1 files changed, 134 insertions, 0 deletions
diff --git a/source/n/netatalk/netatalk.SlackBuild b/source/n/netatalk/netatalk.SlackBuild
new file mode 100755
index 00000000..1bffea9f
--- /dev/null
+++ b/source/n/netatalk/netatalk.SlackBuild
@@ -0,0 +1,134 @@
+#!/bin/sh
+
+# Copyright 2008, 2009  Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+VERSION=2.0.4
+ARCH=${ARCH:-x86_64}
+BUILD=${BUILD:-2}
+
+NUMJOBS=${NUMJOBS:-" -j7 "}
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-netatalk
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+cd $TMP
+rm -rf netatalk-$VERSION
+tar xvf $CWD/netatalk-$VERSION.tar.xz || exit 1
+cd netatalk-$VERSION || exit 1
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \; -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \;
+
+# Fixup some paths in etc2ps.sh
+zcat $CWD/netatalk.etc2ps.diff.gz | patch -p1 || exit 1
+
+# Allow building without xfs quota support
+zcat $CWD/netatalk-2.0.4-without_xfs.diff.gz | patch -p1 || exit 1
+
+# Disallow transmission of passwords via cleartext and with old version 1 of
+# the Diffie-Hellman protocol
+zcat $CWD/netatalk-2.0.4-afpdconf.diff.gz | patch -p1 || exit 1
+
+autoreconf -vif
+CFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --mandir=/usr/man \
+  --sysconfdir=/etc \
+  --libexecdir=/usr/sbin \
+  --localstatedir=/var \
+  --disable-static \
+  --with-shadow \
+  --without-xfs \
+  --build=$ARCH-slackware-linux
+
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" \
+  | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+
+gzip -9 $PKG/usr/man/man?/*
+
+# This is normally installed setuid root, but I'm not 100% sure I trust it yet.
+# I see it uses strcpy() in a few places...
+chmod 755 $PKG/usr/bin/afppasswd
+
+# Install the afppasswd config file
+mkdir -p $PKG/etc/netatalk
+cat $CWD/afppasswd > $PKG/etc/netatalk/afppasswd
+
+# Install an init script
+mkdir -p $PKG/etc/rc.d
+cat $CWD/rc.atalk.new > $PKG/etc/rc.d/rc.atalk.new
+chmod 644 $PKG/etc/rc.d/rc.atalk.new
+
+mkdir -p $PKG/install
+zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+( cd $PKG/etc/netatalk
+  for file in AppleVolumes.default AppleVolumes.system afpd.conf afppasswd atalkd.conf netatalk.conf papd.conf ; do
+    mv $file ${file}.new
+    echo "config etc/netatalk/${file}.new" >> $PKG/install/doinst.sh
+  done
+)
+echo "rm -f etc/netatalk/afppasswd.new" >> $PKG/install/doinst.sh
+
+mkdir -p $PKG/usr/doc/netatalk-$VERSION
+cp -a \
+  CONTRIBUTORS COPYING COPYRIGHT NEWS README TODO VERSION doc/* \
+  $PKG/usr/doc/netatalk-$VERSION
+# -1, Redundant
+rm -rf $PKG/usr/doc/netatalk-$VERSION/doc/Makefile* \
+       $PKG/usr/doc/netatalk-$VERSION/doc/htmldocs \
+       $PKG/usr/doc/netatalk-$VERSION/doc/*.pdf
+
+# "make install" creates this directory with chmod 0777
+# I'd rather use 755, but I'll assume since this is a
+# new directory that it is needed for something.  This
+# will help it a bit anyway...
+chmod 1777 $PKG/var/spool/netatalk
+# If anyone can confirm that 755 would still work let me know.
+
+# Build the package:
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/netatalk-$VERSION-$ARCH-$BUILD.txz
+