3 files changed, 133 insertions, 0 deletions
diff --git a/source/l/sg3_utils/sg3_utils.SlackBuild b/source/l/sg3_utils/sg3_utils.SlackBuild
new file mode 100755
index 00000000..935f6f8c
--- /dev/null
+++ b/source/l/sg3_utils/sg3_utils.SlackBuild
@@ -0,0 +1,113 @@
+#!/bin/sh
+
+# Slackware build script for sg3_utils
+
+# Copyright 2010  Robby Workman  Northport, AL, USA
+# Copyright 2010, 2011, 2012  Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PKGNAM=sg3_utils
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+NUMJOBS=${NUMJOBS:--j7}
+
+# Automatically determine the architecture we're building on:
+MARCH=$( uname -m )
+if [ -z "$ARCH" ]; then
+  case "$MARCH" in
+    i?86)    export ARCH=i486 ;;
+    armv7hl) export ARCH=$MARCH ;;
+    arm*)    export ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *)       export ARCH=$MARCH ;;
+  esac
+fi
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+elif [ "$ARCH" = "armv7hl" ]; then
+  SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16"
+  LIBDIRSUFFIX=""
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+case "$ARCH" in
+    arm*) TARGET=$ARCH-slackware-linux-gnueabi ;;
+    *)    TARGET=$ARCH-slackware-linux ;;
+esac
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.?z* || exit 1
+cd $PKGNAM-$VERSION || exit 1
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --localstatedir=/var \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --build=$TARGET
+
+make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+find $PKG/usr/man -type f -exec gzip -9 {} \;
+for i in $( find $PKG/usr/man -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done
+
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
+cp -a \
+  AUTHORS BSD_LICENSE COPYING COVERAGE CREDITS ChangeLog NEWS README* \
+  $PKG/usr/doc/$PKGNAM-$VERSION
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/source/l/sg3_utils/sg3_utils.info b/source/l/sg3_utils/sg3_utils.info
new file mode 100644
index 00000000..f429377e
--- /dev/null
+++ b/source/l/sg3_utils/sg3_utils.info
@@ -0,0 +1 @@
+http://sg.danny.cz/sg/p/
diff --git a/source/l/sg3_utils/slack-desc b/source/l/sg3_utils/slack-desc
new file mode 100644
index 00000000..b086caf6
--- /dev/null
+++ b/source/l/sg3_utils/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+         |-----handy-ruler------------------------------------------------------|
+sg3_utils: sg3_utils (utilities and test programs for the linux sg driver)
+sg3_utils:
+sg3_utils: This package contains low level utilities for devices that use a SCSI
+sg3_utils: command set. Apart from SCSI parallel interface (SPI) devices, the 
+sg3_utils: SCSI command set is used by ATAPI devices (CD/DVDs and tapes), USB 
+sg3_utils: mass storage devices, Fibre Channel disks, IEEE 1394 storage devices
+sg3_utils: (that use the "SBP" protocol), SAS, iSCSI and FCoE devices (among 
+sg3_utils: others).
+sg3_utils:
+sg3_utils: Homepage: http://sg.danny.cz/sg/sg3_utils.html
+sg3_utils: