. +# +# The "RGB" flag is an ncurses 6.1 extension which tells the library how to +# quickly compute the color-content for a given color value. +# +# Like xterm+256color, this uses a conditional expression. But it does that +# for a different reason: to make it readily usable for applications which +# print text but also use RGB colors, it uses a color map for the usual ANSI +# colors (0-7) and RGB colors for the remaining range of the color value. +xterm+direct|xterm with direct-color indexing, + RGB, + colors#0x1000000, + pairs#0x10000, + initc@, + op=\E[39;49m, + setab=\E[ + %? + %p1%{8}%< + %t4%p1%d + %e48\:2\:\: + %p1%{65536}%/%d\:%p1%{256}%/%{255}%&%d\:%p1%{255}%&%d + %; + m, + setaf=\E[ + %? + %p1%{8}%< + %t3%p1%d + %e38\:2\:\: + %p1%{65536}%/%d\:%p1%{256}%/%{255}%&%d\:%p1%{255}%&%d + %; + m, + setb@, + setf@, +xterm-direct|xterm with direct-color indexing, + use=xterm+direct, + use=xterm, +# +# This is an 8-bit version of xterm, which emulates DEC vt220 with ANSI color. +# To use it, your decTerminalID resource must be set to 200 or above, and the +# sunKeyboard resource set to true. +# +# HTS \E H \210 +# RI \E M \215 +# SS3 \E O \217 +# CSI \E [ \233 +# +xterm-8bit|xterm terminal emulator with 8-bit controls (X Window System), + OTbs, + am, + bce, + km, + mc5i, + mir, + msgr, + npc, + xenl, + AX, + colors#8, + cols#80, + it#8, + lines#24, + pairs#64, + acsc=``aaffggiijjkkllmmnnooppqqr + rssttuuvvwwxxyyzz{{||}}~~, + bel=^G, + blink=\2335m, + bold=\2331m, + cbt=\233Z, + civis=\233?25l, + clear=\233H\2332J, + cnorm=\233?25l\233?25h, + cr=\r, + csr=\233%i%p1%d;%p2%dr, + cub=\233%p1%dD, + cub1=^H, + cud=\233%p1%dB, + cud1=\n, + cuf=\233%p1%dC, + cuf1=\233C, + cup=\233%i%p1%d;%p2%dH, + cuu=\233%p1%dA, + cuu1=\233A, + cvvis=\233?12;25h, + dch=\233%p1%dP, + dch1=\233P, + dl=\233%p1%dM, + dl1=\233M, + ech=\233%p1%dX, + ed=\233J, + el=\233K, + el1=\2331K, + flash=\233?5h$<100/>\233?5l, + home=\233H, + hpa=\233%i%p1%dG, + ht=^I, + hts=\210, + ich=\233%p1%d@, + il=\233%p1%dL, + il1=\233L, + ind=\n, + invis=\2338m, + is2=\E[62"p\E\sG\233m\233?7h\E> + \E7\233?1;3;4;6l\2334l\233r + \E8, + ka1=\217w, + ka3=\217u, + kb2=\217y, + kbeg=\217E, + kc1=\217q, + kc3=\217s, + kcbt=\233Z, + kcub1=\217D, + kcud1=\217B, + kcuf1=\217C, + kcuu1=\217A, + kdch1=\2333~, + kend=\2334~, + kent=\217M, + kf1=\23311~, + kf10=\23321~, + kf11=\23323~, + kf12=\23324~, + kf13=\23325~, + kf14=\23326~, + kf15=\23328~, + kf16=\23329~, + kf17=\23331~, + kf18=\23332~, + kf19=\23333~, + kf2=\23312~, + kf20=\23334~, + kf3=\23313~, + kf4=\23314~, + kf5=\23315~, + kf6=\23317~, + kf7=\23318~, + kf8=\23319~, + kf9=\23320~, + khome=\2331~, + kich1=\2332~, + kmous=\233M, + knp=\2336~, + kpp=\2335~, + mc0=\233i, + mc4=\2334i, + mc5=\2335i, + meml=\El, + memu=\Em, + op=\23339;49m, + rc=\E8, + rev=\2337m, + ri=\215, + rmacs=\E(B, + rmam=\233?7l, + rmcup=\233?1049l, + rmir=\2334l, + rmkx=\233?1l\E>, + rmso=\23327m, + rmul=\23324m, + rs1=\Ec, + rs2=\E[62"p\E\sG\233m\233?7h\E> + \E7\233?1;3;4;6l\2334l\233r + \E8, + sc=\E7, + setab=\2334%p1%dm, + setaf=\2333%p1%dm, + setb=\2334 + %? + %p1%{1}%= + %t4 + %e + %p1%{3}%= + %t6 + %e + %p1%{4}%= + %t1 + %e + %p1%{6}%= + %t3 + %e + %p1%d + %; + m, + setf=\2333 + %? + %p1%{1}%= + %t4 + %e + %p1%{3}%= + %t6 + %e + %p1%{4}%= + %t1 + %e + %p1%{6}%= + %t3 + %e + %p1%d + %; + m, + sgr=\2330 + %? + %p6 + %t;1 + %; + %? + %p2 + %t;4 + %; + %? + %p1%p3%| + %t;7 + %; + %? + %p4 + %t;5 + %; + %? + %p7 + %t;8 + %; + m + %? + %p9 + %t\E(0 + %e + \E(B + %;, + sgr0=\2330m\E(B, + smacs=\E(0, + smam=\233?7h, + smcup=\233?1049h, + smir=\2334h, + smkx=\233?1h\E=, + smso=\2337m, + smul=\2334m, + tbc=\2333g, + u6=\233[%i%d;%dR, + u7=\E[6n, + u8=\233[?%[;0123456789]c, + u9=\E[c, + vpa=\233%i%p1%dd, + use=xterm+kbs, +# +xterm-xf86-v44|xterm terminal emulator (XFree86 4.4 Window System), + OTbs, + am, + bce, + km, + mc5i, + mir, + msgr, + npc, + xenl, + AX, + XT, + colors#8, + cols#80, + it#8, + lines#24, + pairs#64, + acsc=``aaffggiijjkkllmmnnooppqqr + rssttuuvvwwxxyyzz{{||}}~~, + bel=^G, + blink=\E[5m, + bold=\E[1m, + cbt=\E[Z, + civis=\E[?25l, + clear=\E[H\E[2J, + cnorm=\E[?12l\E[?25h, + cr=\r, + csr=\E[%i%p1%d;%p2%dr, + cub=\E[%p1%dD, + cub1=^H, + cud=\E[%p1%dB, + cud1=\n, + cuf=\E[%p1%dC, + cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, + cuu=\E[%p1%dA, + cuu1=\E[A, + cvvis=\E[?12;25h, + dch=\E[%p1%dP, + dch1=\E[P, + dl=\E[%p1%dM, + dl1=\E[M, + ech=\E[%p1%dX, + ed=\E[J, + el=\E[K, + el1=\E[1K, + enacs=\E(B\E)0, + flash=\E[?5h$<100/>\E[?5l, + home=\E[H, + hpa=\E[%i%p1%dG, + ht=^I, + hts=\EH, + ich=\E[%p1%d@, + il=\E[%p1%dL, + il1=\E[L, + ind=\n, + indn=\E[%p1%dS, + invis=\E[8m, + is2=\E[!p\E[?3;4l\E[4l\E>, + kDC=\E[3;2~, + kEND=\E[1;2F, + kHOM=\E[1;2H, + kIC=\E[2;2~, + kLFT=\E[1;2D, + kNXT=\E[6;2~, + kPRV=\E[5;2~, + kRIT=\E[1;2C, + kb2=\EOE, + kcbt=\E[Z, + kcub1=\EOD, + kcud1=\EOB, + kcuf1=\EOC, + kcuu1=\EOA, + kdch1=\E[3~, + kend=\EOF, + kent=\EOM, + kf1=\EOP, + kf10=\E[21~, + kf11=\E[23~, + kf12=\E[24~, + kf13=\EO2P, + kf14=\EO2Q, + kf15=\EO2R, + kf16=\EO2S, + kf17=\E[15;2~, + kf18=\E[17;2~, + kf19=\E[18;2~, + kf2=\EOQ, + kf20=\E[19;2~, + kf21=\E[20;2~, + kf22=\E[21;2~, + kf23=\E[23;2~, + kf24=\E[24;2~, + kf25=\EO5P, + kf26=\EO5Q, + kf27=\EO5R, + kf28=\EO5S, + kf29=\E[15;5~, + kf3=\EOR, + kf30=\E[17;5~, + kf31=\E[18;5~, + kf32=\E[19;5~, + kf33=\E[20;5~, + kf34=\E[21;5~, + kf35=\E[23;5~, + kf36=\E[24;5~, + kf37=\EO6P, + kf38=\EO6Q, + kf39=\EO6R, + kf4=\EOS, + kf40=\EO6S, + kf41=\E[15;6~, + kf42=\E[17;6~, + kf43=\E[18;6~, + kf44=\E[19;6~, + kf45=\E[20;6~, + kf46=\E[21;6~, + kf47=\E[23;6~, + kf48=\E[24;6~, + kf5=\E[15~, + kf6=\E[17~, + kf7=\E[18~, + kf8=\E[19~, + kf9=\E[20~, + khome=\EOH, + kich1=\E[2~, + kmous=\E[M, + knp=\E[6~, + kpp=\E[5~, + mc0=\E[i, + mc4=\E[4i, + mc5=\E[5i, + meml=\El, + memu=\Em, + op=\E[39;49m, + rc=\E8, + rev=\E[7m, + ri=\EM, + rin=\E[%p1%dT, + rmacs=^O, + rmam=\E[?7l, + rmir=\E[4l, + rmkx=\E[?1l\E>, + rmso=\E[27m, + rmul=\E[24m, + rs1=\Ec, + rs2=\E[!p\E[?3;4l\E[4l\E>, + sc=\E7, + setab=\E[4%p1%dm, + setaf=\E[3%p1%dm, + setb=\E[4 + %? + %p1%{1}%= + %t4 + %e + %p1%{3}%= + %t6 + %e + %p1%{4}%= + %t1 + %e + %p1%{6}%= + %t3 + %e + %p1%d + %; + m, + setf=\E[3 + %? + %p1%{1}%= + %t4 + %e + %p1%{3}%= + %t6 + %e + %p1%{4}%= + %t1 + %e + %p1%{6}%= + %t3 + %e + %p1%d + %; + m, + sgr=\E[0 + %? + %p6 + %t;1 + %; + %? + %p2 + %t;4 + %; + %? + %p1%p3%| + %t;7 + %; + %? + %p4 + %t;5 + %; + %? + %p7 + %t;8 + %; + m + %? + %p9 + %t\016 + %e + \017 + %;, + sgr0=\E[m\017, + smacs=^N, + smam=\E[?7h, + smir=\E[4h, + smkx=\E[?1h\E=, + smso=\E[7m, + smul=\E[4m, + tbc=\E[3g, + u6=\E[%i%d;%dR, + u7=\E[6n, + u8=\E[?1;2c, + u9=\E[c, + vpa=\E[%i%p1%dd, + ka2=\EOx, + kb1=\EOt, + kb3=\EOv, + kc2=\EOr, + use=xterm+alt1049, + use=xterm+kbs, +xterm-xfree86|xterm terminal emulator (XFree86 4.4 Window System), + use=xterm-xf86-v44, +# +# Compatible with the R6 xterm, with the following changes: +# + added acsc (perhaps some versions of tic assume the standard vt100 +# alternate character set) +# + added u6, u7, u8, u9 strings for Daniel Weaver's tack program. +# + added kmous string for ncurses. +# + added khome/kend strings (which conflict with kfnd/kslt, see note). +xterm-r6|xterm X11R6 version, + OTbs, + am, + km, + mir, + msgr, + xenl, + cols#80, + it#8, + lines#24, + acsc=``aaffggiijjkkllmmnnooppqqr + rssttuuvvwwxxyyzz{{||}}~~, + bel=^G, + bold=\E[1m, + clear=\E[H\E[2J, + cr=\r, + csr=\E[%i%p1%d;%p2%dr, + cub=\E[%p1%dD, + cub1=^H, + cud=\E[%p1%dB, + cud1=\n, + cuf=\E[%p1%dC, + cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, + cuu=\E[%p1%dA, + cuu1=\E[A, + dch=\E[%p1%dP, + dch1=\E[P, + dl=\E[%p1%dM, + dl1=\E[M, + ed=\E[J, + el=\E[K, + enacs=\E)0, + home=\E[H, + ht=^I, + hts=\EH, + il=\E[%p1%dL, + il1=\E[L, + ind=\n, + is2=\E[m\E[?7h\E[4l\E>\E7\E[r\E[ + ?1;3;4;6l\E8, + kcub1=\EOD, + kcud1=\EOB, + kcuf1=\EOC, + kcuu1=\EOA, + kdch1=\E[3~, + kf1=\E[11~, + kf10=\E[21~, + kf11=\E[23~, + kf12=\E[24~, + kf13=\E[25~, + kf14=\E[26~, + kf15=\E[28~, + kf16=\E[29~, + kf17=\E[31~, + kf18=\E[32~, + kf19=\E[33~, + kf2=\E[12~, + kf20=\E[34~, + kf3=\E[13~, + kf4=\E[14~, + kf5=\E[15~, + kf6=\E[17~, + kf7=\E[18~, + kf8=\E[19~, + kf9=\E[20~, + kmous=\E[M, + meml=\El, + memu=\Em, + rc=\E8, + rev=\E[7m, + ri=\EM, + rmacs=^O, + rmcup=\E[2J\E[?47l\E8, + rmir=\E[4l, + rmkx=\E[?1l\E>, + rmso=\E[m, + rmul=\E[m, + rs2=\E[m\E[?7h\E[4l\E>\E7\E[r\E[ + ?1;3;4;6l\E8, + sc=\E7, + sgr0=\E[m, + smacs=^N, + smcup=\E7\E[?47h, + smir=\E[4h, + smkx=\E[?1h\E=, + smso=\E[7m, + smul=\E[4m, + tbc=\E[3g, + u6=\E[%i%d;%dR, + u7=\E[6n, + u8=\E[?1;2c, + u9=\E[c, + use=xterm+kbs, + use=xterm+decedit, +xterm-old|antique xterm version, + use=xterm-r6, +# +# Compatible with the R5 xterm, with the following changes: +# + changed 'blink=@', to 'blink@' (the former meant that "@" would start +# a blink, the latter that it is not supported). +# + changed kf1 through kf4 to correspond with actual usage. Though X +# supports keypad symbols for PF1 to PF4, and xterm interprets these +# correctly, the F1 to F4 codes are commonly (but incorrectly) used. +# + moved reset string from rs1 to rs2, to correlate better with termcap. +# + make khome consistent with other entries. +# + use rmul/smul, rmir/smir from termcap, but not rmcup/smcup because +# not everyone wants the alternate screen. +# + added u6, u7, u8, u9 strings for Daniel Weaver's tack program. +# + added kmous string for ncurses. +xterm-r5|xterm R5 version, + OTbs, + am, + km, + msgr, + xenl, + cols#80, + it#8, + lines#24, + bel=^G, + bold=\E[1m, + clear=\E[H\E[2J, + cr=\r, + csr=\E[%i%p1%d;%p2%dr, + cub=\E[%p1%dD, + cub1=^H, + cud=\E[%p1%dB, + cud1=\n, + cuf=\E[%p1%dC, + cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, + cuu=\E[%p1%dA, + cuu1=\E[A, + dch=\E[%p1%dP, + dch1=\E[P, + dl=\E[%p1%dM, + dl1=\E[M, + ed=\E[J, + el=\E[K, + home=\E[H, + ht=^I, + hts=\EH, + ich=\E[%p1%d@, + ich1=\E[@, + il=\E[%p1%dL, + il1=\E[L, + ind=\n, + kcub1=\EOD, + kcud1=\EOB, + kcuf1=\EOC, + kcuu1=\EOA, + kdch1=\E[3~, + kdl1=\E[31~, + kel=\E[8~, + kend=\E[4~, + kf0=\EOq, + kf1=\E[11~, + kf10=\E[21~, + kf11=\E[23~, + kf12=\E[24~, + kf2=\E[12~, + kf3=\E[13~, + kf4=\E[14~, + kf5=\E[15~, + kf6=\E[17~, + kf7=\E[18~, + kf8=\E[19~, + kf9=\E[20~, + khome=\E[1~, + kich1=\E[2~, + kil1=\E[30~, + kmous=\E[M, + knp=\E[6~, + kpp=\E[5~, + rc=\E8, + rev=\E[7m, + ri=\EM, + rmir=\E[4l, + rmkx=\E[?1l\E>, + rmso=\E[m, + rmul=\E[m, + rs2=\E>\E[?1;3;4;5;6l\E[4l\E[?7h + \E[m\E[r\E[2J\E[H, + sc=\E7, + sgr=\E[ + %? + %p1 + %t;7 + %; + %? + %p2 + %t;4 + %; + %? + %p3 + %t;7 + %; + %? + %p4 + %t;5 + %; + %? + %p6 + %t;1 + %; + m, + sgr0=\E[m, + smir=\E[4h, + smkx=\E[?1h\E=, + smso=\E[7m, + smul=\E[4m, + tbc=\E[3g, + u6=\E[%i%d;%dR, + u7=\E[6n, + u8=\E[?1;2c, + u9=\E[c, + use=xterm+kbs, +# +# +# Customization begins here. +# +# This is the only entry which you should have to customize, since "xterm" +# is widely used for a variety of incompatible terminal emulations including +# color_xterm and rxvt. +xterm|X11 terminal emulator, +# use=xterm-new, +# use=xterm-r6, +# For compatibility purposes, use the same contents as the xterm-new entry, +# but without "use=ansi+rep," + npc, + indn=\E[%p1%dS, + kb2=\EOE, + kcbt=\E[Z, + kent=\EOM, + rin=\E[%p1%dT, +# use=ansi+rep, + use=ecma+strikeout, + use=xterm+pcfkeys, + use=xterm+tmux, + use=xterm-basic, + +# This fragment is for people who cannot agree on what the backspace key +# should send. +xterm+kbs|fragment for backspace key, + kbs=^H, +# kbs=^?, |